summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)Author
2019-05-08clk: x86: Add system specific quirk to mark clocks as criticalDavid Müller
commit 7c2e07130090ae001a97a6b65597830d6815e93e upstream. Since commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are unconditionally gated off. Unfortunately this will break systems where these clocks are used for external purposes beyond the kernel's knowledge. Fix it by implementing a system specific quirk to mark the necessary pmc_plt_clks as critical. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: David Müller <dave.mueller@gmx.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-05platform/x86: intel_pmc_core: Fix PCH IP sts readingRajneesh Bhardwaj
[ Upstream commit 0e68eeea9894feeba2edf7ec63e4551b87f39621 ] A previous commit "platform/x86: intel_pmc_core: Make the driver PCH family agnostic <c977b98bbef5898ed3d30b08ea67622e9e82082a>" provided better abstraction to this driver but has some fundamental issues. e.g. the following condition for (index = 0; index < pmcdev->map->ppfear_buckets && index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++) is wrong because for CNL, PPFEAR_MAX_NUM_ENTRIES is hardcoded as 5 which is _wrong_ and even though ppfear_buckets is 8, the loop fails to read all eight registers needed for CNL PCH i.e. PPFEAR0 and PPFEAR1. This patch refactors the pfear show logic to correctly read PCH IP power gating status for Cannonlake and beyond. Cc: "David E. Box" <david.e.box@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: c977b98bbef5 ("platform/x86: intel_pmc_core: Make the driver PCH family agnostic") Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13platform/x86: Fix unmet dependency warning for SAMSUNG_Q10Sinan Kaya
[ Upstream commit 0ee4b5f801b73b83a9fb3921d725f2162fd4a2e5 ] Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix: WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeupBrian Norris
[ Upstream commit 6ad16b78a039b45294b1ad5d69c14ac57b2fe706 ] EC_MKBP_EVENT_SENSOR_FIFO events can be triggered for a variety of reasons, and there are very few cases in which they should be treated as wakeup interrupts (particularly, when a certain MOTIONSENSE_MODULE_FLAG_* is set, but this is not even supported in the mainline cros_ec_sensor driver yet). Most of the time, they are benign sensor readings. In any case, the top-level cros_ec device doesn't know enough to determine that they should wake the system, and so it should not report the event. This would be the job of the cros_ec_sensors driver to parse. This patch adds checks to cros_ec_get_next_event() such that it doesn't signal 'wakeup' for events of type EC_MKBP_EVENT_SENSOR_FIFO. This patch is particularly relevant on devices like Scarlet (Rockchip RK3399 tablet, known as Acer Chromebook Tab 10), where the EC firmware reports sensor events much more frequently. This was causing /sys/power/wakeup_count to increase very frequently, often needlessly interrupting our ability to suspend the system. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-06platform/x86: asus-nb-wmi: Drop mapping of 0x33 and 0x34 scan codesJoão Paulo Rechi Vita
[ Upstream commit 71b12beaf12f21a53bfe100795d0797f1035b570 ] According to Asus firmware engineers, the meaning of these codes is only to notify the OS that the screen brightness has been turned on/off by the EC. This does not match the meaning of KEY_DISPLAYTOGGLE / KEY_DISPLAY_OFF, where userspace is expected to change the display brightness. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-06platform/x86: asus-nb-wmi: Map 0x35 to KEY_SCREENLOCKJoão Paulo Rechi Vita
[ Upstream commit b3f2f3799a972d3863d0fdc2ab6287aef6ca631f ] When the OS registers to handle events from the display off hotkey the EC will send a notification with 0x35 for every key press, independent of the backlight state. The behavior of this key on Windows, with the ATKACPI driver from Asus installed, is turning off the backlight of all connected displays with a fading effect, and any cursor input or key press turning the backlight back on. The key press or cursor input that wakes up the display is also passed through to the application under the cursor or under focus. The key that matches this behavior the closest is KEY_SCREENLOCK. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkeyJoão Paulo Rechi Vita
