summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/imx/ipuv3-crtc.c
AgeCommit message (Collapse)Author
2019-07-10drm/imx: only send event on crtc disable if kept disabledRobert Beckett
commit 5aeab2bfc9ffa72d3ca73416635cb3785dfc076f upstream. The event will be sent as part of the vblank enable during the modeset if the crtc is not being kept disabled. Fixes: 5f2f911578fb ("drm/imx: atomic phase 3 step 1: Use atomic configuration") Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10drm/imx: notify drm core before sending event during crtc disableRobert Beckett
commit 78c68e8f5cd24bd32ba4ca1cdfb0c30cf0642685 upstream. Notify drm core before sending pending events during crtc disable. This fixes the first event after disable having an old stale timestamp by having drm_crtc_vblank_off update the timestamp to now. This was seen while debugging weston log message: Warning: computed repaint delay is insane: -8212 msec This occurred due to: 1. driver starts up 2. fbcon comes along and restores fbdev, enabling vblank 3. vblank_disable_fn fires via timer disabling vblank, keeping vblank seq number and time set at current value (some time later) 4. weston starts and does a modeset 5. atomic commit disables crtc while it does the modeset 6. ipu_crtc_atomic_disable sends vblank with old seq number and time Fixes: a474478642d5 ("drm/imx: fix crtc vblank state regression") Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16drm/imx: don't skip DP channel disable for background planeLucas Stach
[ Upstream commit 7bcde275eb1d0ac8793c77c7e666a886eb16633d ] In order to make sure that the plane color space gets reset correctly. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-07-27Merge tag 'imx-drm-next-2018-07-20' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-next drm/imx: cleanup and csi improvements - Remove the unused struct imx_drm_crtc and the unused pipes field from imx_drm_device and replace drm_dev_unref with drm_dev_put. - Extend CSI configuration to support RGB888 and BGR888 capture, as well as 16-bit RGB565 capture via a parallel bus. - Add CPMEM support for negative interlace offsets, which is necessary to support writing captured bottom-top interlaced fields to memory with interleaved lines. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1532100583.3438.9.camel@pengutronix.de
2018-07-16drm/imx: Remove last traces of struct imx_drm_crtcLeonard Crestez
When the definition of this struct was removed a forward declaration and an unused struct member were still left around. Remove them because they serve no purpose. Fixes 44b460cfe554 ("drm: imx: remove struct imx_drm_crtc and imx_drm_crtc_helper_funcs") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-02drm/imx: Use drm_plane_mask()Ville Syrjälä
Use drm_plane_mask() where appropriate. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-6-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-15drm/imx: move arming of the vblank event to atomic_flushLucas Stach
Right now the vblank event completion is racing with the atomic update, which is especially bad when the PRE is in use, as one of the hardware issue workaround might extend the atomic commit for quite some time. If the vblank IRQ happens to trigger during that time, we will prematurely signal the atomic commit completion to userspace, which causes tearing when userspace re-uses a framebuffer we haven't managed to flip away from yet. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-02drm/imx: switch to drm_*_get(), drm_*_put() helpersCihangir Akturk
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference() and drm_*_unreference() helpers. drm_*_reference() and drm_*_unreference() functions are just compatibility alias for drm_*_get() and drm_*_put() and should not be used by new code. So convert all users of compatibility functions to use the new APIs. Generated by: scripts/coccinelle/api/drm-get-put.cocci Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-06-30drm: Add old state pointer to CRTC .enable() helper functionLaurent Pinchart
The old state is useful for drivers that need to perform operations at enable time that depend on the transition between the old and new states. While at it, rename the operation to .atomic_enable() to be consistent with .atomic_disable(), as the .enable() operation is used by atomic helpers only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
