summaryrefslogtreecommitdiff
path: root/arch/x86/kvm/lapic.c
AgeCommit message (Collapse)Author
2017-12-05KVM: lapic: Fixup LDR on load in x2apicDr. David Alan Gilbert
commit 12806ba937382fdfdbad62a399aa2dce65c10fcd upstream. In x2apic mode the LDR is fixed based on the ID rather than separately loadable like it was before x2. When kvm_apic_set_state is called, the base is set, and if it has the X2APIC_ENABLE flag set then the LDR is calculated; however that value gets overwritten by the memcpy a few lines below overwriting it with the value that came from userland. The symptom is a lack of EOI after loading the state (e.g. after a QEMU migration) and is due to the EOI bitmap being wrong due to the incorrect LDR. This was seen with a Win2016 guest under Qemu with irqchip=split whose USB mouse didn't work after a VM migration. This corresponds to RH bug: https://bugzilla.redhat.com/show_bug.cgi?id=1502591 Reported-by: Yiqian Wei <yiwei@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> [Applied fixup from Liran Alon. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05KVM: lapic: Split out x2apic ldr calculationDr. David Alan Gilbert
commit e872fa94662d0644057c7c80b3071bdb9249e5ab upstream. Split out the ldr calculation from kvm_apic_set_x2apic_id since we're about to reuse it in the following patch. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19KVM: x86: flush pending lapic jump label updates on module unloadDavid Matlack
commit cef84c302fe051744b983a92764d3fcca933415d upstream. KVM's lapic emulation uses static_key_deferred (apic_{hw,sw}_disabled). These are implemented with delayed_work structs which can still be pending when the KVM module is unloaded. We've seen this cause kernel panics when the kvm_intel module is quickly reloaded. Use the new static_key_deferred_flush() API to flush pending updates on module unload. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-24KVM: x86: fix out-of-bounds access in lapicRadim Krčmář
Cluster xAPIC delivery incorrectly assumed that dest_id <= 0xff. With enabled KVM_X2APIC_API_USE_32BIT_IDS in KVM_CAP_X2APIC_API, a userspace can send an interrupt with dest_id that results in out-of-bounds access. Found by syzkaller: BUG: KASAN: slab-out-of-bounds in kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 at addr ffff88003d9ca750 Read of size 8 by task syz-executor/22923 CPU: 0 PID: 22923 Comm: syz-executor Not tainted 4.9.0-rc4+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [...] Call Trace: [...] __dump_stack lib/dump_stack.c:15 [...] dump_stack+0xb3/0x118 lib/dump_stack.c:51 [...] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 [...] print_address_description mm/kasan/report.c:194 [...] kasan_report_error mm/kasan/report.c:283 [...] kasan_report+0x231/0x500 mm/kasan/report.c:303 [...] __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:329 [...] kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 arch/x86/kvm/lapic.c:824 [...] kvm_irq_delivery_to_apic+0x132/0x9a0 arch/x86/kvm/irq_comm.c:72 [...] kvm_set_msi+0x111/0x160 arch/x86/kvm/irq_comm.c:157 [...] kvm_send_userspace_msi+0x201/0x280 arch/x86/kvm/../../../virt/kvm/irqchip.c:74 [...] kvm_vm_ioctl+0xba5/0x1670 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3015 [...] vfs_ioctl fs/ioctl.c:43 [...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679 [...] SYSC_ioctl fs/ioctl.c:694 [...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 [...] entry_SYSCALL_64_fastpath+0x1f/0xc2 Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Fixes: e45115b62f9a ("KVM: x86: use physical LAPIC array for logical x2APIC") Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-19KVM: lapic: don't recalculate apic map table twice when enabling LAPICWanpeng Li
APIC map table is recalculated during reset APIC ID to the initial value when enabling LAPIC. This patch move the recalculate_apic_map() to the next branch since we don't need to recalculate apic map twice in current codes. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-04KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=offWanpeng Li
BUG: unable to handle kernel NULL pointer dereference at 000000000000008c IP: [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm] PGD 0 Oops: 0000 [#1] SMP Call Trace: kvm_arch_vcpu_load+0x86/0x260 [kvm] vcpu_load+0x46/0x60 [kvm] kvm_vcpu_ioctl+0x79/0x7c0 [kvm] ? __lock_is_held+0x54/0x70 do_vfs_ioctl+0x96/0x6a0 ? __fget_light+0x2a/0x90 SyS_ioctl+0x79/0x90 do_syscall_64+0x7c/0x1e0 entry_SYSCALL64_slow_path+0x25/0x25 RIP [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm] RSP <ffff8800db1f3d70> CR2: 000000000000008c ---[ end trace a55fb79d2b3b4ee8 ]--- This can be reproduced steadily by kernel_irqchip=off. We should not access preemption timer stuff if lapic is emulated in userspace. This patch fix it by avoiding access preemption timer stuff when kernel_irqchip=off. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...
