summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/traps.c
AgeCommit message (Collapse)Author
2011-08-12Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip: x86-64: Rework vsyscall emulation and add vsyscall= parameter x86-64: Wire up getcpu syscall x86: Remove unnecessary compile flag tweaks for vsyscall code x86-64: Add vsyscall:emulate_vsyscall trace event x86-64: Add user_64bit_mode paravirt op x86-64, xen: Enable the vvar mapping x86-64: Work around gold bug 13023 x86-64: Move the "user" vsyscall segment out of the data segment. x86-64: Pad vDSO to a page boundary
2011-08-10x86-64: Rework vsyscall emulation and add vsyscall= parameterAndy Lutomirski
There are three choices: vsyscall=native: Vsyscalls are native code that issues the corresponding syscalls. vsyscall=emulate (default): Vsyscalls are emulated by instruction fault traps, tested in the bad_area path. The actual contents of the vsyscall page is the same as the vsyscall=native case except that it's marked NX. This way programs that make assumptions about what the code in the page does will not be confused when they read that code. vsyscall=none: Trying to execute a vsyscall will segfault. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-07x86-64: Emulate legacy vsyscallsAndy Lutomirski
There's a fair amount of code in the vsyscall page. It contains a syscall instruction (in the gettimeofday fallback) and who knows what will happen if an exploit jumps into the middle of some other code. Reduce the risk by replacing the vsyscalls with short magic incantations that cause the kernel to emulate the real vsyscalls. These incantations are useless if entered in the middle. This causes vsyscalls to be a little more expensive than real syscalls. Fortunately sensible programs don't use them. The only exception is time() which is still called by glibc through the vsyscall - but calling time() millions of times per second is not sensible. glibc has this fixed in the development tree. This patch is not perfect: the vread_tsc and vread_hpet functions are still at a fixed address. Fixing that might involve making alternative patching work in the vDSO. Signed-off-by: Andy Lutomirski <luto@mit.edu> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Jan Beulich <JBeulich@novell.com> Cc: richard -rw- weinberger <richard.weinberger@gmail.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Cc: Andi Kleen <andi@firstfloor.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Louis Rilling <Louis.Rilling@kerlabs.com> Cc: Valdis.Kletnieks@vt.edu Cc: pageexec@freemail.hu Link: http://lkml.kernel.org/r/e64e1b3c64858820d12c48fa739efbd1485e79d5.1307292171.git.luto@mit.edu [ Removed the CONFIG option - it's simpler to just do it unconditionally. Tidied up the code as well. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Clean-up default_do_nmi()Don Zickus
Just re-arrange the code a bit to make it easier to follow what is going on. Basically un-negating the if-statement and swapping the code inside the if-statement with code outside. No functional changes. Originally-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPUDon Zickus
In original NMI handler, NMI reason io port (0x61) is only processed on BSP. This makes it impossible to hot-remove BSP. To solve the issue, a raw spinlock is used to allow the port to be processed on any CPU. Originally-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Remove DIE_NMI_IPIDon Zickus
With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Add NMI symbol constants and rename memory parity to PCI SERRHuang Ying
Replace the NMI related magic numbers with symbol constants. Memory parity error is only valid for IBM PC-AT, newer machine use bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually reported via MCE. So corresponding function name and kernel log string is changed. But on some machines, PCI SERR line is still used to report memory errors. This is used by EDAC, so corresponding EDAC call is reserved. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05x86, NMI: Add touch_nmi_watchdog to io_check_error delayHuang Ying
Prevent the long delay in io_check_error making NMI watchdog timeout. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> LKML-Reference: <1294198689-15447-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-10x86, NMI: Add back unknown_nmi_panic and nmi_watchdog sysctlsDon Zickus
Originally adapted from Huang Ying's patch which moved the unknown_nmi_panic to the traps.c file. Because the old nmi watchdog was deleted before this change happened, the unknown_nmi_panic sysctl was lost. This re-adds it. Also, the nmi_watchdog sysctl was re-implemented and its documentation updated accordingly. Patch-inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: fweisbec@gmail.com LKML-Reference: <1291068437-5331-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdogDon Zickus
