summaryrefslogtreecommitdiff
path: root/drivers/net/smc91x.h
AgeCommit message (Collapse)Author
2010-07-26Remove REDWOOD_[456] config options and conditional codeChristian Dietrich
The config options for REDWOOD_[456] were commented out in the powerpc Kconfig. The ifdefs referencing this options therefore are dead and all references to this can be removed (Also dependencies in other KConfig files). Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-03-10net: add ColdFire support to the smc91x driverGreg Ungerer
Some embedded ColdFire based boards use the SMC 91x family of ethernet devices. (For example the Freescale M5249C3 and MoretonBay NETtel). Add IO access support to the SMC91x driver, and allow this driver to be configured for ColdFire platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05net: smc91x: Support Qualcomm MSM development boards.David Brown
Signed-off-by: David Brown <davidb@quicinc.com> Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11smc91x: remove OMAP specific bitsLadislav Michl
Now that all OMAP boards are using the board resources, we don't need to keep the arch/board specific crap in the driver header. Cc: linux-net@vger.kernel.org Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) be2net: fix some cmds to use mccq instead of mbox atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA pkt_sched: Fix qstats.qlen updating in dump_stats ipv6: Log the affected address when DAD failure occurs wl12xx: Fix print_mac() conversion. af_iucv: fix race when queueing skbs on the backlog queue af_iucv: do not call iucv_sock_kill() twice af_iucv: handle non-accepted sockets after resuming from suspend af_iucv: fix race in __iucv_sock_wait() iucv: use correct output register in iucv_query_maxconn() iucv: fix iucv_buffer_cpumask check when calling IUCV functions iucv: suspend/resume error msg for left over pathes wl12xx: switch to %pM to print the mac address b44: the poll handler b44_poll must not enable IRQ unconditionally ipv6: Ignore route option with ROUTER_PREF_INVALID bonding: make ab_arp select active slaves as other modes cfg80211: fix SME connect rc80211_minstrel: fix contention window calculation ssb/sdio: fix printk format warnings p54usb: add Zcomax XG-705A usbid ...
2009-09-15Nicolas Pitre has a new email addressNicolas Pitre
Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-14netdev: smc91x: drop Blackfin cruftMichael Hennerich
Now that all Blackfin boards are using the board resources, we don't need to keep the arch/board specific crap in the driver header. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26smc91x.h: add config for Nomadik evaluation kitAlessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-05[ARM] pxa/stargate2: Add board specific elements to the smc91x driverJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-10Separate out the proc- and unit-specific header directories from the generalDavid Howells
MN10300 arch headers and place them instead in the same directories as contain the .c files for the processor and unit implementations. This permits the symlinks include/asm/proc and include/asm/unit to be dispensed with. This does, however, require that #include <asm/proc/xxx.h> be converted to #include <proc/xxx.h> and similarly for asm/unit -> unit. Signed-off-by: David Howells <dhowells@redhat.com>
2009-03-30MIPS: Alchemy: PB1200: use SMC91X platform data.Manuel Lauss
Add platform data for the smc91x on the PB1200/DB1200, and remove the now unused AU1X00 entry in smc91x.h. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-23[ARM] pxa/aspenite: add support for debug ethernetEric Miao
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.hEric Miao
pxa-regs.h and hardware.h are not intended for use directly in driver code, remove those unnecessary references. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-21smc91x: enable ethtool EEPROM interfaceVernon Sauder
Signed-off-by: Vernon Sauder <vsauder@inhand.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-03smc91x: remove isa stuff from smc91x driverLuotao Fu
ISA support in smc91x is incomplete. I doubt there're any smc91x isa card. This driver is greatly used on arm pxa platforms. Hence we remove the isa stuff from smc91x driver. Signed-off-by: Luotao Fu <lfu@pengutronix.de> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29[ARM] Hide ISA DMA API when ISA_DMA_API is unsetRussell King
When ISA_DMA_API is unset, we're not implementing the ISA DMA API, so there's no point in publishing the prototypes via asm/dma.h, nor including the machine dependent parts of that API. This allows us to remove a lot of mach/dma.h files which don't contain any useful code. Unfortunately though, some platforms put their own private non-ISA definitions into mach/dma.h, so we leave these behind and fix the appropriate #include statments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] pxa: avoid polluting the kernel's namespaceRussell King
Avoid unnecessarily pollution of the kernel's namespace by avoiding mach/hardware.h. Include this header file where necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-20netdev/smc91x: unify Blackfin code a bit and use proper read/write functionsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-09-24smc91x: SMC_IO_SHIFT platform data support for default caseMagnus Damm
Commit 159198862adad7109bb347bb30a620f67beac45f added SMC_IO_SHIFT platform data support. After that ARM board support was added. The default case is still missing though, so on SuperH SMC_IO_SHIFT is constantly zero regardless of what you pass as platform data. Signed-off-by: Magnus Damm <damm@igel.co.jp> Test-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-09Add support for the Arcom/Eurotech Viper SBC onboard ethernet.Marc Zyngier
Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-09-09Export smc91x led definitionsMarc Zyngier
Now that we can configure smc91x leds from its platform data, it seems rather useful to move the led definitions to the externally visible header file. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-09-07[NET] smc91x: provide configurable ledsRussell King