2016-07-14x86/kvm: Audit and remove any unnecessary uses of module.hPaul Gortmaker
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of kvm where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. Several instances got replaced with moduleparam.h since that was really all that was required for those particular files. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/20160714001901.31603-8-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14KVM: x86: bump KVM_MAX_VCPU_ID to 1023Radim Krčmář
kzalloc was replaced with kvm_kvzalloc to allow non-contiguous areas and rcu had to be modified to cope with it. The practical limit for KVM_MAX_VCPU_ID right now is INT_MAX, but lower value was chosen in case there were bugs. 1023 is sufficient maximum APIC ID for 288 VCPUs. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14KVM: x86: add a flag to disable KVM x2apic broadcast quirkRadim Krčmář
Add KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK as a feature flag to KVM_CAP_X2APIC_API. The quirk made KVM interpret 0xff as a broadcast even in x2APIC mode. The enableable capability is needed in order to support standard x2APIC and remain backward compatible. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> [Expand kvm_apic_mda comment. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14KVM: x86: add KVM_CAP_X2APIC_APIRadim Krčmář
KVM_CAP_X2APIC_API is a capability for features related to x2APIC enablement. KVM_X2APIC_API_32BIT_FORMAT feature can be enabled to extend APIC ID in get/set ioctl and MSI addresses to 32 bits. Both are needed to support x2APIC. The feature has to be enableable and disabled by default, because get/set ioctl shifted and truncated APIC ID to 8 bits by using a non-standard protocol inspired by xAPIC and the change is not backward-compatible. Changes to MSI addresses follow the format used by interrupt remapping unit. The upper address word, that used to be 0, contains upper 24 bits of the LAPIC address in its upper 24 bits. Lower 8 bits are reserved as 0. Using the upper address word is not backward-compatible either as we didn't check that userspace zeroed the word. Reserved bits are still not explicitly checked, but non-zero data will affect LAPIC addresses, which will cause a bug. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14KVM: x86: reset lapic base in kvm_lapic_resetRadim Krčmář
LAPIC is reset in xAPIC mode and the surrounding code expects that. KVM never resets after initialization. This patch is just for sanity. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14KVM: x86: reset APIC ID when enabling LAPICRadim Krčmář
APIC ID should be set to the initial APIC ID when enabling LAPIC. This only matters if the guest changes APIC ID. No sane OS does that. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14KVM: x86: use hardware-compatible format for APIC ID registerRadim Krčmář
We currently always shift APIC ID as if APIC was in xAPIC mode. x2APIC mode wants to use more bits and storing a hardware-compabible value is the the sanest option. KVM API to set the lapic expects that bottom 8 bits of APIC ID are in top 8 bits of APIC_ID register, so the register needs to be shifted in x2APIC mode. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14KVM: x86: dynamic kvm_apic_mapRadim Krčmář
x2APIC supports up to 2^32-1 LAPICs, but most guest in coming years will probably has fewer VCPUs. Dynamic size saves memory at the cost of turning one constant into a variable. apic_map mutex had to be moved before allocation to avoid races with cpu hotplug. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14KVM: x86: use physical LAPIC array for logical x2APICRadim Krčmář
Logical x2APIC IDs map injectively to physical x2APIC IDs, so we can reuse the physical array for them. This allows us to save space by sizing the logical maps according to the needs of xAPIC. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14KVM: x86: add kvm_apic_map_get_dest_lapicRadim Krčmář
kvm_irq_delivery_to_apic_fast and kvm_intr_is_single_vcpu_fast both compute the interrupt destination. Factor the code. 'struct kvm_lapic **dst = NULL' had to be added to silence GCC. GCC might complain about potential NULL access in the future, because it missed conditions that avoided uninitialized uses of dst. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-01KVM: vmx: fix missed cancellation of TSC deadline timerWanpeng Li
