summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-03-04x86, efi: Allow slash in file path of initrdLee, Chun-Yi
commit deb94101c4fda22e152c2a311210cf09ae51adf6 upstream. When initrd file didn't put at the same place with stub kernel, we need give the file path of initrd, but need use backslash to separate directory and file. It's not friendly to unix/linux user, and not so intuitive for bootloader forward paramters to efi stub kernel by chainloading. This patch add support to handle_ramdisks for allow slash in file path of initrd, it convert slash to backlash when parsing path. In additional, this patch also separates print code of efi_char16_t from efi_printk, and print out the path/filename of initrd when failed to open initrd file. It's good for debug and discover typo. Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04x86: Make sure we can boot in the case the BDA contains pure garbageH. Peter Anvin
commit 7c10093692ed2e6f318387d96b829320aa0ca64c upstream. On non-BIOS platforms it is possible that the BIOS data area contains garbage instead of being zeroed or something equivalent (firmware people: we are talking of 1.5K here, so please do the sane thing.) We need on the order of 20-30K of low memory in order to boot, which may grow up to < 64K in the future. We probably want to avoid the lowest of the low memory. At the same time, it seems extremely unlikely that a legitimate EBDA would ever reach down to the 128K (which would require it to be over half a megabyte in size.) Thus, pick 128K as the cutoff for "this is insane, ignore." We may still end up reserving a bunch of extra memory on the low megabyte, but that is not really a major issue these days. In the worst case we lose 512K of RAM. This code really should be merged with trim_bios_range() in arch/x86/kernel/setup.c, but that is a bigger patch for a later merge window. Reported-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/n/tip-oebml055yyfm8yxmria09rja@git.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04x86, efi: Make "noefi" really disable EFI runtime serivcesMatt Fleming
commit fb834c7acc5e140cf4f9e86da93a66de8c0514da upstream. commit 1de63d60cd5b ("efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter") attempted to make "noefi" true to its documentation and disable EFI runtime services to prevent the bricking bug described in commit e0094244e41c ("samsung-laptop: Disable on EFI hardware"). However, it's not possible to clear EFI_RUNTIME_SERVICES from an early param function because EFI_RUNTIME_SERVICES is set in efi_init() *after* parse_early_param(). This resulted in "noefi" effectively becoming a no-op and no longer providing users with a way to disable EFI, which is bad for those users that have buggy machines. Reported-by: Walt Nelson Jr <walt0924@gmail.com> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1361392572-25657-1-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-04x86/apic: Fix parsing of the 'lapic' cmdline optionMathias Krause
commit 27cf929845b10043f2257693c7d179a9e0b1980e upstream. Including " lapic " in the kernel cmdline on an x86-64 kernel makes it panic while parsing early params -- e.g. with no user visible output. Fix this bug by ensuring arg is non-NULL before passing it to strncmp(). Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1361303227-13174-1-git-send-email-minipli@googlemail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28Purge existing TLB entries in set_pte_at and ptep_set_wrprotectJohn David Anglin
commit 7139bc1579901b53db7e898789e916ee2fb52d78 upstream. This patch goes a long way toward fixing the minifail bug, and it  significantly improves the stability of SMP machines such as the rp3440.  When write  protecting a page for COW, we need to purge the existing translation.  Otherwise, the COW break doesn't occur as expected because the TLB may still have a stale entry which allows writes. [jejb: fix up checkpatch errors] Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28powerpc/eeh: Fix crash when adding a device in a slot with DDWThadeu Lima de Souza Cascardo
commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream. The DDW code uses a eeh_dev struct from the pci_dev. However, this is not set until eeh_add_device_late is called. Since pci_bus_add_devices is called before eeh_add_device_late, the PCI devices are added to the bus, making drivers' probe hooks to be called. These will call set_dma_mask, which will call the DDW code, which will require the eeh_dev struct from pci_dev. This would result in a crash, due to a NULL dereference. Calling eeh_add_device_late after pci_bus_add_devices would make the system BUG, because device files shouldn't be added to devices there were not added to the system. So, a new function is needed to add such files only after pci_bus_add_devices have been called. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28uprobes/powerpc: Add dependency on single step emulationSuzuki K. Poulose
commit 5e249d4528528c9a77da051a89ec7f99d31b83eb upstream. Uprobes uses emulate_step in sstep.c, but we haven't explicitly specified the dependency. On pseries HAVE_HW_BREAKPOINT protects us, but 44x has no such luxury. Consolidate other users that depend on sstep and create a new config option. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28powerpc/kexec: Disable hard IRQ before kexecPhileas Fogg
