summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2014-04-08Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ...
2014-04-08DRM: armada: fix corruption while loading cursorsRussell King
Loading cursors to the LCD controller's SRAM can be corrupted when the configured pixel clock is relatively slow. This seems to be caused when we write back-to-back to the SRAM registers. There doesn't appear to be any status register we can read to check when an access has completed. Inserting a dummy read between the writes appears to fix the problem. Cc: <stable@vger.kernel.org> # 3.13 Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-05Merge tag 'drm-intel-fixes-2014-04-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Merge window -fixes pull request as usual. Well, I did sneak in Jani's drm_i915_private_t typedef removal, need to have fun with a big sed job too ;-) Otherwise: - hdmi interlaced fixes (Jesse&Ville) - pipe error/underrun/crc tracking fixes, regression in late 3.14-rc (but not cc: stable since only really relevant for igt runs) - large cursor wm fixes (Chris) - fix gpu turbo boost/throttle again, was getting stuck due to vlv rps patches (Chris+Imre) - fix runtime pm fallout (Paulo) - bios framebuffer inherit fix (Chris) - a few smaller things * tag 'drm-intel-fixes-2014-04-04' of git://anongit.freedesktop.org/drm-intel: (196 commits) Skip intel_crt_init for Dell XPS 8700 drm/i915: vlv: fix RPS interrupt mask setting Revert "drm/i915/vlv: fixup DDR freq detection per Punit spec" drm/i915: move power domain init earlier during system resume drm/i915: Fix the computation of required fb size for pipe drm/i915: don't get/put runtime PM at the debugfs forcewake file drm/i915: fix WARNs when reading DDI state while suspended drm/i915: don't read cursor registers on powered down pipes drm/i915: get runtime PM at i915_display_info drm/i915: don't read pp_ctrl_reg if we're suspended drm/i915: get runtime PM at i915_reg_read_ioctl drm/i915: don't schedule force_wake_timer at gen6_read drm/i915: vlv: reserve the GT power context only once during driver init drm/i915: prefer struct drm_i915_private to drm_i915_private_t drm/i915/overlay: prefer struct drm_i915_private to drm_i915_private_t drm/i915/ringbuffer: prefer struct drm_i915_private to drm_i915_private_t drm/i915/display: prefer struct drm_i915_private to drm_i915_private_t drm/i915/irq: prefer struct drm_i915_private to drm_i915_private_t drm/i915/gem: prefer struct drm_i915_private to drm_i915_private_t drm/i915/dma: prefer struct drm_i915_private to drm_i915_private_t ...
2014-04-05Merge tag 'drm/tegra/for-3.15-rc1' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v3.15-rc1 Implement eDP support for Tegra124 and support the PRIME vmap()/vunmap() operations. A symbol that is required for upcoming V4L2 support is now exported by the host1x driver. Relicense drivers under the GPL v2 for consistency. One exception is the public header file, which is relicensed under MIT to abide by the common rule. * tag 'drm/tegra/for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Use standard GPL v2 license text drm/tegra: Relicense under GPL v2 drm/tegra: Relicense public header under MIT drm/tegra: Add eDP support gpu: host1x: export host1x_syncpt_incr_max() function drm/tegra: prime: Add vmap support
2014-04-05Merge tag 'drm/panel/for-3.15-rc1' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/panel: Changes for v3.15-rc1 Add support for a couple more simple panels. A few cleanups to the simple panel driver are also included (gpiod interface conversion, removal of redundant call to regulator_disable()). * tag 'drm/panel/for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: add support for LG LD070WX3-SL01 panel drm/panel: add support for LG LH500WX1-SD03 panel drm/panel: simple: Allow DSI panels to provide mode flags drm/panel: simple: Allow GPIO accesses to sleep drm/panel: remove redundant regulator_disable() drm/panel: use gpiod interface for enable GPIO drm/panel: Add LG 12.9" LCD panel MAINTAINERS: Add entry for DRM panel drivers Conflicts: MAINTAINERS
2014-04-05Merge branch 'exynos-drm-next' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Summaries: - Add MIPI-DSI Driver, and dt bindigs - Add S6E8AA0 MIPI-DSI based panel drivers, and dt bindings - Add LD9040 parallel panel driver . this driver is placed in drivers/gpu/drm/panel, and it seems to be used for exynos drm as of now, - Some fixups Changelog v2: - Remove super device support, and relevant dt bindings for more reviews. - Fix module build errors you pointed out. - Re-based it to drm-next again. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages
2014-04-05Merge tag 'vmwgfx-next-2014-04-04' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next Pull request of 2014-04-04 The second vmwgfx pull request for the 3.15 merge window. Contains a fbdev fix by Christopher Friedt, one fix for a locking order violation introduced in 3.14 (hit when using queries) and finally a removal of the DRM_AUTH requirement around some vmwgfx IOCTLS where the caller is already required to have an open handle to the object. * tag 'vmwgfx-next-2014-04-04' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: correct fb_fix_screeninfo.line_length drm/vmwgfx: Remove authorization requirements around some more ioctls drm/vmwgfx: Fix query buffer locking order violation
