summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2017-11-15x86/oprofile/ppro: Do not use __this_cpu*() in preemptible contextBorislav Petkov
commit a743bbeef27b9176987ec0cb7f906ab0ab52d1da upstream. The warning below says it all: BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1 caller is __this_cpu_preempt_check CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4 Call Trace: dump_stack check_preemption_disabled ? do_early_param __this_cpu_preempt_check arch_perfmon_init op_nmi_init ? alloc_pci_root_info oprofile_arch_init oprofile_init do_one_initcall ... These accessors should not have been used in the first place: it is PPro so no mixed silicon revisions and thus it can simply use boot_cpu_data. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Fix-creation-mandated-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Robert Richter <rric@kernel.org> Cc: x86@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15MIPS: AR7: Ensure that serial ports are properly set upOswald Buddenhagen
commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type") Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15MIPS: AR7: Defer registration of GPIOJonas Gorski
commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream. When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17542/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15MIPS: SMP: Fix deadlock & online raceMatt Redfearn
commit 9e8c399a88f0b87e41a894911475ed2a8f8dff9e upstream. Commit 6f542ebeaee0 ("MIPS: Fix race on setting and getting cpu_online_mask") effectively reverted commit 8f46cca1e6c06 ("MIPS: SMP: Fix possibility of deadlock when bringing CPUs online") and thus has reinstated the possibility of deadlock. The commit was based on testing of kernel v4.4, where the CPU hotplug core code issued a BUG() if the starting CPU is not marked online when the boot CPU returns from __cpu_up. The commit fixes this race (in v4.4), but re-introduces the deadlock situation. As noted in the commit message, upstream differs in this area. Commit 8df3e07e7f21f ("cpu/hotplug: Let upcoming cpu bring itself fully up") adds a completion event in the CPU hotplug core code, making this race impossible. However, people were unhappy with relying on the core code to do the right thing. To address the issues both commits were trying to fix, add a second completion event in the MIPS smp hotplug path. It removes the possibility of a race, since the MIPS smp hotplug code now synchronises both the boot and secondary CPUs before they return to the hotplug core code. It also addresses the deadlock by ensuring that the secondary CPU is not marked online before it's counters are synchronised. This fix should also be backported to fix the race condition introduced by the backport of commit 8f46cca1e6c06 ("MIPS: SMP: Fix possibility of deadlock when bringing CPUs online"), through really that race only existed before commit 8df3e07e7f21f ("cpu/hotplug: Let upcoming cpu bring itself fully up"). Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Fixes: 6f542ebeaee0 ("MIPS: Fix race on setting and getting cpu_online_mask") CC: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Patchwork: https://patchwork.linux-mips.org/patch/17376/ Signed-off-by: James Hogan <jhogan@kernel.org> [jhogan@kernel.org: Backported 4.1..4.9] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15MIPS: Fix race on setting and getting cpu_online_maskMatija Glavinic Pecotic
commit 6f542ebeaee0ee552a902ce3892220fc22c7ec8e upstream. While testing cpu hoptlug (cpu down and up in loops) on kernel 4.4, it was observed that occasionally check for cpu online will fail in kernel/cpu.c, _cpu_up: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/kernel/cpu.c?h=v4.4.79#n485 518 /* Arch-specific enabling code. */ 519 ret = __cpu_up(cpu, idle); 520 521 if (ret != 0) 522 goto out_notify; 523 BUG_ON(!cpu_online(cpu)); Reason is race between start_secondary and _cpu_up. cpu_callin_map is set before cpu_online_mask. In __cpu_up, cpu_callin_map is waited for, but cpu online mask is not, resulting in race in which secondary processor started and set cpu_callin_map, but not yet set the online mask,resulting in above BUG being hit. Upstream differs in the area. cpu_online check is in bringup_wait_for_ap, which is after cpu reached AP_ONLINE_IDLE,where secondary passed its start function. Nonetheless, fix makes start_secondary safe and not depending on other locks throughout the code. It protects as well against cpu_online checks put in between sometimes in the future. Fix this by moving completion after all flags are set. Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16925/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15MIPS: SMP: Use a completion event to signal CPU upMatt Redfearn
commit a00eeede507c975087b7b8df8cf2c9f88ba285de upstream. If a secondary CPU failed to start, for any reason, the CPU requesting the secondary to start would get stuck in the loop waiting for the secondary to be present in the cpu_callin_map. Rather than that, use a completion event to signal that the secondary CPU has started and is waiting to synchronise counters. Since the CPU presence will no longer be marked in cpu_callin_map, remove the redundant test from arch_cpu_idle_dead(). Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Qais Yousef <qsyousef@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14502/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15MIPS: Fix CM region target definitionsPaul Burton