Now that the bulk of the old nmi_watchdog is gone, remove all the stub variables and hooks associated with it. This touches lots of files mainly because of how the io_apic nmi_watchdog was implemented. Now that the io_apic nmi_watchdog is forever gone, remove all its fingers. Most of this code was not being exercised by virtue of nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to risky here. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: gorcunov@openvz.org LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86, nmi_watchdog: Remove the old nmi_watchdogDon Zickus
Now that we have a new nmi_watchdog that is more generic and sits on top of the perf subsystem, we really do not need the old nmi_watchdog any more. In addition, the old nmi_watchdog doesn't really work if you are using the default clocksource, hpet. The old nmi_watchdog code relied on local apic interrupts to determine if the cpu is still alive. With hpet as the clocksource, these interrupts don't increment any more and the old nmi_watchdog triggers false postives. This piece removes the old nmi_watchdog code and stubs out any variables and functions calls. The stubs are the same ones used by the new nmi_watchdog code, so it should be well tested. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: gorcunov@openvz.org LKML-Reference: <1289578944-28564-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-23Merge branches 'softirq-for-linus', 'x86-debug-for-linus', ↵Linus Torvalds
'x86-numa-for-linus', 'x86-quirks-for-linus', 'x86-setup-for-linus', 'x86-uv-for-linus' and 'x86-vm86-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'softirq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softirqs: Make wakeup_softirqd static * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, asm: Restore parentheses around one pushl_cfi argument x86, asm: Fix ancient-GAS workaround x86, asm: Fix CFI macro invocations to deal with shortcomings in gas * 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, numa: Assign CPUs to nodes in round-robin manner on fake NUMA * 'x86-quirks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: HPET force enable for CX700 / VIA Epia LT * 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, setup: Use string copy operation to optimze copy in kernel compression * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV: Use allocated buffer in tlb_uv.c:tunables_read() * 'x86-vm86-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vm86: Fix preemption bug for int1 debug and int3 breakpoint handlers.
2010-09-23x86, vm86: Fix preemption bug for int1 debug and int3 breakpoint handlers.Bart Oldeman
Impact: fix kernel bug such as: BUG: scheduling while atomic: dosemu.bin/19680/0x00000004 See also Ubuntu bug 455067 at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/455067 Commits 4915a35e35a037254550a2ba9f367a812bc37d40 ("Use preempt_conditional_sti/cli in do_int3, like on x86_64.") and 3d2a71a596bd9c761c8487a2178e95f8a61da083 ("x86, traps: converge do_debug handlers") started disabling preemption in int1 and int3 handlers on i386. The problem with vm86 is that the call to handle_vm86_trap() may jump straight to entry_32.S and never returns so preempt is never enabled again, and there is an imbalance in the preempt count. Commit be716615fe596ee117292dc615e95f707fb67fd1 ("x86, vm86: fix preemption bug"), which was later (accidentally?) reverted by commit 08d68323d1f0c34452e614263b212ca556dae47f ("hw-breakpoints: modifying generic debug exception to use thread-specific debug registers") fixed the problem for debug exceptions but not for breakpoints. There are three solutions to this problem. 1. Reenable preemption before calling handle_vm86_trap(). This was the approach that was later reverted. 2. Do not disable preemption for i386 in breakpoint and debug handlers. This was the situation before October 2008. As far as I understand preemption only needs to be disabled on x86_64 because a seperate stack is used, but it's nice to have things work the same way on i386 and x86_64. 3. Let handle_vm86_trap() return instead of jumping to assembly code. By setting a flag in _TIF_WORK_MASK, either TIF_IRET or TIF_NOTIFY_RESUME, the code in entry_32.S is instructed to return to 32 bit mode from V86 mode. The logic in entry_32.S was already present to handle signals. (I chose TIF_IRET because it's slightly more efficient in do_notify_resume() in signal.c, but in fact TIF_IRET can probably be replaced by TIF_NOTIFY_RESUME everywhere.) I'm submitting approach 3, because I believe it is the most elegant and prevents future confusion. Still, an obvious preempt_conditional_cli(regs); is necessary in traps.c to correct the bug. [ hpa: This is technically a regression, but because: 1. the regression is so old, 2. the patch seems relatively high risk, justifying more testing, and 3. we're late in the 2.6.36-rc cycle, I'm queuing it up for the 2.6.37 merge window. It might, however, justify as a -stable backport at a latter time, hence Cc: stable. ] Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> LKML-Reference: <alpine.DEB.2.00.1009231312330.4732@localhost.localdomain> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander van Heukelum <heukelum@fastmail.fm> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-09x86-32, fpu: Remove math_emulate stubBrian Gerst
