summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-03-07Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "arm64 and generic kernel/module.c (acked by Rusty) fixes for CONFIG_DEBUG_SET_MODULE_RONX" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: kernel/module.c: Update debug alignment after symtable generation arm64: Don't use is_module_addr in setting page attributes
2015-03-06Merge tag 'pm+acpi-4.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes for recent regressions (ACPI resources management, suspend-to-idle), stable-candidate fixes (ACPI backlight), fixes related to the wakeup IRQ management changes made in v3.18, other fixes (suspend-to-idle, cpufreq ppc driver) and a couple of cleanups (suspend-to-idle, generic power domains, ACPI backlight). Specifics: - Fix ACPI resources management problems introduced by the recent rework of the code in question (Jiang Liu) and a build issue introduced by those changes (Joachim Nilsson). - Fix a recent suspend-to-idle regression on systems where entering idle states causes local timers to stop, prevent suspend-to-idle from crashing in restricted configurations (no cpuidle driver, cpuidle disabled etc.) and clean up the idle loop somewhat while at it (Rafael J Wysocki). - Fix build problem in the cpufreq ppc driver (Geert Uytterhoeven). - Allow the ACPI backlight driver module to be loaded if ACPI is disabled which helps the i915 driver in those configurations (stable-candidate) and change the code to help debug unusual use cases (Chris Wilson). - Wakeup IRQ management changes in v3.18 caused some drivers on the at91 platform to trigger a warning from the IRQ core related to an unexpected combination of interrupt action handler flags. However, on at91 a timer IRQ is shared with some other devices (including system wakeup ones) and that leads to the unusual combination of flags in question. To make it possible to avoid the warning introduce a new interrupt action handler flag (which can be used by drivers to indicate the special case to the core) and rework the problematic at91 drivers to use it and work as expected during system suspend/resume. From Boris Brezillon, Rafael J Wysocki and Mark Rutland. - Clean up the generic power domains subsystem's debugfs interface (Kevin Hilman)" * tag 'pm+acpi-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: genirq / PM: describe IRQF_COND_SUSPEND tty: serial: atmel: rework interrupt and wakeup handling watchdog: at91sam9: request the irq with IRQF_NO_SUSPEND cpuidle / sleep: Use broadcast timer for states that stop local timer clk: at91: implement suspend/resume for the PMC irqchip rtc: at91rm9200: rework wakeup and interrupt handling rtc: at91sam9: rework wakeup and interrupt handling PM / wakeup: export pm_system_wakeup symbol genirq / PM: Add flag for shared NO_SUSPEND interrupt lines ACPI / video: Propagate the error code for acpi_video_register ACPI / video: Load the module even if ACPI is disabled PM / Domains: cleanup: rename gpd -> genpd in debugfs interface cpufreq: ppc: Add missing #include <asm/smp.h> x86/PCI/ACPI: Relax ACPI resource descriptor checks to work around BIOS bugs x86/PCI/ACPI: Ignore resources consumed by host bridge itself cpuidle: Clean up fallback handling in cpuidle_idle_call() cpuidle / sleep: Do sanity checks in cpuidle_enter_freeze() too idle / sleep: Avoid excessive disabling and enabling interrupts PCI: versatile: Update for list_for_each_entry() API change genirq / PM: better describe IRQF_NO_SUSPEND semantics
2015-03-06arm64: Don't use is_module_addr in setting page attributesLaura Abbott
The set_memory_* functions currently only support module addresses. The addresses are validated using is_module_addr. That function is special though and relies on internal state in the module subsystem to work properly. At the time of module initialization and calling set_memory_*, it's too early for is_module_addr to work properly so it always returns false. Rather than be subject to the whims of the module state, just bounds check against the module virtual address range. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-03-05Merge branch 'acpi-resources'Rafael J. Wysocki
* acpi-resources: x86/PCI/ACPI: Relax ACPI resource descriptor checks to work around BIOS bugs x86/PCI/ACPI: Ignore resources consumed by host bridge itself PCI: versatile: Update for list_for_each_entry() API change
2015-03-05Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: EFI fixes, an Intel Quark fix, an asm fix and an FPU handling fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xsaves: Fix improper uses of __ex_table x86/intel/quark: Select COMMON_CLK x86/asm/entry/64: Remove a bogus 'ret_from_fork' optimization firmware: dmi_scan: Fix dmi_len type efi/libstub: Fix boundary checking in efi_high_alloc() firmware: dmi_scan: Fix dmi scan to handle "End of Table" structure
2015-03-05x86/fpu/xsaves: Fix improper uses of __ex_tableQuentin Casasnovas