commit 6a6cba1d945a7511cdfaf338526871195e420762 upstream. The default CM target field in the GCR_BASE register is encoded with 0 meaning memory & 1 being reserved. However the definitions we use for those bits effectively get these two values backwards - likely because they were copied from the definitions for the CM regions where the target is encoded differently. This results in use setting up GCR_BASE with the reserved target value by default, rather than targeting memory as intended. Although we currently seem to get away with this it's not a great idea to rely upon. Fix this by changing our macros to match the documentated target values. The incorrect encoding became used as of commit 9f98f3dd0c51 ("MIPS: Add generic CM probe & access code") in the Linux v3.15 cycle, and was likely carried forwards from older but unused code introduced by commit 39b8d5254246 ("[MIPS] Add support for MIPS CMP platform.") in the v2.6.26 cycle. Fixes: 9f98f3dd0c51 ("MIPS: Add generic CM probe & access code") Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Matt Redfearn <matt.redfearn@mips.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v3.15+ Patchwork: https://patchwork.linux-mips.org/patch/17562/ Signed-off-by: James Hogan <jhogan@kernel.org> [jhogan@kernel.org: Backported 3.15..4.13] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15MIPS: microMIPS: Fix incorrect mask in insn_table_MMGustavo A. R. Silva
commit 77238e76b9156d28d86c1e31c00ed2960df0e4de upstream. It seems that this is a typo error and the proper bit masking is "RT | RS" instead of "RS | RS". This issue was detected with the help of Coccinelle. Fixes: d6b3314b49e1 ("MIPS: uasm: Add lh uam instruction") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: James Hogan <jhogan@kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/17551/ Signed-off-by: James Hogan <jhogan@kernel.org> [jhogan@kernel.org: Backported 3.16..4.12] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15ARM: 8720/1: ensure dump_instr() checks addr_limitMark Rutland
commit b9dd05c7002ee0ca8b676428b2268c26399b5e31 upstream. When CONFIG_DEBUG_USER is enabled, it's possible for a user to deliberately trigger dump_instr() with a chosen kernel address. Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory. So that we can use the same code to dump user instructions and kernel instructions, the common dumping code is factored out to __dump_instr(), with the fs manipulated appropriately in dump_instr() around calls to this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15crypto: x86/sha1-mb - fix panic due to unaligned accessAndrey Ryabinin
commit d041b557792c85677f17e08eee535eafbd6b9aa2 upstream. struct sha1_ctx_mgr allocated in sha1_mb_mod_init() via kzalloc() and later passed in sha1_mb_flusher_mgr_flush_avx2() function where instructions vmovdqa used to access the struct. vmovdqa requires 16-bytes aligned argument, but nothing guarantees that struct sha1_ctx_mgr will have that alignment. Unaligned vmovdqa will generate GP fault. Fix this by replacing vmovdqa with vmovdqu which doesn't have alignment requirements. Fixes: 2249cbb53ead ("crypto: sha-mb - SHA1 multibuffer submit and flush routines for AVX2") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15x86/uaccess, sched/preempt: Verify access_ok() contextPeter Zijlstra
commit 7c4788950ba5922fde976d80b72baf46f14dee8d upstream. I recently encountered wreckage because access_ok() was used where it should not be, add an explicit WARN when access_ok() is used wrongly. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> [add include/preempt.h to fix build error - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15serial: sh-sci: Fix register offsets for the IRDA serial portLaurent Pinchart
[ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6Tony Lindgren
[ Upstream commit 4cd6a59f5c1a9b0cca0da09fbba42b9450ffc899 ] We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15powerpc/corenet: explicitly disable the SDHC controller on kmcoge4Valentin Longchamp
[ Upstream commit a674c7d470bb47e82f4eb1fa944eadeac2f6bbaf ] It is not implemented on the kmcoge4 hardware and if not disabled it leads to error messages with the corenet32_smp_defconfig. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counterLi Zhong
[ Upstream commit 37451bc95dee0e666927d6ffdda302dbbaaae6fa ] Some counters are added in Commit 6e0365b78273 ("KVM: PPC: Book3S HV: Add ICP real mode counters"), to provide some performance statistics to determine whether further optimizing is needed for real mode functions. The n_reject counter counts how many times ICP rejects an irq because of priority in real mode. The redelivery of an lsi that is still asserted after eoi doesn't fall into this category, so the increasement there is removed. Also, it needs to be increased in icp_rm_deliver_irq() if it rejects another one. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08ARM: pxa: Don't rely on public mmc header to include leds.hUlf Hansson