commit 8520e443aa56cc157b015205ea53e7b9fc831291 upstream. Disable hard IRQ before kexec a new kernel image. Not doing it can result in corrupted data in the memory segments reserved for the new kernel. Signed-off-by: Phileas Fogg <phileas-fogg@mail.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: 7643/1: sched: correct update_sched_clock()Joonsoo Kim
commit 7c4e9ced424be4d36df6a3e3825763e97ee97607 upstream. If we want load epoch_cyc and epoch_ns atomically, we should update epoch_cyc_copy first of all. This notify reader that updating is in progress. If we update epoch_cyc first like as current implementation, there is subtle error case. Look at the below example. <Initial Condition> cyc = 9 ns = 900 cyc_copy = 9 == CASE 1 == <CPU A = reader> <CPU B = updater> write cyc = 10 read cyc = 10 read ns = 900 write ns = 1000 write cyc_copy = 10 read cyc_copy = 10 output = (10, 900) == CASE 2 == <CPU A = reader> <CPU B = updater> read cyc = 9 write cyc = 10 write ns = 1000 read ns = 1000 read cyc_copy = 9 write cyc_copy = 10 output = (9, 1000) If atomic read is ensured, output should be (9, 900) or (10, 1000). But, output in example case are not. So, change updating sequence in order to correct this problem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28arm64: compat: use compat_uptr_t type for compat_ucontext.uc_linkWill Deacon
commit c0e01d5d8f15c085236df184e5bc3d79a8b700cd upstream. struct compat_ucontext * is a 64-bit pointer, so we need to use a compat_uptr_t instead to avoid declaring a structure incompatible with what AArch32 userspace expects. Reported-by: Edmund Grimley-Evans <Edmund.Grimley-Evans@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMUWill Deacon
commit ab2a724a2ef9cee5957692257a5d1f08fd7acbbd upstream. When running on Integrator/AP using atags, ap_syscon_base is initialised in ->map_io, which isn't called for !MMU platforms. Instead, initialise the pointer in ->machine_init, as we do when booting with device-tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: i.MX25: clk: parent per5_clk to AHB clockSteffen Trumtrar
commit 4b526ca5f627188425184a22ed46c91baa602d43 upstream. The mxc-timer on the imx25 needs to be derived from the AHB clock. If a bootloader reparents this clock to the ipg_clk_highfreq, which according to the datasheet is a valid operation, the system can/will produce lockups/ freezes after some time [1]. This can be forced with code like while(1) syscall(SYS_clock_gettime, CLOCK_REALTIME, &tp); This was already fixed with the commit "i.MX25 GPT clock fix: ensure correct the clock source" [2], for 3.1-rc2, but was lost, when i.MX was converted to the common clock framework ("ARM i.MX25: implement clocks using common clock framework") [3] [1]: http://lists.arm.linux.org.uk/lurker/message/20130129.161230.229bda17.en.html [2]: 2012d9ca2a1381ae3e733330a7f0d1d2f1988bba [3]: 6bbaec5676e4f475b0d78743cbd4c70a8804ce14 Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: samsung: fix assembly syntax for new gasArnd Bergmann
commit 2815774bb38445006074e16251b9ef5123bdc616 upstream. Recent assembler versions complain about extraneous whitespace inside [] brackets. This fixes all of these instances for the samsung platforms. We should backport this to all kernels that might need to be built with new binutils. arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]' arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]' arch/arm/mach-s3c24xx/sleep-s3c2410.S: Assembler messages: arch/arm/mach-s3c24xx/sleep-s3c2410.S:48: Error: ARM register expected -- `ldr r7,[ r4 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:49: Error: ARM register expected -- `ldr r8,[ r5 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:50: Error: ARM register expected -- `ldr r9,[ r6 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:64: Error: ARM register expected -- `streq r7,[ r4 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:65: Error: ARM register expected -- `streq r8,[ r5 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:66: Error: ARM register expected -- `streq r9,[ r6 ]' arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/mach-s3c24xx/pm-h1940.S: Assembler messages: arch/arm/mach-s3c24xx/pm-h1940.S:33: Error: ARM register expected -- `ldr pc,[ r0,#((0x0B8)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000)))]' arch/arm/mach-s3c24xx/sleep-s3c2412.S: Assembler messages: arch/arm/mach-s3c24xx/sleep-s3c2412.S:60: Error: ARM register expected -- `ldrne r9,[ r1 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:61: Error: ARM register expected -- `strne r9,[ r1 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:62: Error: ARM register expected -- `ldrne r9,[ r2 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:63: Error: ARM register expected -- `strne r9,[ r2 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:64: Error: ARM register expected -- `ldrne r9,[ r3 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:65: Error: ARM register expected -- `strne r9,[ r3 ]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: at91/DT: remove atmel,use-dma-* from 9x5 and 9n12 USART nodesNicolas Ferre