2017-04-04drm/imx: merge imx-drm-core and ipuv3-crtc in one moduleLucas Stach
While it is possible to hook other CRTC implementations into imx-drm in practice there are none yet and the option to disable ipuv3-crtc support has been hidden for a long time. Now that the imx-drm-core has learned to deal with some of the specifics of IPUv3 there is a cyclic dependency between both parts. To get rid of this and to decimate the Kconfig maze a bit, simply merge both parts into one module. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-16drm/imx: enable/disable PRG on CRTC enable/disableLucas Stach
On i.MX6 QuadPlus the PRG needs to be clocked in order to pass through the data access requests from the IDMAC. This call is a no-op for other all other SoCs. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15drm/imx: add deferred plane disablingPhilipp Zabel
The DP (display processor) channel disable code tried to busy wait for the DP sync flow end interrupt status bit when disabling the partial plane without a full modeset. That never worked reliably, and it was disabled completely by the recent "gpu: ipu-v3: remove IRQ dance on DC channel disable" patch, causing ipu_wait_interrupt to always time out after 50 ms, which in turn would trigger a timeout in drm_atomic_helper_wait_for_vblanks. This patch changes ipu_plane_atomic_disable to only queue a DP channel register update at the next frame boundary and set a flag, which can be done without any waiting whatsoever. The imx_drm_atomic_commit_tail then calls a new ipu_plane_disable_deferred function that does the actual IDMAC teardown of the planes that are flagged for deferred disabling, after waiting for the vblank. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2017-02-09drm: imx: remove struct imx_drm_crtc and imx_drm_crtc_helper_funcsShawn Guo
With the vblank hooks in struct drm_crtc_funcs, we do not need to maintain the CRTC specific vblank callbacks with struct imx_drm_crtc_helper_funcs any more. By moving the stuff that we currently do in imx_drm_add_crtc(), like of_node setting and drm_crtc_helper_add()/drm_crtc_init_with_planes() invoking, we can kill things like struct imx_drm_crtc, imx_drm_crtc_helper_funcs and related functions completely. Functions ipu_enable_vblank() and ipu_disable_vblank() are moved around without changes, only for saving the forward declarations. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-13-git-send-email-shawnguo@kernel.org
2016-11-09drm/imx: disable planes before DCLucas Stach
If the DC clock is disabled before the attached IDMACs are properly stopped the IDMACs may hang the IPU or even the whole system. Make sure the IDMACs are in safe state by disabling the planes before removal of the DC clock. Also set the atomic parameter to false to stop calling the atomic_begin hook, which does nothing useful as we immediately afterwards turn off vblank interrupts and possibly send the pending vblank event. Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-09-28Merge tag 'v4.8-rc8' into drm-nextDave Airlie
Linux 4.8-rc8 There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge it now to avoid troubles. * tag 'v4.8-rc8': (1442 commits) Linux 4.8-rc8 fault_in_multipages_readable() throws set-but-unused error mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing radix tree: fix sibling entry handling in radix_tree_descend() radix tree test suite: Test radix_tree_replace_slot() for multiorder entries fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online mm: delete unnecessary and unsafe init_tlb_ubc() huge tmpfs: fix Committed_AS leak shmem: fix tmpfs to handle the huge= option properly blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx MIPS: Fix pre-r6 emulation FPU initialisation arm64: kgdb: handle read-only text / modules arm64: Call numa_store_cpu_info() earlier. locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text nvme-rdma: only clear queue flags after successful connect i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended perf/core: Limit matching exclusive events to one PMU ...