This patch provides a mechanism for platforms to be able to supply the LED configuration via platform data, rather than having to hard code it in smc91x.h. Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make littleton to use the new smc91x platform dataEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make zylonite to use the new smc91x platform dataEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make mainstone to use the new smc91x platform dataEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make lubbock to use new smc91x platform dataEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform dataEric Miao
Now that the original SMC_USE_PXA_DMA specific code will always being built if CONFIG_ARCH_PXA is defined, so to make this part of the code to be PXA public, and still prevent it from being built if support of PXA is not selected. A SMC91X_USE_DMA flag is added to the platform data to allow platform to choose its usage of DMA. Note this flag itself is so named to be generic enough (assuming other platforms can also use DMA). It keeps backward compatibility to set the SMC91X_USE_DMA flag if SMC_USE_PXA_DMA is still defined. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variableEric Miao
Now one can use the following code #define SMC_IO_SHIFT lp->io_shift to make SMC_IO_SHIFT a variable. This, however, will slightly increase the CPU overhead and have negative impact on the network performance. The tradeoff is, this can be specified in the smc91x platform data so that multiple boards support can be built in a single zImage. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*Eric Miao
Let's simplify the logic and avoid confusion, the use of SMC91X_USE_* is favored than SMC_CAN_USE_*, if platform data isn't given, convert the hardcoded SMC_CAN_USE_* to SMC91X_USE_*. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-11smc91x: fix build error from the SMC_GET_MAC_ADDR API changeBryan Wu
Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-04-07Revert "smc91x: fix build breakage from the SMC_GET_MAC_ADDR API upgrade"Linus Torvalds
This reverts commit 9e6db60825ef7e7999abc610ce256ba768e58162, which was merged without the API it needed, causing build breakage. Reported-by: Bryan Wu <cooloney@kernel.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/rndis_host.c drivers/net/wireless/b43/dma.c net/ipv6/ndisc.c
2008-03-25smc91x: fix build breakage from the SMC_GET_MAC_ADDR API upgradeBryan Wu
Cc: Jeff Garzik <jeff@garzik.org> Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Nicolas Pitre <nico@cam.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17smc91x: make superh use default config V2Magnus Damm
Removes superh board specific configuration from the header file. These boards will instead be configured using platform data. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17smc91x: add insw/outsw to default config V2Magnus Damm
This patch makes sure SMC_insw()/SMC_outsw() are defined for the default configuration. Without this change BUG()s will be triggered when using 16-bit only platform data and the default configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17smc91x: introduce platform data flags V2Magnus Damm
This patch introduces struct smc91x_platdata and modifies the driver so bus width is checked during run time using SMC_nBIT() instead of SMC_CAN_USE_nBIT. V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17smc91x: pass along private data V2Magnus Damm
Pass a private data pointer to macros and functions. This makes it easy to later on make run time decisions. This patch does not change any logic. These changes should be optimized away during compilation. V2 changes the macro argument name from "priv" to "lp". Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-08mn10300: add the MN10300/AM33 architecture to the kernelDavid Howells
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28[ARM] 4746/1: pcm027: network support for phyCORE-PXA270Robert Schwebel
This patch adds SMC91x support for the phyCORE-PXA270 CPU module (aka PCM-027). Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[NET] smc91x: Make smc91x use IRQ resource trigger flagsRussell King
smc91x is shared between many different platforms. Each platform needs to specify the interrupt type, and in some cases the irq type depends on more than just the build configuration - it depends on runtime checks. Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide a way for these flags to be passed via the IRQ resource itself. Note that IRQF_TRIGGER_* constants are intentionally defined to correspond with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that the low bits of PCI iomem resources correspond with the BAR flag bits. Also provide a way to configure smc91x to read the IRQ flags from the resource. Once all platforms have been converted over (signified by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-23Blackfin SMC91x Driver: punt CONFIG_BFIN -- we already have CONFIG_BLACKFINMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10add support for smc91x ethernet interface on zyloniteeric miao
This patch adds LAN91C111 ethernet interface support for zylonite (a.k.a Marvell's PXA3xx Development Platform) with smc91x driver. It would be better if a patch would support zylonite along with all other PXA boards with a single binary of smc91x driver, but it looks quite difficult for the moment, so ugly #ifdef is still used here. Signed-off-by: Aleksey Makarov <amakarov@ru.mvista.com> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15[NET] smc91x: fix PXA DMA support codeRussell King
The PXA DMA support code for smc91x doesn't pass a struct device to the dma_*map_single() functions, which leads to an oops in the dma bounce code. We have a struct device which was used to probe the SMC chip. Use it. (This patch is slightly larger because it requires struct smc_local to move into the header file.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-10smc91x Hitachi Solution Engine (SuperH) SupportNobuhiro Iwamatsu
Hi, all. This patch supports Hitachi Solution Engine (SuperH) of smc91x. Please apply this patch . regards, Nobuhiro -- Nobuhiro Iwamatsu E-Mail : iwamatsu@nigauri.org GPG ID : 3170EBE9 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>