commit c3f0f282d950a1e87496a2633ed9e924e275ff8c upstream. Fix the use of USART on both at91sam9x5 and at91sam9n12. In DTS, the atmel,use-dma-[rx|tx] property is present but a DMA channel cannot be used. Indeed the connexion between the DMA engine and the slave is not implemented yet in Device Tree. Note however that this property is also used for PDC (private DMA) on older SoCs. This is why the driver alone cannot determine the validity of this property. Reported-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: PXA3xx: program the CSMSADRCFG registerIgor Grinberg
commit d107a204154ddd79339203c2deeb7433f0cf6777 upstream. The Chip Select Configuration Register must be programmed to 0x2 in order to achieve the correct behavior of the Static Memory Controller. Without this patch devices wired to DFI and accessed through SMC cannot be accessed after resume from S2. Do not rely on the boot loader to program the CSMSADRCFG register by programming it in the kernel smemc module. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: 7635/1: versatile: fix the PCI IRQ regressionLinus Walleij
commit e3e92a7be6936dff1de80e66b0b683d54e9e02d8 upstream. The PCI IRQs were regressing due to two things: - The PCI glue layer was using an hard-coded IRQ 27 offset. This caused the immediate regression. - The SIC IRQ mask was inverted (i.e. a bit was indeed set to one for each valid IRQ on the SIC, but accidentally inverted in the init call). This has been around forever, but we have been saved by some other forgiving code that would reserve IRQ descriptors in this range, as the versatile is non-sparse. When the IRQs were bumped up 32 steps so as to avoid using IRQ zero and avoid touching the 16 legacy IRQs, things broke. Introduce an explicit valid mask for the IRQs that are active on the PIC/SIC, and pass that. Use the BIT() macro from <linux/bitops.h> to make sure we hit the right bits, readily defined in <mach/platform.h>. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sparc64: Fix huge PMD to PTE translation for sun4u in TLB miss handler.David S. Miller
[ Upstream commit 76968ad2eac6456270353de168b21f04f4b3d1d3 ] When we set the sun4u version of the PTE execute bit, it's: or REG, _PAGE_EXEC_4U, REG _PAGE_EXEC_4U is 0x1000, unfortunately the immedate field of the 'or' instruction is a signed 13-bit value. So the above actually assembles into: or REG, -4096, REG completely corrupting the final PTE value. Set it with a: sethi %hi(_PAGE_EXEC_4U), TMP or REG, TMP, REG sequence instead. This fixes "git gc" crashes on sun4u machines. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sparc64: Fix tsb_grow() in atomic context.David S. Miller
[ Upstream commit 0fbebed682ff2788dee58e8d7f7dda46e33aa10b ] If our first THP installation for an MM is via the set_pmd_at() done during khugepaged's collapsing we'll end up in tsb_grow() trying to do a GFP_KERNEL allocation with several locks held. Simply using GFP_ATOMIC in this situation is not the best option because we really can't have this fail, so we'd really like to keep this an order 0 GFP_KERNEL allocation if possible. Also, doing the TSB allocation from khugepaged is a really bad idea because we'll allocate it potentially from the wrong NUMA node in that context. So what we do is defer the hugepage TSB allocation until the first TLB miss we take on a hugepage. This is slightly tricky because we have to handle two unusual cases: 1) Taking the first hugepage TLB miss in the window trap handler. We'll call the winfix_trampoline when that is detected. 2) An initial TSB allocation via TLB miss races with a hugetlb fault on another cpu running the same MM. We handle this by unconditionally loading the TSB we see into the current cpu even if it's non-NULL at hugetlb_setup time. Reported-by: Meelis Roos <mroos@ut.ee> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sparc64: Handle hugepage TSB being NULL.David S. Miller
[ Upstream commit bcd896bae0166b4443503482a26ecf84d9ba60ab ] Accomodate the possibility that the TSB might be NULL at the point that update_mmu_cache() is invoked. This is necessary because we will sometimes need to defer the TSB allocation to the first fault that happens in the 'mm'. Seperate out the hugepage PTE test into a seperate function so that the logic is clearer. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sparc64: Fix gfp_flags setting in tsb_grow().David S. Miller
[ Upstream commit a55ee1ff751f88252207160087d8197bb7538d4c ] We should "|= more_flags" rather than "= more_flags". Reported-by: David Rientjes <rientjes@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28s390/kvm: Fix store status for ACRS/FPRSChristian Borntraeger
commit 15bc8d8457875f495c59d933b05770ba88d1eacb upstream. On store status we need to copy the current state of registers into a save area. Currently we might save stale versions: The sie state descriptor doesnt have fields for guest ACRS,FPRS, those registers are simply stored in the host registers. The host program must copy these away if needed. We do that in vcpu_put/load. If we now do a store status in KVM code between vcpu_put/load, the saved values are not up-to-date. Lets collect the ACRS/FPRS before saving them. This also fixes some strange problems with hotplug and virtio-ccw, since the low level machine check handler (on hotplug a machine check will happen) will revalidate all registers with the content of the save area. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28xen: Send spinlock IPI to all waitersStefan Bader