INFO: rcu_sched detected stalls on CPUs/tasks: 1-...: (11800 GPs behind) idle=45d/140000000000000/0 softirq=0/0 fqs=21663 (detected by 0, t=65016 jiffies, g=11500, c=11499, q=719) Task dump for CPU 1: qemu-system-x86 R running task 0 3529 3525 0x00080808 ffff8802021791a0 ffff880212895040 0000000000000001 00007f1c2c00db40 ffff8801dd20fcd3 ffffc90002b98000 ffff8801dd20fc88 ffff8801dd20fcf8 0000000000000286 ffff8801dd2ac538 ffff8801dd20fcc0 ffffffffc06949c9 Call Trace: ? kvm_write_guest_cached+0xb9/0x160 [kvm] ? __delay+0xf/0x20 ? wait_lapic_expire+0x14a/0x200 [kvm] ? kvm_arch_vcpu_ioctl_run+0xcbe/0x1b00 [kvm] ? kvm_arch_vcpu_ioctl_run+0xe34/0x1b00 [kvm] ? kvm_vcpu_ioctl+0x2d3/0x7c0 [kvm] ? __fget+0x5/0x210 ? do_vfs_ioctl+0x96/0x6a0 ? __fget_light+0x2a/0x90 ? SyS_ioctl+0x79/0x90 ? do_syscall_64+0x7c/0x1e0 ? entry_SYSCALL64_slow_path+0x25/0x25 This can be reproduced readily by running a full dynticks guest(since hrtimer in guest is heavily used) w/ lapic_timer_advance disabled. If fail to program hardware preemption timer, we will fallback to hrtimer based method, however, a previous programmed preemption timer miss to cancel in this scenario which results in one hardware preemption timer and one hrtimer emulated tsc deadline timer run simultaneously. So sometimes the target guest deadline tsc is earlier than guest tsc, which leads to the computation in vmx_set_hv_timer can underflow and cause delta_tsc to be set a huge value, then host soft lockup as above. This patch fix it by cancelling the previous programmed preemption timer if there is once we failed to program the new preemption timer and fallback to hrtimer based method. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-01KVM: x86: introduce cancel_hv_tscdeadlineWanpeng Li
Introduce cancel_hv_tscdeadline() to encapsulate preemption timer cancel stuff. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27KVM: LAPIC: cap __delay at lapic_timer_advance_nsMarcelo Tosatti
The host timer which emulates the guest LAPIC TSC deadline timer has its expiration diminished by lapic_timer_advance_ns nanoseconds. Therefore if, at wait_lapic_expire, a difference larger than lapic_timer_advance_ns is encountered, delay at most lapic_timer_advance_ns. This fixes a problem where the guest can cause the host to delay for large amounts of time. Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16KVM: x86: support using the vmx preemption timer for tsc deadline timerYunhong Jiang
The VMX preemption timer can be used to virtualize the TSC deadline timer. The VMX preemption timer is armed when the vCPU is running, and a VMExit will happen if the virtual TSC deadline timer expires. When the vCPU thread is blocked because of HLT, KVM will switch to use an hrtimer, and then go back to the VMX preemption timer when the vCPU thread is unblocked. This solution avoids the complex OS's hrtimer system, and the host timer interrupt handling cost, replacing them with a little math (for guest->host TSC and host TSC->preemption timer conversion) and a cheaper VMexit. This benefits latency for isolated pCPUs. [A word about performance... Yunhong reported a 30% reduction in average latency from cyclictest. I made a similar test with tscdeadline_latency from kvm-unit-tests, and measured - ~20 clock cycles loss (out of ~3200, so less than 1% but still statistically significant) in the worst case where the test halts just after programming the TSC deadline timer - ~800 clock cycles gain (25% reduction in latency) in the best case where the test busy waits. I removed the VMX bits from Yunhong's patch, to concentrate them in the next patch - Paolo] Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16kvm: lapic: separate start_sw_tscdeadline from start_apic_timerYunhong Jiang
The function to start the tsc deadline timer virtualization will be used also by the pre_block hook when we use the preemption timer; change it to a separate function. No logic changes. Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18KVM: x86: make hwapic_isr_update and hwapic_irr_update look the samePaolo Bonzini
Neither APICv nor AVIC actually need the first argument of hwapic_isr_update, but the vCPU makes more sense than passing the pointer to the whole virtual machine! In fact in the APICv case it's just happening that the vCPU is used implicitly, through the loaded VMCS. The second argument instead is named differently, make it consistent. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restoreSuravee Suthikulpanit
