summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-07-28Merge tag 'pinctrl-for-v3.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Driver fixes for AM33xx, SIRF and PFC pin controllers - Fix a compile warning from the pinctrl single-register driver - Fix a little nasty memory leak * tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix a memleak when freeing maps pinctrl: pinctrl-single: fix compile warning when no CONFIG_PM pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DT arm/dts: sirf: fix the pingroup name mismatch between drivers and dts pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl pinctrl: sirf: fix the pin number and mux bit for usp0 pinctrl: am33xx dt binding: correct include path
2013-07-26Merge tag 'arm64-stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Stack size increased to 16K (similar to other 64-bit architectures) - Additional cache flushing for secondary CPUs boot mode * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Change kernel stack size to 16K arm64: Fix definition of arm_pm_restart to match the declaration arm64: virt: ensure visibility of __boot_cpu_mode
2013-07-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a largeish batch of fixes, mostly because I missed -rc2 due to travel/vacation. So in number these are a bit more than ideal unless you amortize them over two -rcs. Quick breakdown: - Defconfig updates - Making multi_v7_defconfig useful on more hardware to encourage single-image usage - Davinci and nomadik updates due to new code merged this merge window - Fixes for UART on Samsung platforms, both PM and clock-related - A handful of warning fixes from defconfig builds, including for max8925 backlight and pxamci (both with appropriate acks) - Exynos5440 fixes for LPAE configuration, PM - ...plus a bunch of other smaller changes all over the place I expect to switch to regressions-or-severe-bugs-only fixes from here on out" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) mfd: max8925: fix dt code for backlight ARM: omap5: Only select errata 798181 if SMP ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos ARM: EXYNOS: Fix low level debug support ARM: SAMSUNG: Save/restore only selected uart's registers ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART ARM: multi_v7_defconfig: Select USB chipidea driver ARM: pxa: propagate errors from regulator_enable() to pxamci ARM: zynq: fix compilation warning ARM: keystone: fix compilation warning ARM: highbank: Only touch common coherency control register fields ARM: footbridge: fix overlapping PCI mappings dmaengine: shdma: fix a build failure on platforms with no DMA support ARM: STi: Set correct ARM ERRATAs. ARM: dts: STi: Fix pinconf setup for STiH416 serial2 ARM: nomadik: configure for NO_HZ and HRTIMERS ARM: nomadik: update defconfig base ARM: nomadik: Update MMC defconfigs ARM: davinci: defconfig: enable EDMA driver ...
2013-07-26arm64: Change kernel stack size to 16KFeng Kan
Written by Catalin Marinas, tested by APM on storm platform. This is needed because of the failures encountered when running SpecWeb benchmark test. Signed-off-by: Feng Kan <fkan@apm.com> Acked-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-24Merge tag 'samsung-fixes-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Samsung fixes for v3.11 - fix kernel booting on exynos5440 skip pm which is not supported update regarding LPAE features - fix s3c2440 uart with adding clkdev entries - fix compilatioin for Samsung SoCs with selecting pm - update ARCH_NR_GPIO to support exynos4412 has more gpios * tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos ARM: EXYNOS: Fix low level debug support ARM: SAMSUNG: Save/restore only selected uart's registers ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART ARM: EXYNOS: Enable 64-bit DMA for EXYNOS5440 if LPAE is enabled ARM: EXYNOS: change the PHYSMEM_BITS and SECTION_SIZE ARM: EXYNOS: skip pm support on exynos5440 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-24ARM: omap5: Only select errata 798181 if SMPOlof Johansson