[ Upstream commit 78f3ac76d9e5219589718b9e4733bee21627b3f5 ] In the past, Asus firmwares would change the panel backlight directly through the EC when the display off hotkey (Fn+F7) was pressed, and only notify the OS of such change, with 0x33 when the LCD was ON and 0x34 when the LCD was OFF. These are currently mapped to KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively. Most recently the EC on Asus most machines lost ability to toggle the LCD backlight directly, but unless the OS informs the firmware it is going to handle the display toggle hotkey events, the firmware still tries change the brightness through the EC, to no effect. The end result is a long list (at Endless we counted 11) of Asus laptop models where the display toggle hotkey does not perform any action. Our firmware engineers contacts at Asus were surprised that there were still machines out there with the old behavior. Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device tells the firmware that it should let the OS handle the display toggle event, in which case it will simply notify the OS of a key press with 0x35, as shown by the DSDT excerpts bellow. Scope (_SB) { (...) Device (ATKD) { (...) Name (_WDG, Buffer (0x28) { /* 0000 */ 0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11, /* 0008 */ 0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66, /* 0010 */ 0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B, /* 0018 */ 0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A, /* 0020 */ 0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08 }) Method (WMNB, 3, Serialized) { CreateDWordField (Arg2, Zero, IIA0) CreateDWordField (Arg2, 0x04, IIA1) Local0 = (Arg1 & 0xFFFFFFFF) (...) If ((Local0 == 0x53564544)) { (...) If ((IIA0 == 0x00050011)) { If ((IIA1 == 0x02)) { ^^PCI0.SBRG.EC0.SPIN (0x72, One) ^^PCI0.SBRG.EC0.BLCT = One } Return (One) } } (...) } (...) } (...) } (...) Scope (_SB.PCI0.SBRG.EC0) { (...) Name (BLCT, Zero) (...) Method (_Q10, 0, NotSerialized) // _Qxx: EC Query { If ((BLCT == Zero)) { Local0 = One Local0 = RPIN (0x72) Local0 ^= One SPIN (0x72, Local0) If (ATKP) { Local0 = (0x34 - Local0) ^^^^ATKD.IANE (Local0) } } ElseIf ((BLCT == One)) { If (ATKP) { ^^^^ATKD.IANE (0x35) } } } (...) } Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27platform/x86: acerhdf: Add BIOS entry for Gateway LT31 v1.3307Paul Gortmaker
[ Upstream commit 684238d79ad85c5e19a71bb5818e77e329912fbc ] To fix: acerhdf: unknown (unsupported) BIOS version Gateway /LT31 /v1.3307 , please report, aborting! As can be seen in the context, the BIOS registers haven't changed in the previous versions, so the assumption is they won't have changed in this last update for this somewhat older platform either. Cc: Peter Feuerer <peter@piie.net> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Peter Feuerer <peter@piie.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27platform/x86: intel_telemetry: report debugfs failureRajneesh Bhardwaj
[ Upstream commit 8d98b1ef368feeb7720b8b9b6f3bd93f2ad892bc ] On some Goldmont based systems such as ASRock J3455M the BIOS may not enable the IPC1 device that provides access to the PMC and PUNIT. In such scenarios, the IOSS and PSS resources from the platform device can not be obtained and result in a invalid telemetry_plt_config which is an internal data structure that holds platform config and is maintained by the telemetry platform driver. This is also applicable to the platforms where the BIOS supports IPC1 device under debug configurations but IPC1 is disabled by user or the policy. This change allows user to know the reason for not seeing entries under /sys/kernel/debug/telemetry/* when there is no apparent failure at boot. Cc: Matt Turner <matt.turner@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779 Acked-by: Matt Turner <matt.turner@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-09-29platform/x86: alienware-wmi: Correct a memory leakMario Limonciello
commit ff0e9f26288d2daee4950f42b37a3d3d30d36ec1 upstream. An ACPI buffer that was allocated was not being freed after use. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26platform/x86: toshiba_acpi: Fix defined but not used build warningsRandy Dunlap
[ Upstream commit c2e2a618eb7104e18fdcf739d4d911563812a81c ] Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Azael Avalos <coproscefalo@gmail.com> Cc: platform-driver-x86@vger.kernel.org Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360Aleh Filipovich
[ Upstream commit 880b29ac107d15644bf4da228376ba3cd6af6d71 ] Add entry to WMI keymap for lid flip event on Asus UX360. On Asus Zenbook ux360 flipping lid from/to tablet mode triggers keyscan code 0xfa which cannot be handled and results in kernel log message "Unknown key fa pressed". Signed-off-by: Aleh Filipovich<aleh@appnexus.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15platform/x86: intel_punit_ipc: fix build errorsRandy Dunlap