Adding kvm_x86_ops hooks to allow APICv to do post state restore. This is required to support VM save and restore feature. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_regSuravee Suthikulpanit
Rename kvm_apic_get_reg to kvm_lapic_get_reg to be consistent with the existing kvm_lapic_set_reg counterpart. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18KVM: x86: Misc LAPIC changes to expose helper functionsSuravee Suthikulpanit
Exporting LAPIC utility functions and macros for re-use in SVM code. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-05kvm: x86: make lapic hrtimer pinnedLuiz Capitulino
When a vCPU runs on a nohz_full core, the hrtimer used by the lapic emulation code can be migrated to another core. When this happens, it's possible to observe milisecond latency when delivering timer IRQs to KVM guests. The huge latency is mainly due to the fact that apic_timer_fn() expects to run during a kvm exit. It sets KVM_REQ_PENDING_TIMER and let it be handled on kvm entry. However, if the timer fires on a different core, we have to wait until the next kvm exit for the guest to see KVM_REQ_PENDING_TIMER set. This problem became visible after commit 9642d18ee. This commit changed the timer migration code to always attempt to migrate timers away from nohz_full cores. While it's discussable if this is correct/desirable (I don't think it is), it's clear that the lapic emulation code has a requirement on firing the hrtimer in the same core where it was started. This is achieved by making the hrtimer pinned. Lastly, note that KVM has code to migrate timers when a vCPU is scheduled to run in different core. However, this forced migration may fail. When this happens, we can have the same problem. If we want 100% correctness, we'll have to modify apic_timer_fn() to cause a kvm exit when it runs on a different core than the vCPU. Not sure if this is possible. Here's a reproducer for the issue being fixed: 1. Set all cores but core0 to be nohz_full cores 2. Start a guest with a single vCPU 3. Trace apic_timer_fn() and kvm_inject_apic_timer_irqs() You'll see that apic_timer_fn() will run in core0 while kvm_inject_apic_timer_irqs() runs in a different core. If you get both on core0, try running a program that takes 100% of the CPU and pin it to core0 to force the vCPU out. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "One of the largest releases for KVM... Hardly any generic changes, but lots of architecture-specific updates. ARM: - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems - PMU support for guests - 32bit world switch rewritten in C - various optimizations to the vgic save/restore code. PPC: - enabled KVM-VFIO integration ("VFIO device") - optimizations to speed up IPIs between vcpus - in-kernel handling of IOMMU hypercalls - support for dynamic DMA windows (DDW). s390: - provide the floating point registers via sync regs; - separated instruction vs. data accesses - dirty log improvements for huge guests - bugfixes and documentation improvements. x86: - Hyper-V VMBus hypercall userspace exit - alternative implementation of lowest-priority interrupts using vector hashing (for better VT-d posted interrupt support) - fixed guest debugging with nested virtualizations - improved interrupt tracking in the in-kernel IOAPIC - generic infrastructure for tracking writes to guest memory - currently its only use is to speedup the legacy shadow paging (pre-EPT) case, but in the future it will be used for virtual GPUs as well - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits) KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch KVM: x86: disable MPX if host did not enable MPX XSAVE features arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit arm64: KVM: vgic-v3: Reset LRs at boot time arm64: KVM: vgic-v3: Do not save an LR known to be empty arm64: KVM: vgic-v3: Save maintenance interrupt state only if required arm64: KVM: vgic-v3: Avoid accessing ICH registers KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit KVM: arm/arm64: vgic-v2: Reset LRs at boot time KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers KVM: s390: allocate only one DMA page per VM KVM: s390: enable STFLE interpretation only if enabled for the guest KVM: s390: wake up when the VCPU cpu timer expires KVM: s390: step the VCPU timer while in enabled wait KVM: s390: protect VCPU cpu timer with a seqcount KVM: s390: step VCPU cpu timer during kvm_run ioctl ...
