summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2012-09-03ENGR00222855 MX6 CPUFREQ: support three VDDSOC setpointsrel_imx_3.0.35_12.09.02Robin Gong
2012-09-03ENGR00222841: mx6sl: pgc: display power gating causes PxP processing timeoutRobby Cai
2012-09-03ENGR00222834 MX6x-A9 prefetcher should not access DDR before IO is restoredRanjani Vaidyanathan
2012-09-03ENGR00222835 MX6x-Fix incorrect enabling/disabling of PLL1Ranjani Vaidyanathan
2012-09-02ENGR00222257 MX6x-Prime TLB entries before DDR enters self-refresh.Ranjani Vaidyanathan
2012-09-02ENGR00222157 MX6x-Fix bug in transitioning from low_bus to audio_bus mode.Ranjani Vaidyanathan
2012-08-31ENGR00222134 MX6x - Fix race-conditions in low power code.Ranjani Vaidyanathan
2012-08-31ENGR00222133 MX6SL - Fix crashes caused by Low power IDLE supportRanjani Vaidyanathan
2012-08-30ENGR00221218: imx6: remove redundant spi defineRobby Cai
2012-08-30ENGR00222005 mfgtool can't work on mx6sl evk boardTony LIU
2012-08-29ENGR00221975 Fix race condition in clock code.Ranjani Vaidyanathan
2012-08-29ENGR00221974 MX6SL-Fix system hang/crash issue in low power IDLERanjani Vaidyanathan
2012-08-29ENGR00221970 MX6SL:Fix suspend/resume issue on MX6SLEVKRanjani Vaidyanathan
2012-08-30ENGR00221902 [MX6]Fix udelay inaccurate issue during suspend/resumeAnson Huang
2012-08-29ENGR00221867 sabresd : support adjust VDDSOC if enable LDO bypassRobin Gong
2012-08-29ENGR00221716-02 Mx6 USB host: add port speed define MACRO to arc_otg.hmake shi
2012-08-29ENGR00221716-01 Mx6 USB host: set disconnect bit should wait for resume finishedmake shi
2012-08-29ENGR00221643 [MX6]Fix race condition of pfd 400 usecountAnson Huang
2012-08-29ENGR00221438 [MX6]Adjust CPU setpoint according to datasheetAnson Huang
2012-08-28ENGR00221302 [MX6SL_ARM2/EVK]: VDDSOC adjust if use LDO bypassRobin Gong
2012-08-27ENGR00221457 MX6DL clock:Set PLL3_PFD_540M to 540MHzLiu Ying
2012-08-26ENGR00221161 [MX6SL]- Add audio bus freq mode support.Ranjani Vaidyanathan
2012-08-26ENGR00221440 MX6x-Fix race-condition in checking bus_freq variablesRanjani Vaidyanathan
2012-08-26ENGR00221441 MX6SL - Update voltages based on the latest datasheet.Ranjani Vaidyanathan
2012-08-24ENGR00220796-3: imx6sl arm2/evk: Add platform_device for V4L2 supportRobby Cai
2012-08-24ENGR00221317-02 Mx6 USB host: set stop_mode_config when any USB host enabledmake shi
2012-08-24ENGR00221317-01 Mx6 USB host: set stop_mode_config when any USB host enabledmake shi
2012-08-23ENGR00221277 MX6DL/S - Set AXI clock to 270MHzRanjani Vaidyanathan
2012-08-23ENGR00221281 [MX6X] Fix BogoMIPS value is not correctNancy Chen
2012-08-23ENGR00221131: imx6sl arm2/evk: add mma8450q accelerometer supportRobby Cai
2012-08-23ENGR00221214 MX6Q/DL SabreSD: avoid pop-noise on audio padsGary Zhang
2012-08-23ENGR00221102-2 MX6Q: increase VPU frequence to 352MhzRobin Gong
2012-08-22ENGR00220989 [MX6SL]: DDR Controller measure unit workaroundNancy Chen
2012-08-21ENGR00220696 [MX6SL]-Reduce IDLE mode power consumption.Ranjani Vaidyanathan
2012-08-21ENGR00220776 mx6dl_arm2: ECSPI pin config overlaped by epdcRobin Gong
2012-08-21ENGR00220833 mx6sl: USB hsic: enable mx6sl hsic functionmake shi
2012-08-22ENGR00220370 [MX6]Fix BUS freq suspend/resume fail in low bus modeAnson Huang
2012-08-21ENGR00218789 mx6: clock: keep PLL3 enable and power bit all the timemake shi
2012-08-20ENGR00220818 [MX6SL] - Ensure the Enable bit is set for all the PLLs.Ranjani Vaidyanathan
2012-08-20ENGR00217687 [MX6SL_ARM2/EVK] Fix no perfmon directoryEric Sun
2012-08-20ENGR00220567 [MX6 SABRELite] No mxs-perfmon.0 directoryEric Sun
2012-08-19ENGR00220707 MX6Q/MX6DL: Fix build break due to MX6SL LPM codeRanjani Vaidyanathan
2012-08-17ENGR00220496 MX6SL:Add low power IDLE mode optimizations.Ranjani Vaidyanathan
2012-08-17ENGR00220027-2 mx6sl: add pad ctrl for audmux iomux settingGary Zhang
2012-08-17ENGR00220027-1 IOMUX: add api for special pad bits configurationGary Zhang
2012-08-16ENGR00220341-1 usb: add spin_lock_irqsave protect for pdata->lowpowerPeter Chen
2012-08-16ENGR00220512-2: mx6sl evk: keep NVCC_1V8 and NVCC_1.2V always onRobby Cai
2012-08-16ENGR00220512-1: mx6sl evk: change wm8962 codec 1.8V power source to VGEN3Gary Zhang
2012-08-16ENGR00220388 [MX6]Adjust SOC/PU voltage according to datasheetAnson Huang
2012-08-15ENGR00220497 [MX6Q, MX6DL]: Fix not able to set high bus freqNancy Chen