[ Upstream commit 340fd4cff43f18bace9358d4decdc9b6ed0715be ] Fix build errors by #including <linux/io.h>. ../drivers/platform/x86/intel_punit_ipc.c: In function 'ipc_read_status': ../drivers/platform/x86/intel_punit_ipc.c:55:2: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration] return readl(ipcdev->base[type][BASE_IFACE]); ../drivers/platform/x86/intel_punit_ipc.c: In function 'ipc_write_cmd': ../drivers/platform/x86/intel_punit_ipc.c:60:2: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration] writel(cmd, ipcdev->base[type][BASE_IFACE]); Fixes: 447ae3166702 ("x86: Don't include linux/irq.h from asm/hardirq.h") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Zha Qipeng <qipeng.zha@intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05platform/x86: ideapad-laptop: Apply no_hw_rfkill to Y20-15IKBM, tooTakashi Iwai
commit 58e73aa177850babb947555257fd4f79e5275cf1 upstream. The commit 5d9f40b56630 ("platform/x86: ideapad-laptop: Add Y520-15IKBN to no_hw_rfkill") added the entry for Y20-15IKBN, and it turned out that another variant, Y20-15IKBM, also requires the no_hw_rfkill. Trim the last letter from the string so that it matches to both Y20-15IKBN and Y20-15IKBM models. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1098626 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-08platform/x86: asus-wmi: Fix NULL pointer dereferenceJoão Paulo Rechi Vita
[ Upstream commit 32ffd6e8d1f6cef94bedca15dfcdebdeb590499d ] Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05platform/chrome: cros_ec_lpc: remove redundant pointer requestColin Ian King
commit d3b56c566d4ba8cae688baf3cca94425d57ea783 upstream. Pointer request is being assigned but never used, so remove it. Cleans up the clang warning: drivers/platform/chrome/cros_ec_lpc.c:68:2: warning: Value stored to 'request' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-09platform/x86: asus-wireless: Fix NULL pointer dereferenceJoão Paulo Rechi Vita
commit 9f0a93de9139c2b0a59299cd36b61564522458f8 upstream. When the module is removed the led workqueue is destroyed in the remove callback, before the led device is unregistered from the led subsystem. This leads to a NULL pointer derefence when the led device is unregistered automatically later as part of the module removal cleanup. Bellow is the backtrace showing the problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __queue_work+0x8c/0x410 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015 RIP: 0010:__queue_work+0x8c/0x410 RSP: 0018:ffffbe8cc249fcd8 EFLAGS: 00010086 RAX: ffff992ac6810800 RBX: 0000000000000000 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff992ac6400e18 RBP: ffffbe8cc249fd18 R08: ffff992ac6400db0 R09: 0000000000000000 R10: 0000000000000040 R11: ffff992ac6400dd8 R12: 0000000000002000 R13: ffff992abd762e00 R14: ffff992abd763e38 R15: 000000000001ebe0 FS: 00007f318203e700(0000) GS:ffff992aced80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001c720e000 CR4: 00000000001406e0 Call Trace: queue_work_on+0x38/0x40 led_state_set+0x2c/0x40 [asus_wireless] led_set_brightness_nopm+0x14/0x40 led_set_brightness+0x37/0x60 led_trigger_set+0xfc/0x1d0 led_classdev_unregister+0x32/0xd0 devm_led_classdev_release+0x11/0x20 release_nodes+0x109/0x1f0 devres_release_all+0x3c/0x50 device_release_driver_internal+0x16d/0x220 driver_detach+0x3f/0x80 bus_remove_driver+0x55/0xd0 driver_unregister+0x2c/0x40 acpi_bus_unregister_driver+0x15/0x20 asus_wireless_driver_exit+0x10/0xb7c [asus_wireless] SyS_delete_module+0x1da/0x2b0 entry_SYSCALL_64_fastpath+0x24/0x87 RIP: 0033:0x7f3181b65fd7 RSP: 002b:00007ffe74bcbe18 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3181b65fd7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555ea2559258 RBP: 0000555ea25591f0 R08: 00007ffe74bcad91 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000003 R13: 00007ffe74bcae00 R14: 0000000000000000 R15: 0000555ea25591f0 Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7 RIP: __queue_work+0x8c/0x410 RSP: ffffbe8cc249fcd8 CR2: 0000000000000000 ---[ end trace 7aa4f4a232e9c39c ]--- Unregistering the led device on the remove callback before destroying the workqueue avoids this problem. https://bugzilla.kernel.org/show_bug.cgi?id=196097 Reported-by: Dun Hum <bitter.taste@gmx.com> Cc: stable@vger.kernel.org Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26platform/x86: thinkpad_acpi: suppress warning about palm detectionDavid Herrmann
