summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2012-09-01nitrogen6x_defconfig: sync with non-Android settingsboundary-L3.0.35_MX6DQ_ER_1208-BetaEric Nelson
2012-08-31i.MX6: mx6q_sabrelite: add vwl1271 regulatorEric Nelson
2012-08-31i.MX6: mx6q_sabre_lite: add wl1271 interface on ESDHC2Eric Nelson
2012-08-31i.MX6: mx6q_sabrelite: add SD2+WiFi pad setupEric Nelson
2012-08-31nitrogen6x_defconfig: add supported hardware/featuresEric Nelson
2012-08-31i.MX6: mx6q_sabrelite: Add support for FocalTech ft5x06 driverEric Nelson
2012-08-31i.MX6Q: mx6q_sabrelite: Add TSC2004 touch screen supportEric Nelson
2012-08-31i.MX6: mx6q_sabrelite: Sabre Lite doesn't expose UART3, Nitrogen6W doesEric Nelson
2012-08-31i.MX6: mx6q_sabrelite: set up UART3 (/dev/ttymxc2) with RTS, CTS on pins EIM_...Eric Nelson
2012-08-31i.MX6Q: mx6q_sabrelite: fix SDHC write-protect pinsEric Nelson
2012-08-31i.MX6: mx6q_sabrelite: route SGTL5000 to audmux 3 on Nitrogen6Eric Nelson
2012-08-31i.MX6: mx6q_sabrelite: Add Nitrogen6W detectionEric Nelson
2012-08-31i.MX6: mx6q_sabrelite: swap SD cards to have numbering match U-BootEric Nelson
2012-08-31mx6qsabrelite: move HDMI to IPU0/DI1 to separate it from the parallel RGB dis...Eric Nelson
2012-08-31i.MX6Q: mx6q_sabrelite: Add PWM0 backlight (on DRGB connector)Eric Nelson
2012-08-31i.MX6: mx6q_sabrelite: add DVFS, MIPI_CSI2, PCIE, PERFMON to automatic Sabre-...Eric Nelson
2012-08-31mx6q_sabrelite: add pcie supportEric Nelson
2012-08-31i.MX6: mx6q_sabrelite: set MTD size for SPI Nor to match U-BootEric Nelson
2012-08-31mmc: esdhc: add caps flag to esdhc_platform_dataTroy Kisky
2012-08-31sabrelite: allow gigabit, 0 tx delay, set phy irqTroy Kisky
2012-08-31fix execute permissionsTroy Kisky
2012-08-28ENGR00221161 [MX6SL]- Add audio bus freq mode support.Ranjani Vaidyanathan
2012-08-28ENGR00221440 MX6x-Fix race-condition in checking bus_freq variablesRanjani Vaidyanathan
2012-08-28ENGR00221441 MX6SL - Update voltages based on the latest datasheet.Ranjani Vaidyanathan
2012-08-28ENGR00220796-3: imx6sl arm2/evk: Add platform_device for V4L2 supportRobby Cai
2012-08-28ENGR00221317-02 Mx6 USB host: set stop_mode_config when any USB host enabledmake shi
2012-08-28ENGR00221317-01 Mx6 USB host: set stop_mode_config when any USB host enabledmake shi
2012-08-28ENGR00221277 MX6DL/S - Set AXI clock to 270MHzRanjani Vaidyanathan
2012-08-28ENGR00221281 [MX6X] Fix BogoMIPS value is not correctNancy Chen
2012-08-28ENGR00221131: imx6sl arm2/evk: add mma8450q accelerometer supportRobby Cai
2012-08-28ENGR00221214 MX6Q/DL SabreSD: avoid pop-noise on audio padsGary Zhang
2012-08-28ENGR00221102-2 MX6Q: increase VPU frequence to 352MhzRobin Gong
2012-08-28ENGR00220989 [MX6SL]: DDR Controller measure unit workaroundNancy Chen
2012-08-28ENGR00220696 [MX6SL]-Reduce IDLE mode power consumption.Ranjani Vaidyanathan
2012-08-28ENGR00220776 mx6dl_arm2: ECSPI pin config overlaped by epdcRobin Gong
2012-08-28ENGR00220833 mx6sl: USB hsic: enable mx6sl hsic functionmake shi
2012-08-28ENGR00220370 [MX6]Fix BUS freq suspend/resume fail in low bus modeAnson Huang
2012-08-28ENGR00218789 mx6: clock: keep PLL3 enable and power bit all the timemake shi
2012-08-28ENGR00220818 [MX6SL] - Ensure the Enable bit is set for all the PLLs.Ranjani Vaidyanathan
2012-08-28ENGR00217687 [MX6SL_ARM2/EVK] Fix no perfmon directoryEric Sun
2012-08-28ENGR00220567 [MX6 SABRELite] No mxs-perfmon.0 directoryEric Sun
2012-08-28ENGR00220707 MX6Q/MX6DL: Fix build break due to MX6SL LPM codeRanjani Vaidyanathan
2012-08-28ENGR00220496 MX6SL:Add low power IDLE mode optimizations.Ranjani Vaidyanathan
2012-08-28ENGR00220027-2 mx6sl: add pad ctrl for audmux iomux settingGary Zhang
2012-08-28ENGR00220027-1 IOMUX: add api for special pad bits configurationGary Zhang
2012-08-28ENGR00220341-1 usb: add spin_lock_irqsave protect for pdata->lowpowerPeter Chen
2012-08-28ENGR00220512-2: mx6sl evk: keep NVCC_1V8 and NVCC_1.2V always onRobby Cai
2012-08-28ENGR00220512-1: mx6sl evk: change wm8962 codec 1.8V power source to VGEN3Gary Zhang
2012-08-28ENGR00220388 [MX6]Adjust SOC/PU voltage according to datasheetAnson Huang
2012-08-28ENGR00220497 [MX6Q, MX6DL]: Fix not able to set high bus freqNancy Chen
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-12 20:12:01 +0000