check_fpu() in bugs.c halts boot if no FPU is found and math emulation isn't enabled. Therefore this stub will never be used. Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1283563039-3466-9-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-09x86, fpu: Merge fpu_init()Brian Gerst
Make fpu_init() handle 32-bit setup. Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1283563039-3466-3-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-05Merge branch 'perf/nmi' into perf/coreIngo Molnar
Conflicts: kernel/Makefile Merge reason: Add the now complete topic, fix the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-30x86: Send a SIGTRAP for user icebp trapsFrederic Weisbecker
Before we had a generic breakpoint layer, x86 used to send a sigtrap for any debug event that happened in userspace, except if it was caused by lazy dr7 switches. Currently we only send such signal for single step or breakpoint events. However, there are three other kind of debug exceptions: - debug register access detected: trigger an exception if the next instruction touches the debug registers. We don't use it. - task switch, but we don't use tss. - icebp/int01 trap. This instruction (0xf1) is undocumented and generates an int 1 exception. Unlike single step through TF flag, it doesn't set the single step origin of the exception in dr6. icebp then used to be reported in userspace using trap signals but this have been incidentally broken with the new breakpoint code. Reenable this. Since this is the only debug event that doesn't set anything in dr6, this is all we have to check. This fixes a regression in Wine where World Of Warcraft got broken as it uses this for software protection checks purposes. And probably other apps do. Reported-and-tested-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: 2.6.33.x 2.6.34.x <stable@kernel.org>
2010-05-20x86, kgdb: early trap init for early debugJan Kiszka
Allow the x86 arch to have early exception processing for the purpose of debugging via the kgdb. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20x86,kgdb: Add low level debug hookJason Wessel
The only way the debugger can handle a trap in inside rcu_lock, notify_die, or atomic_notifier_call_chain without a triple fault is to have a low level "first opportunity handler" in the int3 exception handler. Generally this will be something the vast majority of folks will not need, but for those who need it, it is added as a kernel .config option called KGDB_LOW_LEVEL_TRAP. CC: Ingo Molnar <mingo@elte.hu> CC: Thomas Gleixner <tglx@linutronix.de> CC: H. Peter Anvin <hpa@zytor.com> CC: x86@kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-18Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, fpu: Use static_cpu_has() to implement use_xsave() x86: Add new static_cpu_has() function using alternatives x86, fpu: Use the proper asm constraint in use_xsave() x86, fpu: Unbreak FPU emulation x86: Introduce 'struct fpu' and related API x86: Eliminate TS_XSAVE x86-32: Don't set ignore_fpu_irq in simd exception x86: Merge kernel_math_error() into math_error() x86: Merge simd_math_error() into math_error() x86-32: Rework cache flush denied handler Fix trivial conflict in arch/x86/kernel/process.c
2010-05-12lockup_detector: Combine nmi_watchdog and softlockup detectorDon Zickus
The new nmi_watchdog (which uses the perf event subsystem) is very similar in structure to the softlockup detector. Using Ingo's suggestion, I combined the two functionalities into one file: kernel/watchdog.c. Now both the nmi_watchdog (or hardlockup detector) and softlockup detector sit on top of the perf event subsystem, which is run every 60 seconds or so to see if there are any lockups. To detect hardlockups, cpus not responding to interrupts, I implemented an hrtimer that runs 5 times for every perf event overflow event. If that stops counting on a cpu, then the cpu is most likely in trouble. To detect softlockups, tasks not yielding to the scheduler, I used the previous kthread idea that now gets kicked every time the hrtimer fires. If the kthread isn't being scheduled neither is anyone else and the warning is printed to the console. I tested this on x86_64 and both the softlockup and hardlockup paths work. V2: - cleaned up the Kconfig and softlockup combination - surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI - seperated out the softlockup case from perf event subsystem - re-arranged the enabling/disabling nmi watchdog from proc space - added cpumasks for hardlockup failure cases - removed fallback to soft events if no PMU exists for hard events V3: - comment cleanups - drop support for older softlockup code - per_cpu cleanups - completely remove software clock base hardlockup detector - use per_cpu masking on hard/soft lockup detection - #ifdef cleanups - rename config option NMI_WATCHDOG to LOCKUP_DETECTOR - documentation additions V4: - documentation fixes - convert per_cpu to __get_cpu_var - powerpc compile fixes V5: - split apart warn flags for hard and soft lockups TODO: - figure out how to make an arch-agnostic clock2cycles call (if possible) to feed into perf events as a sample period [fweisbec: merged conflict patch] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-03x86-32: Don't set ignore_fpu_irq in simd exceptionBrian Gerst