[ Upstream commit 40d727a2defa176b78159d445bcf7afcc2ed9021 ] Some of the pxa platforms, balloon3, colibri-pxa270-income, corgi, trizeps4, vpac270, zeus and zylonite depends on leds.h. Explicitly include it instead of relying on the public mmc header host.h. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08ARM: 8715/1: add a private asm/unaligned.hArnd Bergmann
commit 1cce91dfc8f7990ca3aea896bfb148f240b12860 upstream. The asm-generic/unaligned.h header provides two different implementations for accessing unaligned variables: the access_ok.h version used when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set pretends that all pointers are in fact aligned, while the le_struct.h version convinces gcc that the alignment of a pointer is '1', to make it issue the correct load/store instructions depending on the architecture flags. On ARMv5 and older, we always use the second version, to let the compiler use byte accesses. On ARMv6 and newer, we currently use the access_ok.h version, so the compiler can use any instruction including stm/ldm and ldrd/strd that will cause an alignment trap. This trap can significantly impact performance when we have to do a lot of fixups and, worse, has led to crashes in the LZ4 decompressor code that does not have a trap handler. This adds an ARM specific version of asm/unaligned.h that uses the le_struct.h/be_struct.h implementation unconditionally. This should lead to essentially the same code on ARMv6+ as before, with the exception of using regular load/store instructions instead of the trapping instructions multi-register variants. The crash in the LZ4 decompressor code was probably introduced by the patch replacing the LZ4 implementation, commit 4e1a33b105dd ("lib: update LZ4 compressor module"), so linux-4.11 and higher would be affected most. However, we probably want to have this backported to all older stable kernels as well, to help with the performance issues. There are two follow-ups that I think we should also work on, but not backport to stable kernels, first to change the asm-generic version of the header to remove the ARM special case, and second to review all other uses of CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to see if they might be affected by the same problem on ARM. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08ARM: dts: mvebu: pl310-cache disable double-linefillYan Markman
commit cda80a82ac3e89309706c027ada6ab232be1d640 upstream. Under heavy system stress mvebu SoC using Cortex A9 sporadically encountered instability issues. The "double linefill" feature of L2 cache was identified as causing dependency between read and write which lead to the deadlock. Especially, it was the cause of deadlock seen under heavy PCIe traffic, as this dependency violates PCIE overtaking rule. Fixes: c8f5a878e554 ("ARM: mvebu: use DT properties to fine-tune the L2 configuration") Signed-off-by: Yan Markman <ymarkman@marvell.com> Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Nadav Haklai <nadavh@marvell.com> [gregory.clement@free-electrons.com: reformulate commit log, add Armada 375 and add Fixes tag] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08arm64: ensure __dump_instr() checks addr_limitMark Rutland
commit 7a7003b1da010d2b0d1dc8bf21c10f5c73b389f1 upstream. It's possible for a user to deliberately trigger __dump_instr with a chosen kernel address. Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory. Where we use __dump_instr() on kernel text, we already switch to KERNEL_DS, so this shouldn't adversely affect those cases. Fixes: 60ffc30d5652810d ("arm64: Exception handling") Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02x86/microcode/intel: Disable late loading on model 79Borislav Petkov
commit 723f2828a98c8ca19842042f418fb30dd8cfc0f7 upstream. Blacklist Broadwell X model 79 for late loading due to an erratum. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171018111225.25635-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27parisc: Fix double-word compare and exchange in LWS code on 32-bit kernelsJohn David Anglin
commit 374b3bf8e8b519f61eb9775888074c6e46b3bf0c upstream. As discussed on the debian-hppa list, double-wordcompare and exchange operations fail on 32-bit kernels. Looking at the code, I realized that the ",ma" completer does the wrong thing in the "ldw,ma 4(%r26), %r29" instruction. This increments %r26 and causes the following store to write to the wrong location. Note by Helge Deller: The patch applies cleanly to stable kernel series if this upstream commit is merged in advance: f4125cfdb300 ("parisc: Avoid trashing sr2 and sr3 in LWS code"). Signed-off-by: John David Anglin <dave.anglin@bell.net> Tested-by: Christoph Biedl <debian.axhn@manchmal.in-ulm.de> Fixes: 89206491201c ("parisc: Implement new LWS CAS supporting 64 bit operations.") Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27parisc: Avoid trashing sr2 and sr3 in LWS codeJohn David Anglin
commit f4125cfdb3008363137f744c101e5d76ead760ba upstream. There is no need to trash sr2 and sr3 in the Light-weight syscall (LWS). sr2 already points to kernel space (it's zero in userspace, otherwise syscalls wouldn't work), and since the LWS code is executed in userspace, we can simply ignore to preload sr3. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21sparc64: Migrate hvcons irq to panicked cpuVijay Kumar