commit 76eaca031f0af2bb303e405986f637811956a422 upstream. There is a loophole between Xen's current implementation of pv-spinlocks and the scheduler. This was triggerable through a testcase until v3.6 changed the TLB flushing code. The problem potentially is still there just not observable in the same way. What could happen was (is): 1. CPU n tries to schedule task x away and goes into a slow wait for the runq lock of CPU n-# (must be one with a lower number). 2. CPU n-#, while processing softirqs, tries to balance domains and goes into a slow wait for its own runq lock (for updating some records). Since this is a spin_lock_irqsave in softirq context, interrupts will be re-enabled for the duration of the poll_irq hypercall used by Xen. 3. Before the runq lock of CPU n-# is unlocked, CPU n-1 receives an interrupt (e.g. endio) and when processing the interrupt, tries to wake up task x. But that is in schedule and still on_cpu, so try_to_wake_up goes into a tight loop. 4. The runq lock of CPU n-# gets unlocked, but the message only gets sent to the first waiter, which is CPU n-# and that is busily stuck. 5. CPU n-# never returns from the nested interruption to take and release the lock because the scheduler uses a busy wait. And CPU n never finishes the task migration because the unlock notification only went to CPU n-#. To avoid this and since the unlocking code has no real sense of which waiter is best suited to grab the lock, just send the IPI to all of them. This causes the waiters to return from the hyper- call (those not interrupted at least) and do active spinlocking. BugLink: http://bugs.launchpad.net/bugs/1011792 Acked-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28x86: Hyper-V: register clocksource only if its advertisedOlaf Hering
commit 32068f6527b8f1822a30671dedaf59c567325026 upstream. Enable hyperv_clocksource only if its advertised as a feature. XenServer 6 returns the signature which is checked in ms_hyperv_platform(), but it does not offer all features. Currently the clocksource is enabled unconditionally in ms_hyperv_init_platform(), and the result is a hanging guest. Hyper-V spec Bit 1 indicates the availability of Partition Reference Counter. Register the clocksource only if this bit is set. The guest in question prints this in dmesg: [ 0.000000] Hypervisor detected: Microsoft HyperV [ 0.000000] HyperV: features 0x70, hints 0x0 This bug can be reproduced easily be setting 'viridian=1' in a HVM domU .cfg file. A workaround without this patch is to boot the HVM guest with 'clocksource=jiffies'. Signed-off-by: Olaf Hering <olaf@aepfle.de> Link: http://lkml.kernel.org/r/1359940959-32168-1-git-send-email-kys@microsoft.com Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28x86-32, mm: Remove reference to alloc_remap()H. Peter Anvin
commit 07f4207a305c834f528d08428df4531744e25678 upstream. We have removed the remap allocator for x86-32, and x86-64 never had it (and doesn't need it). Remove residual reference to it. Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/CAE9FiQVn6_QZi3fNQ-JHYiR-7jeDJ5hT0SyT_%2BzVvfOj=PzF3w@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28x86-32, mm: Remove reference to resume_map_numa_kva()H. Peter Anvin
commit bb112aec5ee41427e9b9726e3d57b896709598ed upstream. Remove reference to removed function resume_map_numa_kva(). Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28x86-32, mm: Rip out x86_32 NUMA remapping codeDave Hansen
commit f03574f2d5b2d6229dcdf2d322848065f72953c7 upstream. This code was an optimization for 32-bit NUMA systems. It has probably been the cause of a number of subtle bugs over the years, although the conditions to excite them would have been hard to trigger. Essentially, we remap part of the kernel linear mapping area, and then sometimes part of that area gets freed back in to the bootmem allocator. If those pages get used by kernel data structures (say mem_map[] or a dentry), there's no big deal. But, if anyone ever tried to use the linear mapping for these pages _and_ cared about their physical address, bad things happen. For instance, say you passed __GFP_ZERO to the page allocator and then happened to get handed one of these pages, it zero the remapped page, but it would make a pte to the _old_ page. There are probably a hundred other ways that it could screw with things. We don't need to hang on to performance optimizations for these old boxes any more. All my 32-bit NUMA systems are long dead and buried, and I probably had access to more than most people. This code is causing real things to break today: https://lkml.org/lkml/2013/1/9/376 I looked in to actually fixing this, but it requires surgery to way too much brittle code, as well as stuff like per_cpu_ptr_to_phys(). [ hpa: Cc: this for -stable, since it is a memory corruption issue. However, an alternative is to simply mark NUMA as depends BROKEN rather than EXPERIMENTAL in the X86_32 subclause... ] Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-15Merge tag 'stable/for-linus-3.8-rc7-tag-two' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes: - A simple bug-fix for redundant NULL check. - CVE-2013-0228/XSA-42: x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS and two reverts: - Revert the PVonHVM kexec. The patch introduces a regression with older hypervisor stacks, such as Xen 4.1." * tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: Revert "xen PVonHVM: use E820_Reserved area for shared_info" Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info" xen: remove redundant NULL check before unregister_and_remove_pcpu(). x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