Avoids the following warning when SMP is off: warning: (ARCH_KEYSTONE && SOC_OMAP5) selects ARM_ERRATA_798181 which has unmet direct dependencies (CPU_V7 && SMP) Reported-by: Emilio López <emilio@elopez.com.ar> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-24Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here is a series of powerpc fixes. It's a bit big, mostly because of the series of 11 "EEH" patches from Gavin. The EEH (Our IBM specific PCI/PCIe Enhanced Error Handling) code had been rotting for a while and this merge window saw a significant rework & fixing of it by Gavin Shan. However, that wasn't complete and left some open issues. There were still a few corner cases that didn't work properly, for example in relation to hotplug and devices without explicit error handlers. We had some patches but they weren't quite good enough yet so I left them off the 3.11 merge window. Gavin since then fixed it all up, we ran quite a few rounds of testing and it seems fairly solid (at least probably more than it has ever been). This should probably have made -rc1 but both Gavin and I took some vacation so it had to wait for -rc2. The rest is more bug fixes, mostly to new features recently added, for example, we missed the cpu table entry for one of the two models of P8 (we didn't realize they had different PVR [Processor Version Register] values), some module CRC issues, etc..." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (23 commits) powerpc/perf: BHRB filter configuration should follow the task powerpc/perf: Ignore separate BHRB privilege state filter request powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instruction powerpc/mm: Fix fallthrough bug in hpte_decode powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert() powerpc/eeh: Introdce flag to protect sysfs powerpc/eeh: Fix unbalanced enable for IRQ powerpc/eeh: Don't use pci_dev during BAR restore powerpc/eeh: Use partial hotplug for EEH unaware drivers powerpc/pci: Partial tree hotplug support powerpc/eeh: Use safe list traversal when walking EEH devices powerpc/eeh: Keep PE during hotplug powerpc/pci/hotplug: Don't need to remove from EEH cache twice powerpc/pci: Override pcibios_release_device() powerpc/eeh: Export functions for hotplug powerpc/eeh: Remove reference to PCI device powerpc: Fix the corrupt r3 error during MCE handling. powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMU powerpc/pseries: Drop "select HOTPLUG" ...
2013-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This push fixes a memory corruption issue in caam, as well as reverting the new optimised crct10dif implementation as it breaks boot on initrd systems. Hopefully crct10dif will be reinstated once the supporting code is added so that it doesn't break boot" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" crypto: caam - Fixed the memory out of bound overwrite issue
2013-07-24ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for ExynosSachin Kamat
With the recent cleanup in Exynos platform code notably commits 17859bec ("ARM: EXYNOS: Do not select legacy Kconfig symbols any more") and b9222210 ("ARM: EXYNOS: Remove mach/gpio.h"), the definition of ARCH_NR_GPIOS got removed. This started causing problems on SoCs like Exynos4412 which have more than the default number of GPIOs. Thus define this number in KConfig file which takes care of current SoC requirements and provides scope for GPIO expanders. Without this patch we get the following errors during boot: gpiochip_add: gpios 251..258 (gpv0) failed to register samsung-pinctrl 106e0000.pinctrl: failed to register gpio_chip gpv0, error code: -22 samsung-pinctrl: probe of 106e0000.pinctrl failed with error -22 Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24ARM: EXYNOS: Fix low level debug supportYadwinder Singh Brar
Presently, using exynos_defconfig with CONFIG_DEBUG_LL and CONFIG_EARLY_PRIN on, kernel is not booting, we are getting following: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at mm/vmalloc.c:1134! [ 0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc1 #633 [ 0.000000] task: c052ec48 ti: c0524000 task.ti: c0524000 [ 0.000000] PC is at vm_area_add_early+0x54/0x94 [ 0.000000] LR is at add_static_vm_early+0xc/0x60 Its because exynos[4/5]_map_io() function ioremaps a single 512KB memory size for all the four uart ports which envelopes the mapping created by debug_ll_io_init(), called earlier in exynos_init_io(). This patch removes iodesc entries for UART controller for all Samsung SoC's, since now the Samsung uart driver does a ioremap during probe and any needed iomapping for earlyprintk will be handled by debug_ll_io_init(). Tested on smdk4412 and smdk5250. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24ARM: SAMSUNG: Save/restore only selected uart's registersYadwinder Singh Brar