[ Upstream commit 587d8628fb71c3bfae29fb2bbe84c1478c59bac8 ] This patch prevents the thinkpad_acpi driver from warning about 2 event codes returned for keyboard palm-detection. No behavioral changes, other than suppressing the warning in the kernel log. The events are still forwarded via acpi-netlink channels. We could, optionally, decide to forward the event through a input-switch on the tpacpi input device. However, so far no suitable input-code exists, and no similar drivers report such events. Hence, leave it an acpi event for now. Note that the event-codes are named based on empirical studies. On the ThinkPad X1 5th Gen the sensor can be found underneath the arrow key. Cc: Matthew Thode <mthode@mthode.org> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26platform/x86: dell-laptop: Filter out spurious keyboard backlight change eventsHans de Goede
[ Upstream commit 4d6bde512a86c32df3a1f289d2b4cd04b17758d1 ] On some Dell XPS models WMI events of type 0x0000 reporting a keycode of 0xe00c get reported when the brightness of the LCD panel changes. This leads to us reporting false-positive kbd_led change events to userspace which in turn leads to the kbd backlight OSD showing when it should not. We already read the current keyboard backlight brightness value when reporting events because the led_classdev_notify_brightness_hw_changed API requires this. Compare this value to the last known value and filter out duplicate events, fixing this. Note the fixed issue is esp. a problem on XPS models with an ambient light sensor and automatic brightness adjustments turned on, this causes the kbd backlight OSD to show all the time there. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514969 Fixes: 9c656b0799 ("platform/x86: dell-*: Call new led hw_changed API ...") Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24platform/chrome: Use proper protocol transfer functionShawn Nematbakhsh
[ Upstream commit d48b8c58c57f6edbe2965f0a5f62c5cf9593ca96 ] pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had one instance of these functions correct, but not the second, fall-back case. We use the fall-back only when the first command returns an IN_PROGRESS status, which is only used on some EC firmwares where we don't want to constantly poll the bus, but instead back off and sleep/retry for a little while. Fixes: 2c7589af3c4d ("mfd: cros_ec: add proto v3 skeleton") Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24cros_ec: fix nul-termination for firmware build infoArnd Bergmann
[ Upstream commit 50a0d71a5d20e1d3eff1d974fdc8559ad6d74892 ] As gcc-8 reports, we zero out the wrong byte: drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version': drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds] This changes the code back to what it did before changing to a zero-length array structure. Fixes: a841178445bb ("mfd: cros_ec: Use a zero-length array for command data") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410Pali Rohár
[ Upstream commit 68a213d325c23d39f109f4c7c824b906a7d209de ] This machine reports number of keyboard backlight led levels, instead of value of the last led level index. Therefore max_brightness properly needs to be subtracted by 1 to match led max_brightness API. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913 Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22Revert "apple-gmux: lock iGP IO to protect from vgaarb changes"Lukas Wunner
commit d6fa7588fd7a8def4c747c0c574ce85d453e3788 upstream. Commit 4eebd5a4e726 ("apple-gmux: lock iGP IO to protect from vgaarb changes") amended this driver's ->probe hook to lock decoding of normal (non-legacy) I/O space accesses to the integrated GPU on dual-GPU MacBook Pros. The lock stays in place until the driver is unbound. The change was made to work around an issue with the out-of-tree nvidia graphics driver (available at http://www.nvidia.com/object/unix.html). It contains the following sequence in nvidia/nv.c: #if defined(CONFIG_VGA_ARB) && !defined(NVCPU_PPC64LE) #if defined(VGA_DEFAULT_DEVICE) vga_tryget(VGA_DEFAULT_DEVICE, VGA_RSRC_LEGACY_MASK); #endif vga_set_legacy_decoding(dev, VGA_RSRC_NONE); #endif This code was reported to cause deadlocks with VFIO already in 2013: https://devtalk.nvidia.com/default/topic/545560 I've reported the issue to Nvidia developers once more in 2017: https://www.spinics.net/lists/dri-devel/msg138754.html On the MacBookPro10,1, this code apparently breaks backlight control (which is handled by apple-gmux via an I/O region starting at 0x700), as reported by Petri Hodju: https://bugzilla.kernel.org/show_bug.cgi?id=86121 I tried to replicate Petri's observations on my MacBook9,1, which uses the same Intel Ivy Bridge + Nvidia GeForce GT 650M architecture, to no avail. On my machine apple-gmux' I/O region