2013-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "A couple small fixes for sparc including some THP brown-paper-bag material: 1) During the merging of all the THP support for various architectures, sparc missed adding a HAVE_ARCH_TRANSPARENT_HUGEPAGE to it's Kconfig, oops. 2) Sparc needs to be mindful of hugepages in get_user_pages_fast(). 3) Fix memory leak in SBUS probe, from Cong Ding. 4) The sunvdc virtual disk client driver has a test of the bitmask of vdisk server supported operations which was off by one bit" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: Fix off-by-one in generic_request(). sparc64: Fix get_user_pages_fast() wrt. THP. sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE. sparc: kernel/sbus.c: fix memory leakage
2013-02-14Revert "xen PVonHVM: use E820_Reserved area for shared_info"Konrad Rzeszutek Wilk
This reverts commit 9d02b43dee0d7fb18dfb13a00915550b1a3daa9f. We are doing this b/c on 32-bit PVonHVM with older hypervisors (Xen 4.1) it ends up bothing up the start_info. This is bad b/c we use it for the time keeping, and the timekeeping code loops forever - as the version field never changes. Olaf says to revert it, so lets do that. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-14Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info"Konrad Rzeszutek Wilk
This reverts commit a7be94ac8d69c037d08f0fd94b45a593f1d45176. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-13efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameterSatoru Takeuchi
There was a serious problem in samsung-laptop that its platform driver is designed to run under BIOS and running under EFI can cause the machine to become bricked or can cause Machine Check Exceptions. Discussion about this problem: https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 https://bugzilla.kernel.org/show_bug.cgi?id=47121 The patches to fix this problem: efi: Make 'efi_enabled' a function to query EFI facilities 83e68189745ad931c2afd45d8ee3303929233e7f samsung-laptop: Disable on EFI hardware e0094244e41c4d0c7ad69920681972fc45d8ce34 Unfortunately this problem comes back again if users specify "noefi" option. This parameter clears EFI_BOOT and that driver continues to run even if running under EFI. Refer to the document, this parameter should clear EFI_RUNTIME_SERVICES instead. Documentation/kernel-parameters.txt: =============================================================================== ... noefi [X86] Disable EFI runtime services support. ... =============================================================================== Documentation/x86/x86_64/uefi.txt: =============================================================================== ... - If some or all EFI runtime services don't work, you can try following kernel command line parameters to turn off some or all EFI runtime services. noefi turn off all EFI runtime services ... =============================================================================== Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Link: http://lkml.kernel.org/r/511C2C04.2070108@jp.fujitsu.com Cc: Matt Fleming <matt.fleming@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-13x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.Jan Beulich
This fixes CVE-2013-0228 / XSA-42 Drew Jones while working on CVE-2013-0190 found that that unprivileged guest user in 32bit PV guest can use to crash the > guest with the panic like this: ------------- general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/vbd-51712/block/xvda/dev Modules linked in: sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 xen_netfront ext4 mbcache jbd2 xen_blkfront dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 1250, comm: r Not tainted 2.6.32-356.el6.i686 #1 EIP: 0061:[<c0407462>] EFLAGS: 00010086 CPU: 0 EIP is at xen_iret+0x12/0x2b EAX: eb8d0000 EBX: 00000001 ECX: 08049860 EDX: 00000010 ESI: 00000000 EDI: 003d0f00 EBP: b77f8388 ESP: eb8d1fe0 DS: 0000 ES: 007b FS: 0000 GS: 00e0 SS: 0069 Process r (pid: 1250, ti=eb8d0000 task=c2953550 task.ti=eb8d0000) Stack: 00000000 0027f416 00000073 00000206 b77f8364 0000007b 00000000 00000000 Call Trace: Code: c3 8b 44 24 18 81 4c 24 38 00 02 00 00 8d 64 24 30 e9 03 00 00 00 8d 76 00 f7 44 24 08 00 00 02 80 75 33 50 b8 00 e0 ff ff 21 e0 <8b> 40 10 8b 04 85 a0 f6 ab c0 8b 80 0c b0 b3 c0 f6 44 24 0d 02 EIP: [<c0407462>] xen_iret+0x12/0x2b SS:ESP 0069:eb8d1fe0 general protection fault: 0000 [#2] ---[ end trace ab0d29a492dcd330 ]--- Kernel panic - not syncing: Fatal exception Pid: 1250, comm: r Tainted: G D --------------- 2.6.32-356.el6.i686 #1 Call Trace: [<c08476df>] ? panic+0x6e/0x122 [<c084b63c>] ? oops_end+0xbc/0xd0 [<c084b260>] ? do_general_protection+0x0/0x210 [<c084a9b7>] ? error_code+0x73/ ------------- Petr says: " I've analysed the bug and I think that xen_iret() cannot cope with mangled DS, in this case zeroed out (null selector/descriptor) by either xen_failsafe_callback() or RESTORE_REGS because the corresponding LDT entry was invalidated by the reproducer. " Jan took a look at the preliminary patch and came up a fix that solves this problem: "This code gets called after all registers other than those handled by IRET got already restored, hence a null selector in %ds