summaryrefslogtreecommitdiff
path: root/drivers/hwmon/Kconfig
AgeCommit message (Collapse)Author
2012-04-01hwmon: (k10temp) Add support for AMD Trinity CPUsAndre Przywara
The on-chip northbridge's temperature sensor of the upcoming AMD Trinity CPUs works the same as for the previous CPUs. Since it has a different PCI-ID, we just add the new one to the list supported by k10temp. This allows to use the k10temp driver on those CPUs. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-04-01hwmon: (sht15) Fix Kconfig dependenciesGuenter Roeck
sht15 depends on GPIOLIB, not on GENERIC_GPIO. This fixes the following build error, seen if GPIOLIB is not defined: src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_direction_input': => 293:2 src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_direction_output': => 216:2 src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_free': => 1000:2 src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_get_value': => 296:2 src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_request': => 946:2 src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_set_value': => 218:2 src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_to_irq': => 514:2 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-04-01hwmon: (gpio-fan) Fix Kconfig dependenciesGuenter Roeck
gpio-fan depends on GPIOLIB, not on GENERIC_GPIO. This fixes the following build error, seen if GPIOLIB is not defined: src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_direction_output': => 372:3 src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_free': => 130:2 src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_get_value': => 79:2 src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_request': => 98:2 src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_set_value': => 156:3 src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_to_irq': => 114:2 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Simon Guinot <sguinot@lacie.com>
2012-03-23hwmon: Add MCP3021 ADC driverXie Xiaobo
Add I2C driver for MCP3021 that is an ADC chip from Microchip. The MCP3021 is a successive approximation A/D converter (ADC) with 10-bit resolution. The driver export the value of Vin to sysfs, the voltage unit is mV. Through the sysfs interface, lm-sensors tool can also display Vin voltage. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23hwmon: (mc13783-adc) Add support for the MC13892 PMICUwe Kleine-Koenig
Based on a patch by David Jander that mostly did s/mc13783/mc13xxx/ . Additionally use dev_get_drvdata instead of to_platform_device + platform_get_drvdata in mc13783_adc_read (spotted by Jean Delvare). Cc: David Jander <david.jander@protonic.nl> Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23hwmon: (lm90) Add support for GMT G781Guenter Roeck
GMT G781 is a ADM1032-compatible temperature sensor chip. Add support to the LM90 driver. Cc: Mike Gorchak <lestat@i.com.ua> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23hwmon: (w83795) Unconditionally support manual fan speed controlJean Delvare
Manual fan speed control uses a standard interface and has received sufficient testing and review by now, it can be enabled unconditionally. This includes attributes pwm[1-8], pwm[1-8]_enable, pwm[1-8]_mode and pwm[1-8]_freq. We only let the user switch from automatic mode to manual mode, but not the other way around, as automatic control settings may not have been set properly by the BIOS. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-20hwmon: (sch56xx) Add support for the integrated watchdog (v2)Hans de Goede
Add support for the watchdog integrated into the SMSC SCH5627 and SCH5636 superio-s. Since the watchdog is part of the hwmon logical device and thus shares ioports with it, the watchdog driver is integrated into the existing hwmon drivers for these. Note that this version of the watchdog support for sch56xx superio-s implements the watchdog chardev interface itself, rather then relying on the recently added watchdog core / watchdog_dev. This is done because currently some needed functionality is missing from watchdog_dev, as soon as this functionality is added (which is being discussed on the linux-watchdog mailinglist), I'll convert this driver over to using watchdog_dev. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [guenter.roeck@ericsson.com: Added missing linux/slab.h include] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18hwmon: (lm80) Add detection of NatSemi/TI LM96080Jean Delvare
Add detection of the National Semiconductor (now Texas Instruments) LM96080. It is functionally compatible with the LM80 but detection is completely different. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-07hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804Guenter Roeck
Also update IDT datasheet locations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-07hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000Jean Delvare
These are fully compatible with Jedec JC 42.4 as far as I can see. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (it87) Add IT8728F supportJean Delvare
Until we get a datasheet for the IT8728F, treat it as fully compatible with the IT8721F, as it seems to work reasonably well. This closes kernel bug #27262. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) Add support for LM96163Guenter Roeck
LM96163 is an enhanced version of LM63 with improved PWM resolution. Add chip detection code as well as support for improved PWM resolution if the chip is configured to use it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-05hwmon: (f75375s) Add support for F75387SG/RGBjörn Gerhart
Fintek F75387SG/RG is mostly compatible to F75373/F75375. Add support for it to the F75375S driver. Fan support for F75387SG/RG has been implemented but not tested. Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-17hwmon: (exynos4_tmu) Fix Kconfig dependencyDonggeun Kim