remains accessible even with the nvidia driver loaded and commit 4eebd5a4e726 reverted. Petri reported that apple-gmux becomes accessible again after a suspend/resume cycle because the BIOS changed the VGA routing on the root port to the Nvidia GPU. Perhaps this is a BIOS issue after all that can be fixed with an update? In any case, the change made by commit 4eebd5a4e726 has turned out to cause two new issues: * Wilfried Klaebe reports a deadlock when launching Xorg because it opens /dev/vga_arbiter and calls vga_get(), but apple-gmux is holding a lock on I/O space indefinitely. It looks like apple-gmux' current behavior is an abuse of the vgaarb API as locks are not meant to be held for longer periods: https://bugzilla.kernel.org/show_bug.cgi?id=88861#c11 https://bugzilla.kernel.org/attachment.cgi?id=217541 * On dual GPU MacBook Pros introduced since 2013, the integrated GPU is powergated on boot und thus becomes invisible to Linux unless a custom EFI protocol is used to leave it powered on. (A patch exists but is not in mainline yet due to several negative side effects.) On these machines, locking I/O to the integrated GPU (as done by 4eebd5a4e726) fails and backlight control is therefore broken: https://bugzilla.kernel.org/show_bug.cgi?id=105051 So let's revert commit 4eebd5a4e726 please. Users experiencing the issue with the proprietary nvidia driver can comment out the above- quoted problematic code as a workaround (or try updating the BIOS). Cc: Petri Hodju <petrihodju@yahoo.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Andy Ritger <aritger@nvidia.com> Cc: Ronald Tschalär <ronald@innovation.ch> Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17platform/x86: wmi: Call acpi_wmi_init() laterRafael J. Wysocki
commit 98b8e4e5c17bf87c1b18ed929472051dab39878c upstream. Calling acpi_wmi_init() at the subsys_initcall() level causes ordering issues to appear on some systems and they are difficult to reproduce, because there is no guaranteed ordering between subsys_initcall() calls, so they may occur in different orders on different systems. In particular, commit 86d9f48534e8 (mm/slab: fix kmemcg cache creation delayed issue) exposed one of these issues where genl_init() and acpi_wmi_init() are both called at the same initcall level, but the former must run before the latter so as to avoid a NULL pointer dereference. For this reason, move the acpi_wmi_init() invocation to the initcall_sync level which should still be early enough for things to work correctly in the WMI land. Link: https://marc.info/?t=151274596700002&r=1&w=2 Reported-by: Jonathan McDowell <noodles@earth.li> Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25platform/x86: asus-wireless: send an EV_SYN/SYN_REPORT between state changesPeter Hutterer
commit bff5bf9db1c9453ffd0a78abed3e2d040c092fd9 upstream. Sending the switch state change twice within the same frame is invalid evdev protocol and only works if the client handles keys immediately as well. Processing events immediately is incorrect, it forces a fake order of events that does not exist on the device. Recent versions of libinput changed to only process the device state and SYN_REPORT time, so now the key event is lost. https://bugs.freedesktop.org/show_bug.cgi?id=104041 Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20platform/x86: hp_accel: Add quirk for HP ProBook 440 G4Osama Khan
[ Upstream commit 163ca80013aafb6dc9cb295de3db7aeab9ab43f8 ] Added support for HP ProBook 440 G4 laptops by including the accelerometer orientation quirk for that device. Testing was performed based on the axis orientation guidelines here: https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d which states "If the left side is elevated, X increases (becomes positive)". When tested, on lifting the left edge, x values became increasingly negative thus indicating an inverted x-axis on the installed lis3lv02d chip. This was compensated by adding an entry for this device in hp_accel.c specifying the quirk as x_inverted. The patch was tested on a ProBook 440 G4 device and x-axis as well as y and z-axis values are now generated as per spec. Signed-off-by: Osama Khan <osama.khan@ericsson.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20platform/x86: intel_punit_ipc: Fix resource ioremap warningKuppuswamy Sathyanarayanan