[ Upstream commit 7dd4fcf5b70694dc961eb6b954673e4fc9730dbd ] On panic, all other CPUs are stopped except the one which had hit panic. To keep console alive, we need to migrate hvcons irq to panicked CPU. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21MIPS: Fix minimum alignment requirement of IRQ stackMatt Redfearn
commit 5fdc66e046206306bf61ff2d626bfa52ca087f7b upstream. Commit db8466c581cc ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack") erroneously set the initial stack pointer of the IRQ stack to a value with a 4 byte alignment. The MIPS32 ABI requires that the minimum stack alignment is 8 byte, and the MIPS64 ABIs(n32/n64) require 16 byte minimum alignment. Fix IRQ_STACK_START such that it leaves space for the dummy stack frame (containing interrupted task kernel stack pointer) while also meeting minimum alignment requirements. Fixes: db8466c581cc ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack") Reported-by: Darius Ivanauskas <dasilt@yahoo.com> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16760/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18x86/alternatives: Fix alt_max_short macro to really be a max()Mathias Krause
commit 6b32c126d33d5cb379bca280ab8acedc1ca978ff upstream. The alt_max_short() macro in asm/alternative.h does not work as intended, leading to nasty bugs. E.g. alt_max_short("1", "3") evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not exactly the maximum of 1 and 3. In fact, I had to learn it the hard way by crashing my kernel in not so funny ways by attempting to make use of the ALTENATIVE_2 macro with alternatives where the first one was larger than the second one. According to [1] and commit dbe4058a6a44 ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly") the right handed side should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the macro work as intended. While at it, fix up the comments regarding the additional "-", too. It's not about gas' usage of s32 but brain dead logic of having a "true" value of -1 for the < operator ... *sigh* Btw., the one in asm/alternative-asm.h is correct. And, apparently, all current users of ALTERNATIVE_2() pass same sized alternatives, avoiding to hit the bug. [1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax Reviewed-and-tested-by: Borislav Petkov <bp@suse.de> Fixes: dbe4058a6a44 ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly") Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/1507228213-13095-1-git-send-email-minipli@googlemail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18KVM: nVMX: fix guest CR4 loading when emulating L2 to L1 exitHaozhong Zhang
commit 8eb3f87d903168bdbd1222776a6b1e281f50513e upstream. When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the guest CR4. Before this CR4 loading, the guest CR4 refers to L2 CR4. Because these two CR4's are in different levels of guest, we should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which is used to handle guest writes to its CR4, checks the guest change to CR4 and may fail if the change is invalid. The failure may cause trouble. Consider we start a L1 guest with non-zero L1 PCID in use, (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0) and a L2 guest with L2 PCID disabled, (i.e. L2 CR4.PCIDE == 0) and following events may happen: 1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4 into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e. vcpu->arch.cr4) is left to the value of L2 CR4. 2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit, kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID, because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1 CR3.PCID != 0, L0 KVM will inject GP to L1 guest. Fixes: 4704d0befb072 ("KVM: nVMX: Exiting from L2 to L1") Cc: qemu-stable@nongnu.org Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18MIPS: math-emu: Remove pr_err() calls from fpu_emu()Paul Burton
commit ca8eb05b5f332a9e1ab3e2ece498d49f4d683470 upstream. The FPU emulator includes 2 calls to pr_err() which are triggered by invalid instruction encodings for MIPSr6 cmp.cond.fmt instructions. These cases are not kernel errors, merely invalid instructions which are already handled by delivering a SIGILL which will provide notification that something failed in cases where that makes sense. In cases where that SIGILL is somewhat expected & being handled, for example when crashme happens to generate one of the affected bad encodings, the message is printed with no useful context about what triggered it & spams the kernel log for no good reason. Remove the pr_err() calls to make crashme run silently & treat the bad encodings the same way we do others, with a SIGILL & no further kernel log output. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: f8c3c6717a71 ("MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17253/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ARM: remove duplicate 'const' annotations'Arnd Bergmann
