summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/htc.h
AgeCommit message (Collapse)Author
2011-08-10ath9k_htc: minor clean-upMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix packet timeoutSujith Manoharan
The WMI tx status event timeout was not aligning with the TX cleanup timer threshold value. Fix this to handle dropped packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix BSSID calculationSujith Manoharan
The BSSID/AID has to be set for the first associated station interface. Subsequent interfaces may move out of assoc/disassoc status, in which case, the BSSID has to be re-calculated from the available interfaces. Also, ANI should be enabled or disabled based on the current opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix station flagsSujith Manoharan
The FW does absolutely nothing with the station flags, so remove them. But keep the field around since it might come in handy in the future. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix mode selectionSujith Manoharan
Remove all the unsupported modes like FH, TURBO etc. Since this requires a FW update, increase the fw version to 1.3 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29ath9k_htc: Revamp LED managementSujith Manoharan
Remove all the convoluted hacks in the driver and simplify things by making use of mac80211's LED triggers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_htc: Add a new WMI command to set a rate maskSujith Manoharan
This patch adds WMI_BITRATE_MASK_CMDID which can be used by the set_bitrate_mask() handler. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_htc: Remove unused macros and structuresSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_htc: Fix AMPDU subframe handlingSujith Manoharan
* Register the driver's maximum ampdu subframe limit to mac80211. * Cleanup the target capabilities structure and fix an endian issue. * Fix BTCOEX by sending a command to the target when the BT priority changes. * Bump the required firmware version to 1.1 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19ath9k_htc: Cleanup HTC debugfsRajkumar Manoharan
Move the ath9k_htc debugfs under ieee80211 to be inline with ath9k driver and it also helps to simplify debug code. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Acked-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19ath9k_htc: Add debugfs support to change debug maskRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Acked-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add detailed firmware statisticsSujith Manoharan
New debugfs files: <debugfs_root>/ath9k_htc/<phy#>/tgt_int_stats <debugfs_root>/ath9k_htc/<phy#>/tgt_tx_stats <debugfs_root>/ath9k_htc/<phy#>/tgt_rx_stats Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a timer to cleanup WMI eventsSujith Manoharan
Occasionally, a WMI event would arrive ahead of the TX URB completion handler. Discarding these events would exhaust the available TX slots, so handle them by running a timer cleaning up such events. Also, timeout packets for which TX completion events have not arrived. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a debugfs file showing endpoint statusSujith Manoharan
Location: ath9k_htc/phy#/queue Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a debugfs file to dump TX slot informationSujith Manoharan
Location: ath9k_htc/phy#/slot Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add support for TX completionSujith Manoharan
Now that the infrastructure is in place, process WMI TX status events and complete packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Drain packets on station removalSujith Manoharan
When a station entry is removed, there could still be pending packets destined for that station in the HIF layer. Sending these to the target is not necessary, so drain them in the driver itself. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Drain pending TX frames properlySujith Manoharan
When doing a channel set or a reset operation the pending frames queued up for transmission have to be flushed and sent to mac80211. Fixing this has to be done in two separate steps: * Flush queued frames and kill the URB TX completion handler. * Complete all the frames that in the TX pending queue. This patch adds proper support for draining and all the callsites namely, channel change/reset/idle/stop are fixed. A separate queue is used for handling failed frames. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add TX slotsSujith Manoharan
Maintain a bitmap of slots for transmission and update the cookie field for every packet with the slot value. This value would be used for matching packets when TX completion processing is added. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Move endpoint header parsing to TX taskletSujith Manoharan
There is no need to do endpoint header removal in the ISR. Also, this is needed when TX slot management is added later on. Use a helper function to strip the driver header. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Introduce new HTC APISujith Manoharan
A new routine that takes an endpoint explicitly is introduced. The normal htc_send() now retrieves the endpoint from the packet's private data. This would be useful in TX completion when the endpoint ID would be required. While at it, use a helper function to map the queue to endpoint. Data/mgmt/beacon packets use htc_send(), while WMI comamnds pass the endpoint to HTC. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix TX queue managementSujith Manoharan
Handle queue start/stop properly by maintaining a counter to check if the pending frame count has exceeded the threshold. Otherwise, packets would be dropped needlessly. While at it, use a simple flag to track queue status and use helper functions too. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Sync MGMT/DATA packet headers with firmwareSujith Manoharan