[ Upstream commit 6cc8cbbc8868033f279b63e98b26b75eaa0006ab ] For PUNIT device, ISPDRIVER_IPC and GTDDRIVER_IPC resources are not mandatory. So when PMC IPC driver creates a PUNIT device, if these resources are not available then it creates dummy resource entries for these missing resources. But during PUNIT device probe, doing ioremap on these dummy resources generates following warning messages. intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] This patch fixes this issue by adding extra check for resource size before performing ioremap operation. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05platform/x86: hp-wmi: Fix tablet mode detection for convertiblesStefan Brüns
commit 9968e12a291e639dd51d1218b694d440b22a917f upstream. Commit f9cf3b2880cc ("platform/x86: hp-wmi: Refactor dock and tablet state fetchers") consolidated the methods for docking and laptop mode detection, but omitted to apply the correct mask for the laptop mode (it always uses the constant for docking). Fixes: f9cf3b2880cc ("platform/x86: hp-wmi: Refactor dock and tablet state fetchers") Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21platform/x86: peaq_wmi: Fix missing terminating entry for peaq_dmi_tableHans de Goede
commit d6fa71f1c003fb2bc824276bb424a4171f9a717f upstream. Add missing terminating entry to peaq_dmi_table. Fixes: 3b95206110a2 ("platform/x86: peaq-wmi: Add DMI check before ...") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21platform/x86: peaq-wmi: Add DMI check before binding to the WMI interfaceHans de Goede
commit 3b95206110a2c13076c3a7fa8ddeae36c2dbcf42 upstream. It seems that the WMI GUID used by the PEAQ 2-in-1 WMI hotkeys is not as unique as a GUID should be and is used on some other devices too. This is causing spurious key-press reports on these other devices. This commits adds a DMI check to the PEAQ 2-in-1 WMI hotkeys driver to ensure that it is actually running on a PEAQ 2-in-1, fixing the spurious key-presses on these other devices. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1497861 BugLink: https://bugzilla.suse.com/attachment.cgi?id=743182 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23platform/x86: intel_pmc_ipc: Use spin_lock to protect GCR updatesKuppuswamy Sathyanarayanan
Currently, update_no_reboot_bit() function implemented in this driver uses mutex_lock() to protect its register updates. But this function is called with in atomic context in iTCO_wdt_start() and iTCO_wdt_stop() functions in iTCO_wdt.c driver, which in turn causes "sleeping into atomic context" issue. This patch fixes this issue by replacing the mutex_lock() with spin_lock() to protect the GCR read/write/update APIs. Fixes: 9d855d4 ("platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure") Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kupuswamy@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-10-23platform/x86: intel_pmc_ipc: Use devm_* calls in driver probe functionKuppuswamy Sathyanarayanan
This patch cleans up unnecessary free/alloc calls in ipc_plat_probe(), ipc_pci_probe() and ipc_plat_get_res() functions by using devm_* calls. This patch also adds proper error handling for failure cases in ipc_pci_probe() function. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> [andy: fixed style issues, missed devm_free_irq(), removed unnecessary log message] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-09-27platform/x86: fujitsu-laptop: Don't oops when FUJ02E3 is not presntVille Syrjälä
My Fujitsu-Siemens Lifebook S6120 doesn't have the FUJ02E3 device, but it does have FUJ02B1. That means we do register the backlight device (and it even seems to work), but the code will oops as soon as we try to set the backlight brightness because it's trying to call call_fext_func() with a NULL device. Let's just skip those function calls when the FUJ02E3 device is not present. Cc: Jonathan Woithe <jwoithe@just42.net> Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # 4.13.x Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-08Merge tag 'platform-drivers-x86-v4.14-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Several fixes from static analysis and message noise reduction. Correct WMI core and related drivers to evaluate instance number 0x0 in accordance with the documentation. Add intel-telemetry support for Gemini Lake. Various individual driver fixes noted below. dell-wmi: - Update dell_wmi_check_descriptor_buffer() to new model intel-vbtn: - reduce unnecessary messages for normal users - match power button on press rather than release intel-hid: - reduce unnecessary messages for normal users thinkpad_acpi: - Fix warning about deprecated hwmon_device_register wmi: - Fix check for method instance number ideapad-laptop: - Expose conservation mode switch intel_pmc_core: - Make the driver PCH family agnostic peaq-wmi: - Evaluate wmi method with instance number 0x0 - silence a static checker warning mxm-wmi: - Evaluate