Age | Commit message (Collapse) | Author |
|
Restore the AP/modem handshaking functions and clean up the null
phy driver.
Bug 996035
Signed-off-by: Steve Lin <stlin@nvidia.com>
Reviewed-on: http://git-master/r/109044
(cherry picked from commit ff27e8a48a53fe70949d95915f62dd2e03c73df7)
Change-Id: I12a2401a7fcc540a657ab15378d440ef85561001
Reviewed-on: http://git-master/r/110145
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Steve Lin <stlin@nvidia.com>
Reviewed-by: Steve Lin <stlin@nvidia.com>
|
|
Enabling ALS and Proximity sensor ISL29028 for Tegra3 boards in L4T
defconfig. Also, Disabling the ISL sensors which are not present on
Tegra3 boards.
Bug 876339
Change-Id: I22c318a43b0c5fe667e89c9dd9f99c84a368c8f9
Reviewed-on: http://git-master/r/110065
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Enables the Active State Power Management (ASPM) support
in the PCIe framework
Bug 815499
Change-Id: I76f9fc6a5b6feed8e47e5a4a3825b71c487b79ed
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-on: http://git-master/r/109747
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
rfkill-gpio driver is available in linux delivery as a generic rfkill driver.
use rfkill-gpio driver to perform bluetooth RFKILL gpio activities, instead of
bcm4329 rfkill driver.
Bug 993990
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Change-Id: I654b93f099431029177913605d15ad921df07833
Reviewed-on: http://git-master/r/108499
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Bug 815499
Change-Id: I6ce9a2bb4afbfd797fc5a0bf0d1027bdc0c1459d
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-on: http://git-master/r/109745
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Initialize a variable to avoid a compiler warning and a potential bug.
Bug 999222
Change-Id: I77724b21d20049340943856c8d00af5e067c206a
Signed-off-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-on: http://git-master/r/109552
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Stefan Becker <stefanb@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
Based on the kernel command line argument, this change will register the
UARTD for the tegra_uart driver, instead of the serial8250. Hence we can
put the harmony for the UART automation test.
Bug 991545
Change-Id: I5e637c73f4ce352fb615453121d14e2874e51a53
Signed-off-by: Ramalingam C <ramalingamc@nvidia.com>
Reviewed-on: http://git-master/r/106755
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mursalin Akon <makon@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
It fixes the issue where cpu governor change
was inconsistent across platforms.
In T2x, AUTO HOTPLUG is disabled therefore we need
to store/restore gov for all online cpus across
LP0 cycle.
In T3x, AUTO HOTPLUG is enabled therefore storing/restoring
gov for Cpu0 across LP0 cycle. Cpu0 remains online in suspend
and resume.
bug 991081
Change-Id: I167654aa21e4832b3fdc40e3d388a4d3f984632b
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Reviewed-on: http://git-master/r/105404
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Fix error checking of predicted voltage. Also get rid of
maybe-uninitialized warning when using 4.6 toolchain.
Bug 949219
Bug 999222
Change-Id: I47553aba5a93c91bdd93cbf75081d69f92aec4dd
Signed-off-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-on: http://git-master/r/108899
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
promotion_build
|
|
Bug 997101
Signed-off-by: Om Prakash Singh <omp@nvidia.com>
Change-Id: I5da0bfe342193d93e021eb9a24aacb09bf38e6a0
Reviewed-on: http://git-master/r/108780
Reviewed-by: Om Prakash Singh <omp@nvidia.com>
Tested-by: Om Prakash Singh <omp@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rakesh Kumar <krakesh@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Disable all interrupts on current CPU
while doing 2ls to make sure the 3 us
delay being executed precisely
bug 944998
Change-Id: I645709ffdd2481a63223272e1b3f7f1f78466236
Reviewed-on: http://git-master/r/108536
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
|
|
Remove L3 state from xmm power driver. New usb phy code
allows pm state transition L0->L2 and L2->L0. When the
system goes in LP0/LP1 suspend then the modem power
state is kept at L2 and bus state in suspend controlled by
PMC. At system resume the hsic bus is given back to USB.