commit 0527873b29b077fc8e656acd63e1866b429fef55 upstream. gcc-7 warns about some declarations that are more 'const' than necessary: arch/arm/mach-at91/pm.c:338:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const ramc_ids[] __initconst = { arch/arm/mach-bcm/bcm_kona_smc.c:36:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const bcm_kona_smc_ids[] __initconst = { arch/arm/mach-spear/time.c:207:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const timer_of_match[] __initconst = { arch/arm/mach-omap2/prm_common.c:714:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = { arch/arm/mach-omap2/vc.c:562:35: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = { The ones in arch/arm were apparently all introduced accidentally by one commit that correctly marked a lot of variables as __initconst. Fixes: 19c233b79d1a ("ARM: appropriate __init annotation for const data") Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08parisc: perf: Fix potential NULL pointer dereferenceArvind Yadav
[ Upstream commit 74e3f6e63da6c8e8246fba1689e040bc926b4a1a ] Fix potential NULL pointer dereference and clean up coding style errors (code indent, trailing whitespaces). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08MIPS: IRQ Stack: Unwind IRQ stack onto task stackMatt Redfearn
[ Upstream commit db8466c581cca1a08b505f1319c3ecd246f16fa8 ] When the separate IRQ stack was introduced, stack unwinding only proceeded as far as the top of the IRQ stack, leading to kernel backtraces being less useful, lacking the trace of what was interrupted. Fix this by providing a means for the kernel to unwind the IRQ stack onto the interrupted task stack. The processor state is saved to the kernel task stack on interrupt. The IRQ_STACK_START macro reserves an unsigned long at the top of the IRQ stack where the interrupted task stack pointer can be saved. After the active stack is switched to the IRQ stack, save the interrupted tasks stack pointer to the reserved location. Fix the stack unwinding code to look for the frame being the top of the IRQ stack and if so get the next frame from the saved location. The existing test does not work with the separate stack since the ra is no longer pointed at ret_from_{irq,exception}. The test to stop unwinding the stack 32 bytes from the top of a stack must be modified to allow unwinding to continue up to the location of the saved task stack pointer when on the IRQ stack. The low / high marks of the stack are set depending on whether the sp is on an irq stack or not. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15788/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08MIPS: Lantiq: Fix another request_mem_region() return code checkArnd Bergmann
[ Upstream commit 98ea51cb0c8ce009d9da1fd7b48f0ff1d7a9bbb0 ] Hauke already fixed a couple of them, but one instance remains that checks for a negative integer when it should check for a NULL pointer: arch/mips/lantiq/xway/sysctrl.c: In function 'ltq_soc_init': arch/mips/lantiq/xway/sysctrl.c:473:19: error: ordered comparison of pointer with integer zero [-Werror=extra] Fixes: 6e807852676a ("MIPS: Lantiq: Fix check for return value of request_mem_region()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15043/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ARM: 8635/1: nommu: allow enabling REMAP_VECTORS_TO_RAMAfzal Mohammed
[ Upstream commit 8a792e9afbce84a0fdaf213fe42bb97382487094 ] REMAP_VECTORS_TO_RAM depends on DRAM_BASE, but since DRAM_BASE is a hex, REMAP_VECTORS_TO_RAM could never get enabled. Also depending on DRAM_BASE is redundant as whenever REMAP_VECTORS_TO_RAM makes itself available to Kconfig, DRAM_BASE also is available as the Kconfig gets sourced on !MMU. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08MIPS: ralink: Fix incorrect assignment on ralink_socColin Ian King
[ Upstream commit 08d90c81b714482dceb5323d14f6617bcf55ee61 ] ralink_soc sould be assigned to RT3883_SOC, replace incorrect comparision with assignment. Signed-off-by: Colin Ian King <colin.king@canonical.com> Fixes: 418d29c87061 ("MIPS: ralink: Unify SoC id handling") Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14903/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08MIPS: Ensure bss section ends on a long-aligned addressPaul Burton
[ Upstream commit 3f00f4d8f083bc61005d0a1ef592b149f5c88bbd ] When clearing the .bss section in kernel_entry we do so using LONG_S instructions, and branch whilst the current write address doesn't equal the end of the .bss section minus the size of a long integer. The .bss section always begins at a long-aligned address and we always increment the write pointer by the size of a long integer - we therefore rely upon the .bss section ending at a long-aligned address. If this is not the case then the long-aligned write address can never be equal to the non-long-aligned end address & we will continue to increment past the end of the .bss section, attempting to zero the rest of memory. Despite this requirement that .bss end at a long-aligned address we pass 0 as the end alignment requirement to the BSS_SECTION macro and thus don't guarantee any particular alignment, allowing us to hit the error condition described above. Fix this by instead passing 8 bytes as the end alignment argument to the BSS_SECTION macro, ensuring that the end of the .bss section is always at least long-aligned. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14526/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for msiof nodesSimon Horman
[ Upstream commit 654450baf2afba86cf328e1849ccac61ec4630af ] Use recently added R-Car Gen 2 fallback binding for msiof nodes in DT for r8a7790 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7790 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05swiotlb-xen: implement xen_swiotlb_dma_mmap callbackStefano Stabellini
