summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2016-08-16x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspaceDavid Howells
commit f7d665627e103e82d34306c7d3f6f46f387c0d8b upstream. x86_64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl(). The latter will work in a lot of cases, thereby hiding the issue. Reported-by: Stephan Mueller <smueller@chronox.de> Tested-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keyrings@vger.kernel.org Cc: linux-security-module@vger.kernel.org Link: http://lkml.kernel.org/r/146961615805.14395.5581949237156769439.stgit@warthog.procyon.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386Toshi Kani
commit 1886297ce0c8d563a08c8a8c4c0b97743e06cd37 upstream. The following BUG_ON() crash was reported on QEMU/i386: kernel BUG at arch/x86/mm/physaddr.c:79! Call Trace: phys_mem_access_prot_allowed mmap_mem ? mmap_region mmap_region do_mmap vm_mmap_pgoff SyS_mmap_pgoff do_int80_syscall_32 entry_INT80_32 after commit: edfe63ec97ed ("x86/mtrr: Fix Xorg crashes in Qemu sessions") PAT is now set to disabled state when MTRRs are disabled. Thus, reactivating the __pa(high_memory) check in phys_mem_access_prot_allowed(). When CONFIG_DEBUG_VIRTUAL is set, __pa() calls __phys_addr(), which in turn calls slow_virt_to_phys() for 'high_memory'. Because 'high_memory' is set to (the max direct mapped virt addr + 1), it is not a valid virtual address. Hence, slow_virt_to_phys() returns 0 and hit the BUG_ON. Using __pa_nodebug() instead of __pa() will fix this BUG_ON. However, this code block, originally written for Pentiums and earlier, is no longer adequate since a 32-bit Xen guest has MTRRs disabled and supports ZONE_HIGHMEM. In this setup, this code sets UC attribute for accessing RAM in high memory range. Delete this code block as it has been unused for a long time. Reported-by: kernel test robot <ying.huang@linux.intel.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1460403360-25441-1-git-send-email-toshi.kani@hpe.com Link: https://lkml.org/lkml/2016/4/1/608 Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16x86/xen, pat: Remove PAT table init code from XenToshi Kani
commit 88ba281108ed0c25c9d292b48bd3f272fcb90dd0 upstream. Xen supports PAT without MTRRs for its guests. In order to enable WC attribute, it was necessary for xen_start_kernel() to call pat_init_cache_modes() to update PAT table before starting guest kernel. Now that the kernel initializes PAT table to the BIOS handoff state when MTRR is disabled, this Xen-specific PAT init code is no longer necessary. Delete it from xen_start_kernel(). Also change __init_cache_modes() to a static function since PAT table should not be tweaked by other modules. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Juergen Gross <jgross@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Toshi Kani <toshi.kani@hp.com> Cc: elliott@hpe.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-7-git-send-email-toshi.kani@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16x86/mtrr: Fix PAT init handling when MTRR is disabledToshi Kani
commit ad025a73f0e9344ac73ffe1b74c184033e08e7d5 upstream. get_mtrr_state() calls pat_init() on BSP even if MTRR is disabled. This results in calling pat_init() on BSP only since APs do not call pat_init() when MTRR is disabled. This inconsistency between BSP and APs leads to undefined behavior. Make BSP's calling condition to pat_init() consistent with AP's, mtrr_ap_init() and mtrr_aps_init(). Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Toshi Kani <toshi.kani@hp.com> Cc: elliott@hpe.com Cc: konrad.wilk@oracle.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-6-git-send-email-toshi.kani@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16x86/mtrr: Fix Xorg crashes in Qemu sessionsToshi Kani
commit edfe63ec97ed8d4496225f7ba54c9ce4207c5431 upstream. A Xorg failure on qemu32 was reported as a regression [1] caused by commit 9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled"). This patch fixes the Xorg crash. Negative effects of this regression were the following two failures [2] in Xorg on QEMU with QEMU CPU model "qemu32" (-cpu qemu32), which were triggered by the fact that its virtual CPU does not support MTRRs. #1. copy_process() failed in the check in reserve_pfn_range() copy_process copy_mm dup_mm dup_mmap copy_page_range track_pfn_copy reserve_pfn_range A WC map request was tracked as WC in memtype, which set a PTE as UC (pgprot) per __cachemode2pte_tbl[]. This led to this error in reserve_pfn_range() called from track_pfn_copy(), which obtained a pgprot from a PTE. It converts pgprot to page_cache_mode, which does not necessarily result in the original page_cache_mode since __cachemode2pte_tbl[] redirects multiple types to UC. #2. error path in copy_process() then hit WARN_ON_ONCE in untrack_pfn(). x86/PAT: Xorg:509 map pfn expected mapping type uncached- minus for [mem 0xfd000000-0xfdffffff], got write-combining Call Trace: dump_stack warn_slowpath_common ? untrack_pfn ? untrack_pfn warn_slowpath_null untrack_pfn ? __kunmap_atomic unmap_single_vma ? pagevec_move_tail_fn unmap_vmas exit_mmap mmput copy_process.part.47 _do_fork SyS_clone do_syscall_32_irqs_on entry_INT80_32 These negative effects are caused by two separate bugs, but they can be addressed in separate patches. Fixing the pat_init() issue described below addresses the root cause, and avoids Xorg to hit these cases. When the CPU does not support MTRRs, MTRR does not call pat_init(), which leaves PAT enabled without initializing PAT. This pat_init() issue is a long-standing issue, but manifested as issue #1 (and then hit issue #2) with the above-mentioned commit because the memtype now tracks cache attribute with 'page_cache_mode'. This pat_init() issue existed before the commit, but we used pgprot in memtype. Hence, we did not have issue #1 before. But WC request resulted in WT in effect because WC pgrot is actually WT when PAT is not initialized. This is not how it was designed to work. When PAT is set to disable properly, WC is converted to UC. The use of WT can result in a system crash if the target range does not support WT. Fortunately, nobody ran into such issue before. To fix this pat_init() issue, PAT code has been enhanced to provide pat_disable() interface. Call this interface when MTRRs are disabled. By setting PAT to disable properly, PAT bypasses the memtype check, and avoids issue #1. [1]: https://lkml.org/lkml/2016/3/3/828 [2]: https://lkml.org/lkml/2016/3/4/775 Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Toshi Kani <toshi.kani@hp.com> Cc: elliott@hpe.com Cc: konrad.wilk@oracle.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-5-git-send-email-toshi.kani@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()Toshi Kani
commit d63dcf49cf5ae5605f4d14229e3888e104f294b1 upstream. Borislav Petkov suggested: > Please use on init paths boot_cpu_has(X86_FEATURE_PAT) and on fast > paths static_cpu_has(X86_FEATURE_PAT). No more of that cpu_has_XXX > ugliness. Replace the use of cpu_has_pat on init paths with boot_cpu_has(). Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Elliott <elliott@hpe.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: konrad.wilk@oracle.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-4-git-send-email-toshi.kani@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16x86/mm/pat: Add pat_disable() interfaceToshi Kani