or a non-null one that got loaded from a code or read-only data descriptor would cause a kernel mode fault (with the potential of crashing the kernel as a whole, if panic_on_oops is set)." The way to fix this is to realize that the we can only relay on the registers that IRET restores. The two that are guaranteed are the %cs and %ss as they are always fixed GDT selectors. Also they are inaccessible from user mode - so they cannot be altered. This is the approach taken in this patch. Another alternative option suggested by Jan would be to relay on the subtle realization that using the %ebp or %esp relative references uses the %ss segment. In which case we could switch from using %eax to %ebp and would not need the %ss over-rides. That would also require one extra instruction to compensate for the one place where the register is used as scaled index. However Andrew pointed out that is too subtle and if further work was to be done in this code-path it could escape folks attention and lead to accidents. Reviewed-by: Petr Matousek <pmatouse@redhat.com> Reported-by: Petr Matousek <pmatouse@redhat.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-13sparc64: Fix get_user_pages_fast() wrt. THP.David S. Miller
Mostly mirrors the s390 logic, as unlike x86 we don't need the SetPageReferenced() bits. On sparc64 we also lack a user/privileged bit in the huge PMDs. In order to make this work for THP and non-THP builds, some header file adjustments were necessary. Namely, provide the PMD_HUGE_* bit defines and the pmd_large() inline unconditionally rather than protected by TRANSPARENT_HUGEPAGE. Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE.David S. Miller
This got missed in the cleanups done for the S390 THP support. CC: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "One (hopefully) last batch of x86 fixes. You asked for the patch by patch justifications, so here they are: x86, MCE: Retract most UAPI exports This one unexports from userspace a bunch of definitions which should never have been exported. We really don't want to create an accidental legacy here. x86, doc: Add a bootloader ID for OVMF This is a documentation-only patch, just recording the official assignment of a boot loader ID. x86: Do not leak kernel page mapping locations Security: avoid making it needlessly easy for user space to probe the kernel memory layout. x86/mm: Check if PUD is large when validating a kernel address Prevent failures using /proc/kcore when using 1G pages. x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems Works around a BIOS problem causing boot failures on affected hardware." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Check if PUD is large when validating a kernel address x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems x86, doc: Add a bootloader ID for OVMF x86: Do not leak kernel page mapping locations x86, MCE: Retract most UAPI exports
2013-02-13x86/mm: Check if PUD is large when validating a kernel addressMel Gorman
A user reported the following oops when a backup process reads /proc/kcore: BUG: unable to handle kernel paging request at ffffbb00ff33b000 IP: [<ffffffff8103157e>] kern_addr_valid+0xbe/0x110 [...] Call Trace: [<ffffffff811b8aaa>] read_kcore+0x17a/0x370 [<ffffffff811ad847>] proc_reg_read+0x77/0xc0 [<ffffffff81151687>] vfs_read+0xc7/0x130 [<ffffffff811517f3>] sys_read+0x53/0xa0 [<ffffffff81449692>] system_call_fastpath+0x16/0x1b Investigation determined that the bug triggered when reading system RAM at the 4G mark. On this system, that was the first address using 1G pages for the virt->phys direct mapping so the PUD is pointing to a physical address, not a PMD page. The problem is that the page table walker in kern_addr_valid() is not checking pud_large() and treats the physical address as if it was a PMD. If it happens to look like pmd_none then it'll silently fail, probably returning zeros instead of real data. If the data happens to look like a present PMD though, it will be walked resulting in the oops above. This patch adds the necessary pud_large() check. Unfortunately the problem was not readily reproducible and now they are running the backup program without accessing /proc/kcore so the patch has not been validated but I think it makes sense. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.coM> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20130211145236.GX21389@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into akpm Pull s390 regression fix from Martin Schwidefsky: "The recent fix for the s390 sched_clock() function uncovered yet another bug in s390_next_ktime which causes an endless loop in KVM. This regression should be fixed before v3.8. I keep the fingers crossed that this is the last one for v3.8." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/timer: avoid overflow when programming clock comparator
2013-02-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu into akpm Pull m68knommu fix from Greg Ungerer: "This contains a single critical fix for the non-MMU m68k platforms. The change of the kernel exec code path has revealed a problem in the start thread code that causes crashing on boot. This is the fix for it." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix trap on execing /bin/init