commit 7e91c7df29b5e196de3dc6f086c8937973bd0b88 upstream. This function creates userspace mapping for the DMA-coherent memory. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@globallogic.com> Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05KVM: VMX: use cmpxchg64Paolo Bonzini
commit c0a1666bcb2a33e84187a15eabdcd54056be9a97 upstream. This fixes a compilation failure on 32-bit systems. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05ARM: pxa: fix the number of DMA requestor linesRobert Jarzmik
commit 4c35430ad18f5a034302cb90e559ede5a27f93b9 upstream. The number of requestor lines was clamped to 0 for all pxa architectures in the requestor declaration. Fix this by using the value. Fixes: 72b195cb7162 ("ARM: pxa: add the number of DMA requestor lines") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05ARM: pxa: add the number of DMA requestor linesRobert Jarzmik
commit 72b195cb716284217e8b270af420bc7e5cf04b3c upstream. Declare the number of DMA requestor lines per platform : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines This information will be used to activate the DMA flow control or not. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05KVM: VMX: remove WARN_ON_ONCE in kvm_vcpu_trigger_posted_interruptHaozhong Zhang
commit 5753743fa5108b8f98bd61e40dc63f641b26c768 upstream. WARN_ON_ONCE(pi_test_sn(&vmx->pi_desc)) in kvm_vcpu_trigger_posted_interrupt() intends to detect the violation of invariant that VT-d PI notification event is not suppressed when vcpu is in the guest mode. Because the two checks for the target vcpu mode and the target suppress field cannot be performed atomically, the target vcpu mode may change in between. If that does happen, WARN_ON_ONCE() here may raise false alarms. As the previous patch fixed the real invariant breaker, remove this WARN_ON_ONCE() to avoid false alarms, and document the allowed cases instead. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reported-by: "Ramamurthy, Venkatesh" <venkatesh.ramamurthy@intel.com> Reported-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: 28b835d60fcc ("KVM: Update Posted-Interrupts Descriptor when vCPU is preempted") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05KVM: VMX: do not change SN bit in vmx_update_pi_irte()Haozhong Zhang
commit dc91f2eb1a4021eb6705c15e474942f84ab9b211 upstream. In kvm_vcpu_trigger_posted_interrupt() and pi_pre_block(), KVM assumes that PI notification events should not be suppressed when the target vCPU is not blocked. vmx_update_pi_irte() sets the SN field before changing an interrupt from posting to remapping, but it does not check the vCPU mode. Therefore, the change of SN field may break above the assumption. Besides, I don't see reasons to suppress notification events here, so remove the changes of SN field to avoid race condition. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reported-by: "Ramamurthy, Venkatesh" <venkatesh.ramamurthy@intel.com> Reported-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: 28b835d60fcc ("KVM: Update Posted-Interrupts Descriptor when vCPU is preempted") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05x86/fpu: Don't let userspace set bogus xcomp_bvEric Biggers
commit 814fb7bb7db5433757d76f4c4502c96fc53b0b5e upstream. [Please apply to 4.4-stable. Note: the backport includes the fpstate_init() call in xstateregs_set(), since fix is useless without it. It was added by commit 91c3dba7dbc1 ("x86/fpu/xstate: Fix PTRACE frames for XSAVES"), but it doesn't make sense to backport that whole commit.] On x86, userspace can use the ptrace() or rt_sigreturn() system calls to set a task's extended state (xstate) or "FPU" registers. ptrace() can set them for another task using the PTRACE_SETREGSET request with NT_X86_XSTATE, while rt_sigreturn() can set them for the current task. In either case, registers can be set to any value, but the kernel assumes that the XSAVE area itself remains valid in the sense that the CPU can restore it. However, in the case where the kernel is using the uncompacted xstate format (which it does whenever the XSAVES instruction is unavailable), it was possible for userspace to set the xcomp_bv field in the xstate_header to an arbitrary value. However, all bits in that field are reserved in the uncompacted case, so when switching to a task with nonzero xcomp_bv, the XRSTOR instruction failed with a #GP fault. This caused the WARN_ON_FPU(err) in copy_kernel_to_xregs() to be hit. In addition, since the error is otherwise ignored, the FPU registers from the task previously executing on the CPU were leaked. Fix the bug by checking that the user-supplied value of xcomp_bv is 0 in the uncompacted case, and returning an error otherwise. The reason for validating xcomp_bv rather than simply overwriting it with 0 is that we want userspace to see an error if it (incorrectly) provides an XSAVE area in compacted format rather than in uncompacted format. Note that as before, in case of error we clear the task's FPU state. This is perhaps non-ideal, especially for PTRACE_SETREGSET; it might be better to return an error before changing anything. But it seems the "clear on error" behavior is fine for now, and