Commit: f31a9f7c7169 ("x86/xsaves: Use xsaves/xrstors to save and restore xsave area") introduced alternative instructions for XSAVES/XRSTORS and commit: adb9d526e982 ("x86/xsaves: Add xsaves and xrstors support for booting time") added support for the XSAVES/XRSTORS instructions at boot time. Unfortunately both failed to properly protect them against faulting: The 'xstate_fault' macro will use the closest label named '1' backward and that ends up in the .altinstr_replacement section rather than in .text. This means that the kernel will never find in the __ex_table the .text address where this instruction might fault, leading to serious problems if userspace manages to trigger the fault. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Jamie Iles <jamie.iles@oracle.com> [ Improved the changelog, fixed some whitespace noise. ] Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Allan Xavier <mr.a.xavier@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: adb9d526e982 ("x86/xsaves: Add xsaves and xrstors support for booting time") Fixes: f31a9f7c7169 ("x86/xsaves: Use xsaves/xrstors to save and restore xsave area") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-05x86/intel/quark: Select COMMON_CLKAndy Shevchenko
The commit 8bbc2a135b63 ("x86/intel/quark: Add Intel Quark platform support") introduced a minimal support of Intel Quark SoC. That allows to use core parts of the SoC. However, the SPI, I2C, and GPIO drivers can't be selected by kernel configuration because they depend on COMMON_CLK. The patch adds a COMMON_CLK selection to the platfrom definition to allow user choose the drivers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ong, Boon Leong <boon.leong.ong@intel.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Darren Hart <dvhart@linux.intel.com> Fixes: 8bbc2a135b63 ("x86/intel/quark: Add Intel Quark platform support") Link: http://lkml.kernel.org/r/1425569044-2867-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-05x86/asm/entry/64: Remove a bogus 'ret_from_fork' optimizationAndy Lutomirski
'ret_from_fork' checks TIF_IA32 to determine whether 'pt_regs' and the related state make sense for 'ret_from_sys_call'. This is entirely the wrong check. TS_COMPAT would make a little more sense, but there's really no point in keeping this optimization at all. This fixes a return to the wrong user CS if we came from int 0x80 in a 64-bit task. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/4710be56d76ef994ddf59087aad98c000fbab9a4.1424989793.git.luto@amacapital.net [ Backported from tip:x86/asm. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-04Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Marcelo Tosatti: "KVM bug fixes, including a SVM interrupt injection regression fix, MIPS and ARM bug fixes" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MIPS: Enable after disabling interrupt KVM: MIPS: Fix trace event to save PC directly KVM: SVM: fix interrupt injection (apic->isr_count always 0) KVM: emulate: fix CMPXCHG8B on 32-bit hosts KVM: VMX: fix build without CONFIG_SMP arm/arm64: KVM: Add exit reaons to kvm_exit event tracing ARM: KVM: Fix size check in __coherent_cache_guest_page
2015-03-04Merge tag 'arc-4.0-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Fix for /proc/<pid>/maps "stack" vma annotation - sched stats not printing correct sleeping task PC - perf not reporting page faults * tag 'arc-4.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Fix thread_saved_pc() ARC: Fix KSTK_ESP() ARC: perf: Enable generic software events ARC: Make arc_unwind_core accessible externally
2015-03-04Merge tag 'powerpc-4.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - Fix for dynticks. - Fix for smpboot bug. - Fix for IOMMU group refcounting. * tag 'powerpc-4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/iommu: Remove IOMMU device references via bus notifier powerpc/smp: Wait until secondaries are active & online powerpc: Re-enable dynticks
2015-03-04x86/PCI/ACPI: Ignore resources consumed by host bridge itselfJiang Liu
When parsing resources for PCI host bridge, we should ignore resources consumed by host bridge itself and only report window resources available to child PCI busses. Fixes: 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-04powerpc/iommu: Remove IOMMU device references via bus notifierNishanth Aravamudan
After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the refcnt on the kobject backing the IOMMU group for a PCI device is elevated by each call to pci_dma_dev_setup_pSeriesLP() (via set_iommu_table_base_and_group). When we go to dlpar a multi-function PCI device out: iommu_reconfig_notifier -> iommu_free_table -> iommu_group_put BUG_ON(tbl->it_group) We trip this BUG_ON, because there are still references on the table, so it is not freed. Fix this by moving the powernv bus notifier to common code and calling it for both powernv and pseries. Fixes: d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier") Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Tested-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-04powerpc/smp: Wait until secondaries are active & onlineMichael Ellerman
