summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2010-12-02ENGR00134154-2 MSL: add sync between usb resume and usb wakeup thread for MX5xPeter Chen
2010-12-02ENGR00134154-1 MSL: add sync between usb resume and usb wakeup thread for mx28Peter Chen
2010-12-01ENGR00133828-2: MX50 EVK: Fix FEC GPIO/IOMUX settings in suspend mode.Ranjani Vaidyanathan
2010-12-01ENGR00133828-1: MX50 EVK: Shutting down VUSB2 in suspend causes USB failuresRanjani Vaidyanathan
2010-12-01ENGR00134202-1 DMA : add a macro to fill the DMA command word1Huang Shijie
2010-12-01ENGR00134179 mx50 rdp: set VSD regulator always onAisheng.Dong
2010-12-01ENGR00133542: MX50- Enable SRPG support for TO1.1 chipsZhou Jingyu
2010-11-30ENGR00134077-1 Add TVE 1080P30/25/24, 1080I60/50 support for iMX53Ran Ferderber
2010-11-30ENGR00134043-2 PM:enable device suspend time mx3/5Zhang Jiejing
2010-11-29ENGR00134116 MX5 MFG: disable battery driverLily Zhang
2010-11-29ENGR00132603-1 mxc_iim: Add mach support for sense and fuse function in mxc_iimTerry Lv
2010-11-25ENGR00134056-1 MSL: mx28 add low power mode and wakeup support for otg portPeter Chen
2010-11-24ENGR00133954-1 MSL: remove FB_SYNC_EXT flagJason Chen
2010-11-24ENGR00133970 MX5x: Z160 GPU revision checkJie Zhou
2010-11-24ENGR00133918 mx50: ZQ calibration should be run only on mx50 platformTerry Lv
2010-11-23ENGR00133955 MX50: dma apbh incorrect ioremap sizeXinyu Chen
2010-11-23ENGR00133909-1 MX28: add VBUS 5v regulatorZhou Jingyu
2010-11-22ENGR00133240 MX50 TO1 mDDR at 24 MHz in LPAPM modeAnish Trivedi
2010-11-22ENGR00133906-1 DMA : add dumping code for DMAHuang Shijie
2010-11-22ENGR00133848 imx51 MSL uart: change uart default parent to pll2Jason Chen
2010-11-22ENGR00133905 MX53 ARD: increase VDDGP and VCC voltages in suspend modeLily Zhang
2010-11-22ENGR00133862: Mx50: Drop Vcc voltage to 1.05V in LPAPM modeRanjani Vaidyanathan
2010-11-22ENGR00132712-2 Add ZQ calib in defconfigRobby Cai
2010-11-22ENGR00132712-1: Add ZQ calibration supportRobby Cai
2010-11-22ENGR00133850 MX53 TO2: enable ARM SRPGLily Zhang
2010-11-22ENGR00133795-2 MX53 ARD:Support ADV7180 TVinLiu Ying
2010-11-22ENGR00122167-3 MSL: add VGA support and fix TVE clock issue.Jason Chen
2010-11-22ENGR00133737 MXC SDMA: fix system hangs when play audio with irq threadedZeng Zhaoming
2010-11-22ENGR00133318-3 MX53 EVK:Set TVin pwr gpio to be output in io_initLiu Ying
2010-11-22ENGR00133702-3 usb host1: Add usb host1 low power and wakeup support for mx28Peter Chen
2010-11-22ENGR00133702-1 usb host1: Add usb host1 low power and wakeup support for mx28Peter Chen
2010-11-12ENGR00133669: MXC: Ensure some clock APIs can be called in process context only.Ranjani Vaidyanathan
2010-11-10ENGR00133580 PMIC: Configure battery driver as a moduleNancy Chen
2010-11-09ENGR00133511 MX28: Fixed 1588 clock divider setting errorXie Xiaobo
2010-11-09ENGR00133377 mx28: fix system suspend twice issueZhou Jingyu
2010-11-08ENGR00132537-3 - MSL: Add 6.0" V220 panel, update other E-Ink panelsDanny Nold
2010-11-08ENGR00133485 mx28: low speed device doesn't be supported at otg portPeter Chen
2010-11-08ENGR00133478-1 IMX USB:move clk_enable from irq context to thread contextHu hui
2010-11-05ENGR00133178-2 DMA : remove mutex for each channelHuang Shijie
2010-11-05ENGR00133178-1 NAND : add set_parent()/set_rate() for GPMIHuang Shijie
2010-11-05ENGR00133440 mx23/mx28: add CONFIG_I2C_CHARDEV in defconfigAisheng.Dong
2010-11-04ENGR00133429 MX51 DVFS_PER: Set LP voltage to 1.25 VNancy Chen
2010-11-04ENGR00127010-2 mxs: change i2c device addressAisheng.Dong
2010-11-03ENGR00133268 MX28: DVFS support mDDRFrank Li
2010-11-02ENGR00133261 MX53 EVK:Correct PWM backlight frequencyLiu Ying
2010-11-01ENGR00133183 MX50 EVK: Support PWM LCD backlightLiu Ying
2010-10-28ENGR00133150: Fix early_param setting for 2.6.35 kernelDinh Nguyen
2010-10-28ENGR00133149 MX50: external speaker amp shutdownAlan Tull
2010-10-27ENGR00132538 MX53: Get the CAN clk via dev_id and con_idWilliam Lai
2010-10-26ENGR00132935-3 MXC PWM:Use gpio when inverted pwm keeps lowLiu Ying