2014-04-05Merge tag 'ttm-next-2014-04-04' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next Pull request of 2014-04-04 Currently only a single patch fixing up mixed use of the ttm_bo_reserve and ww_mutex APIs * tag 'ttm-next-2014-04-04' of git://people.freedesktop.org/~thomash/linux: drm/ttm: Hide the implementation details of reservation
2014-04-05drm/dp_helper: don't return EPROTO for defers (v2)Dave Airlie
If we get a msg.reply of REPLY_DEFER, we also get an err of 0 so we fail reads with 0 < size and return -EPROTO instead of trying again. v2: same fix in i2c code. Found writing MST support. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-04Merge tag 'fbdev-main-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev changes from Tomi Valkeinen: "Various fbdev fixes and improvements, but nothing big" * tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (38 commits) fbdev: Make the switch from generic to native driver less alarming Video: atmel: avoid the id of fix screen info is overwritten video: imxfb: Add DT default contrast control register property. video: atmel_lcdfb: ensure the hardware is initialized with the correct mode fbdev: vesafb: add dev->remove() callback fbdev: efifb: add dev->remove() callback video: pxa3xx-gcu: switch to devres functions video: pxa3xx-gcu: provide an empty .open call video: pxa3xx-gcu: pass around struct device * video: pxa3xx-gcu: rename some symbols sisfb: fix 1280x720 resolution support video: fbdev: uvesafb: Remove impossible code path in uvesafb_init_info video: fbdev: uvesafb: Remove redundant NULL check in uvesafb_remove fbdev: FB_OPENCORES should depend on HAS_DMA OMAPDSS: convert pixel clock to common videomode style OMAPDSS: Remove unused get_context_loss_count support OMAPDSS: use DISPC register to detect context loss video: da8xx-fb: Use "SIMPLE_DEV_PM_OPS" macro video: imxfb: Convert to SIMPLE_DEV_PM_OPS video: imxfb: Resolve mismatch between backlight/contrast ...
2014-04-04drm/bridge: export ptn3460_init functionInki Dae
This patch exports ptn3460_init function so that other modules can call this function. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-04-04drm/exynos: remove MODULE_DEVICE_TABLE definitionsInki Dae
This patch removes MODULE_DEVICE_TABLE definition to of_device_id of DP and MIPI-DSI drivers. Eyxnos drm should be built as single module so these definitions should be removed. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-04-04drm/panel: add S6E8AA0 driverAndrzej Hajda
The patch adds MIPI-DSI based S6E8AA0 AMOLED LCD panel driver. Driver uses mipi_dsi bus to communicate with panel and exposes drm_panel interface. v2 - added bus error handling, - set maxmimum DSI packet size on init, - removed unsupported brightness drm_panel callbacks, - minor improvements v3 - switched to gpiod framework, - minor fixes in error handling Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04drm/panel: add ld9040 driverAndrzej Hajda
The patch adds LD9040 parallel RGB panel driver with SPI control interface. The driver uses drm_panel framework. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04drm/exynos: add DSIM driverAndrzej Hajda
The patch adds driver for Exynos DSI master (DSIM). It is a platform driver which is registered as exynos_drm_display sub-driver of exynos_drm framework and implements DRM encoder/connector pair. It is also MIPI-DSI host driver and provides DSI bus for panels. It interacts with its panel(s) using drm_panel framework. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04drm/exynos: disallow fbdev initialization if no device is connectedAndrzej Hajda
This patch adds explicit check if there is a connector with connected status before fbdev initialization. It prevents creation of default fbdev 1024x768 which is unusable on panels with bigger resolutions. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04drm/mipi_dsi: create dsi devices only for nodes with reg propertyAndrzej Hajda
MIPI DSI host node can contain child nodes which are not DSI devices. Checking for existence of reg property can be used to distinguish such nodes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04Skip intel_crt_init for Dell XPS 8700Giacomo Comes
The Dell XPS 8700 has a onboard Display port and HDMI port and no VGA port. The call intel_crt_init freeze the machine, so skip such call. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73559 Signed-off-by: Giacomo Comes <comes at naic.edu> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-04drm/i915: vlv: fix RPS interrupt mask settingImre Deak
This typo may lead to missed RPS interrupts and as a result a too low or too high frequency for the current workload. The interrupt mask will be set properly at a subsequent GPU idle event, but can get corrupted again at the next RPS up/down event. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-04Revert "drm/i915/vlv: fixup DDR freq detection per Punit spec"Deepak S