it's a little tricky to do otherwise because it would mean we couldn't simply copy the full userspace state into kernel memory in one __copy_from_user(). This bug was found by syzkaller, which hit the above-mentioned WARN_ON_FPU(): WARNING: CPU: 1 PID: 0 at ./arch/x86/include/asm/fpu/internal.h:373 __switch_to+0x5b5/0x5d0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.13.0 #453 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff9ba2bc8e42c0 task.stack: ffffa78cc036c000 RIP: 0010:__switch_to+0x5b5/0x5d0 RSP: 0000:ffffa78cc08bbb88 EFLAGS: 00010082 RAX: 00000000fffffffe RBX: ffff9ba2b8bf2180 RCX: 00000000c0000100 RDX: 00000000ffffffff RSI: 000000005cb10700 RDI: ffff9ba2b8bf36c0 RBP: ffffa78cc08bbbd0 R08: 00000000929fdf46 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9ba2bc8e42c0 R13: 0000000000000000 R14: ffff9ba2b8bf3680 R15: ffff9ba2bf5d7b40 FS: 00007f7e5cb10700(0000) GS:ffff9ba2bf400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004005cc CR3: 0000000079fd5000 CR4: 00000000001406e0 Call Trace: Code: 84 00 00 00 00 00 e9 11 fd ff ff 0f ff 66 0f 1f 84 00 00 00 00 00 e9 e7 fa ff ff 0f ff 66 0f 1f 84 00 00 00 00 00 e9 c2 fa ff ff <0f> ff 66 0f 1f 84 00 00 00 00 00 e9 d4 fc ff ff 66 66 2e 0f 1f Here is a C reproducer. The expected behavior is that the program spin forever with no output. However, on a buggy kernel running on a processor with the "xsave" feature but without the "xsaves" feature (e.g. Sandy Bridge through Broadwell for Intel), within a second or two the program reports that the xmm registers were corrupted, i.e. were not restored correctly. With CONFIG_X86_DEBUG_FPU=y it also hits the above kernel warning. #define _GNU_SOURCE #include <stdbool.h> #include <inttypes.h> #include <linux/elf.h> #include <stdio.h> #include <sys/ptrace.h> #include <sys/uio.h> #include <sys/wait.h> #include <unistd.h> int main(void) { int pid = fork(); uint64_t xstate[512]; struct iovec iov = { .iov_base = xstate, .iov_len = sizeof(xstate) }; if (pid == 0) { bool tracee = true; for (int i = 0; i < sysconf(_SC_NPROCESSORS_ONLN) && tracee; i++) tracee = (fork() != 0); uint32_t xmm0[4] = { [0 ... 3] = tracee ? 0x00000000 : 0xDEADBEEF }; asm volatile(" movdqu %0, %%xmm0\n" " mov %0, %%rbx\n" "1: movdqu %%xmm0, %0\n" " mov %0, %%rax\n" " cmp %%rax, %%rbx\n" " je 1b\n" : "+m" (xmm0) : : "rax", "rbx", "xmm0"); printf("BUG: xmm registers corrupted! tracee=%d, xmm0=%08X%08X%08X%08X\n", tracee, xmm0[0], xmm0[1], xmm0[2], xmm0[3]); } else { usleep(100000); ptrace(PTRACE_ATTACH, pid, 0, 0); wait(NULL); ptrace(PTRACE_GETREGSET, pid, NT_X86_XSTATE, &iov); xstate[65] = -1; ptrace(PTRACE_SETREGSET, pid, NT_X86_XSTATE, &iov); ptrace(PTRACE_CONT, pid, 0, 0); wait(NULL); } return 1; } Note: the program only tests for the bug using the ptrace() system call. The bug can also be reproduced using the rt_sigreturn() system call, but only when called from a 32-bit program, since for 64-bit programs the kernel restores the FPU state from the signal frame by doing XRSTOR directly from userspace memory (with proper error checking). Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: kernel-hardening@lists.openwall.com Fixes: 0b29643a5843 ("x86/xsaves: Change compacted format xsave area header") Link: http://lkml.kernel.org/r/20170922174156.16780-2-ebiggers3@gmail.com Link: http://lkml.kernel.org/r/20170923130016.21448-25-mingo@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05kvm: nVMX: Don't allow L2 to access the hardware CR8Jim Mattson
commit 51aa68e7d57e3217192d88ce90fd5b8ef29ec94f upstream. If L1 does not specify the "use TPR shadow" VM-execution control in vmcs12, then L0 must specify the "CR8-load exiting" and "CR8-store exiting" VM-execution controls in vmcs02. Failure to do so will give the L2 VM unrestricted read/write access to the hardware CR8. This fixes CVE-2017-12154. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05KVM: VMX: Do not BUG() on out-of-bounds guest IRQJan H. Schönherr
commit 3a8b0677fc6180a467e26cc32ce6b0c09a32f9bb upstream. The value of the guest_irq argument to vmx_update_pi_irte() is ultimately coming from a KVM_IRQFD API call. Do not BUG() in vmx_update_pi_irte() if the value is out-of bounds. (Especially, since KVM as a whole seems to hang after that.) Instead, print a message only once if we find that we don't have a route for a certain IRQ (which can be out-of-bounds or within the array). This fixes CVE-2017-1000252. Fixes: efc644048ecde54 ("KVM: x86: Update IRTE for posted-interrupts") Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05arm64: fault: Route pte translation faults via do_translation_faultWill Deacon
