summaryrefslogtreecommitdiff
path: root/drivers/mxc/ipu3
AgeCommit message (Expand)Author
2012-03-21Fixes IPU memory corruption to allow simultaneous dual display2.6.35-mx53-201203211544Andy Voltz
2012-03-09ENGR00162195 IPUv3M:Clear IDMAC_LOCK_EN_1 for tough single displayLiu Ying
2012-03-09ENGR00160566 IPUv3:Improve IDMAC_LOCK_EN settingLiu Ying
2012-03-09ENGR00159010 IPUv3:Restore IDMAC_CH_LOCK_EN_1 for resumeLiu Ying
2012-03-09ENGR00158480 IPUv3:Set IDMAC LOCK for SDC display channelsLiu Ying
2011-08-29ENGR00155145 ipuv3 disp pos: restore pos setting after channel disable.Jason Chen
2011-08-29ENGR00153474 ipuv3 split mode: vf and enc task display with errorJason Chen
2011-08-29ENGR00155141 ipuv3 split mode: adjust split calculate functionJason Chen
2011-08-16ENGR00154880 ipuv3 dev: wait event could be signal returnJason Chen
2011-08-03ENGR00154226-1 IPUv3:Improve driverLiu Ying
2011-07-01ENGR00152359-2 ipuv3: add VYU444 fmtJason Chen
2011-06-23ENGR00151858-1 IPUv3:Improve power stablilityLiu Ying
2011-06-08ENGR00151175 IPUv3:Improve driverLiu Ying
2011-06-03ENGR00142551-1 IPUv3:Support triple bufferLiu Ying
2011-05-18ENGR00143575 IPUv3:Align IDMAC BS with DMFC FIFO BSLiu Ying
2011-05-17ENGR00141552 ipuv3: fix display pin's power leakJason Chen
2011-05-12ENGR00142683 IPUv3:Increase IDMAC BS for RGBP and DMFC BSLiu Ying
2011-03-28ENGR00141161 ipuv3: add bgr24 fmt support for diJason Chen
2011-03-17ENGR00140764 ipuv3 dev: change cache policy to writethroughJason Chen
2011-02-17ENGR00139321 ipuv3: add YV12 format supportJason Chen
2011-02-12ENGR00138644-4 TVE: change the video mode setting methodJason Chen
2011-02-03ENGR00138520 IPUv3:Correct IPU spinlock logicLiu Ying
2011-02-03ENGR00138270-2 ipuv3: change ipu_check_buffer_busy to ipu_check_buffer_readyJason Chen
2011-02-03ENGR00137447-3 ipuv3: change video mode timming adjust methodJason Chen
2011-02-03ENGR00137158 ipuv3: fix flash issue by first setting FG positionJason Chen
2011-02-03ENGR00137058 ipuv3:update DP SRM by MCU if FG disable for FG position settingJason Chen
2011-02-03ENGR00134203-1 IPUv3 VDI:de-interlacing improvementLiu Ying
2011-02-03ENGR00134077-2 Add TVE 1080P30/25/24, 1080I60/50 support for iMX53Ran Ferderber
2011-02-03ENGR00134076 ipuv3: should not set burst size againJason Chen
2011-02-03ENGR00133954-2 ipuv3: remove FB_SYNC_EXT flagJason Chen
2011-02-03ENGR00122167-1 ipuv3: adding VGA support.Jason Chen
2011-02-03ENGR00133639 IPUv3:Support YUYV and UYVY interlaced input frameLiu Ying
2011-02-03ENGR00133318-1 IPUv3 CSI:Support SMFC channel interlaced scan orderLiu Ying
2011-02-03ENGR00133345-1 IPUv3 VDI:Support bottom field first settingLiu Ying
2010-11-03ENGR00133034 ipuv3: fix black flash issue during high resolution video playbackJason Chen
2010-09-25ENGR00131660 ipuv3: left stripe output column should be set to zeroJason Chen
2010-09-25ENGR00131417 ipuv3: change FG position setting codeJason Chen
2010-09-25ENGR00127358 ipuv3: make display data signal negative during blanking periodJason Chen
2010-09-25ENGR00127332 ipuv3: change the disalbe dp-dc timmingJason Chen
2010-09-25ENGR00126618 V4L2 capture:Stream mode fails with all IPU channels offLiu Ying
2010-09-25ENGR00126156 ipuv3: check own clk count only when around clk rateJason Chen
2010-09-01ENGR00126692-3: Upgrade kernel to 2.6.35Dinh Nguyen