commit 224bb1e5d67ba0f2872c98002d6a6f991ac6fd4a upstream. In preparation for fixing a regression caused by: 9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled") ... PAT needs to provide an interface that prevents the OS from initializing the PAT MSR. PAT MSR initialization must be done on all CPUs using the specific sequence of operations defined in the Intel SDM. This requires MTRRs to be enabled since pat_init() is called as part of MTRR init from mtrr_rendezvous_handler(). Make pat_disable() as the interface that prevents the OS from initializing the PAT MSR. MTRR will call this interface when it cannot provide the SDM-defined sequence to initialize PAT. This also assures that pat_disable() called from pat_bsp_init() will set the PAT table properly when CPU does not support PAT. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Elliott <elliott@hpe.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: konrad.wilk@oracle.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-3-git-send-email-toshi.kani@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16x86/mm/pat: Add support of non-default PAT MSR settingToshi Kani
commit 02f037d641dc6672be5cfe7875a48ab99b95b154 upstream. In preparation for fixing a regression caused by: 9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")' ... PAT needs to support a case that PAT MSR is initialized with a non-default value. When pat_init() is called and PAT is disabled, it initializes the PAT table with the BIOS default value. Xen, however, sets PAT MSR with a non-default value to enable WC. This causes inconsistency between the PAT table and PAT MSR when PAT is set to disable on Xen. Change pat_init() to handle the PAT disable cases properly. Add init_cache_modes() to handle two cases when PAT is set to disable. 1. CPU supports PAT: Set PAT table to be consistent with PAT MSR. 2. CPU does not support PAT: Set PAT table to be consistent with PWT and PCD bits in a PTE. Note, __init_cache_modes(), renamed from pat_init_cache_modes(), will be changed to a static function in a later patch. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Toshi Kani <toshi.kani@hp.com> Cc: elliott@hpe.com Cc: konrad.wilk@oracle.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16Revert "s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL"Michael Holzheu
commit 5419447e2142d6ed68c9f5c1a28630b3a290a845 upstream. This reverts commit 852ffd0f4e23248b47531058e531066a988434b5. There are use cases where an intermediate boot kernel (1) uses kexec to boot the final production kernel (2). For this scenario we should provide the original boot information to the production kernel (2). Therefore clearing the boot information during kexec() should not be done. Reported-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16KEYS: 64-bit MIPS needs to use compat_sys_keyctl for 32-bit userspaceDavid Howells
commit 20f06ed9f61a185c6dabd662c310bed6189470df upstream. MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl. The latter will work in a lot of cases, thereby hiding the issue. Reported-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: David Howells <dhowells@redhat.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: keyrings@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16arm: oabi compat: add missing access checksDave Weinstein
commit 7de249964f5578e67b99699c5f0b405738d820a2 upstream. Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop(). This fixes CVE-2016-3857, a local privilege escalation under CONFIG_OABI_COMPAT. Reported-by: Chiachih Wu <wuchiachih@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Dave Weinstein <olorin@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16x86/mm/32: Enable full randomization on i386 and X86_32Hector Marco-Gisbert
commit 8b8addf891de8a00e4d39fc32f93f7c5eb8feceb upstream. Currently on i386 and on X86_64 when emulating X86_32 in legacy mode, only the stack and the executable are randomized but not other mmapped files (libraries, vDSO, etc.). This patch enables randomization for the libraries, vDSO and mmap requests on i386 and in X86_32 in legacy mode. By default on i386 there are 8 bits for the randomization of the libraries, vDSO and mmaps which only uses 1MB of VA. This patch preserves the original randomness, using 1MB of VA out of 3GB or 4GB. We think that 1MB out of 3GB is not a big cost for having the ASLR. The first obvious security benefit is that all objects are randomized (not only the stack and the executable) in legacy mode which highly increases the ASLR effectiveness, otherwise the attackers may use these non-randomized areas. But also sensitive setuid/setgid applications are more secure because currently, attackers can disable the randomization of these applications by setting the ulimit stack to "unlimited". This is a very old and widely known trick to disable the ASLR in i386 which has been allowed for too long. Another trick used to disable the ASLR was to set the ADDR_NO_RANDOMIZE personality flag, but fortunately this doesn't work on setuid/setgid applications because there is security checks which clear Security-relevant flags. This patch always randomizes the mmap_legacy_base address, removing the possibility to disable the ASLR by setting the stack to "unlimited". Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es> Acked-by: Ismael Ripoll Ripoll <iripoll@upv.es> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/1457639460-5242-1-git-send-email-hecmargi@upv.es Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10perf/x86: fix PEBS issues on Intel Atom/Core2Stephane Eranian
commit 1424a09a9e1839285e948d4ea9fdfca26c9a2086 upstream. This patch fixes broken PEBS support on Intel Atom and Core2 due to wrong pointer arithmetic in intel_pmu_drain_pebs_core(). The get_next_pebs_record_by_bit() was called on PEBS format fmt0 which does not use the pebs_record_nhm layout. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Fixes: 21509084f999 ("perf/x86/intel: Handle multiple records in the PEBS buffer") Link: http://lkml.kernel.org/r/1449182000-31524-3-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10pvclock: Add CPU barriers to get correct version valueMinfei Huang
commit 749d088b8e7f4b9826ede02b9a043e417fa84aa1 upstream. Protocol for the "version" fields is: hypervisor raises it (making it uneven) before it starts updating the fields and raises it again (making it even) when it is done. Thus the guest can make sure the time values it got are consistent by checking the version before and after reading them. Add CPU barries after getting version value just like what function vread_pvclock does, because all of callees in this function is inline. Fixes: 502dfeff239e8313bfbe906ca0a1a6827ac8481b Signed-off-by: Minfei Huang <mnghuan@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)Vineet Gupta