Bug 991709
Change-Id: Ib3b74d7da30a5103eddd747726ac7c4423472c76
Signed-off-by: Vinayak Pane <vpane@nvidia.com>
Reviewed-on: http://git-master/r/108076
Reviewed-by: Michael Hsu <mhsu@nvidia.com>
Reviewed-by: Steve Lin <stlin@nvidia.com>
|
|
Bug 999876
Change-Id: I174d6d7495454f4b28f0315513d6f703743f832d
Signed-off-by: Om Prakash Singh <omp@nvidia.com>
|
|
Bug 999876
Change-Id: I174d6d7495454f4b28f0315513d6f703743f832d
Signed-off-by: Om Prakash Singh <omp@nvidia.com>
|
|
Move the device structures to the driver source code files. Register
all nvhost_device's in one loop which is called from board file.
host1x driver code is moved to live under host1x, too. This causes
a need to add host to include path of tegradc and nvavp.
Bug 982965
Change-Id: If99cf9d1ef6bc24663ee8294c19370429ed04ca7
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/104076
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Allow pll_m to reach 900MHz at 1V on T30, T33, T37
rev A02+ SKUs.
Bug 891320
Change-Id: Idbfb10014ae2a1d06abc3bc1d0bed59c583fac98
Signed-off-by: Graziano Misuraca <gmisuraca@nvidia.com>
Reviewed-on: http://git-master/r/103453
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Change dvfs table to allow emc to hit 450MHz at 1V VDD_CORE.
Line in emc table is also used for T30/T30s but because
those can't reach 1350mV they should never use a 450MHz
bct and therefore jump from 400@1V to 800@1.2V as before.
Bug 973238
Change-Id: I4f1f96c959658e6f9aeca8841c2bfa86fe20cfb8
Signed-off-by: Graziano Misuraca <gmisuraca@nvidia.com>
Reviewed-on: http://git-master/r/101868
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Updated 0.95V entries in Tegra3 dvfs tables for nand, nor, spi, and
pwm clocks with recent characterization results. Removed usb, pcie,
and spdif dvfs since characterization allows running these interfaces
in the entire supported voltage range.
Bug 817679
Bug 841336
Change-Id: Iaaa2a3ff8b3c07915f1cb05e7b14da545428888e
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/107779
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Wen Yi <wyi@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
Updated 0.95V entries in Tegra3 dvfs tables for display and dsi
with recent characterization results. Removed hdmi and crt dvfs
since characterization allows running these modules at max rate
in the entire supported voltage range.
Bug 817679
Bug 841336
Change-Id: I28651a692e30a20536613460ea0e45155a530af7
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/107778
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Wen Yi <wyi@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
Updated 0.95V entries in Tegra3 dvfs tables for sclk and cbus clocks
with recent characterization results.
Bug 817679
Bug 841336
Change-Id: I892690aea4c584b34be5dbfcbcd8b35abd86a997
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/107777
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Wen Yi <wyi@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
Fixing the port power code for HSIC. During USB driver re-designing,
port power code was incorrectly merged. Fixing the code now.
Bug 889618
Bug 951061
Change-Id: I1b65662ed864343911abaffb58439ca2996543e7
Signed-off-by: Vinod Atyam <vatyam@nvidia.com>
Reviewed-on: http://git-master/r/108302
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
These are the changes for supporting HSIC remote wakeup
and phy-off in auto-suspend.
Bug 889618
Bug 951061
Change-Id: Ifd8144739c5dea49d8019b42b1a608dd13cc29be
Signed-off-by: Vinod Atyam <vatyam@nvidia.com>
Reviewed-on: http://git-master/r/107606
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
- Adding flag to treat warning as error.
- Handling warnings of unused variable, structures and functions,
wrong return type, wrong type comparision.
Bug 949219
Change-Id: I9d02387ce1073c4e46f69d01669285aa3754f1d9
Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-on: http://git-master/r/104968
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Enabling hotplug detection support for baseband
when it is crashed.
Bug 995784
Change-Id: I75b7a3b79fb8f9e7c6d58b14090637f794e38bad
Signed-off-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-on: http://git-master/r/108284
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Alexandre Berdery <aberdery@nvidia.com>
Reviewed-by: Alexandre Berdery <aberdery@nvidia.com>
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
nor frequency was changed inadvertently in a conflict
resolution. Need to revert it back to proper value.
Bug 948478
Change-Id: I8d8f778a58b2df64c8fcbf85c182fe3a888d7c03
Signed-off-by: Bob Johnston <bjohnston@nvidia.com>
Reviewed-on: http://git-master/r/108247
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Bug 990586
Change-Id: I63da2bd0aaae86070718e0d769b8c9555db18547
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/107714
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Register backlight device after tegradc.0 and tegradc.1. This makes
sure turning on/off backlight in correct sequence and eliminates the
flicker during suspending and resuming.