2013-02-12Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile into akpm Pull tile bugfixes from Chris Metcalf: "This includes a variety of minor bug fixes, mostly to do with testing "make allyesconfig", "make allmodconfig", "make allnoconfig", inspired to Tejun Heo's observation about Kconfig.freezer not being included. The largest changes are just syntax changes removing the tile-specific use of a macro named INT_MASK, which is way too commonly redefined throughout driver code" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: tag some code with #ifdef CONFIG_COMPAT tile: fix memcpy_*io functions for allnoconfig tile: export a handful of symbols appropriately drm: fix compile failure by including <linux/swiotlb.h> tile: avoid defining INT_MASK macro in <arch/interrupts.h> tile: provide "screen_info" when enabling VT drivers/input/joystick/analog.c: enable precise timer tile: include kernel/Kconfig.freezer in tile Kconfig tile: remove an unused variable in copy_thread()
2013-02-11x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systemsStoney Wang
When a HP ProLiant DL980 G7 Server boots a regular kernel, there will be intermittent lost interrupts which could result in a hang or (in extreme cases) data loss. The reason is that this system only supports x2apic physical mode, while the kernel boots with a logical-cluster default setting. This bug can be worked around by specifying the "x2apic_phys" or "nox2apic" boot option, but we want to handle this system without requiring manual workarounds. The BIOS sets ACPI_FADT_APIC_PHYSICAL in FADT table. As all apicids are smaller than 255, BIOS need to pass the control to the OS with xapic mode, according to x2apic-spec, chapter 2.9. Current code handle x2apic when BIOS pass with xapic mode enabled: When user specifies x2apic_phys, or FADT indicates PHYSICAL: 1. During madt oem check, apic driver is set with xapic logical or xapic phys driver at first. 2. enable_IR_x2apic() will enable x2apic_mode. 3. if user specifies x2apic_phys on the boot line, x2apic_phys_probe() will install the correct x2apic phys driver and use x2apic phys mode. Otherwise it will skip the driver will let x2apic_cluster_probe to take over to install x2apic cluster driver (wrong one) even though FADT indicates PHYSICAL, because x2apic_phys_probe does not check FADT PHYSICAL. Add checking x2apic_fadt_phys in x2apic_phys_probe() to fix the problem. Signed-off-by: Stoney Wang <song-bo.wang@hp.com> [ updated the changelog and simplified the code ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1360263182-16226-1-git-send-email-yinghai@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-09Merge tag 'highbank-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into fixes From Rob Herring: highbank fixes for 3.8 -Compile fix for !SMP -More cpu cluster id related fixes * tag 'highbank-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux: ARM: highbank: mask cluster id from cpu_logical_map ARM: scu: mask cluster id from cpu_logical_map ARM: scu: add empty scu_enable for !CONFIG_SMP
2013-02-09Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "I was going to hold these off until v3.8 was out, and send them with a stable tag, but as everyone else is pushing much bigger fixes which Linus is accepting, let's save people from the hastle of having to patch v3.8 back into working or use a stable kernel. Looking at the diffstat, this really is high value for its size; this is miniscule compared to how the -rc6 to tip diffstat currently looks. So, four patches in this set: - Punit Agrawal reports that the kernel no longer boots on MPCore due to a new assumption made in the GIC code which isn't true of earlier GIC designs. This is the biggest change in this set. - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by the DT-ification of the GIC support without fixing up non-DT Realview - which now sees a greater number of interrupts than it did before. - A fix for the DMA coherent code from Marek which uses the wrong check for atomic allocations; this can result in spinlock lockups or other nasty effects. - A fix from Will, which will affect all Android based platforms if not applied (which use the 2G:2G VM split) - this causes particularly 'make' to misbehave unless this bug is fixed." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned ARM: DMA mapping: fix bad atomic test ARM: realview: ensure that we have sufficient IRQs available ARM: GIC: fix GIC cpumask initialization
2013-02-08tile: tag some code with #ifdef CONFIG_COMPATChris Metcalf
This allows us to disable COMPAT mode without a link error. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08tile: fix memcpy_*io functions for allnoconfigChris Metcalf
On tilepro without CONFIG_PCI, we can't provide inlines of these functions, as we don't have readl/writel. In addition, fix memset_io() signature to take a volatile void *. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08tile: export a handful of symbols appropriatelyChris Metcalf
This was shown up by running with "allmodconfig". I used EXPORT_SYMBOL() to match existing conventions in files that were already exporting symbols, or that were exported that way by other architectures, and otherwise EXPORT_SYMBOL_GPL(). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is alignedWill Deacon