2016-08-30drm/imx: fix crtc vblank state regressionLucas Stach
The atomic conversion lost the notification to let the DRM core know about the current state of the CRTC vblank interrupts. This regressed the ability of the core to reject page flip attempts on currently disabled CRTCs. Add back the notifications. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29drm/imx: don't destroy mode objects manually on driver unbindLucas Stach
Instead let drm_mode_config_cleanup() do the work when taking down the master device. This requires all cleanup functions to be properly hooked up to the mode object .destroy callback. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29drm/imx: Use DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET flagLiu Ying
The IPUv3 display controller behind imx-drm needs all planes of a CRTC be disabled when the CRTC is disabled. The DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET flag reflects this hardware requirement. Let's use the flag for imx-drm. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29drm/imx: ipuv3-crtc: Use the callback ->atomic_disable instead of ->disableLiu Ying
Now that the drm atomic core supports the callback ->atomic_disable, we may replace the legacy one ->disable with it. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-15Merge tag 'topic/drm-misc-2016-08-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next - more fence destaging and cleanup (Gustavo&Sumit) - DRIVER_LEGACY to untangle from DRIVER_MODESET - drm_mm refactor (Chris) - fbdev-less compile fies - clipped plane src/dst rects (Ville) - + a few mediatek patches that build on top of that (Bibby+Daniel) - small stuff all over really * tag 'topic/drm-misc-2016-08-12' of git://anongit.freedesktop.org/drm-intel: (43 commits) dma-buf/fence: kerneldoc: remove spurious section header dma-buf/fence: kerneldoc: remove unused struct members Revert "gpu: drm: omapdrm: dss-of: add missing of_node_put after calling of_parse_phandle" drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION drm/radeon|amgpu: Make fbdev emulation optional drm/vmwgfx: select CONFIG_FB drm: Remove superflous linux/fb.h includes drm/fb-helper: Add a dummy remove_conflicting_framebuffers dma-buf/sync_file: only enable fence signalling on poll() Documentation: add doc for sync_file_get_fence() dma-buf/sync_file: add sync_file_get_fence() dma-buf/sync_file: refactor fence storage in struct sync_file dma-buf/fence-array: add fence_is_array() drm/dp_helper: Rate limit timeout errors from drm_dp_i2c_do_msg() drm/dp_helper: Print first error received on failure in drm_dp_dpcd_access() drm: Add ratelimited versions of the DRM_DEBUG* macros drm: Make sure drm_vblank_no_hw_counter isn't abused drm/mediatek: Fix mtk_atomic_complete for runtime_pm drm/mediatek: plane: Use FB's format's cpp to compute x offset drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update ...
2016-08-12drm: Remove superflous linux/fb.h includesDaniel Vetter
Everyone who uses the fbdev emulation helpers doesn't need to include fb.h directly. Remove it. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-3-git-send-email-daniel.vetter@ffwll.ch
2016-08-08drm/imx: Remove imx_drm_handle_vblank()Liu Ying
imx_drm_handle_vblank() is just a simple wrapper of drm_crtc_handle_vblank() without doing any thing fancy - drm_crtc_handle_vblank() can be called directly. So, let's remove the wrapper. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: turn remaining container_of macros into inline functionsPhilipp Zabel
This allows the compiler to do type checking. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: store internal bus configuration in crtc statePhilipp Zabel
The internal bus configuration is imx-drm specific crtc state. Store it in imx_crtc_state and let the encoder atomic_check callbacks determine bus_flags, bus_format and the sync pins, possibly taking into account the mode and the connector display info. The custom imx_drm_encoder structure can be replaced again with drm_encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 3 step 2: Legacy callback fixupsLiu Ying
Now that we can use atomic configurations, all the legacy callbacks of CRTCs, encoders and connectors can be switched to the atomic version. For the imx-ldb driver, there is a clock parent setting mismatch bewteen ->enable and ->disable after the switch, so a fixup is added. For the imx-tve driver, since the encoder's callback ->dpms is replaced by ->disable, we need to move the setting for the IPU_CLK_EN bit(in register TVE_COM_CONF_REG) from ->enable/->disable to ->mode_set, otherwise, the relevant CRTC cannot be disabled correctly with a warning on DC stop timeout. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 3 step 1: Use atomic configurationLiu Ying