Any processor that supports simd will have an internal fpu, and the irq13 handler will not be enabled. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1269176446-2489-5-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-05-03x86: Merge kernel_math_error() into math_error()Brian Gerst
Clean up the kernel exception handling and make it more similar to the other traps. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1269176446-2489-4-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-05-03x86: Merge simd_math_error() into math_error()Brian Gerst
The only difference between FPU and SIMD exceptions is where the status bits are read from (cwd/swd vs. mxcsr). This also fixes the discrepency introduced by commit adf77bac, which fixed FPU but not SIMD. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1269176446-2489-3-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-05-03x86-32: Rework cache flush denied handlerBrian Gerst
The cache flush denied error is an erratum on some AMD 486 clones. If an invd instruction is executed in userspace, the processor calls exception 19 (13 hex) instead of #GP (13 decimal). On cpus where XMM is not supported, redirect exception 19 to do_general_protection(). Also, remove die_if_kernel(), since this was the last user. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1269176446-2489-2-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-26x86, ptrace: Fix block-stepPeter Zijlstra
Implement ptrace-block-step using TIF_BLOCKSTEP which will set DEBUGCTLMSR_BTF when set for a task while preserving any other DEBUGCTLMSR bits. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100325135414.017536066@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-26x86, perf, bts, mm: Delete the never used BTS-ptrace codePeter Zijlstra
Support for the PMU's BTS features has been upstreamed in v2.6.32, but we still have the old and disabled ptrace-BTS, as Linus noticed it not so long ago. It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without regard for other uses (perf) and doesn't provide the flexibility needed for perf either. Its users are ptrace-block-step and ptrace-bts, since ptrace-bts was never used and ptrace-block-step can be implemented using a much simpler approach. So axe all 3000 lines of it. That includes the *locked_memory*() APIs in mm/mlock.c as well. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Markus Metzger <markus.t.metzger@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <20100325135413.938004390@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25nmi_watchdog: Clean up various small detailsDon Zickus
Mostly copy/paste whitespace damage with a couple of nitpicks by the checkpatch script. Fix the struct definition as requested by Ingo too. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: aris@redhat.com LKML-Reference: <1266880143-24943-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> -- arch/x86/kernel/apic/hw_nmi.c | 14 +++++------ arch/x86/kernel/traps.c | 6 ++-- include/linux/nmi.h | 2 - kernel/nmi_watchdog.c | 51 ++++++++++++++++++++---------------------- 4 files changed, 36 insertions(+), 37 deletions(-)
2010-02-08nmi_watchdog: Config option to enable new nmi_watchdogDon Zickus
These are the bits that enable the new nmi_watchdog and safely isolate the old nmi_watchdog. Only one or the other can run, not both at the same time. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: gorcunov@gmail.com Cc: aris@redhat.com Cc: peterz@infradead.org LKML-Reference: <1265424425-31562-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-08x86: Move notify_die from nmi.c to traps.cDon Zickus
In order to handle a new nmi_watchdog approach, I need to move the notify_die() routine out of nmi_watchdog_tick() and into default_do_nmi(). This lets me easily swap out the old nmi_watchdog with the new one with just a config change. The change probably makes sense from a high level perspective because the nmi_watchdog shouldn't be handling notify_die routines anyway. However, this move does change the semantics a little bit. Instead of checking on every nmi interrupt if the cpus are stuck, only check them on the nmi_watchdog interrupts. v2: Move notify_die call into #idef block Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: gorcunov@gmail.com Cc: aris@redhat.com Cc: peterz@infradead.org LKML-Reference: <1265424425-31562-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-29x86/debug: Clear reserved bits of DR6 in do_debug()K.Prasad
Clear the reserved bits from the stored copy of debug status register (DR6). This will help easy bitwise operations such as quick testing of a debug event origin. Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20100128111401.GB13935@in.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-18Merge commit 'perf/core' into perf/hw-breakpointFrederic Weisbecker
Conflicts: kernel/Makefile kernel/trace/Makefile kernel/trace/trace.h samples/Makefile Merge reason: We need to be uptodate with the perf events development branch because we plan to rewrite the breakpoints API on top of perf events.