Basically this code gets executed only during debugging i.e when DEBUG_LL & SAMSUNG_PM_DEBUG is on, so required only for UART used for debugging. Since we are removing static iodesc entries for UARTs, so now only the selected (CONFIG_DEBUG_S3C_UART) UART will be ioremapped by the debug_ll_io_init() for DEBUG_LL, so save/restore uart registers only for selected uart. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto ↵Herbert Xu
transform framework" This reverts commits 67822649d7305caf3dd50ed46c27b99c94eff996 39761214eefc6b070f29402aa1165f24d789b3f7 0b95a7f85718adcbba36407ef88bba0a7379ed03 31d939625a9a20b1badd2d4e6bf6fd39fa523405 2d31e518a42828df7877bca23a958627d60408bc Unfortunately this change broke boot on some systems that used an initrd which does not include the newly created crct10dif modules. As these modules are required by sd_mod under certain configurations this is a serious problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-07-24ARM: SAMSUNG: Add SAMSUNG_PM config option to select pmAmit Daniel Kachhap
This patch enables the selection of samsung pm related stuffs when SAMSUNG_PM config is enabled and not just when generic PM config is enabled. Power management for s3c64XX and s3c24XX is enabled by default and for other platform depends on S5P_PM. This patch also fixes the following compilation error's when compiling a platform like exynos5440 which does not select pm stuffs. arch/arm/mach-exynos/built-in.o: In function '__virt_to_phys': linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' arch/arm/mach-exynos/built-in.o: In function 'exynos5_init_irq': linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' arch/arm/mach-exynos/built-in.o: In function 'exynos4_init_irq': linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' arch/arm/plat-samsung/built-in.o: In function 's3c_irqext_wake': linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' arch/arm/plat-samsung/built-in.o: In function 's3c_pm_enter': linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:275: undefined reference to 's3c_pm_save_core' linux/arch/arm/plat-samsung/pm.c:279: undefined reference to 's3c_pm_configure_extint' linux/arch/arm/plat-samsung/pm.c:310: undefined reference to 's3c_pm_restore_core' make: *** [vmlinux] Error 1 Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24powerpc/perf: BHRB filter configuration should follow the taskAnshuman Khandual
When the task moves around the system, the corresponding cpuhw per cpu strcuture should be popullated with the BHRB filter request value so that PMU could be configured appropriately with that during the next call into power_pmu_enable(). Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/perf: Ignore separate BHRB privilege state filter requestAnshuman Khandual
Completely ignore BHRB privilege state filter request as we are already configuring that with privilege state filtering attribute for the accompanying PMU event. This would help achieve cleaner user space interaction for BHRB. This patch fixes a situation like this Before patch:- ------------ ./perf record -j any -e branch-misses:k ls Error: The sys_perf_event_open() syscall returned with 95 (Operation not supported) for event (branch-misses:k). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? Here 'perf record' actually copies over ':k' filter request into BHRB privilege state filter config and our previous check in kernel would fail that. After patch:- ------------- ./perf record -j any -e branch-misses:k ls perf perf.data perf.data.old test-mmap-ring [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (~102 samples)] Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __initBjorn Helgaas
Mark pnv_pci_init_ioda2_phb() as __init. It is called only from an init function (pnv_pci_init()), and it calls an init function (pnv_pci_init_ioda_phb()): pnv_pci_init # init pnv_pci_init_ioda2_phb # non-init pnv_pci_init_ioda_phb # init This should fix a section mismatch warning. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instructionAneesh Kumar K.V
The sllp value is stored in mmu_psize_defs in such a way that we can easily OR the value to get the operand for slbmte instruction. ie, the L and LP bits are not contiguous. Decode the bits and use them correctly in tlbie. regression is introduced by 1f6aaaccb1b3af8613fe45781c1aefee2ae8c6b3 "powerpc: Update tlbie/tlbiel as per ISA doc" Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/mm: Fix fallthrough bug in hpte_decodeAneesh Kumar K.V