commit f52e126cc7476196f44f3c313b7d9f0699a881fc upstream. With recent binutils update to support dwarf CFI pseudo-ops in gas, we now get .eh_frame vs. .debug_frame. Although the call frame info is exactly the same in both, the CIE differs, which the current kernel unwinder can't cope with. This broke both the kernel unwinder as well as loadable modules (latter because of a new unhandled relo R_ARC_32_PCREL from .rela.eh_frame in the module loader) The ideal solution would be to switch unwinder to .eh_frame. For now however we can make do by just ensureing .debug_frame is generated by removing -fasynchronous-unwind-tables .eh_frame generated with -gdwarf-2 -fasynchronous-unwind-tables .debug_frame generated with -gdwarf-2 Fixes STAR 9001058196 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10arc: unwind: warn only once if DW2_UNWIND is disabledAlexey Brodkin
commit 9bd54517ee86cb164c734f72ea95aeba4804f10b upstream. If CONFIG_ARC_DW2_UNWIND is disabled every time arc_unwind_core() gets called following message gets printed in debug console: ----------------->8--------------- CONFIG_ARC_DW2_UNWIND needs to be enabled ----------------->8--------------- That message makes sense if user indeed wants to see a backtrace or get nice function call-graphs in perf but what if user disabled unwinder for the purpose? Why pollute his debug console? So instead we'll warn user about possibly missing feature once and let him decide if that was what he or she really wanted. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10x86/quirks: Add early quirk to reset Apple AirPort cardLukas Wunner
commit abb2bafd295fe962bbadc329dbfb2146457283ac upstream. The EFI firmware on Macs contains a full-fledged network stack for downloading OS X images from osrecovery.apple.com. Unfortunately on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331 wireless card on every boot and leaves it enabled even after ExitBootServices has been called. The card continues to assert its IRQ line, causing spurious interrupts if the IRQ is shared. It also corrupts memory by DMAing received packets, allowing for remote code execution over the air. This only stops when a driver is loaded for the wireless card, which may be never if the driver is not installed or blacklisted. The issue seems to be constrained to the Broadcom 4331. Chris Milsted has verified that the newer Broadcom 4360 built into the MacBookPro11,3 (2013/2014) does not exhibit this behaviour. The chances that Apple will ever supply a firmware fix for the older machines appear to be zero. The solution is to reset the card on boot by writing to a reset bit in its mmio space. This must be done as an early quirk and not as a plain vanilla PCI quirk to successfully combat memory corruption by DMAed packets: Matthew Garrett found out in 2012 that the packets are written to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html). This type of memory is made available to the page allocator by efi_free_boot_services(). Plain vanilla PCI quirks run much later, in subsys initcall level. In-between a time window would be open for memory corruption. Random crashes occurring in this time window and attributed to DMAed packets have indeed been observed in the wild by Chris Bainbridge. When Matthew Garrett analyzed the memory corruption issue in 2012, he sought to fix it with a grub quirk which transitions the card to D3hot: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56 This approach does not help users with other bootloaders and while it may prevent DMAed packets, it does not cure the spurious interrupts emanating from the card. Unfortunately the card's mmio space is inaccessible in D3hot, so to reset it, we have to undo the effect of Matthew's grub patch and transition the card back to D0. Note that the quirk takes a few shortcuts to reduce the amount of code: The size of BAR 0 and the location of the PM capability is identical on all affected machines and therefore hardcoded. Only the address of BAR 0 differs between models. Also, it is assumed that the BCMA core currently mapped is the 802.11 core. The EFI driver seems to always take care of this. Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback towards finding the best solution to this problem. The following should be a comprehensive list of affected models: iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16] iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16] Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12] Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12] MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12] MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] For posterity, spurious interrupts caused by the Broadcom 4331 wireless card resulted in splats like this (stacktrace omitted): irq 17: nobody cared (try booting with the "irqpoll" option) handlers: [<ffffffff81374370>] pcie_isr [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci] [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec] Disabling IRQ #17 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732 Tested-by: Konstantin Simanov <k.simanov@stlk.ru> # [MacBookPro8,1] Tested-by: Lukas Wunner <lukas@wunner.de> # [MacBookPro9,1] Tested-by: Bryan Paradis <bryan.paradis@gmail.com> # [MacBookPro9,2] Tested-by: Andrew Worsley <amworsley@gmail.com> # [MacBookPro10,1] Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2] Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris Milsted <cmilsted@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Michael Buesch <m@bues.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: b43-dev@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linux-wireless@vger.kernel.org Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de [ Did minor readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10x86/quirks: Reintroduce scanning of secondary busesLukas Wunner
commit 850c321027c2e31d0afc71588974719a4b565550 upstream. We used to scan secondary buses until the following commit that was applied in 2009: 8659c406ade3 ("x86: only scan the root bus in early PCI quirks") which commit constrained early quirks to the root bus only. Its motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to add a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs, which is located on a secondary bus behind a PCIe root port. To facilitate that, reintroduce scanning of secondary buses. The commit message of 8659c406ade3 notes that scanning only the root bus "saves quite some unnecessary scanning work". The algorithm used prior to 8659c406ade3 was particularly time consuming because it scanned buses 0 to 31 brute force. To avoid lengthening boot time, employ a recursive strategy which only scans buses that are actually reachable from the root bus. Yinghai Lu pointed out that the secondary bus number read from a bridge's config space may be invalid, in particular a value of 0 would cause an infinite loop. The PCI core goes beyond that and recurses to a child bus only if its bus number is greater than the parent bus number (see pci_scan_bridge()). Since the root bus is numbered 0, this implies that secondary buses may not be 0. Do the same on early scanning. If this algorithm is found to significantly impact boot time or cause infinite loops on broken hardware, it would be possible to limit its recursion depth: The Broadcom 4331 quirk applies at depth 1, all others at depth 0, so the bus need not be scanned deeper than that for now. An alternative approach would be to revert to scanning only the root bus, and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12 and 8086:1e16. Apple always positioned the card behind either of these three ports. The quirk would then check presence of the card in slot 0 below the root port and do its deed. Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/f0daa70dac1a9b2483abdb31887173eb6ab77bdf.1465690253.git.lukas@wunner.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10x86/quirks: Apply nvidia_bugs quirk only on root busLukas Wunner