2016-03-03kvm: x86: Track irq vectors in ioapic->rtc_status.dest_mapJoerg Roedel
This allows backtracking later in case the rtc irq has been moved to another vcpu/vector. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-03kvm: x86: Convert ioapic->rtc_status.dest_map to a structJoerg Roedel
Currently this is a bitmap which tracks which CPUs we expect an EOI from. Move this bitmap to a struct so that we can track additional information there. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-25KVM: Use simple waitqueue for vcpu->wqMarcelo Tosatti
The problem: On -rt, an emulated LAPIC timer instances has the following path: 1) hard interrupt 2) ksoftirqd is scheduled 3) ksoftirqd wakes up vcpu thread 4) vcpu thread is scheduled This extra context switch introduces unnecessary latency in the LAPIC path for a KVM guest. The solution: Allow waking up vcpu thread from hardirq context, thus avoiding the need for ksoftirqd to be scheduled. Normal waitqueues make use of spinlocks, which on -RT are sleepable locks. Therefore, waking up a waitqueue waiter involves locking a sleeping lock, which is not allowed from hard interrupt context. cyclictest command line: This patch reduces the average latency in my tests from 14us to 11us. Daniel writes: Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency benchmark on mainline. The test was run 1000 times on tip/sched/core 4.4.0-rc8-01134-g0905f04: ./x86-run x86/tscdeadline_latency.flat -cpu host with idle=poll. The test seems not to deliver really stable numbers though most of them are smaller. Paolo write: "Anything above ~10000 cycles means that the host went to C1 or lower---the number means more or less nothing in that case. The mean shows an improvement indeed." Before: min max mean std count 1000.000000 1000.000000 1000.000000 1000.000000 mean 5162.596000 2019270.084000 5824.491541 20681.645558 std 75.431231 622607.723969 89.575700 6492.272062 min 4466.000000 23928.000000 5537.926500 585.864966 25% 5163.000000 1613252.750000 5790.132275 16683.745433 50% 5175.000000 2281919.000000 5834.654000 23151.990026 75% 5190.000000 2382865.750000 5861.412950 24148.206168 max 5228.000000 4175158.000000 6254.827300 46481.048691 After min max mean std count 1000.000000 1000.00000 1000.000000 1000.000000 mean 5143.511000 2076886.10300 5813.312474 21207.357565 std 77.668322 610413.09583 86.541500 6331.915127 min 4427.000000 25103.00000 5529.756600 559.187707 25% 5148.000000 1691272.75000 5784.889825 17473.518244 50% 5160.000000 2308328.50000 5832.025000 23464.837068 75% 5172.000000 2393037.75000 5853.177675 24223.969976 max 5222.000000 3922458.00000 6186.720500 42520.379830 [Patch was originaly based on the swait implementation found in the -rt tree. Daniel ported it to mainline's version and gathered the benchmark numbers for tscdeadline_latency test.] Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-4-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-16KVM: x86: fix *NULL on invalid low-prio irqRadim Krčmář
Smatch noticed a NULL dereference in kvm_intr_is_single_vcpu_fast that happens if VM already warned about invalid lowest-priority interrupt. Create a function for common code while fixing it. Fixes: 6228a0da8057 ("KVM: x86: Add lowest-priority support for vt-d posted-interrupts") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09KVM: x86: consolidate different ways to test for in-kernel LAPICPaolo Bonzini
Different pieces of code checked for vcpu->arch.apic being (non-)NULL, or used kvm_vcpu_has_lapic (more optimized) or lapic_in_kernel. Replace everything with lapic_in_kernel's name and kvm_vcpu_has_lapic's implementation. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09KVM: x86: consolidate "has lapic" checks into irq.cPaolo Bonzini
Do for kvm_cpu_has_pending_timer and kvm_inject_pending_timer_irqs what the other irq.c routines have been doing. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09KVM: APIC: remove unnecessary double checks on APIC existencePaolo Bonzini