Replacing drm_crtc_helper_set_config() by drm_atomic_helper_set_config() and converting the suspend/resume operations to atomic make us be able to use atomic configurations. All of these allow us to remove the crtc_funcs->mode_set callback as it is no longer used. Also, change the plane_funcs->update/disable_plane callbacks from the transitional version to the atomic version. Furthermore, switching to the pure atomic version of set_config callback means that we may implement CRTC/plane atomic checks by using the new CRTC/plane states instead of the legacy ones and we may remove the private ipu_crtc->enabled state which was left there for the transitional atomic helpers in phase 1. Page flip is also switched to the atomic version. Last, the legacy function drm_helper_disable_unused_functions() is removed from ->load in order not to confuse the atomic driver. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: Remove encoders' ->prepare callbacksLiu Ying
The main task of imx encoders' ->prepare callbacks is to set bus_format, bus_flags, di_vsync_pin and di_hsync_pin. We may create a structure named imx_encoder to cache them. The atomic encoder callback ->disable may replace ->prepare later, so let's remove ->prepare. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 2 step 2: Track plane_state->fb correctly in ->page_flipLiu Ying
Use drm_atomic_set_fb_for_plane() in the legacy ->page_flip path to track the pointer plane_state->fb correctly. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 2 step 1: Wire up state ->reset, ->duplicate and ->destroyLiu Ying
Wire up CRTCs', planes' and connectors' ->reset, ->duplicate and ->destroy state hooks to use the default implementations from the atomic helper library. The helpers track each DRM object state. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpersLiu Ying
Use the drm_plane_helper_update/disable() and drm_helper_crtc_mode_set() transitional atomic helpers. The crtc->mode_set_nofb callback is added so that the primary plane is no longer tied to the CRTC. Check/update logics are separated to make sure crtc->mode_set_nofb and plane->atomic_update are always successful. Also, some necessary logics are tweaked for a smooth transition. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: use bus_flags for pixel clock polarityPhilipp Zabel
This patch allows panels to set pixel clock and data enable pin polarity other than the default of driving data at the falling pixel clock edge and active high display enable. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-23drm/imx: Match imx-ipuv3-crtc components using device node in platform dataPhilipp Zabel
The component master driver imx-drm-core matches component devices using their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during probing. Before that, of_node was set and caused an of: modalias to be used instead of the platform: modalias, which broke module autoloading. On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc probe function calls component_add, component matching in imx-drm-core fails. While dev->of_node will be set once the next component tries to bring up the component master, imx-drm-core component binding will never succeed if one of the crtc devices is probed last. Add of_node to the component platform data and match against the pdata->of_node instead of dev->of_node in imx-drm-core to work around this problem. Cc: <stable@vger.kernel.org> # 4.4.x Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
2016-03-14Merge drm-fixes into drm-next.Dave Airlie
Nouveau wanted this to avoid some worse conflicts when I merge that.
2016-03-01drm/imx: only enable vblank IRQs when neededLucas Stach
The vblank IRQ is only needed to trigger page flip work, so we might as well disable it when there is no work to do. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01drm/imx: implement fence syncLucas Stach
If the FB is backed by a GEM object with an dma-buf attached we need to wait for any pending fences to signal before executing the page flip. The implementation is straight forward by deferring the flip to a workqueue in that case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01drm/imx: keep GEM object referenced as long as scanout is activeLucas Stach
The DRM core only references the currently queued/active framebuffer. So there is a period of time where the flip is not completed, but the GEM object backing the FB is already unreferenced and could be destroyed if userspace closes its handle. Make sure to keep a reference to the GEM object until the flip is actually executed clean things up in a worker running behind the flip execution. Also move the page flip event into the context of this worker, so it gets cleaned up automatically. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01drm/imx: track flip state explicitlyLucas Stach
Start tracking the flip state explicitly, as opposed to inferring it from the presence if a new FB. This is a preparatory step to introduce an new immediate state, where we can wait for a fence to signal. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-01drm/imx: don't touch primary fb on pageflipLucas Stach
The core already does the correct replacemet if the driver page flip function returns without an error, so there is no need to do it here. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-10drm/imx: notify DRM core about CRTC vblank stateLucas Stach
Make sure the DRM core is aware that there will be no vblank interrupts incoming if the CRTC is disabled. That way the core will reject any attempts from userspace to wait on a vblank event on a disabled CRTC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-08drm/imx: Unconfuse preclose logicDaniel Vetter
