summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/marvell/mwifiex/fw.h
AgeCommit message (Collapse)Author
2019-07-21mwifiex: Don't abort on small, spec-compliant vendor IEsBrian Norris
commit 63d7ef36103d26f20325a921ecc96a3288560146 upstream. Per the 802.11 specification, vendor IEs are (at minimum) only required to contain an OUI. A type field is also included in ieee80211.h (struct ieee80211_vendor_ie) but doesn't appear in the specification. The remaining fields (subtype, version) are a convention used in WMM headers. Thus, we should not reject vendor-specific IEs that have only the minimum length (3 bytes) -- we should skip over them (since we only want to match longer IEs, that match either WMM or WPA formats). We can reject elements that don't have the minimum-required 3 byte OUI. While we're at it, move the non-standard subtype and version fields into the WMM structs, to avoid this confusion in the future about generic "vendor header" attributes. Fixes: 685c9b7750bf ("mwifiex: Abort at too short BSS descriptor element") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-26mwifiex: cfg80211 set_default_mgmt_key handlerGanapathi Bhat
Previously device used to start using IGTK key as Tx key as soon as it gets downloaded in add_key(). This patch implements set_default_mgmt_key handler. We will update Tx key ID in set_default_mgmt_key(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: add custom regulatory domain supportAmitkumar Karwar
This patch creates custom regulatory rules based on the information received from firmware and enable them during wiphy registration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: add CHAN_REGION_CFG commandAmitkumar Karwar
This patch adds command preparation and response handling for CHAN_REGION_CFG command. These changes are prerequisites for adding custom regulatory domain support. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: add HT aggregation support for adhoc modeXinming Hu
This patch adds HT support for adhoc station. Firmware will upload ibss sta connect event with beacon data, whenever new station joins the adhoc network. Driver will check the HT IE and decide whether to support HT aggreagation or not. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: process rxba_sync eventXinming Hu
Firmware may filter and drop packets under certain condition, for example, ARP SA=DA packet. this event will be used to synchronize the Rx Block Acknowledgment (BA) window bitmap and to fill any holes in driver side. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: support random MAC address for scanningGanapathi Bhat
This patch advertises RANDOM_MAC_ADDR feature to cfg80211. It allow the application to issue scan with a MAC address and mask. Random MACs are generated and used in probe requests sent for scanning until it is changed by the application or device is restarted. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: Fixed endianness problem for big endian platformKarthik D A
The driver sends and recives information to and from the firmware. Correct endianness should be ensured as firmware follows little endian format and host can be little/big endian. Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-08mwifiex: Fix endianness for event TLV type TLV_BTCOEX_WL_SCANTIMEPrasun Maiti
The two members min_scan_time and max_scan_time of structure "mwifiex_ie_types_btcoex_scan_time" are of two bytes each. The values are assigned directtly from firmware without endian conversion handling. So, wrong datas will get saved in big-endian systems. This patch converts the values into cpu's byte order before assigning them into the local members. Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-05mwifiex: add get_antenna support for cfg80211Shengzhen Li
Since commit de3bb771f471 ("cfg80211: add more warnings for inconsistent ops") the wireless core warns if a driver implements a cfg80211 callback but doesn't implements the inverse operation. The mwifiex driver defines a .set_antenna handler but not a .get_antenna so this not only makes the core to print a warning when creating a new wiphy but also the antenna isn't reported to user-space apps such as iw. This patch queries the antenna to the firmware so is properly reported to user-space. With this patch, the wireless core does not warn anymore and: $ iw phy phy0 info | grep Antennas Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> [javier: expand the commit message] Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for wakeup on GTK rekey failureGanapathi Bhat
User can configure wakeup on GTK rekey fail with wowlan. Added corresponding wakeup reason. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for GTK rekey offloadGanapathi Bhat
Added driver functionality to offload GTK rekey to firmware. When AP sends new GTK, firmware will update it. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-06mwifiex: fix bandwidth display problemNachiket Kukade
Instead of using HT info from beacon IEs, use HT info from association response frame to update bandwidth in cfg80211_get_channel handler. Signed-off-by: Nachiket Kukade <kukaden@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-29mwifiex: add RSSI support for net-detectGanapathi Bhat
This patch adds support for waking up the device on finding better RSSI. Threshold RSSI value will be configured by application. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-29mwifiex: report wakeup reason to cfg80211chunfan chen
This patch adds code to report wakeup reason to cfg80211 when system is resumed. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-29mwifiex: add wowlan net-detect supportchunfan chen
This patch adds support for wakeup when configured network is detected. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-29mwifiex: add schedule scan supportXinming Hu
This patch add sched scan support for mwifiex, include cfg80211 sched_scan_start/sched_scan_stop handler, corresponding bgscan command path and event handler. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-29mwifiex: firmware download enhancementschunfan chen
Same chip is being used by WLAN as well as bluetooth drivers. Each driver needs to check during initialisation if firmware is already active or it needs to be freshly downloaded. If one driver has started downloading the firmware, other finds the winner flag as false. mwifiex_check_fw_status() checks firmware status and also check if WLAN is the winner for firmware downloading. Once we detect that other interface is downloading the firmware, we call this routine again with max poll count to wait until firmware is ready. This patch splits the routine to avoid checking winner status unnecessarily multiple times and ensures that correct messages are displayed to user. Firmware status poll count is also increased to 150. Signed-off-by: Chunfan Chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: increase supported wowlan pattern lengthXinming Hu
Maximum supported wowlan pattern length has been increased from 20 to 40. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11mwifiex: parse adhoc start/join resultAmitkumar Karwar
Even if ADHOC start or join attempt is failed, these commands are returned with success status by firmware. Actual connection result is provided inside command response. This patch parses the adhoc connection result and resets connection state variables if connection is not successful. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mwifiex: move under marvell vendor directoryKalle Valo
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-04 12:10:48 +0000