We should not fallthrough different case statements in hpte_decode. Add break statement to break out of the switch. The regression is introduced by dcda287a9b26309ae43a091d0ecde16f8f61b4c0 "powerpc/mm: Simplify hpte_decode" Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert()Denis Kirjanov
Commit 801eb73f45371accc78ca9d6d22d647eeb722c11 introduced a bug while checking PTE flags. We have to drop the _PAGE_COHERENT flag when __PAGE_NO_CACHE is set and the cache update policy is not write-through (i.e. _PAGE_WRITETHRU is not set) Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> CC: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24ARM: S3C24XX: Add missing clkdev entries for s3c2440 UARTSylwester Nawrocki
This patch restores serial port operation which has been broken since commit 60e93575476f ("serial: samsung: enable clock before clearing pending interrupts during init") That commit only uncovered the real issue which was missing clkdev entries for the "uart" clocks on S3C2440. It went unnoticed so far because return value of clk API calls were not being checked at all in the samsung serial port driver. This patch should be backported to at least 3.10 stable kernel, since the serial port has not been working on s3c2440 since 3.10-rc5. Cc: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> [on S3C2440 SoC based Mini2440 board] Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Tested-by: Juergen Beisert <jbe@pengutronix.de> Cc: <stable@vger.kernel.org> [3.10] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-24powerpc/eeh: Introdce flag to protect sysfsGavin Shan
The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs entries for the corresponding EEH device (then PCI device) has been added or removed, in order to avoid race condition. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Fix unbalanced enable for IRQGavin Shan
The patch fixes following issue: Unbalanced enable for IRQ 23 ------------[ cut here ]------------ WARNING: at kernel/irq/manage.c:437 : NIP [c00000000016de8c] .__enable_irq+0x11c/0x140 LR [c00000000016de88] .__enable_irq+0x118/0x140 Call Trace: [c000003ea1f23880] [c00000000016de88] .__enable_irq+0x118/0x140 (unreliable) [c000003ea1f23910] [c00000000016df08] .enable_irq+0x58/0xa0 [c000003ea1f239a0] [c0000000000388b4] .eeh_enable_irq+0xc4/0xe0 [c000003ea1f23a30] [c000000000038a28] .eeh_report_reset+0x78/0x130 [c000003ea1f23ac0] [c000000000037508] .eeh_pe_dev_traverse+0x98/0x170 [c000003ea1f23b60] [c0000000000391ac] .eeh_handle_normal_event+0x2fc/0x3d0 [c000003ea1f23bf0] [c000000000039538] .eeh_handle_event+0x2b8/0x2c0 [c000003ea1f23c90] [c000000000039600] .eeh_event_handler+0xc0/0x170 [c000003ea1f23d30] [c0000000000da9a0] .kthread+0xf0/0x100 [c000003ea1f23e30] [c00000000000a1dc] .ret_from_kernel_thread+0x5c/0x80 Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Don't use pci_dev during BAR restoreGavin Shan
While restoring BARs for one specific PCI device, the pci_dev instance should have been released. So it's not reliable to use the pci_dev instance on restoring BARs. However, we still need some information (e.g. PCIe capability position, header type) from the pci_dev instance. So we have to store those information to EEH device in advance. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Use partial hotplug for EEH unaware driversGavin Shan
When EEH error happens to one specific PE, some devices with drivers supporting EEH won't except hotplug on the device. However, there might have other deivces without driver, or with driver without EEH support. For the case, we need do partial hotplug in order to make sure that the PE becomes absolutely quite during reset. Otherise, the PE reset might fail and leads to failure of error recovery. The current code doesn't handle that 'mixed' case properly, it either uses the error callbacks to the drivers, or tries hotplug, but doesn't handle a PE (EEH domain) composed of a combination of the two. The patch intends to support so-called "partial" hotplug for EEH: Before we do reset, we stop and remove those PCI devices without EEH sensitive driver. The corresponding EEH devices are not detached from its PE, but with special flag. After the reset is done, those EEH devices with the special flag will be scanned one by one. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/pci: Partial tree hotplug supportGavin Shan