So this one is special, since it tries to prevent races when userspace crashes simply by disabling the vblank machinery. Well except that imx always has vblanks enabled, and the disable_vblank hook actually just tries to cancel a pending pageflip. Without any locking whatsoever. Of course this is wrong, since it'll result in the hw not actually displaying what drm thinks is the current frontbuffer. Well since the core takes care of the disappearing DRM fd now. So we can nuke all this confused code without ill side-effects. Someone else needs to audit the locking for ->newfb and ->page_flip_event and fix it up. Common approach is to reuse dev->event_lock for this. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-7-git-send-email-daniel.vetter@ffwll.ch
2015-12-15drm/imx: Constify function pointer structsVille Syrjälä
Moves a bunch of junk to .rodata from .data. drivers/gpu/drm/imx/imxdrm.ko: -.rodata 624 +.rodata 652 -.data 372 +.data 344 drivers/gpu/drm/imx/imx-ipuv3-crtc.ko: -.rodata 224 +.rodata 280 -.data 184 +.data 128 drivers/gpu/drm/imx/imx-ldb.ko: -.rodata 660 +.rodata 784 -.data 240 +.data 116 drivers/gpu/drm/imx/imx-tve.ko: -.rodata 400 +.rodata 524 -.data 416 +.data 292 drivers/gpu/drm/imx/parallel-display.ko: -.rodata 400 +.rodata 524 -.data 216 +.data 92 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-22-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-25drm: imx: convert to drm_crtc_send_vblank_event()Russell King
ipu_crtc_handle_pageflip() was calling drm_send_vblank_event() with a pipe argument of -1. Commit cc1ef118fc09 ("drm/irq: Make pipe unsigned and name consistent") now makes this error obvious, as we now may get a warning from: if (WARN_ON(pipe >= dev->num_crtcs)) in drm_vblank_count_and_time(). Prior to this change, we would end up making out-of-bounds array accesses via: struct drm_vblank_crtc *vblank = &dev->vblank[crtc]; and *vblanktime = vblanktimestamp(dev, pipe, cur_vblank); So, this has been broken for a very long time, and is not a result of the above commit. Since we don't care about the staging versions, I've tagged this with the earliest mainline commit where we do care, even though this commit did not introduce the bug. Fixes: 6556f7f82b9c ("drm: imx: Move imx-drm driver out of staging") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-24drm/imx: Remove of_node assignment from ipuv3-crtc driver probePhilipp Zabel
The crtc child device driver shouldn't modify the of_node of its platform device in the probe function. Instead, since the previous patch, the IPU core driver sets the of_node when the platform device is created. Drop the now unused custom imx_drm_get_port_by_id function. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-11-19drm/imx: ipuv3-crtc: Return error if ipu_plane_init() fails for primary planeLiu Ying
For primary plane initialization failure cases, ipu_plane_init() may return a pointer encoded by ERR_PTR(). So, we should bailout instead of using that pointer blindly. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-19drm/imx: switch to universal planesPhilipp Zabel
Use drm_universal_plane_init to create the planes, create the primary plane first and use drm_crtc_init_with_planes to associate it with the crtc. This gets rid of the unused fallback primary plane previously created by drm_crtc_init and fixes a NULL pointer dereference issue that can be triggered by a modeset from userspace when fbdev helpers are enabled [1]. [1] https://lkml.org/lkml/2015/11/4/107 Reported-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Liu Ying <Ying.Liu@freescale.com>
2015-03-31drm/imx: consolidate bus format variable namesPhilipp Zabel
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt, and pixfmt variables to a common name "bus_format" wherever they describe the pixel format on the bus between display controller and encoder hardware. At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Emil Renner Berthing <kernel@esmil.dk>
2015-03-31drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2Philipp Zabel
This patch allows the IPU to divide the 27 MHz input clock from the TVE by two to obtain the 13.5 MHz pixel clock needed for NTSC/PAL SD modes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-03-31drm/imx: Add support for interlaced scanoutPhilipp Zabel
This patch allows interlaced frame buffer scanout for interlaced output via HDMI or TV-Encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()Russell King
We do not need to track the state of the IPU DI's clock flags by having each display bridge calling back into imx-drm-core, and then back out into ipuv3-crtc.c. ipuv3-crtc can instead just scan the list of encoders to retrieve their type, and build up a picture of which types of encoders are attached. We can then use this information to configure the IPU DI clocking mode without any uncertainty - if we have multiple bridges connected to the same DI, if one of them requires a synchronous DI clock, that's what we must use. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfgSteve Longerbeam
This patch changes struct ipu_di_signal_cfg to use struct videomode to define video timings and flags. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-05 06:09:16 +0000