Anton has a busy ppc64le KVM box where guests sometimes hit the infamous "kernel BUG at kernel/smpboot.c:134!" issue during boot: BUG_ON(td->cpu != smp_processor_id()); Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops output confirms it: CPU: 0 Comm: watchdog/130 The problem is that we aren't ensuring the CPU active bit is set for the secondary before allowing the master to continue on. The master unparks the secondary CPU's kthreads and the scheduler looks for a CPU to run on. It calls select_task_rq() and realises the suggested CPU is not in the cpus_allowed mask. It then ends up in select_fallback_rq(), and since the active bit isnt't set we choose some other CPU to run on. This seems to have been introduced by 6acbfb96976f "sched: Fix hotplug vs. set_cpus_allowed_ptr()", which changed from setting active before online to setting active after online. However that was in turn fixing a bug where other code assumed an active CPU was also online, so we can't just revert that fix. The simplest fix is just to spin waiting for both active & online to be set. We already have a barrier prior to set_cpu_online() (which also sets active), to ensure all other setup is completed before online & active are set. Fixes: 6acbfb96976f ("sched: Fix hotplug vs. set_cpus_allowed_ptr()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) If an IPVS tunnel is created with a mixed-family destination address, it cannot be removed. Fix from Alexey Andriyanov. 2) Fix module refcount underflow in netfilter's nft_compat, from Pablo Neira Ayuso. 3) Generic statistics infrastructure can reference variables sitting on a released function stack, therefore use dynamic allocation always. Fix from Ignacy Gawędzki. 4) skb_copy_bits() return value test is inverted in ip_check_defrag(). 5) Fix network namespace exit in openvswitch, we have to release all of the per-net vports. From Pravin B Shelar. 6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter. 7) Fix rhashtable grow/shrink behavior, only expand during inserts and shrink during deletes. From Daniel Borkmann. 8) Netdevice names with semicolons should never be allowed, because they serve as a separator. From Matthew Thode. 9) Use {,__}set_current_state() where appropriate, from Fabian Frederick. 10) Revert byte queue limits support in r8169 driver, it's causing regressions we can't figure out. 11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to measure packets in flight, properly use tcp_packets_in_flight() instead. From Neal Cardwell. 12) Fix accidental removal of support for bluetooth in CSR based Intel wireless cards. From Marcel Holtmann. 13) We accidently added a behavioral change between native and compat tasks, wrt testing the MSG_CMSG_COMPAT bit. Just ignore it if the user happened to set it in a native binary as that was always the behavior we had. From Catalin Marinas. 14) Check genlmsg_unicast() return valud in hwsim netlink tx frame handling, from Bob Copeland. 15) Fix stale ->radar_required setting in mac80211 that can prevent starting new scans, from Eliad Peller. 16) Fix memory leak in nl80211 monitor, from Johannes Berg. 17) Fix race in TX index handling in xen-netback, from David Vrabel. 18) Don't enable interrupts in amx-xgbe driver until all software et al. state is ready for the interrupt handler to run. From Thomas Lendacky. 19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric W Biederman. 20) The amount of header space needed in macvtap was not calculated properly, fix it otherwise we splat past the beginning of the packet. From Eric Dumazet. 21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin. 22) Don't raw initialize or mod timers, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 23) Fix software maintained statistics in bcmgenet and systemport drivers, from Florian Fainelli. 24) DMA descriptor updates in sh_eth need proper memory barriers, from Ben Hutchings. 25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal Kubecek. 26) Openvswitch's non-masked set actions aren't constructed properly into netlink messages, fix from Joe Stringer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) openvswitch: Fix serialization of non-masked set actions. gianfar: Reduce logging noise seen due to phy polling if link is down ibmveth: Add function to enable live MAC address changes net: bridge: add compile-time assert for cb struct size udp: only allow UFO for packets from SOCK_DGRAM sockets sh_eth: Really fix padding of short frames on TX Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" sh_eth: Fix RX recovery on R-Car in case of RX ring underrun sh_eth: Ensure proper ordering of descriptor active bit write/read net/mlx4_en: Disbale GRO for incoming loopback/selftest packets net/mlx4_core: Fix wrong mask and error flow for the update-qp command net: systemport: fix software maintained statistics net: bcmgenet: fix software maintained statistics rxrpc: don't multiply with HZ twice rxrpc: terminate retrans loop when sending of skb fails net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface. net: pasemi: Use setup_timer and mod_timer net: stmmac: Use setup_timer and mod_timer net: 8390: axnet_cs: Use setup_timer and mod_timer net: 8390: pcnet_cs: Use setup_timer and mod_timer ...