Bug 964626
Change-Id: I16a545b0148faa341b2443c76d9ca4c7eb7f636c
Signed-off-by: Mark Zhang <markz@nvidia.com>
Reviewed-on: http://git-master/r/105611
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Peer Chen <pchen@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Shashank Sharma <shashanks@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Avoid multiple mappings with DMA coherent/writecombine allocator by pre-
allocating the mappings, and removing that memory from the system memory
mapping. (See previous discussions on linux-arm-kernel as to why this
is bad.)
NB1: By default, we preallocate 2MB for DMA coherent, and 2MB for write
combine memory, rather than 1MB for each in case 1MB is not sufficient
for existing platform usage. Platforms have the option of shrinking
this down to 1MB DMA / 1MB WC (or even 2MB DMA / 0MB WC) if they so wish.
The DMA memory must be a multiple of 1MB, the write combine memory must
also be a multiple of 1MB, and the two together must be a multiple of
2MB.
NB2: On ARMv6/7 where we use 'normal uncacheable' memory for both DMA
and WC, the two pools are combined into one, as was the case with the
previous implementation.
The down side to this change is that the memory is permanently set aside
for DMA purposes, but I believe that to be unavoidable if we are to
avoid the possibility of the cache getting in the way on VIPT CPUs.
This removes the last known offender (at this time) from the kernel.
Given that DMA memory is fully coherent by this patch, cache
invalidation/clean is not required and so, we skip cache related
activities for the memory managed by the DMA layer. The bus
address -> virtual address conversion normally used in the calling
path and the fact that we remove kernel static mapping corresponding
to the DMA buffers leads to exceptions otherwise.
bug 876019
bug 965047
bug 987589
Change-Id: I72beb386605aafe1a301494a95a67d094ea6b2e4
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com>
Reviewed-on: http://git-master/r/106212
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
bug 820324
Change-Id: Ia4dec298b3c0cda8cb4e8572b46067b7d06b3758
Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com>
Reviewed-on: http://git-master/r/107592
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Enable WXGA display and touch input for p1852 touch panel.
board-p1852-panel.c:
added WXGA timing for atmel touch panel.
board-p1852.c:
initialize touch panel if touch input is defined.
board-p1852.h:
added p1852 touch panel GPIO and bus.
tegra_p1852_gnu_linux_defconfig:
added touch panel flags, not defined by default.
bug 936232
Change-Id: Ia50b991f6aa5ed0ece458ad3871a68684a9234a6
Signed-off-by: Dongfang Shi <dshi@nvidia.com>
Reviewed-on: http://git-master/r/101348
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Move Raydium touch init declaration from board-specific
board-kai.h to generic board-touch.h
Signed-off-by: Graziano Misuraca <gmisuraca@nvidia.com>
Change-Id: If82572a296ad6e5a3b1733827289e9b71a624176
Reviewed-on: http://git-master/r/95919
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Remove write permission of eack_state for cts verification. The init script
will make it acessible on engineering builds
Bug 906796
Change-Id: I1b5d77f4ee3d0e39106840eca0c53e6347c34ea1
Signed-off-by: Hao Tang <htang@nvidia.com>
Reviewed-on: http://git-master/r/106668
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
Reviewed-by: Raymond Poudrier <rapoudrier@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
|
|
Audio Sync clocks should be set at driver level.
Removing this hack as the TDM driver sets the clocks now.
Bug 948478
Change-Id: Ie001b601e740f22852a4dbb6b89a225a263208ee
Signed-off-by: Nitin Pai <npai@nvidia.com>
Reviewed-on: http://git-master/r/107534
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Manoj Chourasia <mchourasia@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Scott Peterson <speterson@nvidia.com>
|
|
Bug 936337
Bug 899053
Change-Id: I2b3d8cfc8a00881338c1e17d03f2844d15ba7d3e
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/106313
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
tegra_gpio driver supports configuring gpio when direction is set.
So removed tegra_gpio_enable/tegra_gpio_disable from p1852 board
file.