commit 447d29d1d3aed839e74c2401ef63387780ac51ed upstream. Since the following commit: 8659c406ade3 ("x86: only scan the root bus in early PCI quirks") ... early quirks are only applied to devices on the root bus. The motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to reintroduce scanning of secondary buses for a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent regressions, open code the requirement to apply nvidia_bugs only on the root bus. Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/4d5477c1d76b2f0387a780f2142bbcdd9fee869b.1465690253.git.lukas@wunner.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27s390: fix test_fp_ctl inline assembly contraintsMartin Schwidefsky
commit bcf4dd5f9ee096bd1510f838dd4750c35df4e38b upstream. The test_fp_ctl function is used to test if a given value is a valid floating-point control. The inline assembly in test_fp_ctl uses an incorrect constraint for the 'orig_fpc' variable. If the compiler chooses the same register for 'fpc' and 'orig_fpc' the test_fp_ctl() function always returns true. This allows user space to trigger kernel oopses with invalid floating-point control values on the signal stack. This problem has been introduced with git commit 4725c86055f5bbdcdf "s390: fix save and restore of the floating-point-control register" Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ARM: mvebu: fix HW I/O coherency related deadlocksThomas Petazzoni
commit c5379ba8fccd99d5f99632c789f0393d84a57805 upstream. Until now, our understanding for HW I/O coherency to work on the Cortex-A9 based Marvell SoC was that only the PCIe regions should be mapped strongly-ordered. However, we were still encountering some deadlocks, especially when testing the CESA crypto engine. After checking with the HW designers, it was concluded that all the MMIO registers should be mapped as strongly ordered for the HW I/O coherency mechanism to work properly. This fixes some easy to reproduce deadlocks with the CESA crypto engine driver (dmcrypt on a sufficiently large disk partition). Tested-by: Terry Stockert <stockert@inkblotadmirer.me> Tested-by: Romain Perier <romain.perier@free-electrons.com> Cc: Terry Stockert <stockert@inkblotadmirer.me> Cc: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 LinksysThomas Petazzoni
commit 929e604efa3dc0522214e0dc18984be23993e9f0 upstream. When the support for the Marvell crypto engine was added in the Device Tree of the various Armada 385 Device Tree files in commit d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards"), a typo was made in the MBus window attributes for the Armada 385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit fixes this typo, which makes the CESA engines operational on Armada 385 Linksys boards. Reported-by: Terry Stockert <stockert@inkblotadmirer.me> Cc: Terry Stockert <stockert@inkblotadmirer.me> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13Boris Brezillon
commit 5fc39d347267bd029fcc9099c70e2fe2d53130e9 upstream. The sun4i-timer driver registers its sched_clock only if the machine is compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or "allwinner,sun4i-a10". Add the missing "allwinner,sun5i-a13" string to the machine compatible. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 465a225fb2af ("ARM: sun5i: Add C.H.I.P DTS") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27perf/x86: Fix undefined shift on 32-bit kernelsAndrey Ryabinin
commit 6d6f2833bfbf296101f9f085e10488aef2601ba5 upstream. Jim reported: UBSAN: Undefined behaviour in arch/x86/events/intel/core.c:3708:12 shift exponent 35 is too large for 32-bit type 'long unsigned int' The use of 'unsigned long' type obviously is not correct here, make it 'unsigned long long' instead. Reported-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Imre Palik <imrep@amazon.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 2c33645d366d ("perf/x86: Honor the architectural performance monitoring version") Link: http://lkml.kernel.org/r/1462974711-10037-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Kevin Christopher <kevinc@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27arm64: Rework valid_user_regsMark Rutland
commit dbd4d7ca563fd0a8949718d35ce197e5642d5d9d upstream. We validate pstate using PSR_MODE32_BIT, which is part of the user-provided pstate (and cannot be trusted). Also, we conflate validation of AArch32 and AArch64 pstate values, making the code difficult to reason about. Instead, validate the pstate value based on the associated task. The task may or may not be current (e.g. when using ptrace), so this must be passed explicitly by callers. To avoid circular header dependencies via sched.h, is_compat_task is pulled out of asm/ptrace.h. To make the code possible to reason about, the AArch64 and AArch32 validation is split into separate functions. Software must respect the RES0 policy for SPSR bits, and thus the kernel mirrors the hardware policy (RAZ/WI) for bits as-yet unallocated. When these acquire an architected meaning writes may be permitted (potentially with additional validation). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Dave Martin <dave.martin@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [ rebased for v4.1+ This avoids a user-triggerable Oops() if a task is switched to a mode not supported by the kernel (e.g. switching a 64-bit task to AArch32). ] Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> [backport] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27KVM: nVMX: VMX instructions: fix segment checks when L1 is in long mode.Quentin Casasnovas
commit ff30ef40deca4658e27b0c596e7baf39115e858f upstream. I couldn't get Xen to boot a L2 HVM when it was nested under KVM - it was getting a GP(0) on a rather unspecial vmread from Xen: (XEN) ----[ Xen-4.7.0-rc x86_64 debug=n Not tainted ]---- (XEN) CPU: 1 (XEN) RIP: e008:[<ffff82d0801e629e>] vmx_get_segment_register+0x14e/0x450 (XEN) RFLAGS: 0000000000010202 CONTEXT: hypervisor (d1v0) (XEN) rax: ffff82d0801e6288 rbx: ffff83003ffbfb7c rcx: fffffffffffab928 (XEN) rdx: 0000000000000000 rsi: 0000000000000000 rdi: ffff83000bdd0000 (XEN) rbp: ffff83000bdd0000 rsp: ffff83003ffbfab0 r8: ffff830038813910 (XEN) r9: ffff83003faf3958 r10: 0000000a3b9f7640 r11: ffff83003f82d418 (XEN) r12: 0000000000000000 r13: ffff83003ffbffff r14: 0000000000004802 (XEN) r15: 0000000000000008 cr0: 0000000080050033 cr4: 00000000001526e0 (XEN) cr3: 000000003fc79000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 (XEN) Xen code around <ffff82d0801e629e> (vmx_get_segment_register+0x14e/0x450): (XEN) 00 00 41 be 02 48 00 00 <44> 0f 78 74 24 08 0f 86 38 56 00 00 b8 08 68 00 (XEN) Xen stack trace from rsp=ffff83003ffbfab0: ... (XEN) Xen call trace: (XEN) [<ffff82d0801e629e>] vmx_get_segment_register+0x14e/0x450 (XEN) [<ffff82d0801f3695>] get_page_from_gfn_p2m+0x165/0x300 (XEN) [<ffff82d0801bfe32>] hvmemul_get_seg_reg+0x52/0x60 (XEN) [<ffff82d0801bfe93>] hvm_emulate_prepare+0x53/0x70 (XEN) [<ffff82d0801ccacb>] handle_mmio+0x2b/0xd0 (XEN) [<ffff82d0801be591>] emulate.c#_hvm_emulate_one+0x111/0x2c0 (XEN) [<ffff82d0801cd6a4>] handle_hvm_io_completion+0x274/0x2a0 (XEN) [<ffff82d0801f334a>] __get_gfn_type_access+0xfa/0x270 (XEN) [<ffff82d08012f3bb>] timer.c#add_entry+0x4b/0xb0 (XEN) [<ffff82d08012f80c>] timer.c#remove_entry+0x7c/0x90 (XEN) [<ffff82d0801c8433>] hvm_do_resume+0x23/0x140 (XEN) [<ffff82d0801e4fe7>] vmx_do_resume+0xa7/0x140 (XEN) [<ffff82d080164aeb>] context_switch+0x13b/0xe40 (XEN) [<ffff82d080128e6e>] schedule.c#schedule+0x22e/0x570 (XEN) [<ffff82d08012c0cc>] softirq.c#__do_softirq+0x5c/0x90 (XEN) [<ffff82d0801602c5>] domain.c#idle_loop+0x25/0x50 (XEN) (XEN) (XEN) **************************************** (XEN) Panic on CPU 1: (XEN) GENERAL PROTECTION FAULT (XEN) [error_code=0000] (XEN) **************************************** Tracing my host KVM showed it was the one injecting the GP(0) when emulating the VMREAD and checking the destination segment permissions in get_vmx_mem_address(): 3) | vmx_handle_exit() { 3) | handle_vmread() { 3) | nested_vmx_check_permission() { 3) | vmx_get_segment() { 3) 0.074 us | vmx_read_guest_seg_base(); 3) 0.065 us | vmx_read_guest_seg_selector(); 3) 0.066 us | vmx_read_guest_seg_ar(); 3) 1.636 us | } 3) 0.058 us | vmx_get_rflags(); 3) 0.062 us | vmx_read_guest_seg_ar(); 3) 3.469 us | } 3) | vmx_get_cs_db_l_bits() { 3) 0.058 us | vmx_read_guest_seg_ar(); 3) 0.662 us | } 3) | get_vmx_mem_address() { 3) 0.068 us | vmx_cache_reg(); 3) | vmx_get_segment() { 3) 0.074 us | vmx_read_guest_seg_base(); 3) 0.068 us | vmx_read_guest_seg_selector(); 3) 0.071 us | vmx_read_guest_seg_ar(); 3) 1.756 us | } 3) | kvm_queue_exception_e() { 3) 0.066 us | kvm_multiple_exception(); 3) 0.684 us | } 3) 4.085 us | } 3) 9.833 us | } 3) + 10.366 us | } Cross-checking the KVM/VMX VMREAD emulation code with the Intel Software Developper Manual Volume 3C - "VMREAD - Read Field from Virtual-Machine Control Structure", I found that we're enforcing that the destination operand is NOT located in a read-only data segment or any code segment when the L1 is in long mode - BUT that check should only happen when it is in protected mode. Shuffling the code a bit to make our emulation follow the specification allows me to boot a Xen dom0 in a nested KVM and start HVM L2 guests without problems. Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Eugene Korenevsky <ekorenevsky@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ARCv2: LLSC: software backoff is NOT needed starting HS2.1cVineet Gupta
commit b31ac42697bef4a3aa5d0aa42375a55657f57174 upstream. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ARCv2: Check for LL-SC livelock only if LLSC is enabledVineet Gupta
commit 4d0cb15fccd1db9dac0c964b2ccf10874e69f5b8 upstream. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27MIPS: KVM: Fix modular KVM under QEMUJames Hogan
commit 797179bc4fe06c89e47a9f36f886f68640b423f8 upstream. Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never get a TLB refill exception in it when KVM is built as a module. This was observed to happen with the host MIPS kernel running under QEMU, due to a not entirely transparent optimisation in the QEMU TLB handling where TLB entries replaced with TLBWR are copied to a separate part of the TLB array. Code in those pages continue to be executable, but those mappings persist only until the next ASID switch, even if they are marked global. An ASID switch happens in __kvm_mips_vcpu_run() at exception level after switching to the guest exception base. Subsequent TLB mapped kernel instructions just prior to switching to the guest trigger a TLB refill exception, which enters the guest exception handlers without updating EPC. This appears as a guest triggered TLB refill on a host kernel mapped (host KSeg2) address, which is not handled correctly as user (guest) mode accesses to kernel (host) segments always generate address error exceptions. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ARM: 8579/1: mm: Fix definition of pmd_mknotpresentSteve Capper
commit 56530f5d2ddc9b9fade7ef8db9cb886e9dc689b5 upstream. Currently pmd_mknotpresent will use a zero entry to respresent an invalidated pmd. Unfortunately this definition clashes with pmd_none, thus it is possible for a race condition to occur if zap_pmd_range sees pmd_none whilst __split_huge_pmd_locked is running too with pmdp_invalidate just called. This patch fixes the race condition by modifying pmd_mknotpresent to create non-zero faulting entries (as is done in other architectures), removing the ambiguity with pmd_none. [catalin.marinas@arm.com: using L_PMD_SECT_VALID instead of PMD_TYPE_SECT] Fixes: 8d9625070073 ("ARM: mm: Transparent huge page support for LPAE systems.") Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ARM: 8578/1: mm: ensure pmd_present only checks the valid bitWill Deacon
commit 624531886987f0f1b5d01fb598034d039198e090 upstream. In a subsequent patch, pmd_mknotpresent will clear the valid bit of the pmd entry, resulting in a not-present entry from the hardware's perspective. Unfortunately, pmd_present simply checks for a non-zero pmd value and will therefore continue to return true even after a pmd_mknotpresent operation. Since pmd_mknotpresent is only used for managing huge entries, this is only an issue for the 3-level case. This patch fixes the 3-level pmd_present implementation to take into account the valid bit. For bisectability, the change is made before the fix to pmd_mknotpresent. [catalin.marinas@arm.com: comment update regarding pmd_mknotpresent patch] Fixes: 8d9625070073 ("ARM: mm: Transparent huge page support for LPAE systems.") Cc: Russell King <linux@armlinux.org.uk> Cc: Steve Capper <Steve.Capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ARM: imx6ul: Fix Micrel PHY maskFabio Estevam
commit 20c15226d1c73150c4d9107301cac5dda0b7f995 upstream. The value used for Micrel PHY mask is not correct. Use the MICREL_PHY_ID_MASK definition instead. Thanks to Jiri Luznicky for proposing the fix at https://community.freescale.com/thread/387739 Fixes: 709bc0657fe6f9f55 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27x86/amd_nb: Fix boot crash on non-AMD systemsBorislav Petkov
commit 1ead852dd88779eda12cb09cc894a03d9abfe1ec upstream. Fix boot crash that triggers if this driver is built into a kernel and run on non-AMD systems. AMD northbridges users call amd_cache_northbridges() and it returns a negative value to signal that we weren't able to cache/detect any northbridges on the system. At least, it should do so as all its callers expect it to do so. But it does return a negative value only when kmalloc() fails. Fix it to return -ENODEV if there are no NBs cached as otherwise, amd_nb users like amd64_edac, for example, which relies on it to know whether it should load or not, gets loaded on systems like Intel Xeons where it shouldn't. Reported-and-tested-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1466097230-5333-2-git-send-email-bp@alien8.de Link: https://lkml.kernel.org/r/5761BEB0.9000807@cybernetics.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27kprobes/x86: Clear TF bit in fault on single-steppingMasami Hiramatsu