wmi method with instance number 0x0 asus-wmi: - Evaluate wmi method with instance number 0x0 intel_scu_ipc: - make intel_scu_ipc_pdata_t const intel_mid_powerbtn: - make mid_pb_ddata const - fix error return code in mid_pb_probe() hp-wmi: - Remove unused macro helper - Correctly determine method id in WMI calls dell-wmi: - Fix driver interface version query intel_telemetry: - remove redundant macro definition - Add GLK PSS Event Table alienware-wmi: - fix format string overflow warning ibm_rtl: - remove unnecessary static in ibm_rtl_write() msi-wmi: - remove unnecessary static in msi_wmi_notify()" * tag 'platform-drivers-x86-v4.14-1' of git://git.infradead.org/linux-platform-drivers-x86: (23 commits) platform/x86: dell-wmi: Update dell_wmi_check_descriptor_buffer() to new model platform/x86: intel-vbtn: reduce unnecessary messages for normal users platform/x86: intel-hid: reduce unnecessary messages for normal users platform/x86: thinkpad_acpi: Fix warning about deprecated hwmon_device_register platform/x86: wmi: Fix check for method instance number platform/x86: ideapad-laptop: Expose conservation mode switch platform/x86: intel_pmc_core: Make the driver PCH family agnostic platform/x86: peaq-wmi: Evaluate wmi method with instance number 0x0 platform/x86: mxm-wmi: Evaluate wmi method with instance number 0x0 platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0 platform/x86: intel_scu_ipc: make intel_scu_ipc_pdata_t const platform/x86: intel_mid_powerbtn: make mid_pb_ddata const platform/x86: intel_mid_powerbtn: fix error return code in mid_pb_probe() platform/x86: hp-wmi: Remove unused macro helper platform/x86: hp-wmi: Correctly determine method id in WMI calls platform/x86: intel-vbtn: match power button on press rather than release platform/x86: dell-wmi: Fix driver interface version query platform/x86: intel_telemetry: remove redundant macro definition platform/x86: intel_telemetry: Add GLK PSS Event Table platform/x86: alienware-wmi: fix format string overflow warning ...
2017-09-04Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: ACPI / PM: Check low power idle constraints for debug only PM / s2idle: Rename platform operations structure PM / s2idle: Rename ->enter_freeze to ->enter_s2idle PM / s2idle: Rename freeze_state enum and related items PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE ACPI / PM: Prefer suspend-to-idle over S3 on some systems platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle PM / suspend: Define pr_fmt() in suspend.c PM / suspend: Use mem_sleep_labels[] strings in messages PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq() PM / core: Add error argument to dpm_show_time() PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq() PM / s2idle: Rearrange the main suspend-to-idle loop PM / timekeeping: Print debug messages when requested PM / sleep: Mark suspend/hibernation start and finish PM / sleep: Do not print debug messages by default PM / suspend: Export pm_suspend_target_state
2017-08-18platform/x86: dell-wmi: Update dell_wmi_check_descriptor_buffer() to new modelAndy Lutomirski
This converts dell_wmi_check_descriptor_buffer() to the new driver model interface and puts the interface version in dell_wmi_priv where it belongs. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-18platform/x86: intel-vbtn: reduce unnecessary messages for normal usersAlex Hung
Unsupported events is only useful for developers and does not meaningful for users. Using dev_dbg makes more sense and reduces noise in kernel messages. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-18platform/x86: intel-hid: reduce unnecessary messages for normal usersAlex Hung
Unsupported events is only useful for developers and does not meaningful for users. Using dev_dbg makes more sense and reduces noise in kernel messages. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-18platform/x86: thinkpad_acpi: Fix warning about deprecated hwmon_device_registerStanislav Fomichev