Bug 984442
Change-Id: I176b99fb277e01d0ef426c793ce0d1b3bbbb847d
Signed-off-by: Mohit Kataria <mkataria@nvidia.com>
Reviewed-on: http://git-master/r/105902
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Allow for DSI panel support to be present in release builds.
Removed CONFIG_TEGRA_CARDHU_DSI config variable.
Bug 978305.
Change-Id: I2b34fa5c5331de897d2b753da90e26278a6b7870
Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Reviewed-on: http://git-master/r/106919
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
|
|
Changed USB1_UTMIP_XCVR_CFG0_0 register value with values
provided by sys-eng
* Implemented algo as described on Bug 974236
* Added variable 'usb_calib_mask' in 'usb platform data' to
make distinction on how many bits to mask in usb_calib_0 fuse
Bug 978870
Bug 972436
Change-Id: I71f27b0cf5ffe33a9896238b01c52650ca632352
Signed-off-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-on: http://git-master/r/103308
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
This is not merged properly reverting the change.
This reverts commit 3b080222a7b37c31fe73be90c3e681096f8b82dd.
Change-Id: Icb07c67bdff69a41685f7f8b038cf38306566789
Reviewed-on: http://git-master/r/107001
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
bug 947300
Change-Id: I22200b5f3657d08d59d202cb6c5c3cf551c18026
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/106984
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
bug 947300
Change-Id: I1f696030adbdc79d08b30783565d9b195f9e2891
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/106981
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
* NVC framework provides NVC_CFG_NODEV config for all
NVC compliant camera drivers to make sure to delete
the device nodes which are not found in I2C probing.
This config is not set for all focuser modules on PM269,
which introduces the issue.
* Earlier only sh532u focuser was suppose to be on
cardhu, hence this error condition did not get triggered
but newly added focuser has exposed this error.
* Set NVC_CFG_NODEV for both sh532u and ad5816 focusers.
* Add regulator supply for cam2 ad5816 focuser, it fixes
camera crash on first reboot on E1198 cardhu and I2C
warnings.
Bug 992611
Bug 995072
Change-Id: I3382a896e4e246a0a323bd13ae0889b6701351c7
Signed-off-by: Sudhir vyas <svyas@nvidia.com>
Reviewed-on: http://git-master/r/106960
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Prayas Mohanty <pmohanty@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Frank Chen <frankc@nvidia.com>
|
|
Removing tegra_gpio_enable and disable calls
from board files as they are supported through
set direction calls in the driver
Bug 984439
Change-Id: I011fc1ec52b31b1b0602d577f02a6d20f37e402d
Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com>
Reviewed-on: http://git-master/r/102773
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
When doing LP to G transition, it had a power up latency on VDD_CPU
rail. To reduce the latency, CPU_LP can trun on the VDD_CPU rail
before the LP to G transition.
Bug 930985
Change-Id: I087e185ea5aa90f309b8cafba9bc4bb7d3fc950c
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Reviewed-on: http://git-master/r/93141
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Antti Miettinen <amiettinen@nvidia.com>
Tested-by: Antti Miettinen <amiettinen@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
On Tegra3 added mechanism to alter dvfs table between single and
multiple CPU cores. This mechanism is dormant since no single-core
table is available yet.
Change-Id: I63bd513bd5fd7347f64c88f46974cf7fac55c419
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/105508
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Extended EDP processing of cpu up/down events with calls to alter CPU
dvfs table. This is in addition to already supported changing of CPU
dvfs on EDP thermal event. For now, added calls do not actually alter
the table.
Change-Id: I1cbf2c54eeca8dea1e7b6f4c65d8dbaf563a980e
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/104883
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Removed alternative frequencies table from dvfs structure, and
replaced it with table pointer to facilitate future support for
multiple alternative tables. Actually supported alternative dvfs
table (Tegra3 CPU cold zone table) is not changed.
Change-Id: Ia8c1d1f2dd450f0e48685e769ca925b8e6f5b57b
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/104882
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Bug 974153
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Change-Id: I294a93eca0b395c8c2639a7d6a2d29c54447ae37
Reviewed-on: http://git-master/r/105215
Tested-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-by: Bo Yan <byan@nvidia.com>
Reviewed-by: Vinod Rex <vrex@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
|
|
Change-Id: Id7427bab50c6e285efe76afa234435bc984fc011
Signed-off-by: Sai Charan Gurrappadi <sgurrappadi@nvidia.com>
Reviewed-on: http://git-master/r/105274
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|