Usually the in-kernel APIC's existence is checked in the caller. Do not bother checking it again in lapic.c. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09KVM: x86: Add lowest-priority support for vt-d posted-interruptsFeng Wu
Use vector-hashing to deliver lowest-priority interrupts for VT-d posted-interrupts. This patch extends kvm_intr_is_single_vcpu() to support lowest-priority handling. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09KVM: x86: Use vector-hashing to deliver lowest-priority interruptsFeng Wu
Use vector-hashing to deliver lowest-priority interrupts, As an example, modern Intel CPUs in server platform use this method to handle lowest-priority interrupts. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25kvm/x86: Hyper-V synthetic interrupt controllerAndrey Smetanin
SynIC (synthetic interrupt controller) is a lapic extension, which is controlled via MSRs and maintains for each vCPU - 16 synthetic interrupt "lines" (SINT's); each can be configured to trigger a specific interrupt vector optionally with auto-EOI semantics - a message page in the guest memory with 16 256-byte per-SINT message slots - an event flag page in the guest memory with 16 2048-bit per-SINT event flag areas The host triggers a SINT whenever it delivers a new message to the corresponding slot or flips an event flag bit in the corresponding area. The guest informs the host that it can try delivering a message by explicitly asserting EOI in lapic or writing to End-Of-Message (EOM) MSR. The userspace (qemu) triggers interrupts and receives EOM notifications via irqfd with resampler; for that, a GSI is allocated for each configured SINT, and irq_routing api is extended to support GSI-SINT mapping. Changes v4: * added activation of SynIC by vcpu KVM_ENABLE_CAP * added per SynIC active flag * added deactivation of APICv upon SynIC activation Changes v3: * added KVM_CAP_HYPERV_SYNIC and KVM_IRQ_ROUTING_HV_SINT notes into docs Changes v2: * do not use posted interrupts for Hyper-V SynIC AutoEOI vectors * add Hyper-V SynIC vectors into EOI exit bitmap * Hyper-V SyniIC SINT msr write logic simplified Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25kvm/x86: per-vcpu apicv deactivation supportAndrey Smetanin
The decision on whether to use hardware APIC virtualization used to be taken globally, based on the availability of the feature in the CPU and the value of a module parameter. However, under certain circumstances we want to control it on per-vcpu basis. In particular, when the userspace activates HyperV synthetic interrupt controller (SynIC), APICv has to be disabled as it's incompatible with SynIC auto-EOI behavior. To achieve that, introduce 'apicv_active' flag on struct kvm_vcpu_arch, and kvm_vcpu_deactivate_apicv() function to turn APICv off. The flag is initialized based on the module parameter and CPU capability, and consulted whenever an APICv-specific action is performed. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25kvm/x86: split ioapic-handled and EOI exit bitmapsAndrey Smetanin
The function to determine if the vector is handled by ioapic used to rely on the fact that only ioapic-handled vectors were set up to cause vmexits when virtual apic was in use. We're going to break this assumption when introducing Hyper-V synthetic interrupts: they may need to cause vmexits too. To achieve that, introduce a new bitmap dedicated specifically for ioapic-handled vectors, and populate EOI exit bitmap from it for now. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10KVM: x86: Move TSC scaling logic out of call-back read_l1_tsc()Haozhong Zhang
Both VMX and SVM scales the host TSC in the same way in call-back read_l1_tsc(), so this patch moves the scaling logic from call-back read_l1_tsc() to a common function kvm_read_l1_tsc(). Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: zero apic_arb_prio on resetRadim Krčmář