commit 760bfb47c36a07741a089bf6a28e854ffbee7dc9 upstream. We currently route pte translation faults via do_page_fault, which elides the address check against TASK_SIZE before invoking the mm fault handling code. However, this can cause issues with the path walking code in conjunction with our word-at-a-time implementation because load_unaligned_zeropad can end up faulting in kernel space if it reads across a page boundary and runs into a page fault (e.g. by attempting to read from a guard region). In the case of such a fault, load_unaligned_zeropad has registered a fixup to shift the valid data and pad with zeroes, however the abort is reported as a level 3 translation fault and we dispatch it straight to do_page_fault, despite it being a kernel address. This results in calling a sleeping function from atomic context: BUG: sleeping function called from invalid context at arch/arm64/mm/fault.c:313 in_atomic(): 0, irqs_disabled(): 0, pid: 10290 Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] [<ffffff8e016cd0cc>] ___might_sleep+0x134/0x144 [<ffffff8e016cd158>] __might_sleep+0x7c/0x8c [<ffffff8e016977f0>] do_page_fault+0x140/0x330 [<ffffff8e01681328>] do_mem_abort+0x54/0xb0 Exception stack(0xfffffffb20247a70 to 0xfffffffb20247ba0) [...] [<ffffff8e016844fc>] el1_da+0x18/0x78 [<ffffff8e017f399c>] path_parentat+0x44/0x88 [<ffffff8e017f4c9c>] filename_parentat+0x5c/0xd8 [<ffffff8e017f5044>] filename_create+0x4c/0x128 [<ffffff8e017f59e4>] SyS_mkdirat+0x50/0xc8 [<ffffff8e01684e30>] el0_svc_naked+0x24/0x28 Code: 36380080 d5384100 f9400800 9402566d (d4210000) ---[ end trace 2d01889f2bca9b9f ]--- Fix this by dispatching all translation faults to do_translation_faults, which avoids invoking the page fault logic for faults on kernel addresses. Reported-by: Ankit Jain <ankijain@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05arm64: Make sure SPsel is always setMarc Zyngier
commit 5371513fb338fb9989c569dc071326d369d6ade8 upstream. When the kernel is entered at EL2 on an ARMv8.0 system, we construct the EL1 pstate and make sure this uses the the EL1 stack pointer (we perform an exception return to EL1h). But if the kernel is either entered at EL1 or stays at EL2 (because we're on a VHE-capable system), we fail to set SPsel, and use whatever stack selection the higher exception level has choosen for us. Let's not take any chance, and make sure that SPsel is set to one before we decide the mode we're going to run in. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05powerpc/pseries: Fix parent_dn reference leak in add_dt_node()Tyrel Datwyler
commit b537ca6fede69a281dc524983e5e633d79a10a08 upstream. A reference to the parent device node is held by add_dt_node() for the node to be added. If the call to dlpar_configure_connector() fails add_dt_node() returns ENOENT and that reference is not freed. Add a call to of_node_put(parent_dn) prior to bailing out after a failed dlpar_configure_connector() call. Fixes: 8d5ff320766f ("powerpc/pseries: Make dlpar_configure_connector parent node aware") Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05KVM: PPC: Book3S: Fix race and leak in kvm_vm_ioctl_create_spapr_tce()Paul Mackerras
commit 47c5310a8dbe7c2cb9f0083daa43ceed76c257fa upstream, with part of commit edd03602d97236e8fea13cd76886c576186aa307 folded in. Nixiaoming pointed out that there is a memory leak in kvm_vm_ioctl_create_spapr_tce() if the call to anon_inode_getfd() fails; the memory allocated for the kvmppc_spapr_tce_table struct is not freed, and nor are the pages allocated for the iommu tables. David Hildenbrand pointed out that there is a race in that the function checks early on that there is not already an entry in the stt->iommu_tables list with the same LIOBN, but an entry with the same LIOBN could get added between then and when the new entry is added to the list. This fixes both problems. To simplify things, we now call anon_inode_getfd() before placing the new entry in the list. The check for an existing entry is done while holding the kvm->lock mutex, immediately before adding the new entry to the list. [paulus@ozlabs.org - folded in that part of edd03602d972 ("KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list", 2017-08-28) which restructured the code that 47c5310a8dbe modified, to avoid a build failure caused by the absence of put_unused_fd(). Also removed the locked memory accounting, since it doesn't exist in this version, and adjusted the commit message.] Fixes: 54738c097163 ("KVM: PPC: Accelerate H_PUT_TCE by implementing it in real mode") Reported-by: Nixiaoming <nixiaoming@huawei.com> Reported-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27ARC: Re-enable MMU upon Machine Check exceptionJose Abreu
commit 1ee55a8f7f6b7ca4c0c59e0b4b4e3584a085c2d3 upstream. I recently came upon a scenario where I would get a double fault machine check exception tiriggered by a kernel module. However the ensuing crash stacktrace (ksym lookup) was not working correctly. Turns out that machine check auto-disables MMU while modules are allocated in kernel vaddr spapce. This patch re-enables the MMU before start printing the stacktrace making stacktracing of modules work upon a fatal exception. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: moved code into low level handler to avoid in 2 places] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27powerpc: Fix DAR reporting when alignment handler faultsMichael Ellerman
commit f9effe925039cf54489b5c04e0d40073bb3a123d upstream. Anton noticed that if we fault part way through emulating an unaligned instruction, we don't update the DAR to reflect that. The DAR value is eventually reported back to userspace as the address in the SEGV signal, and if userspace is using that value to demand fault then it can be confused by us not setting the value correctly. This patch is ugly as hell, but is intended to be the minimal fix and back ports easily. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-28 11:25:11 +0000