When EEH error happens to one specific PE, the device drivers of its attached EEH devices (PCI devices) are checked to see the further action: reset with complete hotplug, or reset without hotplug. However, that's not enough for those PCI devices whose drivers can't support EEH, or those PCI devices without driver. So we need do so-called "partial hotplug" on basis of PCI devices. In the situation, part of PCI devices of the specific PE are unplugged and plugged again after PE reset. The patch changes pcibios_add_pci_devices() so that it can support full hotplug and so-called "partial" hotplug based on device-tree or real hardware. It's notable that pci_of_scan.c has been changed for a bit in order to support the "partial" hotplug based on dev-tree. Most of the generic code already supports that, we just need to plumb it properly on our side. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Use safe list traversal when walking EEH devicesGavin Shan
Currently, we're trasversing the EEH devices list using list_for_each_entry(). That's not safe enough because the EEH devices might be removed from its parent PE while doing iteration. The patch replaces that with list_for_each_entry_safe(). Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Keep PE during hotplugGavin Shan
When we do normal hotplug, the PE (shadow EEH structure) shouldn't be kept around. However, we need to keep it if the hotplug an artifial one caused by EEH errors recovery. Since we remove EEH device through the PCI hook pcibios_release_device(), the flag "purge_pe" passed to various functions is meaningless. So the patch removes the meaningless flag and introduce new flag "EEH_PE_KEEP" to save the PE while doing hotplug during EEH error recovery. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/pci: Override pcibios_release_device()Gavin Shan
The patch overrides pcibios_release_device() to release EEH resources (EEH cache, unbinding EEH device) for the indicated PCI device. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Export functions for hotplugGavin Shan
Make some functions public in order to support hotplug on either specific PCI bus or PCI device in future. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Remove reference to PCI deviceGavin Shan
We will rely on pcibios_release_device() to remove the EEH cache and unbind EEH device for the specific PCI device. So we shouldn't hold the reference to the PCI device from EEH cache and EEH device. Otherwise, pcibios_release_device() won't be called as we expected. The patch removes the reference to the PCI device in EEH core. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc: Fix the corrupt r3 error during MCE handling.Mahesh Salgaonkar
During Machine Check interrupt on pseries platform, R3 generally points to memory region inside RTAS (FWNMI) area. We see r3 corruption because when RTAS delivers the machine check exception it passes the address inside FWNMI area with the top most bit set. This patch fixes this issue by masking top two bit in machine check exception handler. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMUMichael Ellerman
The presence or absence of EBB is advertised to userspace via the presence or absence of PPC_FEATURE2_EBB in cpu_user_features2. Because the kernel can be built without PMU support, we should only add PPC_FEATURE2_EBB to cpu_user_features2 when we successfully register the power8 PMU support. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/pseries: Drop "select HOTPLUG"Paul Bolle
The Kconfig symbol HOTPLUG was removed with commit 40b313608a ("Finally eradicate CONFIG_HOTPLUG"). But there's still one select statement for that symbol. It seems that select statement was added after the patch to remove CONFIG_HOTPLUG was submitted. Anyhow, it is useless and can be dropped. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc: Access local paca after hard irq disabledTiejun Chen
In hard_irq_disable(), we accessed the PACA before we hard disabled the interrupts, potentially causing a warning as get_paca() will us debug_smp_processor_id(). Move that to after the disabling, and also use local_paca directly rather than get_paca() to avoid several redundant and useless checks. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/modules: Module CRC relocation fix causes perf issuesAnton Blanchard