2015-03-02KVM: MIPS: Enable after disabling interruptTapasweni Pathak
Enable disabled interrupt, on unsuccessful operation. Found by Coccinelle. Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-02KVM: MIPS: Fix trace event to save PC directlyJames Hogan
Currently the guest exit trace event saves the VCPU pointer to the structure, and the guest PC is retrieved by dereferencing it when the event is printed rather than directly from the trace record. This isn't safe as the printing may occur long afterwards, after the PC has changed and potentially after the VCPU has been freed. Usually this results in the same (wrong) PC being printed for multiple trace events. It also isn't portable as userland has no way to access the VCPU data structure when interpreting the trace record itself. Lets save the actual PC in the structure so that the correct value is accessible later. Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # v3.10+ Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-02KVM: SVM: fix interrupt injection (apic->isr_count always 0)Radim Krčmář
In commit b4eef9b36db4, we started to use hwapic_isr_update() != NULL instead of kvm_apic_vid_enabled(vcpu->kvm). This didn't work because SVM had it defined and "apicv" path in apic_{set,clear}_isr() does not change apic->isr_count, because it should always be 1. The initial value of apic->isr_count was based on kvm_apic_vid_enabled(vcpu->kvm), which is always 0 for SVM, so KVM could have injected interrupts when it shouldn't. Fix it by implicitly setting SVM's hwapic_isr_update to NULL and make the initial isr_count depend on hwapic_isr_update() for good measure. Fixes: b4eef9b36db4 ("kvm: x86: vmx: NULL out hwapic_isr_update() in case of !enable_apicv") Reported-and-tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-02Merge tag 'metag-fixes-v4.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull arch/metag fix from James Hogan: "This is just a single patch to fix the KSTK_EIP() and KSTK_ESP() macros for metag which have always been erronously returning the PC and stack pointer of the task's kernel context rather than from its user context saved at entry from userland into the kernel, which affects the contents of /proc/<pid>/maps and /proc/<pid>/stat" * tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: Fix KSTK_EIP() and KSTK_ESP() macros
2015-03-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A CR4-shadow 32-bit init fix, plus two typo fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs too x86/platform/intel-mid: Fix trivial printk message typo in intel_mid_arch_setup() x86/cpu/intel: Fix trivial typo in intel_tlb_table[]
2015-03-01Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three clockevents/clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: pxa: Fix section mismatch clocksource: mtk: Fix race conditions in probe code clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig
2015-03-01Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two kprobes fixes and a handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Make sparc64 arch point to sparc perf symbols: Define EM_AARCH64 for older OSes perf top: Fix SIGBUS on sparc64 perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flag perf tools: Fix pthread_attr_setaffinity_np build error perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature check perf bench: Fix order of arguments to memcpy_alloc_mem kprobes/x86: Check for invalid ftrace location in __recover_probed_insn() kprobes/x86: Use 5-byte NOP when the code might be modified by ftrace
2015-02-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: add missing __PAGETABLE_{PUD,PMD}_FOLDED defines mm: page_alloc: revert inadvertent !__GFP_FS retry behavior change kernel/sys.c: fix UNAME26 for 4.0 mm: memcontrol: use "max" instead of "infinity" in control knobs zram: use proper type to update max_used_pages drivers/rtc/rtc-ds1685.c: fix conditional in ds1685_rtc_sysfs_time_regs_{show,store} nilfs2: fix potential memory overrun on inode scripts/gdb: add empty package initialization script rtc: ds1685: remove superfluous checks for out-of-range u8 values rtc: ds1685: fix ds1685_rtc_alarm_irq_enable build error memcg: fix low limit calculation mm/nommu: fix memory leak ocfs2: update web page + git tree in documentation
2015-02-28mm: add missing __PAGETABLE_{PUD,PMD}_FOLDED definesKirill A. Shutemov
Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Usually, these defines are provided by <asm-generic/pgtable-nopmd.h> and <asm-generic/pgtable-nopud.h>. But some architectures fold page table levels in a custom way. They need to define these macros themself. This patch adds missing defines. The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc() and __pud_alloc() on architectures without these page table levels. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28net: smc91x: use run-time configuration on all ARM machinesArnd Bergmann
The smc91x driver traditionally gets configured at compile-time for whichever hardware it runs on. This no longer works on ARM as we continue to move to building all-in-one kernels. Most ARM configurations with this driver already use run-time configuration through DT or through platform_data, but a few have not been converted yet. I've checked all ARM boards that use this driver in their legacy board files, and converted the ones that were using compile-time configuration in smc91x.h to behave like the other ones and provide the interrupt polarity along with the MMIO configuration (width, stride) at platform device creation time. In particular, these combinations were previously selectable in Kconfig but in fact broken: - sa1100 assabet plus pleb - msm combined with any other armv6/v7 platform - pxa-idp combined with any non-DMA pxa variant - LogicPD PXA270 combined with any other pxa - nomadik combined with any other armv4/v5 platform, e.g. versatile. None of these seem critical enough to warrant a backport to stable, but it would be nice to clean this up for good. Signed-off-by: Arnd Bergmann <arnd@arndb.de> ---- I would like the patch to get merged through netdev, after Robert and/or Linus have verified it on at least some hardware. There are a few other non-ARM platforms using this driver, I could do the same patch for those if we want to take it further. arch/arm/mach-msm/board-halibut.c | 8 ++++- arch/arm/mach-msm/board-qsd8x50.c | 8 ++++- arch/arm/mach-pxa/idp.c | 5 +++ arch/arm/mach-pxa/lpd270.c | 8 ++++- arch/arm/mach-realview/core.c | 7 ++++ arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-sa1100/neponset.c | 6 ++++ arch/arm/mach-sa1100/pleb.c | 7 ++++ drivers/net/ethernet/smsc/smc91x.c | 9 +++-- drivers/net/ethernet/smsc/smc91x.h | 114 ++---------------------------------------------------------- 10 files changed, 57 insertions(+), 117 deletions(-) Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs tooSteven Rostedt
Commit: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4") added a shadow CR4 such that reads and writes that do not modify the CR4 execute much faster than always reading the register itself. The change modified cpu_init() in common.c, so that the shadow CR4 gets initialized before anything uses it. Unfortunately, there's two cpu_init()s in common.c. There's one for 64-bit and one for 32-bit. The commit only added the shadow init to the 64-bit path, but the 32-bit path needs the init too. Link: http://lkml.kernel.org/r/20150227125208.71c36402@gandalf.local.home Fixes: 1e02ce4cccdc "x86: Store a per-cpu shadow copy of CR4" Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150227145019.2bdd4354@gandalf.local.home Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-28Merge branch 'linus' into x86/urgent, to merge dependent patchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-27Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "The arm-soc bug fixes this time around are mostly for the omap platform, coming from a pull request from Tony Lindgren and are almost entirely fixing dts files. The other two changes enable support for the shmobile platform in generic armv7 kernels and change some properties in the ARM64 reference board dts files" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: Enable shmobile platforms arm64: Add L2 cache topology to ARM Ltd boards/models ARM: dts: am335x-bone*: usb0 is hardwired for peripheral ARM: dts: dra7x-evm: beagle-x15: Fix USB Host ARM: omap2plus_defconfig: Fix SATA boot ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver ARM: dts: dra7: Correct the dma controller's property names ARM: dts: omap5: Correct the dma controller's property names ARM: dts: omap4: Correct the dma controller's property names ARM: dts: omap3: Correct the dma controller's property names ARM: dts: omap2: Correct the dma controller's property names ARM: dts: am437x-idk: fix sleep pinctrl state ARM: omap2plus_defconfig: enable TPS62362 regulator ARM: dts: am437x-idk: fix TPS62362 i2c bus ARM: dts: n900: Fix offset for smc91x ethernet ARM: dts: n900: fix i2c bus numbering ARM: dts: Fix USB dts configuration for dm816x ARM: dts: OMAP5: Fix SATA PHY node ARM: dts: DRA7: Fix SATA PHY node