Rename dependency of EXYNOS4_TMU in Kconfig to the existing one. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (w83627ehf) Add support for the W83627UHGJean Delvare
This is essentially a stripped down version of the W83627DHG. Noticeable difference is that it is still powered with +5V, as older models, even though the ADC resolution is 8 mV as newer models have. Thanks to Ulf Bruman (Saab Group) for doing all the testing. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: Avoid building drivers for powerpc that read/write ISA addressesDean Nelson
A modprobe of hwmon drivers that read/write ISA addresses on a powerpc results in a kernel Oops. These reads/writes are being done via the inb()/in_8() and outb()/out_8() macros. Prevent these drivers from being built for powerpc. Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-10-24hwmon: (lm75) Add support for Analog Devices ADT75Michael Hennerich
Add datasheet reference and device ID for ADT75. The ADT75, like some other LM75 derivatives, needs to be instantiated using methods 1, 2, or 4. For more information see Documentation/i2c/instantiating-devices. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: AD7314 driver (ported from IIO)Jonathan Cameron
Driver for AD7314, ADT7301, and ADT7302, ported from IIO. Currently dropped power down mode support. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> [guenter.roeck@ericsson.com: Added MODULE_DEVICE_TABLE] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: Add driver for EXYNOS4 TMUDonggeun Kim
This patch allows to read temperature from TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-30Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits) hwmon: (lm90) Refactor reading of config2 register hwmon: (lm90) Make SA56004 detection more robust hwmon: (lm90) Simplify handling of extended local temp register hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066 hwmon: (max34440) Add support for peak attributes hwmon: (max8688) Add support for peak attributes hwmon: (max16064) Add support for peak attributes hwmon: (adm1275) Add support for peak attributes hwmon: (pmbus) Add support for peak attributes hwmon: Add new attributes to sysfs ABI hwmon: (pmbus) Strengthen check for status register existence hwmon: (pmbus) Add support for virtual pages hwmon: (pmbus) Support reading and writing of word registers in device specific code hwmon: (pmbus) Increase attribute name size hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices hwmon: (pmbus) Add support for VID output voltage mode hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus hwmon: (coretemp) Add core/pkg threshold support to Coretemp hwmon: (lm95241) Add support for LM95231 hwmon: LM95245 driver ...
2011-07-28hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbusGuenter Roeck
Since the number of PMBus drivers is getting large, move them into directory drivers/hwmon/pmbus to improve readability and scalability. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28hwmon: (lm95241) Add support for LM95231Guenter Roeck
LM95231 is fully compatible to LM95241; only necessary change is to add chip detection. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-07-28hwmon: LM95245 driverAlexander Stein
A hwmon driver for the National Semiconductor LM95245 dual temperature sensors chip. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28hwmon: (lm90) Add support for Philips SA56004Stijn Devriendt
Add support for Philips SA56004, an LM86 compatible temperature sensor. Signed-off-by: Stijn Devriendt <sdevrien@cisco.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28hwmon: Driver for NTC ThermistorsDonggeun Kim
Add support for NTC Thermistor series. In this release, the following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473, and NCP15WL333. This driver is based on the datasheet of MURATA. The driver in the patch does conversion from the raw ADC value (either voltage or resistence) to temperature. In order to use voltage values as input, the circuit schematics should be provided with the platform data. A compensation table for each type of thermistor is provided for the conversion. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28hwmon: Driver for MAX1668David George
This patch adds support for MAX1668 and compatible temperature sensors. Signed-off-by: David George <david.george@ska.ac.za> [guenter.roeck@ericsson.com: minor cleanup of probe error path] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-25hwmon: (via-cputemp) Add VID reporting supportJean Delvare
At least VIA family 6 model D CPU report the VID settings in a MSR, so expose the value to user-space. Not sure about model A. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Tested-by: Jeff Rickman <jrickman@myamigos.us>
2011-07-25hwmon: New driver sch5636Hans de Goede
This patch adds a new driver for SMSC SCH5636 Super I/O chips. The chips include an embedded microcontroller for hardware monitoring solutions, allowing motherboard manufacturers to create their own custom hwmon solution based upon the SCH5636. Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636 based hwmon solution. The sch5636 driver runs a sanity check on loading to ensure it is dealing with a Fujitsu Theseus and not with another custom SCH5636 based hwmon solution. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25hwmon: (sch5627) Factor out some code shared with sch5636 driverHans de Goede
This patch adds a new sch56xx-common.ko which contains code which will also be used in the new sch5636 driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-03hwmon: (f71882fg) Add support for the F71869AHans de Goede
