summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices/m25p80.c
AgeCommit message (Collapse)Author
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-09-23Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (58 commits) mtd: jedec_probe: add PSD4256G6V id mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board) mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board) m25p80: Add Spansion S25FL129P serial flashes jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs mtd: sh_flctl: register sh_flctl using platform_driver_probe() mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible mtd: nand: fix tmio_nand ecc correction mtd: nand: add __nand_correct_data helper function mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G mtd: inftl: fix fold chain block number mtd: jedec: fix compilation problem with I28F640C3B definition mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver mtd: ofpart: Check availability of reg property instead of name property driver/Makefile: Initialize "mtd" and "spi" before "net" mtd: omap: adding DMA mode support in nand prefetch/post-write mtd: omap: add support for nand prefetch-read and post-write mtd: add nand support for w90p910 (v2) mtd: maps: add mtd-ram support to physmap_of mtd: pxa3xx_nand: add single-bit error corrections reporting ...
2009-09-21trivial: mtd: add __init/__exit macros to init/exitfunctionsPeter Huewe
Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions to the following modules from drivers/mtd/ devices/m25p80.c devices/slram.c linux version 2.6.30 ftl.c nand/cafe_nand.c nand/cmx270_nand.c Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-19m25p80: Add Spansion S25FL129P serial flashesKevin Cernekee
Tested 64KiB block size only. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: m25p80: add SST WF SPI flash device informationGraf Yang
Support SST25WF{512,010,020,040} SPI flashes. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: m25p80: add support for AAI programming with SST SPI flashesGraf Yang
The SST SPI flashes are a bit non-standard in that they can be programmed one byte at a time (including address!), or they can be written two bytes at a time with auto address incrementing (AAI). The latter form is obviously much better for performance, so let's use it when possible. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04mtd: m25p80: add support for 3 Macronix flash chipsSiddarth Gore
Signed-off-by: Siddarth Gore <gores@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03mtd: m25p80: fix null pointer dereference bugAnton Vorontsov
This patch fixes the following oops, observed with MTD_PARTITIONS=n: m25p80 spi32766.0: m25p80 (1024 Kbytes) Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xc03a54b0 Oops: Kernel access of bad area, sig: 11 [#1] Modules linked in: NIP: c03a54b0 LR: c03a5494 CTR: c01e98b8 REGS: ef82bb60 TRAP: 0300 Not tainted (2.6.31-rc4-00167-g4733fd3) MSR: 00029000 <EE,ME,CE> CR: 24022022 XER: 20000000 DEAR: 00000008, ESR: 00000000 TASK = ef82c000[1] 'swapper' THREAD: ef82a000 GPR00: 00000000 ef82bc10 ef82c000 0000002e 00001eb8 ffffffff c01e9824 00000036 GPR08: c054ed40 c0542a08 00001eb8 00004000 22022022 1001a1a0 3ff8fd00 00000000 GPR16: 00000000 00000001 00000000 00000000 ef82bddc c0530000 efbef500 ef8356d0 GPR24: 00000000 ef8356d0 00000000 efbf7a00 c0530ec4 ffffffed efbf5300 c0541f98 NIP [c03a54b0] m25p_probe+0x22c/0x354 LR [c03a5494] m25p_probe+0x210/0x354 Call Trace: [ef82bc10] [c03a5494] m25p_probe+0x210/0x354 (unreliable) [ef82bca0] [c024e37c] spi_drv_probe+0x2c/0x3c [ef82bcb0] [c01f1afc] driver_probe_device+0xa4/0x178 [ef82bcd0] [c01f06e8] bus_for_each_drv+0x6c/0xa8 [ef82bd00] [c01f1a34] device_attach+0x84/0xa8 ... Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-26mtd: m25p80 timeout too short for worst-case m25p16 devicesSteven A. Falco
The m25p16 data sheet from numonyx lists the worst-case bulk erase time (tBE) as 40 seconds. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: m25p80: add support for Macronix MX25L12805DLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: m25p80 nand: add m45pe10 idsMatthieu CASTET
this patch add m45pe10 [1] chip support to the m25p80 driver. [1] http://www.numonyx.com/Documents/Datasheets/M45PE10.pdf Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-08mtd: fix timeout in M25P80 driverPeter Horton
Extend erase timeout in M25P80 SPI Flash driver. The M25P80 drivers fails erasing sectors on a M25P128 because the ready wait timeout is too short. Change the timeout from a simple loop count to a suitable number of seconds. Signed-off-by: Peter Horton <zero@colonel-panic.org> Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-29mtd: Bug in m25p80.c during whole-chip eraseSteven A. Falco