2015-02-27Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Various arm64 fixes: - ftrace branch generation fix - branch instruction encoding fix - include files, guards and unused prototypes clean-up - minor VDSO ABI fix (clock_getres) - PSCI functions moved to .S to avoid compilation error with gcc 5 - pte_modify fix to not ignore the mapping type - crypto: AES interleaved increased to 4x (for performance reasons) - text patching fix for modules - swiotlb increased back to 64MB - copy_siginfo_to_user32() fix for big endian" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpuidle: add asm/proc-fns.h inclusion arm64: compat Fix siginfo_t -> compat_siginfo_t conversion on big endian arm64: Increase the swiotlb buffer size 64MB arm64: Fix text patching logic when using fixmap arm64: crypto: increase AES interleave to 4x arm64: enable PTE type bit in the mask for pte_modify arm64: mm: remove unused functions and variable protoypes arm64: psci: move psci firmware calls out of line arm64: vdso: minor ABI fix for clock_getres arm64: guard asm/assembler.h against multiple inclusions arm64: insn: fix compare-and-branch encodings arm64: ftrace: fix ftrace_modify_graph_caller for branch replace
2015-02-27arm64: cpuidle: add asm/proc-fns.h inclusionLorenzo Pieralisi
ARM64 CPUidle driver requires the cpu_do_idle function so that it can be used to enter the shallowest idle state, and it is declared in asm/proc-fns.h. The current ARM64 CPUidle driver does not include asm/proc-fns.h explicitly and it has so far relied on implicit inclusion from other header files. Owing to some header dependencies reshuffling this currently triggers build failures when CONFIG_ARM64_64K_PAGES=y: drivers/cpuidle/cpuidle-arm64.c: In function "arm64_enter_idle_state" drivers/cpuidle/cpuidle-arm64.c:42:3: error: implicit declaration of function "cpu_do_idle" [-Werror=implicit-function-declaration] cpu_do_idle(); ^ This patch adds the explicit inclusion of the asm/proc-fns.h header file in the arm64 asm/cpuidle.h header file, so that the build breakage is fixed and the required header inclusion is added to the appropriate arch back-end CPUidle header, already included by the CPUidle arm64 driver, where CPUidle arch related function declarations belong. Reported-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-27arm64: compat Fix siginfo_t -> compat_siginfo_t conversion on big endianCatalin Marinas
The native (64-bit) sigval_t union contains sival_int (32-bit) and sival_ptr (64-bit). When a compat application invokes a syscall that takes a sigval_t value (as part of a larger structure, e.g. compat_sys_mq_notify, compat_sys_timer_create), the compat_sigval_t union is converted to the native sigval_t with sival_int overlapping with either the least or the most significant half of sival_ptr, depending on endianness. When the corresponding signal is delivered to a compat application, on big endian the current (compat_uptr_t)sival_ptr cast always returns 0 since sival_int corresponds to the top part of sival_ptr. This patch fixes copy_siginfo_to_user32() so that sival_int is copied to the compat_siginfo_t structure. Cc: <stable@vger.kernel.org> Reported-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com> Tested-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-27arm64: Increase the swiotlb buffer size 64MBCatalin Marinas
With commit 3690951fc6d4 (arm64: Use swiotlb late initialisation), the swiotlb buffer size is limited to MAX_ORDER_NR_PAGES. However, there are platforms with 32-bit only devices that require bounce buffering via swiotlb. This patch changes the swiotlb initialisation to an early 64MB memblock allocation. In order to get the swiotlb buffer correctly allocated (via memblock_virt_alloc_low_nopanic), this patch also defines ARCH_LOW_ADDRESS_LIMIT to the maximum physical address capable of 32-bit DMA. Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-27ARC: Fix thread_saved_pc()Vineet Gupta
The old implementation assumed that SP at the time of __switch_to() is right above pt_regs which is almost certainly not the case as there will be some stack build up between entry into kernel and leading up to __switch_to Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-27ARC: Fix KSTK_ESP()Vineet Gupta
/proc/<pid>/maps currently don't annotate stack vma with "[stack]" This is because KSTK_ESP ie expected to return usermode SP of tsk while currently it returns the kernel mode SP of a sleeping tsk. While the fix is trivial, we also need to adjust the ARC kernel stack unwinder to not use KSTK_SP and friends any more. Cc: <stable@vger.kernel.org> Reported-and-suggested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-27ARC: perf: Enable generic software eventsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-27ARC: Make arc_unwind_core accessible externallyVineet Gupta