The F71869A is almost the same as the F71869F/E, except that it has the normal number of temp and pwm zones for a F71882FG derived chip, rather then the limited number of the F71869F/E. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Max Baldwin <archerseven@gmail.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: New driver for the SMSC EMC6W201Jean Delvare
This is a new driver for the SMSC EMC6W201 hardware monitoring device. The device is functionally close to the EMC6D100 series, but is register-incompatible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Harry G McGavran Jr <w5pny@arrl.net> Tested-by: Jeff Rickman <jrickman@myamigos.us> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: (abituguru) Depend on DMIJean Delvare
The abituguru drivers are only built on X86, where DMI support is now enabled by default. So let these drivers depend on DMI, for the following gains: * Robustness and safety. Detection of these devices is weak and uses non-standard methods, it should really be limited to Abit boards unless the user explicitly asks otherwise. * Code simplicity. The code is easier to read without ifdefs. * Better build testing coverage. Now there's only one way to build the drivers, so no risk of build failure on exotic systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
2011-05-25Move ACPI power meter driver to hwmonJean Delvare
As discussed earlier, the ACPI power meter driver would better live in drivers/hwmon, as its only purpose is to create hwmon-style interfaces for ACPI 4.0 power meter devices. Users are more likely to look for it there, and less likely to accidentally hide it by unselecting its dependencies. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Len Brown <lenb@kernel.org>
2011-05-25hwmon: (f71882fg) Add support for F71808AHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (asc7621) Drop duplicate dependencyJean Delvare
The config SENSORS_ASC7621 entry is inside an if HWMON / endif block, so it already depends on HWMON. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: Add driver for AMD family 15h processor power informationAndreas Herrmann
This CPU family provides NB register values to gather following TDP information * ProcessorPwrWatts: Specifies in Watts the maximum amount of power the processor can support. * CurrPwrWatts: Specifies in Watts the current amount of power being consumed by the processor. This driver provides * power1_crit (ProcessorPwrWatts) * power1_input (CurrPwrWatts) Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (k10temp) Add support for Fam15h (Bulldozer)Andre Przywara
AMDs upcoming CPUs use the same mechanism for the internal temperature reporting as the Fam10h CPUs, so we just needed to add the appropriate PCI-ID to the list. This allows to use the k10temp driver on those CPUs. While at it change the Kconfig entry to be more generic. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-21hwmon: Remove pkgtemp driverGuenter Roeck
After the merge of pkgtemp functionality into the coretemp driver, the pkgtemp driver is no longer necessary. Remove it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-05-19hwmon: (pmbus) Add support for Analog Devices ADM1275Guenter Roeck
Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power Monitor Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health ↵Guenter Roeck
Controllers Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910 Sequencer and System Health Controllers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Add support for TI UCD9200 series of PWM System ControllersGuenter Roeck
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: Driver for MAX16065 System Manager and compatiblesGuenter Roeck
This patch adds hardware monitoring support for Maxim MAX16065, MAX16066, MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers with nonvolatile fault registers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Jean Delvare <khali@linux-fr.org>
2011-05-19hwmon: Add support for MAX6642Per Dalén
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with Overtemperature Alarm from Maxim. Signed-off-by: Per Dalen <per.dalen@appeartv.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29hwmon: (adm1021) Clarify documentation regarding Xeon processorsJean Delvare
Recent Xeon processor thermal sensors are supported by the coretemp driver and not the adm1021 driver. Only one old generation of Xeon processors (the first Netburst ones) are supported by the adm1021 driver. Reported-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29hwmon: (lm90) Add support for ADT7461A and NCT1008Guenter Roeck
This patch adds support for ADT7461A and NCT1008 to the lm90 driver. Both chips have identical functionality and report the same manufacturing ID and device ID values. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-26hwmon: (f71882fg) Add support for the F71889AHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-26hwmon: (f71882fg) Add support for the F81865FJean Delvare
Add support for the Fintek F81865F. It's essentially compatible with the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan inputs only. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-26hwmon: (f71882fg) Document all supported devicesJean Delvare
The list of supported devices was not always well documented in all places. Clarify and list all devices in documentation, Kconfig and the driver itself. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-23hwmon: twl4030: Hwmon Driver for TWL4030 MADCKeerthy
This driver exposes the sysfs nodes of the TWL4030 MADC module. All the voltage channel values are expressed in terms of mV. Channel 13 and channel 14 are reserved. There are channels which represent temperature and current the output is represented by celcius and mA respectively. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 00:38:50 +0000