2009-09-26Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Remove redundant non-NUMA topology functions x86: early_printk: Protect against using the same device twice x86: Reduce verbosity of "PAT enabled" kernel message x86: Reduce verbosity of "TSC is reliable" message x86: mce: Use safer ways to access MCE registers x86: mce, inject: Use real inject-msg in raise_local x86: mce: Fix thermal throttling message storm x86: mce: Clean up thermal throttling state tracking code x86: split NX setup into separate file to limit unstack-protected code xen: check EFER for NX before setting up GDT mapping x86: Cleanup linker script using new linker script macros. x86: Use section .data.page_aligned for the idt_table. x86: convert to use __HEAD and HEAD_TEXT macros. x86: convert compressed loader to use __HEAD and HEAD_TEXT macros. x86: fix fragile computation of vsyscall address
2009-09-25Merge branch 'x86/asm' into x86/urgentIngo Molnar
Merge reason: The linker script cleanups are ready for upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-23headers: utsname.h reduxAlexey Dobriyan
* remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-20includecheck fix: x86, traps.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: arch/x86/kernel/traps.c: asm/traps.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247065094.4382.49.camel@ht.satnam>
2009-09-18Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits) x86: Move get/set_wallclock to x86_platform_ops x86: platform: Fix section annotations x86: apic namespace cleanup x86: Distangle ioapic and i8259 x86: Add Moorestown early detection x86: Add hardware_subarch ID for Moorestown x86: Add early platform detection x86: Move tsc_init to late_time_init x86: Move tsc_calibration to x86_init_ops x86: Replace the now identical time_32/64.c by time.c x86: time_32/64.c unify profile_pc x86: Move calibrate_cpu to tsc.c x86: Make timer setup and global variables the same in time_32/64.c x86: Remove mca bus ifdef from timer interrupt x86: Simplify timer_ack magic in time_32.c x86: Prepare unification of time_32/64.c x86: Remove do_timer hook x86: Add timer_init to x86_init_ops x86: Move percpu clockevents setup to x86_init_ops x86: Move xen_post_allocator_init into xen_pagetable_setup_done ... Fix up conflicts in arch/x86/include/asm/io_apic.h
2009-09-18x86: Use section .data.page_aligned for the idt_table.Tim Abbott
The .data.idt section is just squashed into the .data.page_aligned output section by the linker script anyway, so it might as well be in the .data.page_aligned section. This eliminates all references to .data.idt on x86. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-15Merge branch 'linus' into tracing/hw-breakpointsIngo Molnar
Conflicts: arch/x86/kernel/process_64.c Semantic conflict fixed in: arch/x86/kvm/x86.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64: move clts into batch cpu state updates when preloading fpu x86-64: move unlazy_fpu() into lazy cpu state part of context switch x86-32: make sure clts is batched during context switch x86: split out core __math_state_restore
2009-09-14Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Make memtype_seq_ops const x86: uv: Clean up uv_ptc_init(), use proc_create() x86: Use printk_once() x86/cpu: Clean up various files a bit x86: Remove duplicated #include x86, ipi: Clean up safe_smp_processor_id() by using the cpu_has_apic() macro helper x86: Clean up idt_descr and idt_tableby using NR_VECTORS instead of hardcoded number x86: Further clean up of mtrr/generic.c x86: Clean up mtrr/main.c x86: Clean up mtrr/state.c x86: Clean up mtrr/mtrr.h x86: Clean up mtrr/if.c x86: Clean up mtrr/generic.c x86: Clean up mtrr/cyrix.c x86: Clean up mtrr/cleanup.c x86: Clean up mtrr/centaur.c x86: Clean up mtrr/amd.c: x86: ds.c fix invalid assignment
2009-09-07Merge branch 'tracing/core' into tracing/hw-breakpointsIngo Molnar
Conflicts: arch/Kconfig kernel/trace/trace.h Merge reason: resolve the conflicts, plus adopt to the new ring-buffer APIs. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31x86: Move traps_init to x86_init_opsThomas Gleixner