As per the inputs provided by hardware team we still use DDR Rates as 0,1=800, 2=1066, 3=1333. With this change, Turbo freqs used on current machines matches. This reverts commit f64a28a7c5ab2fc342326de9e126acf3cc0f91d6. commit f64a28a7c5ab2fc342326de9e126acf3cc0f91d6 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Mon Nov 4 16:07:00 2013 -0800 drm/i915/vlv: fixup DDR freq detection per Punit spec v2: Add reference to previous commit which changed this. (Daniel) Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-04drm/i915: move power domain init earlier during system resumeImre Deak
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the resume_early handler. This is guaranteed to run before the resume handler of any other driver. The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too. Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the resume_late handler. v2: - move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt. intel_power_domains_init_hw() Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Cc: stable@vger.kernel.org [danvet: Add cc: stable and loud comments that this is just a hack.] [danvet: Fix "Should it be static?" sparse warning reported by Wu Fengguang's kbuilder.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-04drm/tegra: Use standard GPL v2 license textThierry Reding
Use the more canonical and concise variant of the GPL v2 license text. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/tegra: Relicense under GPL v2Thierry Reding
The majority of the code in this driver is licensed under the GPL v2, so relicense the rest under GPL v2 as well for consistency. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/tegra: Add eDP supportThierry Reding
Add support for eDP functionality found on Tegra124 and later SoCs. Only fast link training is currently supported. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/tegra: prime: Add vmap supportThierry Reding
This is trivial to support since all GEM objects are mapped into kernel space anyway. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/panel: add support for LG LD070WX3-SL01 panelAlexandre Courbot
This panel is used by Tegra Note 7 and supported by the simple-panel driver. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/panel: add support for LG LH500WX1-SD03 panelAlexandre Courbot
This panel is used by the NVIDIA SHIELD and supported by the simple-panel driver. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/panel: simple: Allow DSI panels to provide mode flagsThierry Reding
In order to differentiate between the different video modes (burst vs. non-burst, sync pulses vs. sync events) supported by peripherals, pass the flags that specify this mode in the panel description to the DSI peripheral device when probed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/panel: simple: Allow GPIO accesses to sleepThierry Reding
The enable GPIO for panels may be provided by GPIO expanders on slow busses (such as I2C), and therefore toggling the GPIO may sleep. Since these accesses don't happen in interrupt context, use the *_cansleep() variants of the GPIO API. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/panel: remove redundant regulator_disable()Alexandre Courbot
regulator_disable() is already performed by panel_simple_disable(), which is called by panel_simple_remove(). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/panel: use gpiod interface for enable GPIOAlexandre Courbot
Use the new GPIO descriptor interface to handle the panel's enable GPIO. This considerably simplifies the code. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> [treding@nvidia.com: rework to improve readability] Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/panel: Add LG 12.9" LCD panelThierry Reding
The LP129QE LCD has an LED backlight and a display resolution of 2560x1700 pixels. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04drm/ttm: Hide the implementation details of reservationThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2014-04-04drm: gem-cma: Fix warnings due to improper printk formatsLaurent Pinchart
Use the %pad printk specifier to print dma_addr_t variables. This fixes warnings on platforms where dma_addr_t has a different size than int or size_t. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-04drm/cma: Use dma_mmap_writecombine() to mmap bufferLaurent Pinchart
The GEM CMA helpers uses a custom mmap implementation based on remap_pfn_range(). While this works when the buffer DMA and physical addresses are identical, it fails to take IOMMU into account and tries to mmap the buffer to userspace using the DMA virtual address instead of the physical address. This results in mapping random physical pages when the device is behind an IOMMU. Use the DMA mapping dma_mmap_writecombine() function instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-04drm/mm: Fix search for smallest hole satisfying constraintsMichel Dänzer
entry->size is the size of the node, not the size of the hole after it. So the code would actually find the hole which can satisfy the constraints and which is preceded by the smallest node, not the smallest hole satisfying the constraints. Reported-by: "Huang, FrankR" <FrankR.Huang@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-04drm: Prefer noninterlace cmdline mode unless explicitly specifiedTakashi Iwai