Module CRCs are implemented as absolute symbols that get resolved by a linker script. We build an intermediate .o that contains an unresolved symbol for each CRC. genksysms parses this .o, calculates the CRCs and writes a linker script that "resolves" the symbols to the calculated CRC. Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols that need relocating and relocates them at boot. Commit d4703aef (module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y) added a hook to reverse the bogus relocations. Part of this patch created a symbol at 0x0: # head -2 /proc/kallsyms 0000000000000000 T reloc_start c000000000000000 T .__start This reloc_start symbol is causing lots of confusion to perf. It thinks reloc_start is a massive function that stretches from 0x0 to 0xc000000000000000 and we get various cryptic errors out of perf, including: problem incrementing symbol count, skipping event This patch removes the reloc_start linker script label and instead defines it as PHYSICAL_START. We also need to wrap it with CONFIG_PPC64 because the ppc32 kernel can set a non zero PHYSICAL_START at compile time and we wouldn't want to subtract it from the CRCs in that case. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc: Add second POWER8 PVR entryMichael Neuling
POWER8 comes with two different PVRs. This patch enables the additional PVR in the cputable. The existing entry (PVR=0x4b) is renamed to POWER8E and the new entry (PVR=0x4d) is given POWER8. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha architecture fixes from Matt Turner: "This contains mostly clean ups and fixes but also an implementation of atomic64_dec_if_positive() and a pair of new syscalls" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: Use handle_percpu_irq for the timer interrupt alpha: Force the user-visible HZ to a constant 1024. alpha: Don't if-out dp264_device_interrupt. alpha: Use __builtin_alpha_rpcc alpha: Fix type compatibility warning for marvel_map_irq alpha: Generate dwarf2 unwind info for various kernel entry points. alpha: Implement atomic64_dec_if_positive alpha: Improve atomic_add_unless alpha: Modernize lib/mpi/longlong.h alpha: Add kcmp and finit_module syscalls alpha: locks: remove unused arch_*_relax operations alpha: kernel: typo issue, using '1' instead of '11' alpha: kernel: using memcpy() instead of strcpy() alpha: Convert print_symbol to %pSR
2013-07-23ARM: multi_v7_defconfig: Select USB chipidea driverFabio Estevam
CONFIG_USB_EHCI_MXC selects the old i.mx USB driver, which does not support device tree. Select the USB chipidea driver instead, so that USB can be functional on i.mx. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23ARM: pxa: propagate errors from regulator_enable() to pxamciArnd Bergmann
The em_x270_mci_setpower() and em_x270_usb_hub_init() functions call regulator_enable(), which may return an error that must be checked. This changes the em_x270_usb_hub_init() function to bail out if it fails, and changes the pxamci_platform_data->setpower callback so that the a failed em_x270_mci_setpower call can be propagated by the pxamci driver into the mmc core. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Chris Ball <cjb@laptop.org> [olof: fixed order of regulator_enable() and test in em_x270_usb_hub_init] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23ARM: zynq: fix compilation warningVincent Stehlé
Fix the following compilation warning: arch/arm/mach-zynq/common.c:110:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-zynq/common.c:110:2: warning: (near initialization for ‘__mach_desc_XILINX_EP107.restart’) [enabled by default] Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Robin Holt <holt@sgi.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: trivial@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23ARM: keystone: fix compilation warningVincent Stehlé
Fix the following compilation warning: arch/arm/mach-keystone/keystone.c:74:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-keystone/keystone.c:74:2: warning: (near initialization for ‘__mach_desc_KEYSTONE.restart’) [enabled by default] Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: trivial@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23arm64: Fix definition of arm_pm_restart to match the declarationCatalin Marinas
Commit ff70130 (arm64: use common reboot infrastructure) converted the arm_pm_restart declaration to the new reboot infrastructure but missed the actual definition. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-23arm64: virt: ensure visibility of __boot_cpu_modeMark Rutland
Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a cached value of __boot_cpu_mode may be incoherent with that in memory. This could lead to a failure to detect mismatched boot modes. This patch adds flushing to ensure that writes by secondaries to __boot_cpu_mode are made visible before we test against it. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-22ARM: highbank: Only touch common coherency control register fieldsRob Herring
Midway adds new register fields to the coherency control registers, so writing absolute values will break on Midway. Change the register accesses to only modify the necessary and common fields in order to support both Midway and Highbank. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22Merge tag 'nomadik-defconfig-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into fixes From Linus Walleij: This updates the Nomadik defconfig post-v3.11-rc1: - Update the baseline so we need not rely on make oldconfig so much - MMC defconfig updates - Activate NO_HZ_IDLE and HRTIMERS * tag 'nomadik-defconfig-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: configure for NO_HZ and HRTIMERS ARM: nomadik: update defconfig base ARM: nomadik: Update MMC defconfigs Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22ARM: footbridge: fix overlapping PCI mappingsMike Frysinger
Commit 8ef6e6201b26cb9fde79c1baa08145af6aca2815 (ARM: footbridge: use fixed PCI i/o mapping) broke booting on my netwinder. Before that, everything boots fine. Since then, it crashes on boot. With earlyprintk, I see it BUG-ing like so: kernel BUG at lib/ioremap.c:27! Internal error: Oops - BUG: 0 [#1] ARM ... [<c0139b54>] (ioremap_page_range+0x128/0x154) from [<c02e6a6c>] (dc21285_setup+0xd0/0x114) [<c02e6a6c>] (dc21285_setup+0xd0/0x114) from [<c02e4874>] (pci_common_init+0xa0/0x298) [<c02e4874>] (pci_common_init+0xa0/0x298) from [<c02e793c>] (netwinder_pci_init+0xc/0x18) [<c02e793c>] (netwinder_pci_init+0xc/0x18) from [<c02e27d0>] (do_one_initcall+0xb4/0x180) ... Russell points out it's because of overlapping PCI mappings that was added with the aforementioned commit. Rob thought the code would re-use the static mapping, but that turns out to not be the case and instead hits the BUG further down. After deleting this hunk as suggested by Russel, the system boots up fine again and all my PCI devices work (IDE, ethernet, the DC21285). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: stable@vger.kernel.org # v3.5+ Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22Merge tag 'imx-fixes-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo, imx fixes for 3.11: - A few device tree source fixes regarding pinctrl, clock, and pwm backlight. - Fixes imx28 and imx51 audio driver failure caused by sgtl5000 codec driver change by supplying the correct clock for codec. - imx6q emi_sel clock muxing and imx6q-iomuxc-gpr macro fixes * tag 'imx-fixes-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx51-babbage: Pass a real clock to the codec ARM i.MX53: mba53: Fix PWM backlight DT node ARM: imx: fix vf610 enet module clock selection ARM: mxs: saif0 is the clock provider to sgtl5000 ARM: i.MX6Q: correct emi_sel clock muxing ARM i.MX6Q: Fix IOMUXC GPR1 defines for ENET_CLK_SEL and IPU1/2_MUX ARM: i.MX27: Typo fix ARM: imx27: Fix documentation for SPLL clock ARM i.MX53: Fix UART pad configuration
2013-07-22Merge tag 'omap-for-v3.11/fixes-against-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Omap fixes mostly to deal with the dropping of platform data for omap4, and to make v7_defconfig bootable on omap4 SDP with nfsroot. * tag 'omap-for-v3.11/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Provide alias to USB PHY clock ARM: dts: Add missing vmmc2 regulator for twl ARM: multi_v7: Enabled omap4430 sdp nfsroot
2013-07-22Merge tag 'davinci-fixes-for-v3.11-rc2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes From Sekhar Nori: DaVinci fixes for v3.11-rc2 The pull request includes fixes for sparse warnings, defconfig changes to enable DMA usage on peripherals and removal of a duplicated include file. * tag 'davinci-fixes-for-v3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: defconfig: enable EDMA driver ARM: davinci: make file local variables static ARM: edma: remove duplicated include from edma.c Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22ARM: STi: Set correct ARM ERRATAs.Srinivas Kandagatla
Some of the ARM_ERRATA selection is not done in the initial SOC support patches. This patch selects 2 new ARM_ERRATA's and removes one which was actually fixed. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> [olof: reorder new errata entries] Signed-off-by: Olof Johansson <olof@lixom.net>