Replace the quirks by a simple x86_init_ops function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-07-19x86: Remove unused patch_espfix_desc()Akinobu Mita
patch_espfix_desc() is not used after commit dc4c2a0aed3b09f6e255bd5c3faa50fe6e0b2ded Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> LKML-Reference: <20090718150955.GB11294@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-10x86: Clean up idt_descr and idt_tableby using NR_VECTORS instead of ↵Cyrill Gorcunov
hardcoded number Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20090708180353.GH5301@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25x86: Add sysctl to allow panic on IOCK NMI errorKurt Garloff
This patch introduces a new sysctl: /proc/sys/kernel/panic_on_io_nmi which defaults to 0 (off). When enabled, the kernel panics when the kernel receives an NMI caused by an IO error. The IO error triggered NMI indicates a serious system condition, which could result in IO data corruption. Rather than contiuing, panicing and dumping might be a better choice, so one can figure out what's causing the IO error. This could be especially important to companies running IO intensive applications where corruption must be avoided, e.g. a bank's databases. [ SuSE has been shipping it for a while, it was done at the request of a large database vendor, for their users. ] Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: Roberto Angelino <robertangelino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> LKML-Reference: <20090624213211.GA11291@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-20Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (45 commits) x86, mce: fix error path in mce_create_device() x86: use zalloc_cpumask_var for mce_dev_initialized x86: fix duplicated sysfs attribute x86: de-assembler-ize asm/desc.h i386: fix/simplify espfix stack switching, move it into assembly i386: fix return to 16-bit stack from NMI handler x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present x86: Remove duplicated #include's x86: msr.h linux/types.h is only required for __KERNEL__ x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround x86, mce: mce_intel.c needs <asm/apic.h> x86: apic/io_apic.c: dmar_msi_type should be static x86, io_apic.c: Work around compiler warning x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present x86: mce: Handle banks == 0 case in K7 quirk x86, boot: use .code16gcc instead of .code16 x86: correct the conversion of EFI memory types x86: cap iomem_resource to addressable physical memory x86, mce: rename _64.c files which are no longer 64-bit-specific x86, mce: mce.h cleanup ... Manually fix up trivial conflict in arch/x86/mm/fault.c
2009-06-17x86: split out core __math_state_restoreJeremy Fitzhardinge
Split the core fpu state restoration out into __math_state_restore, which assumes that cr0.TS is clear and that the fpu context has been initialized. This will be used during context switch. There are two reasons this is desireable: - There's a small clarification. When __switch_to() calls math_state_restore, it relies on the fact that tsk_used_math() returns true, and so will never do a blocking init_fpu(). __math_state_restore() does not have (or need) that logic, so the question never arises. - It allows the clts() to be moved earler in __switch_to() so it can be performed while cpu context updates are batched (will be done in a later patch). [ Impact: refactor code to make reuse cleaner; no functional change ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Rusty Russell <rusty@rustcorp.com.au>
2009-06-17Merge branch 'linus' into tracing/hw-breakpointsIngo Molnar
Conflicts: arch/x86/Kconfig arch/x86/kernel/traps.c arch/x86/power/cpu.c arch/x86/power/cpu_32.c kernel/Makefile Semantic conflict: arch/x86/kernel/hw_breakpoint.c Merge reason: Resolve the conflicts, move from put_cpu_no_sched() to put_cpu() in arch/x86/kernel/hw_breakpoint.c. Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-13 22:06:44 +0000