We have received multiple reports of mmap failures when running with a 2:2 vm split. These manifest as either -EINVAL with a non page-aligned address (ending 0xaaa) or a SEGV, depending on the application. The issue is commonly observed in children of make, which appears to use bottom-up mmap (assumedly because it changes the stack rlimit). Further investigation reveals that this regression was triggered by 394ef6403abc ("mm: use vm_unmapped_area() on arm architecture"), whereby TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing get_unmapped_area to choke on misaligned addressed. This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of TASK_SIZE and explicitly aligns the result to 16M, matching the other end of the heap. Acked-by: Nicolas Pitre <nico@linaro.org> Reported-by: Steve Capper <steve.capper@arm.com> Reported-by: Jean-Francois Moine <moinejf@free.fr> Reported-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08ARM: DMA mapping: fix bad atomic testRussell King
Realview fails to boot with this warning: BUG: spinlock lockup suspected on CPU#0, init/1 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0 Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98) [<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198) [<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44) [<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c) [<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104) [<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454) [<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594) [<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44) [<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0) [<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c) [<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c) [<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54) [<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8) [<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8) [<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8) [<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568) [<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0) [<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288) [<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120) [<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c) [<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c) [<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4) [<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4) [<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240) [<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac) [<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150) [<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78) [<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c) This happens because the DMA allocation code is not respecting atomic allocations correctly. GFP flags should not be tested for GFP_ATOMIC to determine if an atomic allocation is being requested. GFP_ATOMIC is not a flag but a value. The GFP bitmask flags are all prefixed with __GFP_. The rest of the kernel tests for __GFP_WAIT not being set to indicate an atomic allocation. We need to do the same. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08ARM: realview: ensure that we have sufficient IRQs availableRussell King
Realview EB with a rev B MPcore tile results in lots of warnings at boot because it can't allocate enough IRQs. Fix this by increasing the number of available IRQs. WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec() Cannot allocate irq_descs @ IRQ96, assuming pre-allocated Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40) [<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140() Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140) [<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1d ]--- ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec() Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1e ]--- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08ARM: GIC: fix GIC cpumask initializationRussell King
Punit Agrawal reports: > I was trying to boot 3.8-rc5 on Realview EB 11MPCore using > realview-smp_defconfig as a starting point but the kernel failed to > progress past the log below (config attached). > > Pawel suggested I try reverting 384a290283f - "ARM: gic: use a private > mapping for CPU target interfaces" that you've authored. With this > commit reverted the kernel boots. > > I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd) > might be able to shed light on that. Some early GIC implementations return zero for the first distributor CPU routing register. This means we can't rely on that telling us which CPU interface we're connected to. We know that these platforms implement PPIs for IRQs 29-31 - but we shouldn't assume that these will always be populated. So, instead, scan for a non-zero CPU routing register in the first 32 IRQs and use that as our CPU mask. Reported-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08Merge tag 'pinctrl-for-v3.8-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull late pinctrl fixes from Linus Walleij: "Two patches appeared as of late, one was completely news to me, the other one was rotated in -next for the next merge window but turned out to be a showstopper. - Exynos Kconfig fixup - SIRF DT translation bug" * tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sirf: replace of_gpio_simple_xlate by sirf specific of_xlate pinctrl: exynos: change PINCTRL_EXYNOS option
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 21:26:12 +0000