The arc unwinder can also be used for perf callchains. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-26arm64: Fix text patching logic when using fixmapMarc Zyngier
Patch 2f896d586610 ("arm64: use fixmap for text patching") changed the way we patch the kernel text, using a fixmap when the kernel or modules are flagged as read only. Unfortunately, a flaw in the logic makes it fall over when patching modules without CONFIG_DEBUG_SET_MODULE_RONX enabled: [...] [ 32.032636] Call trace: [ 32.032716] [<fffffe00003da0dc>] __copy_to_user+0x2c/0x60 [ 32.032837] [<fffffe0000099f08>] __aarch64_insn_write+0x94/0xf8 [ 32.033027] [<fffffe000009a0a0>] aarch64_insn_patch_text_nosync+0x18/0x58 [ 32.033200] [<fffffe000009c3ec>] ftrace_modify_code+0x58/0x84 [ 32.033363] [<fffffe000009c4e4>] ftrace_make_nop+0x3c/0x58 [ 32.033532] [<fffffe0000164420>] ftrace_process_locs+0x3d0/0x5c8 [ 32.033709] [<fffffe00001661cc>] ftrace_module_init+0x28/0x34 [ 32.033882] [<fffffe0000135148>] load_module+0xbb8/0xfc4 [ 32.034044] [<fffffe0000135714>] SyS_finit_module+0x94/0xc4 [...] This is triggered by the use of virt_to_page() on a module address, which ends to pointing to Nowhereland if you're lucky, or corrupt your precious data if not. This patch fixes the logic by mimicking what is done on arm: - If we're patching a module and CONFIG_DEBUG_SET_MODULE_RONX is set, use vmalloc_to_page(). - If we're patching the kernel and CONFIG_DEBUG_RODATA is set, use virt_to_page(). - Otherwise, use the provided address, as we can write to it directly. Tested on 4.0-rc1 as a KVM guest. Reported-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laura Abbott <lauraa@codeaurora.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: crypto: increase AES interleave to 4xArd Biesheuvel
This patch increases the interleave factor for parallel AES modes to 4x. This improves performance on Cortex-A57 by ~35%. This is due to the 3-cycle latency of AES instructions on the A57's relatively deep pipeline (compared to Cortex-A53 where the AES instruction latency is only 2 cycles). At the same time, disable inline expansion of the core AES functions, as the performance benefit of this feature is negligible. Measured on AMD Seattle (using tcrypt.ko mode=500 sec=1): Baseline (2x interleave, inline expansion) ------------------------------------------ testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 95545 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 68496 operations in 1 seconds This patch (4x interleave, no inline expansion) ----------------------------------------------- testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 124735 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 92328 operations in 1 seconds Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: enable PTE type bit in the mask for pte_modifyFeng Kan
Caught during Trinity testing. The pte_modify does not allow modification for PTE type bit. This cause the test to hang the system. It is found that the PTE can't transit from an inaccessible page (b00) to a valid page (b11) because the mask does not allow it. This happens when a big block of mmaped memory is set the PROT_NONE, then the a small piece is broken off and set to PROT_WRITE | PROT_READ cause a huge page split. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: mm: remove unused functions and variable protoypesYingjoe Chen
The functions __cpu_flush_user_tlb_range and __cpu_flush_kern_tlb_range were removed in commit fa48e6f780 'arm64: mm: Optimise tlb flush logic where we have >4K granule'. Global variable cpu_tlb was never used in arm64. Remove them. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: psci: move psci firmware calls out of lineWill Deacon
An arm64 allmodconfig fails to build with GCC 5 due to __asmeq assertions in the PSCI firmware calling code firing due to mcount preambles breaking our assumptions about register allocation of function arguments: /tmp/ccDqJsJ6.s: Assembler messages: /tmp/ccDqJsJ6.s:60: Error: .err encountered /tmp/ccDqJsJ6.s:61: Error: .err encountered /tmp/ccDqJsJ6.s:62: Error: .err encountered /tmp/ccDqJsJ6.s:99: Error: .err encountered /tmp/ccDqJsJ6.s:100: Error: .err encountered /tmp/ccDqJsJ6.s:101: Error: .err encountered This patch fixes the issue by moving the PSCI calls out-of-line into their own assembly files, which are safe from the compiler's meddling fingers. Reported-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: vdso: minor ABI fix for clock_getresNathan Lynch
