summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/allwinner
AgeCommit message (Collapse)Author
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: ethernet: sun4i-emac: Read rxhdr in CPU byte-orderMichael Weiser
The EMAC EMAC_RX_IO_DATA_REG data register is dual-purpose: On one hand it is used to move actual packet data off the wire. This will be in wire-format and accepted as such by higher layers such as IP. Therefore it is correctly read as-is (i.e. raw) using readsl. On the other hand it provides metadata about incoming transfers to the driver such as length and checksum validation status. This data is little-endian, always and it is interpreted by the driver. Therefore it needs to be swapped to CPU endianness to make sense to the driver. This is already done for the "receive header" but not rxhdr. Read rxhdr using readl in order for sun4i-emac to work correctly when running a big-endian kernel. Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: ethernet: sun4i-emac: Allow to enable netif messagesMichael Weiser
sun4i-emac has the ability to print a number of diagnostic messages using dev_dbg depending on message level settings implemented using netif_msg_* macros. But there's no way to actually enable them. Add the ability to switch diagnostic messages on using either a module parameter debug or ethtool -s <netif> msglvl <flags>. Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: deprecate eth_change_mtu, remove usageJarod Wilson
With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22net: ethernet: sun4i-emac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22net: ethernet: sun4i-emac: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21net: sun4i-emac: Properly free resources on probe failure and removeHans de Goede
Fix sun4i-emac not releasing the following resources: -iomapped memory not released on probe-failure nor on remove -clock not getting disabled on probe-failure nor on remove -sram not being released on remove And while at it also add error checking to the clk_prepare_enable call done on probe. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25net: sun4i-emac: Claim emac sramHans de Goede
Claim the emac sram ourselves, rather then relying on the bootloader having mapped the sram to the emac controller during boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08ethernet: codespell comment spelling fixesJoe Perches
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31net: sun4i-emac: fix error return codeJulia Lawall
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03net: ethernet: Remove superfluous ether_setup after alloc_etherdevTobias Klauser
There is no need to call ether_setup after alloc_ethdev since it was already called there. Follow commits c706471b2601 ("net: axienet: remove unnecessary ether_setup after alloc_etherdev") and 3c87dcbfb36c ("net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev") and fix the pattern in all remaining ethernet drivers. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05net: sun4i-emac: fix memory leak on bad packetMarc Zyngier
Upon reception of a new frame, the emac driver checks for a number of error conditions, and flag the packet as "bad" if any of these are present. It then allocates a skb unconditionally, but only uses it if the packet is "good". On the error path, the skb is just forgotten, and the system leaks memory. The piece of junk I have on my desk seems to encounter such error frequently enough so that the box goes OOM after a couple of days, which makes me grumpy. Fix this by moving the allocation on the "good_packet" path (and convert it to netdev_alloc_skb while we're at it). Tested on a random Allwinner A20 board. Cc: Stefan Roese <sr@denx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25net: allwinner: emac: Add missing free_irqMaxime Ripard
If the mdio probe function fails in emac_open, the interrupt we just requested isn't freed. If emac_open is called again, for example because we try to set up the interface again, the kernel will oops because the interrupt wasn't properly released. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-12net: sun4i-emac: add promiscuous supportMarc Zyngier
The sun4i-emac driver is rather primitive, and doesn't support promiscuous mode. This makes usage such as bridging impossible, which is a shame on virtualization capable HW such as the Allwinner A20. The fix is fairly simple: move the RX setup code to the ndo_set_rx_mode vector, and add the required HW configuration when IFF_PROMISC is passed by the core code. This has been tested on a generic A20 box running a few virtual machines hanging off a bridge with the EMAC chip as the link to the outside world. Cc: Stefan Roese <sr@denx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24sun4i-emac: Call dev_consume_skb_any instead of dev_kfree_skb.Eric W. Biederman
Replace dev_kfree_skb with dev_consume_skb_any in emacs_start_xmit which can be called in hard irq and other contexts. emac_start_xmit always transmits the packet making dev_consume_skb the appropriate function to call. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-02-06net: ethernet: sunxi: Add new compatiblesMaxime Ripard
The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Add compatibles matching the other pattern to the ethernet driver for consistency, and keep the older one for backward compatibility. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: allwinner: emac: Add missing free_irqMaxime Ripard
The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-26drivers: net: sun4i-emac: select MDIO_SUN4IMaxime Ripard
The EMAC driver can't work without its associated PHY driver. Reflect this in the Kconfig options by selecting it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-26drivers: net: allwinner: Fix Kconfig indentationMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: Move MII out from under NET_CORE and hide itBen Hutchings
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net: sun4i-emac: Staticize local symbolsSachin Kamat
Some symbols referenced only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Stefan Roese <sr@denx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net: sun4i-emac: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Stefan Roese <sr@denx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net: sun4i-emac: remove erroneous assignmentArnd Bergmann
The newly added sun4i-emac driver causes a build error when CONFIG_NET_POLL_CONTROLLER is set, because it attempts to assign a pointer to netdev->poll_controller, which has been replaced with ops->ndo_poll_controller in 2.6.31! The correct assignment is present as well, so we just need to remove the wrong one. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Stefan Roese <sr@denx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Richard Genoud <richard.genoud@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Maxime Ripard <maxime.ripard@anandra.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net: sun4i-emac: fix a typo in emac_probe()Wei Yongjun
Just fixed a typo in emac_probe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31net: Add EMAC ethernet driver found on Allwinner A10 SoC'sStefan Roese
The Allwinner A10 has an ethernet controller that seem to be developped internally by them. The exact feature set of this controller is unknown, since there is no public documentation for this IP, and this driver is mostly the one published by Allwinner that has been heavily cleaned up. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>