Use hwmon_device_register_with_groups instead of deprecated hwmon_device_register and fix a dmesg warning. This patch however changes the userspace API. hwmon_device_register_with_groups takes `hwmon' name as an argument and creates a name file in the `hwmon' device, not in the `platform_device'. This allows us to remove custom `name' device attribute, but in order to make lm-sensors happy we also have to move fans and thermal attributes to the `hwmon' device. Even though this patch changes userspace API, it's still compatible with the lm-sensors. Starting with lm-sensors 3.0 (circa 2007), it looks at both hwmon and the backing device for the name and other attributes. before: $ cat /sys/devices/platform/thinkpad_hwmon/{name,fan1_input} thinkpad 2007 $ cat /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon1/{name,fan1_input} cat: /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon1/name: No such file or directory cat: /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon1/fan1_input: No such file or directory $ cat /sys/class/hwmon/hwmon1/{name,fan1_input} cat: /sys/class/hwmon/hwmon1/name: No such file or directory cat: /sys/class/hwmon/hwmon1/fan1_input: No such file or directory $ sensors thinkpad-isa-0000 Adapter: ISA adapter fan1: 3533 RPM after: $ cat /sys/devices/platform/thinkpad_hwmon/{name,fan1_input} cat: /sys/devices/platform/thinkpad_hwmon/name: No such file or directory cat: /sys/devices/platform/thinkpad_hwmon/fan1_input: No such file or directory $ cat /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon1/{name,fan1_input} thinkpad 3478 $ cat /sys/class/hwmon/hwmon1/{name,fan1_input} thinkpad 3478 $ sensors thinkpad-isa-0000 Adapter: ISA adapter fan1: 3489 RPM $ sensors -v sensors version 3.4.0 with libsensors version 3.4.0 Signed-off-by: Stanislav Fomichev <kernel@fomichev.me> [dvhart: cleaned up commit log, bumped version to 4.14 in the doc change] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-18platform/x86: wmi: Fix check for method instance numberPali Rohár
instance_count defines number of instances of data block and instance itself is indexed from zero, which means first instance has number 0. Therefore check for invalid instance should be non-strict inequality. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-14platform/x86: ideapad-laptop: Expose conservation mode switchHao Wei Tee
This exposes the battery conservation mode present on some (?) IdeaPads. The mode is set by calling ACPI method SBMC with argument 3 (on) or 5 (off). Status is reported in bit 5 of the return value of ACPI method GBMD. Signed-off-by: Hao Wei Tee <angelsl@in04.sg> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13platform/x86: intel_pmc_core: Make the driver PCH family agnosticSrinivas Pandruvada
Although this driver did pretty good job in abstracting PCH specific interfaces, but still there are some loose ends. For example SLP_S0 counter (for reading SLP_S0 residency), PM config offset (for checking permissions to read XRAM) and PPFEAR offset (for reading IP status) is still hardcoded for a specific family of PCH. This change extended the struct pmc_reg_map to allow per family configuration of offsets and bits. No functional change is expected with this change. This change allows seamless additions to new PCH and create a baseline for other platform specific extensions. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13platform/x86: peaq-wmi: Evaluate wmi method with instance number 0x0Pali Rohár
According to Hans de Goede, WMI interface of thh peaq-wmi module has 10 instances but corresponding ACPI WMBC method does not check Arg0 (instance number) at all. Therefore evaluate WMI method with first instance number (0x0) instead of second (0x1). Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13platform/x86: mxm-wmi: Evaluate wmi method with instance number 0x0Pali Rohár
According to MXM 2.1 specification, there is the only one instance of the WMI GUID F6CB5C3C-9CAE-4EBD-B577-931EA32A2CC0 and so it is instance 0x0. MXM 2.1 specification: https://lekensteyn.nl/files/docs/mxm-2.1-software-spec.pdf _WDG dump: // Methods GUID {F6CB5C3C-9CAE-4EBD-B577-931EA32A2CC0} 0x3C, 0x5C, 0xCB, 0xF6, 0xAE, 0x9C, 0xBD, 0x4E, 0xB5, 0x77, 0x93, 0x1E, 0xA3, 0x2A, 0x2C, 0xC0, 0x4D, 0x58, // Object ID "MX" = method "WMMX" 1, // Instance Count 0x02, // Flags (WMIACPI_REGFLAG_METHOD) Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0Pali Rohár
According to available DSDT dump from Asus machine, there is the only one instance of the WMI GUID 97845ED0-4E6D-11DE-8A39-0800200C9A66 and so it is 0x0. Moreover corresponding method WMBC does not check Arg0 (instance number) at all. DSDT dump is available at: https://lwn.net/Articles/391249/ _WDG dump: 0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11, 0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66, 0x42, 0x43, // Object ID "BC" = method "WMBC" 0x01, // Instance count 0x02, // Flags Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13platform/x86: intel_scu_ipc: make intel_scu_ipc_pdata_t constBhumika Goyal
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13platform/x86: intel_mid_powerbtn: make mid_pb_ddata constBhumika Goyal
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-11 21:23:17 +0000