commit dcfc47248d3f7d28df6f531e6426b933de94370d upstream. Fix kprobe_fault_handler() to clear the TF (trap flag) bit of the flags register in the case of a fault fixup on single-stepping. If we put a kprobe on the instruction which caused a page fault (e.g. actual mov instructions in copy_user_*), that fault happens on the single-stepping buffer. In this case, kprobes resets running instance so that the CPU can retry execution on the original ip address. However, current code forgets to reset the TF bit. Since this fault happens with TF bit set for enabling single-stepping, when it retries, it causes a debug exception and kprobes can not handle it because it already reset itself. On the most of x86-64 platform, it can be easily reproduced by using kprobe tracer. E.g. # cd /sys/kernel/debug/tracing # echo p copy_user_enhanced_fast_string+5 > kprobe_events # echo 1 > events/kprobes/enable And you'll see a kernel panic on do_debug(), since the debug trap is not handled by kprobes. To fix this problem, we just need to clear the TF bit when resetting running kprobe. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20160611140648.25885.37482.stgit@devbox [ Updated the comments. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27x86, build: copy ldlinux.c32 to image.isoH. Peter Anvin
commit 9c77679cadb118c0aa99e6f88533d91765a131ba upstream. For newer versions of Syslinux, we need ldlinux.c32 in addition to isolinux.bin to reside on the boot disk, so if the latter is found, copy it, too, to the isoimage tree. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27powerpc/tm: Always reclaim in start_thread() for exec() class syscallsCyril Bur
commit 8e96a87c5431c256feb65bcfc5aec92d9f7839b6 upstream. Userspace can quite legitimately perform an exec() syscall with a suspended transaction. exec() does not return to the old process, rather it load a new one and starts that, the expectation therefore is that the new process starts not in a transaction. Currently exec() is not treated any differently to any other syscall which creates problems. Firstly it could allow a new process to start with a suspended transaction for a binary that no longer exists. This means that the checkpointed state won't be valid and if the suspended transaction were ever to be resumed and subsequently aborted (a possibility which is exceedingly likely as exec()ing will likely doom the transaction) the new process will jump to invalid state. Secondly the incorrect attempt to keep the transactional state while still zeroing state for the new process creates at least two TM Bad Things. The first triggers on the rfid to return to userspace as start_thread() has given the new process a 'clean' MSR but the suspend will still be set in the hardware MSR. The second TM Bad Thing triggers in __switch_to() as the processor is still transactionally suspended but __switch_to() wants to zero the TM sprs for the new process. This is an example of the outcome of calling exec() with a suspended transaction. Note the first 700 is likely the first TM bad thing decsribed earlier only the kernel can't report it as we've loaded userspace registers. c000000000009980 is the rfid in fast_exception_return() Bad kernel stack pointer 3fffcfa1a370 at c000000000009980 Oops: Bad kernel stack pointer, sig: 6 [#1] CPU: 0 PID: 2006 Comm: tm-execed Not tainted NIP: c000000000009980 LR: 0000000000000000 CTR: 0000000000000000 REGS: c00000003ffefd40 TRAP: 0700 Not tainted MSR: 8000000300201031 <SF,ME,IR,DR,LE,TM[SE]> CR: 00000000 XER: 00000000 CFAR: c0000000000098b4 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 00003fffcfa1a370 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 00003fff966611c0 0000000000000000 0000000000000000 0000000000000000 NIP [c000000000009980] fast_exception_return+0xb0/0xb8 LR [0000000000000000] (null) Call Trace: Instruction dump: f84d0278 e9a100d8 7c7b03a6 e84101a0 7c4ff120 e8410170 7c5a03a6 e8010070 e8410080 e8610088 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed023b Kernel BUG at c000000000043e80 [verbose debug info unavailable] Unexpected TM Bad Thing exception at c000000000043e80 (msr 0x201033) Oops: Unrecoverable exception, sig: 6 [#2] CPU: 0 PID: 2006 Comm: tm-execed Tainted: G D task: c0000000fbea6d80 ti: c00000003ffec000 task.ti: c0000000fb7ec000 NIP: c000000000043e80 LR: c000000000015a24 CTR: 0000000000000000 REGS: c00000003ffef7e0 TRAP: 0700 Tainted: G D MSR: 8000000300201033 <SF,ME,IR,DR,RI,LE,TM[SE]> CR: 28002828 XER: 00000000 CFAR: c000000000015a20 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 c00000003ffefa60 c000000000db5500 c0000000fbead000 GPR04: 8000000300001033 2222222222222222 2222222222222222 00000000ff160000 GPR08: 0000000000000000 800000010000d033 c0000000fb7e3ea0 c00000000fe00004 GPR12: 0000000000002200 c00000000fe00000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c0000000fbea7410 00000000ff160000 GPR24: c0000000ffe1f600 c0000000fbea8700 c0000000fbea8700 c0000000fbead000 GPR28: c000000000e20198 c0000000fbea6d80 c0000000fbeab680 c0000000fbea6d80 NIP [c000000000043e80] tm_restore_sprs+0xc/0x1c LR [c000000000015a24] __switch_to+0x1f4/0x420 Call Trace: Instruction dump: 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 This fixes CVE-2016-5828. Fixes: bc2a9408fa65 ("powerpc: Hook in new transactional memory code") Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was addedMichael Ellerman
commit 2c2a63e301fd19ccae673e79de59b30a232ff7f9 upstream. The recent commit 7cc851039d64 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") added a new PVR mask & value to the start of the ibm_architecture_vec[] array. However it missed the fact that further down in the array, we hard code the offset of one of the fields, and then at boot use that value to patch the value in the array. This means every update to the array must also update the #define, ugh. This means that on pseries machines we will misreport to firmware the number of cores we support, by a factor of threads_per_core. Fix it for now by updating the #define. Fixes: 7cc851039d64 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27powerpc/pseries: Fix PCI config address for DDWGavin Shan
commit 8a934efe94347eee843aeea65bdec8077a79e259 upstream. In commit 8445a87f7092 "powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism", the PE address was replaced with the PCI config address in order to remove dependency on EEH. According to PAPR spec, firmware (pHyp or QEMU) should accept "xxBBSSxx" format PCI config address, not "xxxxBBSS" provided by the patch. Note that "BB" is PCI bus number and "SS" is the combination of slot and function number. This fixes the PCI address passed to DDW RTAS calls. Fixes: 8445a87f7092 ("powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism") Reported-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27powerpc/iommu: Remove the dependency on EEH struct in DDW mechanismGuilherme G. Piccoli
