summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/nouveau
AgeCommit message (Collapse)Author
2011-06-07drm/nv40: fall back to paged dma object for the momentBen Skeggs
PCI(E)GART isn't quite stable it seems, fall back to old method until I get the time to sort it out properly. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nouveau: fix leak of gart mm nodeBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nouveau: fix vram page mapping when crossing page table boundariesBen Skeggs
Hopefully the cause of nvc0 "page jumping" issue. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901).Francisco Jerez
Reported-by: Mario Bachmann <grafgrimm77@gmx.de> Tested-by: Greg Turner <gmturner007@ameritech.net> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nouveau: don't create accel engine objects when noaccel=1Ben Skeggs
Fixes various potential oopses. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nvc0: recognise 0xdX chipsets as NV_C0Ben Skeggs
Should hopefully get modesetting at least from this, it appears these are GF119 chipsets. Accel will come eventually, once I order a board. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-24Merge branch 'drm-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits) drivers/gpu/drm/radeon/atom.c: fix warning drm/radeon/kms: bump kms version number drm/radeon/kms: properly set num banks for fusion asics drm/radeon/kms/atom: move dig phy init out of modesetting drm/radeon/kms/cayman: fix typo in register mask drm/radeon/kms: fix typo in spread spectrum code drm/radeon/kms: fix tile_config value reported to userspace on cayman. drm/radeon/kms: fix incorrect comparison in cayman setup code. drm/radeon/kms: add wait idle ioctl for eg->cayman drm/radeon/cayman: setup hdp to invalidate and flush when asked drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked agp/uninorth: Fix lockups with radeon KMS and >1x. drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices drm/radeon/kms: fixup eDP connector handling drm/radeon/kms: bail early for eDP in hotplug callback drm/radeon/kms: simplify hotplug handler logic drm/radeon/kms: rewrite DP handling drm/radeon/kms/atom: add support for setting DP panel mode drm/radeon/kms: atombios.h updates for DP panel mode ...
2011-05-16drm: fix nouveau_acpi buildRandy Dunlap
Fix build errors when CONFIG_ACPI is enabled but MXM_WMI is not enabled by selecting both MXM_WMI and ACPI_WMI (the latter just for kconfig dependencies): nouveau_acpi.c:(.text+0x2400c8): undefined reference to `mxm_wmi_call_mxmx' nouveau_acpi.c:(.text+0x2400cf): undefined reference to `mxm_wmi_call_mxds' nouveau_acpi.c:(.text+0x2400fe): undefined reference to `mxm_wmi_call_mxmx' nouveau_acpi.c:(.text+0x2402ba): undefined reference to `mxm_wmi_supported Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-16drm/nouveau: make cursor_set implementation consistent with other driversMarcin Slusarz
When xorg state tracker wants to hide the cursor it calls set_cursor with NULL buffer_handle and size=0x0, but nouveau refuses to hide it because size is not 64x64... which is a bit odd. Both radeon and intel check buffer_handle before validating size of cursor, so make nouveau implementation consistent with them. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nva3/clk: better pll calculation when no fractional fb div availableBen Skeggs
The core/mem/shader clocks don't support the fractional feedback divider, causing our calculated clocks to be off by quite a lot in some cases. To solve this we will switch to a search-based algorithm when fN is NULL. For my NVA8 at PL3, this actually generates identical cooefficients to the binary driver. Hopefully that's a good sign, and that does not break VPLL calculation for someone.. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau/pm: translate ramcfg strap through ram restrict tableBen Skeggs
Hopefully this is how we're supposed to correctly handle when the RAMCFG strap is above the number of entries in timing-related tables. It's rather difficult to confirm without finding a configuration where the ram restrict table doesn't map 8-15 back onto 0-7 anyway. There's not a single vbios in the repo which is configured differently.. In any case, this is probably still better than potentially reading outside of the bounds of various tables.. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nva3/pm: allow use of divisor 16Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/pm: parse clock for pll 0x0a (0x137020) from perf tableBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/pm: correct core/mem/shader perflvl parsingBen Skeggs
We need to parse some of these other entries still, but I've yet to determine exactly which PLLs the rest map to. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau/pm: remove memtiming support check when assigning to perflvlBen Skeggs
Really not necessary here, we want to be able to see if/how we managed to match a timingset to a performance level, even if we can't currently program it. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nva3: support for memory timing map tableBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: Associate memtimings with performance levels on cards <= nv98Martin Peres
v2 (Ben Skeggs): fix ramcfg strap, and remove bogus handling of perf 0x40 Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nva3/pm: initial pass at set_clock() hookBen Skeggs
I still discourage anyone from actually doing this yet. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/gr: calculate some more of our magic numbersBen Skeggs
Again, doesn't quite match NVIDIA's, but not sure it really matters. This will however, match the same rules we use to calculate the other related grctx magics. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv50: respect LVDS link count from EDID on SPWG panelsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: recognise DCB connector type 0x41 as LVDSBen Skeggs