There is a logic error in "whole chip erase" for the m25p80 family. If the whole device is successfully erased, erase_chip() will return 0, and the code will fall through to the "else" clause, and do sector-by-sector erase in addition to the whole-chip erase. This patch corrects that. Also, the MAX_READY_WAIT_COUNT is insufficient for an m25p16 connected to a 400 MHz powerpc. Increasing it allows me to successfully program the device on my board. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04[MTD] support driver model updatesDavid Brownell
Follow-on patch to the previous driver model patch for the MTD framework. This one makes various MTD drivers connect to the driver model tree, so /sys/devices/virtual/mtd/* nodes are no longer present ... mostly drivers used on boards I have handy. Based on a patch from Kay Sievers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] partitioning utility predicatesDavid Brownell
Move mtd_has_partitions() and mtd_has_cmdlinepart() inlines from a DaVinci-specific driver to the <linux/mtd/partitions.h> header. Use those to eliminate #ifdefs in two drivers which had their own definitions of mtd_has_partitions(). Quite a lot of other MTD drivers could benefit from using use one or both of these to remove #ifdeffery. Maybe some Janitors would like to help. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-23[MTD] struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-19[MTD] fix m25p80 64-bit divisionsArtem Bityutskiy
MTD has recently been upgraded for 64-bit support, see commit number 69423d99fc182a81f3c5db3eb5c140acc6fc64be in the mtd-2.6.git tree (git://git.infradead.org/mtd-2.6.git) or see this URL: http://git.infradead.org/mtd-2.6.git?a=commit;h=69423d99fc182a81f3c5db3eb5c140acc6fc64be Some variables in MTD data structures which were 32-bit became 64-bit. Namely, the 'size' field in 'struct mtd_info' and the 'addr'/'len' fields in 'struct erase_info'. This means we have to use 'do_div' to divide them. This patch fixes the following linking error: ERROR: "__umoddi3" [drivers/mtd/devices/m25p80.ko] undefined! This patch changes divisions of 64-bit variable so that they use 'do_div'. This patch also change some print placeholders to get rid of gcc warnings. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26[MTD] m25p80: chip erase != block erase != sector eraseChen Gong
This fixes broken terminology added in the "m25p80.c erase enhance" patch, which added a chip erase command but called it "block erase". There are already two block erase commands; blocks are 4KiB or 32KiB. There's also a sector erase (usually 64 KiB). Chip erase typically covers Megabytes. OPCODE_BE ==> OPCODE_CHIP_ERASE erase_block ==> erase_chip [dbrownell@users.sourceforge.net: update sector erase comments too ] Signed-off-by: Chen Gong <clumsycg@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26[MTD] m25p80: fix detection of m25p16 flashesMike Frysinger
Commit d0e8c47c58575b9131e786edb488fd029eba443e ("m25p80.c extended jedec support") added support for extended ids but seems to break on flashes which don't have an extended id defined. If the table does not have an extid defined, then we should ignore it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26[MTD] m25p80: fix detection of SPI partsMike Frysinger
Commit d0e8c47c58575b9131e786edb488fd029eba443e ("m25p80.c extended jedec support") added support for extended ids but in the process managed to break detection of all flashes. The ext jedec id check was inserted into an if statement that lacked braces, and it did not add the required braces. As such, the detection routine always returns the first entry in the SPI flash list. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-20Revert "[MTD] m25p80.c code cleanup"David Woodhouse
This reverts commit 75d0ee2202b5740e94e913d8a52f91c6557c4c81. Although it seems ObviouslyCorrect™, the spi_write() call uses DMA, while spi_write_then_read() does not. Since our buffer is on the stack, we must use the latter even though we don't actually want to read anything back. Pointed out by David Brownell <david-b@pacbell.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-14[MTD] m25p80.c extended jedec support (v2)Chen Gong
Include missing parts of previous patch. Signed-off-by: Chen Gong <g.chen@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-11[MTD] m25p80.c extended jedec supportChen Gong
- add extended device information support - add s25sl128 device support Signed-off-by: Chen Gong <g.chen@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-11[MTD] m25p80.c code cleanupChen Gong
code cleanup for m25p80.c Signed-off-by: Chen Gong <g.chen@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-11[MTD] m25p80.c erase enhanceChen Gong
This patch adds an erase_block command to enhance erase operation Signed-off-by: Chen Gong <g.chen@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] m25p80: fix bug - ATmel spi flash fails to be copied toMichael Hennerich