commit 8445a87f7092bc8336ea1305be9306f26b846d93 upstream. Commit 39baadbf36ce ("powerpc/eeh: Remove eeh information from pci_dn") changed the pci_dn struct by removing its EEH-related members. As part of this clean-up, DDW mechanism was modified to read the device configuration address from eeh_dev struct. As a consequence, now if we disable EEH mechanism on kernel command-line for example, the DDW mechanism will fail, generating a kernel oops by dereferencing a NULL pointer (which turns to be the eeh_dev pointer). This patch just changes the configuration address calculation on DDW functions to a manual calculation based on pci_dn members instead of using eeh_dev-based address. No functional changes were made. This was tested on pSeries, both in PHyp and qemu guest. Fixes: 39baadbf36ce ("powerpc/eeh: Remove eeh information from pci_dn") Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24MIPS: Fix 64k page support for 32 bit kernels.Ralf Baechle
commit d7de413475f443957a0c1d256e405d19b3a2cb22 upstream. TASK_SIZE was defined as 0x7fff8000UL which for 64k pages is not a multiple of the page size. Somewhere further down the math fails such that executing an ELF binary fails. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: James Hogan <james.hogan@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc64: Fix return from trap window fill crashes.David S. Miller
[ Upstream commit 7cafc0b8bf130f038b0ec2dcdd6a9de6dc59b65a ] We must handle data access exception as well as memory address unaligned exceptions from return from trap window fill faults, not just normal TLB misses. Otherwise we can get an OOPS that looks like this: ld-linux.so.2(36808): Kernel bad sw trap 5 [#1] CPU: 1 PID: 36808 Comm: ld-linux.so.2 Not tainted 4.6.0 #34 task: fff8000303be5c60 ti: fff8000301344000 task.ti: fff8000301344000 TSTATE: 0000004410001601 TPC: 0000000000a1a784 TNPC: 0000000000a1a788 Y: 00000002 Not tainted TPC: <do_sparc64_fault+0x5c4/0x700> g0: fff8000024fc8248 g1: 0000000000db04dc g2: 0000000000000000 g3: 0000000000000001 g4: fff8000303be5c60 g5: fff800030e672000 g6: fff8000301344000 g7: 0000000000000001 o0: 0000000000b95ee8 o1: 000000000000012b o2: 0000000000000000 o3: 0000000200b9b358 o4: 0000000000000000 o5: fff8000301344040 sp: fff80003013475c1 ret_pc: 0000000000a1a77c RPC: <do_sparc64_fault+0x5bc/0x700> l0: 00000000000007ff l1: 0000000000000000 l2: 000000000000005f l3: 0000000000000000 l4: fff8000301347e98 l5: fff8000024ff3060 l6: 0000000000000000 l7: 0000000000000000 i0: fff8000301347f60 i1: 0000000000102400 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000000000 i6: fff80003013476a1 i7: 0000000000404d4c I7: <user_rtt_fill_fixup+0x6c/0x7c> Call Trace: [0000000000404d4c] user_rtt_fill_fixup+0x6c/0x7c The window trap handlers are slightly clever, the trap table entries for them are composed of two pieces of code. First comes the code that actually performs the window fill or spill trap handling, and then there are three instructions at the end which are for exception processing. The userland register window fill handler is: add %sp, STACK_BIAS + 0x00, %g1; \ ldxa [%g1 + %g0] ASI, %l0; \ mov 0x08, %g2; \ mov 0x10, %g3; \ ldxa [%g1 + %g2] ASI, %l1; \ mov 0x18, %g5; \ ldxa [%g1 + %g3] ASI, %l2; \ ldxa [%g1 + %g5] ASI, %l3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %l4; \ ldxa [%g1 + %g2] ASI, %l5; \ ldxa [%g1 + %g3] ASI, %l6; \ ldxa [%g1 + %g5] ASI, %l7; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i0; \ ldxa [%g1 + %g2] ASI, %i1; \ ldxa [%g1 + %g3] ASI, %i2; \ ldxa [%g1 + %g5] ASI, %i3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i4; \ ldxa [%g1 + %g2] ASI, %i5; \ ldxa [%g1 + %g3] ASI, %i6; \ ldxa [%g1 + %g5] ASI, %i7; \ restored; \ retry; nop; nop; nop; nop; \ b,a,pt %xcc, fill_fixup_dax; \ b,a,pt %xcc, fill_fixup_mna; \ b,a,pt %xcc, fill_fixup; And the way this works is that if any of those memory accesses generate an exception, the exception handler can revector to one of those final three branch instructions depending upon which kind of exception the memory access took. In this way, the fault handler doesn't have to know if it was a spill or a fill that it's handling the fault for. It just always branches to the last instruction in the parent trap's handler. For example, for a regular fault, the code goes: winfix_trampoline: rdpr %tpc, %g3 or %g3, 0x7c, %g3 wrpr %g3, %tnpc done All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the trap time program counter, we'll get that final instruction in the trap handler. On return from trap, we have to pull the register window in but we do this by hand instead of just executing a "restore" instruction for several reasons. The largest being that from Niagara and onward we simply don't have enough levels in the trap stack to fully resolve all possible exception cases of a window fault when we are already at trap level 1 (which we enter to get ready to return from the original trap). This is executed inline via the FILL_*_RTRAP handlers. rtrap_64.S's code branches directly to these to do the window fill by hand if necessary. Now if you look at them, we'll see at the end: ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; And oops, all three cases are handled like a fault. This doesn't work because each of these trap types (data access exception, memory address unaligned, and faults) store their auxiliary info in different registers to pass on to the C handler which does the real work. So in the case where the stack was unaligned, the unaligned trap handler sets up the arg registers one way, and then we branched to the fault handler which expects them setup another way. So the FAULT_TYPE_* value ends up basically being garbage, and randomly would generate the backtrace seen above. Reported-by: Nick Alcock <nix@esperi.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc: Harden signal return frame checks.David S. Miller
[ Upstream commit d11c2a0de2824395656cf8ed15811580c9dd38aa ] All signal frames must be at least 16-byte aligned, because that is the alignment we explicitly create when we build signal return stack frames. All stack pointers must be at least 8-byte aligned. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc64: Take ctx_alloc_lock properly in hugetlb_setup().David S. Miller
[ Upstream commit 9ea46abe22550e3366ff7cee2f8391b35b12f730 ] On cheetahplus chips we take the ctx_alloc_lock in order to modify the TLB lookup parameters for the indexed TLBs, which are stored in the context register. This is called with interrupts disabled, however ctx_alloc_lock is an IRQ safe lock, therefore we must take acquire/release it properly with spin_{lock,unlock}_irq(). Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc64: Reduce TLB flushes during hugepte changesNitin Gupta
[ Upstream commit 24e49ee3d76b70853a96520e46b8837e5eae65b2 ] During hugepage map/unmap, TSB and TLB flushes are currently issued at every PAGE_SIZE'd boundary which is unnecessary. We now issue the flush at REAL_HPAGE_SIZE boundaries only. Without this patch workloads which unmap a large hugepage backed VMA region get CPU lockups due to excessive TLB flush calls. Orabug: 22365539, 22643230, 22995196 Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc/PCI: Fix for panic while enabling SR-IOVBabu Moger