Currently drm_pick_cmdline_mode() doesn't care about the interlace when the given mode line has no "i" suffix. That is, when there are multiple entries for the same resolution, an interlace mode might be picked up just depending on the assigned order, and there is no way to exclude it. This patch changes the logic for the mode selection, to prefer the noninterlace mode unless the interlace mode is explicitly given. When no matching mode is found, it still tries the interlace mode as fallback. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-04drm/radeon: Use two-ended allocation by size, v2Lauri Kasanen
This decreases eviction by up to 20%, by improving the fragmentation quality. No harm in normal cases that fit VRAM fully (PTS gaming suite). In some cases, even the VRAM-fitting cases improved slightly (openarena, urban terror). 512kb was measured as the most optimal threshold for 3d workloads common to radeon. Other drivers may need different thresholds according to their workloads. v2: Nicer formatting Signed-off-by: Lauri Kasanen <cand@gmx.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-04drm: Add support for two-ended allocation, v3Lauri Kasanen
Clients like i915 need to segregate cache domains within the GTT which can lead to small amounts of fragmentation. By allocating the uncached buffers from the bottom and the cacheable buffers from the top, we can reduce the amount of wasted space and also optimize allocation of the mappable portion of the GTT to only those buffers that require CPU access through the GTT. For other drivers, allocating small bos from one end and large ones from the other helps improve the quality of fragmentation. Based on drm_mm work by Chris Wilson. v3: Changed to use a TTM placement flag v2: Updated kerneldoc Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Christian König <deathsimple@vodafone.de> Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: David Airlie <airlied@redhat.com>
2014-04-04Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into ↵Dave Airlie
drm-next * 'msm-next' of git://people.freedesktop.org/~robclark/linux: drm/omap: Don't dereference list head when the connectors list is empty drm/msm/mdp: add timeout for irq wait drm/msm: validate flags, etc drm/msm: use componentised device support drm/msm: add chip-id param drm/msm: crank down gpu when inactive drm/msm: spin helper drm/msm: add hang_debug module param drm/msm: hdmi audio support
2014-04-04drm/rcar-du: Handle encoder initialization failuresLaurent Pinchart
The rcar_du_encoder_init() function can fail and return an error code. Don't ignore it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-04Merge branch 'drm-next-3.15' of ↵Dave Airlie
git://people.freedesktop.org/~deathsimple/linux into drm-next - Rework of finding the right PLL numbers for display - Couple of different bugfixes * 'drm-next-3.15' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: fix typo in spectre_golden_registers drm/radeon: fix endian swap on hawaii clear state buffer setup drm/radeon: call drm_edid_to_eld when we update the edid drm/radeon: rework finding display PLL numbers v2 drm/radeon: fix resuming mode in pm runtime resume path drm/radeon: fix runtime suspend breaking secondary GPUs drm/radeon: clear needs_reset flag if IB test fails
2014-04-03drm/radeon: fix typo in spectre_golden_registersAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-04-03drm/radeon: fix endian swap on hawaii clear state buffer setupAlex Deucher
Need to swap on BE. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-04-03drm/radeon: call drm_edid_to_eld when we update the edidAlex Deucher
This needs to be done to update some of the fields in the connector structure used by the audio code. Noticed by several users on irc. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-04-03drm/radeon: rework finding display PLL numbers v2Christian König
This completely reworks how the PLL parameters are generated and should result in better matching dot clock frequencies. Probably needs quite a bit of testing. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=76564 v2: more cleanup and comments. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-04-03drm/radeon: fix resuming mode in pm runtime resume pathDave Airlie
For runtime pm we'd never suspend with the modesetting hw turned on, so don't try and resume the modesetting hw, as that path will take locks that the interface that is causing us to wake up might also take. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-03drm/radeon: fix runtime suspend breaking secondary GPUsDave Airlie
Same fix as for nouveau, when we fail with EINVAL, subsequent gets fail hard, causing the device not to open. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-03drm/radeon: clear needs_reset flag if IB test failsChristian König
If the IB test fails we don't want to reset the card over and over again, just accept that it isn't working. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=76501 Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-13 10:00:42 +0000