BSP doesn't get INIT so its apic_arb_prio isn't zeroed after reboot. BSP won't get lowest priority interrupts until other VCPUs get enough interrupts to match their pre-reboot apic_arb_prio. That behavior doesn't fit into KVM's round-robin-like interpretation of lowest priority delivery ... userspace should KVM_SET_LAPIC on reset, so just zero apic_arb_prio there. Reported-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14kvm: x86: set KVM_REQ_EVENT when updating IRRRadim Krčmář
After moving PIR to IRR, the interrupt needs to be delivered manually. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Define a new interface kvm_intr_is_single_vcpu()Feng Wu
This patch defines a new interface kvm_intr_is_single_vcpu(), which can returns whether the interrupt is for single-CPU or not. It is used by VT-d PI, since now we only support single-CPU interrupts, For lowest-priority interrupts, if user configures it via /proc/irq or uses irqbalance to make it single-CPU, we can use PI to deliver the interrupts to it. Full functionality of lowest-priority support will be added later. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Add EOI exit bitmap inferenceSteve Rutherford
In order to support a userspace IOAPIC interacting with an in kernel APIC, the EOI exit bitmaps need to be configurable. If the IOAPIC is in userspace (i.e. the irqchip has been split), the EOI exit bitmaps will be set whenever the GSI Routes are configured. In particular, for the low MSI routes are reservable for userspace IOAPICs. For these MSI routes, the EOI Exit bit corresponding to the destination vector of the route will be set for the destination VCPU. The intention is for the userspace IOAPICs to use the reservable MSI routes to inject interrupts into the guest. This is a slight abuse of the notion of an MSI Route, given that MSIs classically bypass the IOAPIC. It might be worthwhile to add an additional route type to improve clarity. Compile tested for Intel x86. Signed-off-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Add KVM exit for IOAPIC EOIsSteve Rutherford
Adds KVM_EXIT_IOAPIC_EOI which allows the kernel to EOI level-triggered IOAPIC interrupts. Uses a per VCPU exit bitmap to decide whether or not the IOAPIC needs to be informed (which is identical to the EOI_EXIT_BITMAP field used by modern x86 processors, but can also be used to elide kvm IOAPIC EOI exits on older processors). [Note: A prototype using ResampleFDs found that decoupling the EOI from the VCPU's thread made it possible for the VCPU to not see a recent EOI after reentering the guest. This does not match real hardware.] Compile tested for Intel x86. Signed-off-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Split the APIC from the rest of IRQCHIP.Steve Rutherford
First patch in a series which enables the relocation of the PIC/IOAPIC to userspace. Adds capability KVM_CAP_SPLIT_IRQCHIP; KVM_CAP_SPLIT_IRQCHIP enables the construction of LAPICs without the rest of the irqchip. Compile tested for x86. Signed-off-by: Steve Rutherford <srutherford@google.com> Suggested-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: introduce lapic_in_kernelPaolo Bonzini
Avoid pointer chasing and memory barriers, and simplify the code when split irqchip (LAPIC in kernel, IOAPIC/PIC in userspace) is introduced. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: replace vm_has_apicv hook with cpu_uses_apicvPaolo Bonzini
This will avoid an unnecessary trip to ->kvm and from there to the VPIC. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: store IOAPIC-handled vectors in each VCPUPaolo Bonzini
We can reuse the algorithm that computes the EOI exit bitmap to figure out which vectors are handled by the IOAPIC. The only difference between the two is for edge-triggered interrupts other than IRQ8 that have no notifiers active; however, the IOAPIC does not have to do anything special for these interrupts anyway. This again limits the interactions between the IOAPIC and the LAPIC, making it easier to move the former to userspace. Inspired by a patch from Steve Rutherford. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 22:14:29 +0000