[ Upstream commit d0c31e02005764dae0aab130a57e9794d06b824d ] We noticed this panic while enabling SR-IOV in sparc. mlx4_core: Mellanox ConnectX core driver v2.2-1 (Jan 1 2015) mlx4_core: Initializing 0007:01:00.0 mlx4_core 0007:01:00.0: Enabling SR-IOV with 5 VFs mlx4_core: Initializing 0007:01:00.1 Unable to handle kernel NULL pointer dereference insmod(10010): Oops [#1] CPU: 391 PID: 10010 Comm: insmod Not tainted 4.1.12-32.el6uek.kdump2.sparc64 #1 TPC: <dma_supported+0x20/0x80> I7: <__mlx4_init_one+0x324/0x500 [mlx4_core]> Call Trace: [00000000104c5ea4] __mlx4_init_one+0x324/0x500 [mlx4_core] [00000000104c613c] mlx4_init_one+0xbc/0x120 [mlx4_core] [0000000000725f14] local_pci_probe+0x34/0xa0 [0000000000726028] pci_call_probe+0xa8/0xe0 [0000000000726310] pci_device_probe+0x50/0x80 [000000000079f700] really_probe+0x140/0x420 [000000000079fa24] driver_probe_device+0x44/0xa0 [000000000079fb5c] __device_attach+0x3c/0x60 [000000000079d85c] bus_for_each_drv+0x5c/0xa0 [000000000079f588] device_attach+0x88/0xc0 [000000000071acd0] pci_bus_add_device+0x30/0x80 [0000000000736090] virtfn_add.clone.1+0x210/0x360 [00000000007364a4] sriov_enable+0x2c4/0x520 [000000000073672c] pci_enable_sriov+0x2c/0x40 [00000000104c2d58] mlx4_enable_sriov+0xf8/0x180 [mlx4_core] [00000000104c49ac] mlx4_load_one+0x42c/0xd40 [mlx4_core] Disabling lock debugging due to kernel taint Caller[00000000104c5ea4]: __mlx4_init_one+0x324/0x500 [mlx4_core] Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core] Caller[0000000000725f14]: local_pci_probe+0x34/0xa0 Caller[0000000000726028]: pci_call_probe+0xa8/0xe0 Caller[0000000000726310]: pci_device_probe+0x50/0x80 Caller[000000000079f700]: really_probe+0x140/0x420 Caller[000000000079fa24]: driver_probe_device+0x44/0xa0 Caller[000000000079fb5c]: __device_attach+0x3c/0x60 Caller[000000000079d85c]: bus_for_each_drv+0x5c/0xa0 Caller[000000000079f588]: device_attach+0x88/0xc0 Caller[000000000071acd0]: pci_bus_add_device+0x30/0x80 Caller[0000000000736090]: virtfn_add.clone.1+0x210/0x360 Caller[00000000007364a4]: sriov_enable+0x2c4/0x520 Caller[000000000073672c]: pci_enable_sriov+0x2c/0x40 Caller[00000000104c2d58]: mlx4_enable_sriov+0xf8/0x180 [mlx4_core] Caller[00000000104c49ac]: mlx4_load_one+0x42c/0xd40 [mlx4_core] Caller[00000000104c5f90]: __mlx4_init_one+0x410/0x500 [mlx4_core] Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core] Caller[0000000000725f14]: local_pci_probe+0x34/0xa0 Caller[0000000000726028]: pci_call_probe+0xa8/0xe0 Caller[0000000000726310]: pci_device_probe+0x50/0x80 Caller[000000000079f700]: really_probe+0x140/0x420 Caller[000000000079fa24]: driver_probe_device+0x44/0xa0 Caller[000000000079fb08]: __driver_attach+0x88/0xa0 Caller[000000000079d90c]: bus_for_each_dev+0x6c/0xa0 Caller[000000000079f29c]: driver_attach+0x1c/0x40 Caller[000000000079e35c]: bus_add_driver+0x17c/0x220 Caller[00000000007a02d4]: driver_register+0x74/0x120 Caller[00000000007263fc]: __pci_register_driver+0x3c/0x60 Caller[00000000104f62bc]: mlx4_init+0x60/0xcc [mlx4_core] Kernel panic - not syncing: Fatal exception Press Stop-A (L1-A) to return to the boot prom ---[ end Kernel panic - not syncing: Fatal exception Details: Here is the call sequence virtfn_add->__mlx4_init_one->dma_set_mask->dma_supported The panic happened at line 760(file arch/sparc/kernel/iommu.c) 758 int dma_supported(struct device *dev, u64 device_mask) 759 { 760 struct iommu *iommu = dev->archdata.iommu; 761 u64 dma_addr_mask = iommu->dma_addr_mask; 762 763 if (device_mask >= (1UL << 32UL)) 764 return 0; 765 766 if ((device_mask & dma_addr_mask) == dma_addr_mask) 767 return 1; 768 769 #ifdef CONFIG_PCI 770 if (dev_is_pci(dev)) 771 return pci64_dma_supported(to_pci_dev(dev), device_mask); 772 #endif 773 774 return 0; 775 } 776 EXPORT_SYMBOL(dma_supported); Same panic happened with Intel ixgbe driver also. SR-IOV code looks for arch specific data while enabling VFs. When VF device is added, driver probe function makes set of calls to initialize the pci device. Because the VF device is added different way than the normal PF device(which happens via of_create_pci_dev for sparc), some of the arch specific initialization does not happen for VF device. That causes panic when archdata is accessed. To fix this, I have used already defined weak function pcibios_setup_device to copy archdata from PF to VF. Also verified the fix. Signed-off-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc64: Fix sparc64_set_context stack handling.David S. Miller
[ Upstream commit 397d1533b6cce0ccb5379542e2e6d079f6936c46 ] Like a signal return, we should use synchronize_user_stack() rather than flush_user_windows(). Reported-by: Ilya Malakhov <ilmalakhovthefirst@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc64: Fix numa node distance initializationNitin Gupta
[ Upstream commit 36beca6571c941b28b0798667608239731f9bc3a ] Orabug: 22495713 Currently, NUMA node distance matrix is initialized only when a machine descriptor (MD) exists. However, sun4u machines (e.g. Sun Blade 2500) do not have an MD and thus distance values were left uninitialized. The initialization is now moved such that it happens on both sun4u and sun4v. Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Tested-by: Mikael Pettersson <mikpelinux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc64: Fix bootup regressions on some Kconfig combinations.David S. Miller
[ Upstream commit 49fa5230462f9f2c4e97c81356473a6bdf06c422 ] The system call tracing bug fix mentioned in the Fixes tag below increased the amount of assembler code in the sequence of assembler files included by head_64.S This caused to total set of code to exceed 0x4000 bytes in size, which overflows the expression in head_64.S that works to place swapper_tsb at address 0x408000. When this is violated, the TSB is not properly aligned, and also the trap table is not aligned properly either. All of this together results in failed boots. So, do two things: 1) Simplify some code by using ba,a instead of ba/nop to get those bytes back. 2) Add a linker script assertion to make sure that if this happens again the build will fail. Fixes: 1a40b95374f6 ("sparc: Fix system call tracing register handling.") Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Joerg Abraham <joerg.abraham@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24sparc: Fix system call tracing register handling.Mike Frysinger
[ Upstream commit 1a40b95374f680625318ab61d81958e949e0afe3 ] A system call trace trigger on entry allows the tracing process to inspect and potentially change the traced process's registers. Account for that by reloading the %g1 (syscall number) and %i0-%i5 (syscall argument) values. We need to be careful to revalidate the range of %g1, and reload the system call table entry it corresponds to into %l7. Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24x86/entry/traps: Don't force in_interrupt() to return true in IST handlersAndy Lutomirski
commit aaee8c3c5cce2d9107310dd9f3026b4f901d441c upstream. Forcing in_interrupt() to return true if we're not in a bona fide interrupt confuses the softirq code. This fixes warnings like: NOHZ: local_softirq_pending 282 ... which can happen when running things like selftests/x86. This will change perf's static percpu buffer usage in IST context. I think this is okay, and it's changing the behavior to match historical (pre-4.0) behavior. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 959274753857 ("x86, traps: Track entry into and exit from IST context") Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 09:15:15 +0000