The vdso implementation of clock_getres currently returns 0 (success) whenever a null timespec is provided by the caller, regardless of the clock id supplied. This behavior is incorrect. It should fall back to syscall when an unrecognized clock id is passed, even when the timespec argument is null. This ensures that clock_getres always returns an error for invalid clock ids. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26ARM: multi_v7_defconfig: Enable shmobile platformsGeert Uytterhoeven
Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-25Merge tag 'fixes-v4.0-rc1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for various omap devices. It's all dts and defconfig changes for this set: - Fix wrong DMA properties for dma to avoid them getting copied wrong again before we start actually using them - USB fixes to revert the extcon changes as the driver did not get merged yet and cause issues - Omap5 and dra7 fixes to boot from sata - Fix few am437x issues for i2c and pinctrl - Fix beaglebone for hardwared USB configuration - Defconfig changes for NAND, SATA and TPS62362 - Fix n900 i2c numbering for legacy user space and smc91x register offset so it works also for qemu - Fix incomplete USB configuration for dm816x * tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-bone*: usb0 is hardwired for peripheral ARM: dts: dra7x-evm: beagle-x15: Fix USB Host ARM: omap2plus_defconfig: Fix SATA boot ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver ARM: dts: dra7: Correct the dma controller's property names ARM: dts: omap5: Correct the dma controller's property names ARM: dts: omap4: Correct the dma controller's property names ARM: dts: omap3: Correct the dma controller's property names ARM: dts: omap2: Correct the dma controller's property names ARM: dts: am437x-idk: fix sleep pinctrl state ARM: omap2plus_defconfig: enable TPS62362 regulator ARM: dts: am437x-idk: fix TPS62362 i2c bus ARM: dts: n900: Fix offset for smc91x ethernet ARM: dts: n900: fix i2c bus numbering ARM: dts: Fix USB dts configuration for dm816x ARM: dts: OMAP5: Fix SATA PHY node ARM: dts: DRA7: Fix SATA PHY node
2015-02-25arm64: Add L2 cache topology to ARM Ltd boards/modelsSudeep Holla
Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache information") adds cacheinfo support for ARM64. Since there's no architectural way of detecting the cpus that share particular cache, device tree can be used and the core cacheinfo already supports the same. This patch adds the L2 cache topology on Juno board, FVP/RTSM and foundation models. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-25Merge branch 'clockevents/4.0-rc1' of ↵Ingo Molnar
git://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clockevents driver fixes from Daniel Lezcano: - Fix the Kconfig to prevent the asm9260 timer to be compiled with allyesconfig with sparc/sparc64 (Daniel Lezcano) - Reorder the mtk driver init sequence in order to prevent a potential race when the clock is registered before the irq handler is set (Matthias Brugger) - Fix a section mismatch for the pxa driver (Robert Jarzmik) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-25clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfigDaniel Lezcano
The Kconfig options for the asm9260 timer is wrong as it can be selected by another platform with allyes config and thus leading to a compilation failure as some non arch related code is pulled by the compilation. Fix this by having the platform Kconfig to select the timer as it is done for the others drivers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <linux@rempel-privat.de> Conflicts: drivers/clocksource/Kconfig
2015-02-24ARM: dts: am335x-bone*: usb0 is hardwired for peripheralRobert Nelson
Fixes: http://bugs.elinux.org/issues/127 the bb.org community was seeing random reboots before this change. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: dra7x-evm: beagle-x15: Fix USB HostRoger Quadros
In commit 87517d26d888 ("ARM: dts: dra7-evm: Add extcon nodes for USB") we enabled Extcon USB gpio to tackle the USB ID pin and get peripheral mode to work. But the extcon-gpio-usb driver [1] didn't make it into v4.0 and this makes the USB driver defer probe indefinitely breaking USB Host functionality. As a temporary fix we remove the extcon handle from the USB controller and add it back when the extcon driver merges in v4.1. [1] - https://lkml.org/lkml/2015/2/2/187 Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: omap2plus_defconfig: Fix SATA bootRoger Quadros
SATA operation depends on PIPE3 PHY and if we want to boot from SATA drives, we have to have the PIPE3 PHY driver built-in. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>