After looking at a number of different logs, it appears 0x41 likely indicates the presense of an LVDS panel following the SPWG spec (http://www.spwg.org/) Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: fix uninitialised variable warningBen Skeggs
Looks like a false positive to me, but, anyways! Reported-by: Jimmy Rentz <jb17bsome@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: Fix a crash at card takedown for NV40 and older cardsJimmy Rentz
NV40 and older cards (pre NV50) reserve a vram bo for the vga memory at card init. This bo is then freed at card shutdown. The problem is that the ttm bo vram manager was already freed. So a crash occurs when the vga bo is freed. The fix is to free the vga bo prior to freeing the ttm bo vram manager. There might be other solutions but this seemed the simplest to me. Signed-off-by: Jimmy Rentz <jb17bsome@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: Free nv04 instmem ramin heap at card takedownJimmy Rentz
Add a missing nv04 instmem ramin heap shutdown call. Signed-off-by: Jimmy Rentz <jb17bsome@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nva3: somewhat improve clock reportingBen Skeggs
Definitely not 100% correct, but, for the configurations I've seen used it'll read back the correct clocks now. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: pull refclk from vbios on limits 0x40 boardsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv40/gr: oops, fix random bits getting set in engine objBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv50: improve nv50_pm_get_clock()Emil Velikov
Many of the nv50 cards have their shader and/or memory pll disabled at some stage. This patch addresses those cases, so that the function returns the correct frequency. When the shader pll is disabled, the blob reports 2*core clock Whereas for memory, the data stored in the vbios. This action is incorrect as some vbioses store a clock value that is less than the refference clock of the pll. Thus we are reporting the reff_clk as it is the frequency the pll actually operates v2 - Convert NV_INFO() messages to NV_DEBUG() Provide more information in the actuall message Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau/pm: fix compilation failure when CONFIG_POWER_SUPPLY is not setMartin Peres
Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr> Reported-by: Stratos Psomadakis <psomas@ece.ntua.gr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/fifo: stick user area into a gpuobj rather than a boBen Skeggs
Contents will now be preserved across a suspend, unlike a pinned bo Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/gr: no need to store context in graph_fini()Ben Skeggs
PFIFO kickoff should have handled this for us. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/fifo: restore context table on resumeBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/fifo: kick channels off during suspendBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/gr: better handling of fuc firmwareBen Skeggs
Allows per-chipset firmware to be installed, and keeps a copy in memory for suspend/resume purposes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv50: support PMPEG on original nv50Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv50: rename nv84_mpeg to nv50_mpegBen Skeggs
In preparation for adding 0x50 support. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv84: add support for PMPEGBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv40/vpe: add support for PMPEGBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0: implement support for copy enginesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nva3: implement support for copy engineBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: remove remnants of nouveau_pgraph_engineBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: fix suspend failure path to reinitialise all enginesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: remove remnants of nouveau_pgraph_engine from nouveau_channelBen Skeggs
The nouveau_wait_for_idle() call should hopefully not have been actually necessary, we *do* wait for the channel to go idle already. If it's an issue somehow, the chipset-specific hooks can wait for idle themselves before taking the lock. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nouveau: move set_tile_region to nouveau_exec_engineBen Skeggs
In the very least VPE (PMPEG and friends) also has this style of tile region regs, lets make them just work if/when they get added. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv04/gr: move to exec engine interfacesBen Skeggs
Like nv10-nv50, needs cleanup. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv10/gr: move to exec engine interfacesBen Skeggs
Like nv20-nv50, needs cleanup. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv20-nv30/gr: move to exec engine interfaceBen Skeggs
A bit of cleanup done along the way, but, like nv40/nv50, needs more. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv40/gr: move to exec engine interfacesBen Skeggs
Like nv50, this needs a good cleanup. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nvc0/gr: move to exec engine interfacesBen Skeggs
Much nicer to do that nv50, the code was pretty much written to expect such a change in the future. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-05-16drm/nv50/gr: move to exec engine interfacesBen Skeggs
This needs a massive cleanup, but to catch bugs from the interface changes vs the engine code cleanup, this will be done later. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-30 01:36:58 +0000