Atmel serial flash tends to power up with the protection status bits set. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=4089 [michael.hennerich@analog.com: remove duplicate code] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-06-06[MTD] m25p80.c mutex unlock fixChen Gong
fix a mutex release bug in function m25p80_write. Signed-off-by: Chen Gong <g.chen@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-25[MTD] m25p80: Add Support for ATMEL AT25DF641 64-Megabit SPI FlashMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-25[MTD] m25p80: add FAST_READ access support to M25PxxBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28[MTD] m25p80: Use correct units for binary multiplesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28[MTD] m25p80 handles more chips, uses JEDEC ids and small eraseblocksDavid Brownell
Update chip ID tables in m25p80 to handle more SPI flash chips, matching datasheets. All of these can use the same core operations and are newer chips that support the JEDEC "read id" instruction: - Atmel AT25 and AT26 (seven chips) - Spansion S25SL (five chips) - SST 25VF (four chips) - ST M25, M45 (five more chips) - Winbond W25X series (seven chips) That JEDEC instruction is now used, either to support a sanity check on the platform data holding board configuration data, or to determine chip type when it's not included in platform data. In fact, boards that don't need a standard partition table may not need that platform data any more. For chips that support 4KiB erase units, use that smaller block size instead of the larger size (usually 64KiB); it's less wasteful. (Tested on W25X80.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28[MTD] m25p80 converted to mutexDavid Brownell
Convert semaphore usage in m25p80 driver to mutex; mention another kind of SPI flash chip that should be able to use this driver (given minor tweaks). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-30[PATCH] m25p80 build fixes (with MTD debug)David Brownell
Fix build issues that show up with the m25p80 SPI flash driver when building with MTD debug enabled. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_KERNELChristoph Lameter
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-05[PATCH] [MTD] DEVICES: Fill more device IDs in the structure of m25p80Aubrey Lee
The flash_info structure has a bunch of missing fields which causes problems when actually tryin to use some ST parts as it gets detected incorrectly. Signed-off-by: Aubrey L1 <aubreylee@gmail.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-06-14[MTD] assume mtd->writesize is 1 for NOR flashesArtem B. Bityutskiy
Signed-off-by: Artem B. Bityitskiy
2006-05-29[MTD] Fix debug printk format warning in m25p80 SPI chip driver, again.Andrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-11[PATCH] MTD: m25p80: fix printk format warningRandy Dunlap
Fix printk format warning: drivers/mtd/devices/m25p80.c:189: warning: format '%zd' expects type 'signed size_t', but argument 6 has type 'u_int32_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-31[PATCH] m25p80: printk warning fixAndrew Morton
drivers/mtd/devices/m25p80.c: In function `m25p80_erase': drivers/mtd/devices/m25p80.c:189: warning: signed size_t format, different type arg (arg 6) Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13[PATCH] spi: misc fixesDavid Brownell
This collects some small SPI patches that seem to be missing from the MM tree: - spi_butterfly kbuild hooks got dropped somehow; this restores them - quick fix for a (theoretical?) m25p80_write() oops noted by Andrew - quick fix for a potential config-specific oops for mtd_dataflash() - minor doc tweaks Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] spi: use linked lists rather than an arrayVitaly Wool
This makes the SPI core and its users access transfers in the SPI message structure as linked list not as an array, as discussed on LKML. From: David Brownell <dbrownell@users.sourceforge.net> Updates including doc, bugfixes to the list code, add spi_message_add_tail(). Plus, initialize things _before_ grabbing the locks in some cases (in case it grows more expensive). This also merges some bitbang updates of mine that didn't yet make it into the mm tree. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] spi: M25 series SPI flashMike Lavender
This was originally a driver for the ST M25P80 SPI flash. It's been updated slightly to handle other M25P series chips. For many of these chips, the specific type could be probed, but for now this just requires static setup with flash_platform_data that lists the chip type (size, format) and any default partitioning to use. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mike Lavender <mike@steroidmicros.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-15 05:38:20 +0000