Add a new cookie field that would be filled by the host. This can be used to match the TX status WMI event with the appropriate packet. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Move TX specific stuff to a separate structureSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Sync struct ath9k_htc_cap_target with FWSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Sync struct ath9k_htc_target_vif with FWSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Sync struct ath9k_htc_target_sta with FWSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Use SKB's private area for TX parametersSujith Manoharan
For all packets sent through the USB_WLAN_TX_PIPE endpoint, the private area of the SKB's tx_info can be used to store driver-specific information. For packets sent through USB_REG_OUT_PIPE, this will not make a difference since they are routed through a separate routine that doesn't access the private region. This would help in situations where TX information is required in the URB callback. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add RX error statisticsSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Queue WMI eventsSujith Manoharan
Use a queue to handle WMI events and schedule a tasklet to process the events. This fixes the race between the WMI event ISR and the SWBA tasklet when the arrival of WMI events in quick succession could overwrite the SWBA data before the tasklet from a previous iteration could have been scheduled. Also, drain the WMI queue properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix beacon miss under heavy loadSujith Manoharan
Transmission of beacons becomes erratic when TX load is high, since the latency involved in the generation of a SWBA interrupt on the target to the actual sending of a beacon is quite high for USB devices. Fix this by adjusting the beacon response time. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Handle buffered frames in AP modeSujith Manoharan
Use the CAB endpoint to send buffered multicast or broadcast frames after each SWBA event. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add TSF adjust capabilitySujith Manoharan
In multi-interface mode, beacons/probe responses that are sent out must have their timestamp field updated. Calculate the TSF adjustment value for each beaconing interface and set it in the frame properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add beacon slotsSujith Manoharan
Beacon transmission is now handled through a slot mechanism. This allows multiple beaconing interfaces to be be present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix WMI and beacon headerSujith Manoharan
Match the beacon header with that of the firmware. Also, the firmware reports the TSF for an SWBA, so store it. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a WMI command to get the firmware versionSujith Manoharan
Also, update the wiphy information and use the correct device pointer when registering. This would fix ethtool. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_htc: Fix LED pin for AR9287 HTC deviceRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-01ath9k_htc: Handle BSSID/AID for multiple interfacesSujith Manoharan
The AID and BSSID should be set in the HW only for the first station interface or adhoc interface. Also, cancel the ANI timer in stop() for multi-STA scenario. And finally configure the HW beacon timers only for the first station interface. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Configure beacon timers in AP modeSujith Manoharan
Handle multi-interface situations by checking if AP interfaces are already present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Add ANI for AP modeSujith Manoharan
The time granularity for the ANI task is different for AP and station mode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Allow AP interface to be createdSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Maintain individual counters for interfacesSujith Manoharan
This is required for allowing only one IBSS interface to be configured. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Make sequence number calculation per-VIFSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Set the BSSID mask for multiple interfacesSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Remove OP_ASSOCIATED variableSujith Manoharan
mac80211 stores the association state in ieee80211_bss_conf. Use this and remove the local state, which is incorrect anyway since it is stored globally and not on a per-VIF basis. Restarting ANI and reconfiguration of HW beacon timers when a scan run ends requires more work. This is handled by iterating over the active interfaces. Finally, remove the useless check for associated status in RX processing. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Remove OP_PROTECT_ENABLESujith Manoharan
CTS protection can be obtained from mac80211 directly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Remove OP_PREAMBLE_SHORTSujith Manoharan
mac80211's BSS info can be used for this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Allow upto two simultaneous interfacesSujith Manoharan
Multiple interfaces can be configured if a slot is free on the target. Monitor mode also requires a slot. The maximum number of stations that can be handled in the firmware is 8, manage the station slots accordingly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k_htc: make use common of function to update txpowerRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-17 21:48:20 +0000