summaryrefslogtreecommitdiff
path: root/drivers/scsi/scsi_devinfo.c
AgeCommit message (Collapse)Author
2009-06-21enhance device info matching for multiple tablesJames Bottomley
The current scsi_devinfo.c matching routines use a single table for the global blacklist. However, we're developing a need to blacklist from specific transports too (notably some tape drives using SPI which don't respond well to high speed protocols). Instead of developing separate blacklist matching for each transport class needing it, enhance the current list matching to permit multiple lists. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-15[SCSI] don't attach ULD to Dell Universal XportJames Bottomley
We already have blacklists for SGI, IBM and SUN versions of this; apparently there's a Dell version too. Reported-by: Thomas Witzel <witzel.thomas@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-13[SCSI] Add SUN Universal Xport to no attach blacklistILLES, Marton
I was using a Sun ST2510 device (iSCSI) and a special "block device" appeared which is used by SUN Common Array Manager in-band management. However it also appeared as a block device and caused some IO error: [ 716.868000] scsi 15:0:0:31: Direct-Access SUN Universal Xport 0735 PQ: 0 ANSI: 5 [ 716.868000] qla4xxx 0000:04:01.1: scsi(15:0:0:31): Enabled tagged queuing, queue depth 32. [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB) [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08 [ 716.868000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB) [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08 [ 716.872000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 716.872000] sdf: unknown partition table [ 716.932000] sd 15:0:0:31: [sdf] Attached SCSI disk [ 716.932000] sd 15:0:0:31: Attached scsi generic sg6 type 0 [ 717.412000] end_request: I/O error, dev sdf, sector 40 [ 717.412000] Buffer I/O error on device sdf, logical block 5 [ 717.412000] Buffer I/O error on device sdf, logical block 6 [ 717.412000] Buffer I/O error on device sdf, logical block 7 [ 717.412000] Buffer I/O error on device sdf, logical block 8 [ 717.412000] Buffer I/O error on device sdf, logical block 9 [ 717.412000] Buffer I/O error on device sdf, logical block 10 [ 717.412000] Buffer I/O error on device sdf, logical block 11 [ 717.412000] Buffer I/O error on device sdf, logical block 12 [ 717.412000] Buffer I/O error on device sdf, logical block 13 [ 717.412000] Buffer I/O error on device sdf, logical block 14 After some googling it appeared that similar issue has been solved for SGI/IBM devices in 4869040512082b761de2d7c35975d01044f8bfea, so here is the patch for SUN, please apply. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-27[SCSI] replace __FUNCTION__ with __func__Harvey Harrison
[jejb: fixed up a ton of missed conversions. All of you are on notice this has happened, driver trees will now need to be rebased] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: SCSI List <linux-scsi@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-29proc: switch /proc/scsi/device_info to seq_file interfaceAlexey Dobriyan
Note 1: 0644 should be used, but root bypasses permissions, so writing to /proc/scsi/device_info still works. Note 2: looks like scsi_dev_info_list is unprotected Note 3: probably make proc whine about "unwriteable but with ->write hook" entries. Probably. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11[SCSI] kernel-doc: use correct function nameRandy Dunlap
Use correct function name in kernel-doc. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] Add Documentation and integrate into docbook buildRob Landley
Add Documentation/DocBook/scsi_midlayer.tmpl, add to Makefile, and update lots of kerneldoc comments in drivers/scsi/*. Updated with comments from Stefan Richter, Stephen M. Cameron, James Bottomley and Randy Dunlap. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-12[SCSI] Add QUANTUM XP34301 to the blacklistMatthew Wilcox
According to the AdvanSys driver, this device has a problem with tagged queueing. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-28[SCSI] add easyRAID to the no report luns blacklistakpm@linux-foundation.org
According to http://bugzilla.kernel.org/show_bug.cgi?id=5953, the easyRAID returns rubbish to REPORT LUNS. Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Hans-Christian Armingeon <mog.johnny@gmx.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] Add Brownie 1200U3P to blacklistMatthew Wilcox
The Brownie 1200U3P has the same problem with REPORT LUNS as the 1600U3P. Add it to the blacklist. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16[SCSI] stex: fix id mapping issueEd Lin
The correct internal mapping of stex controllers should be: id:0~15, lun:0~7 (st_shasta) id:0, lun:0~127 (st_yosemite) id:0~127, lun:0 (st_vsc and st_vsc1) This patch reports the internal mapping to scsi mid layer, eliminating the translation between scsi mid layer and firmware. To achieve this goal, we also need to: -- fail the REPORT_LUNS command for st_shasta because the firmware is known to not report all actual luns -- add an entry in scsi_devindo.c to force sequential lun scan (for st_shasta controllers) -- fail the REPORT_LUNS command for console device -- remove special handling of REPORT_LUNS command for st_yosemite, as there is no translation mapping now Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01[SCSI] scsi_devinfo: scsi2 HP and Hitachi entriesMike Christie
When SCSI-2 they can support luns past 7 and sparse luns. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01[SCSI] scsi_devinfo: add nec iStorageMike Christie
support the report luns opcode . Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01[SCSI] scsi_devinfo: add TornadoMike Christie
This is from RHEL4. I do not have any info from our bugzilla. All I could find was something like this thread http://lkml.org/lkml/2005/1/7/346 Report lun for linux does not work. It may be our lun format code or it may be the device. It is probably not worth it to add anything special for this device, so the patch just adds BLIST_NOREPORTLUN. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01[SCSI] scsi_devinfo: add EMC InvistaMike Christie
This is from RHEL4. This box can support scsi2 and can also support BLIST_SPARSELUN | BLIST_LARGELUN. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] HP XP devinfo updateHannes Reinecke
According to Anthony Cheung all HP XP arrays with "OPEN-" types support REPORT_LUN. So there is no reason why we shouldn't use it. Signed-off-by: Anthony Cheung <anthony.cheung@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10Merge ../linux-2.6James Bottomley
2006-05-19[SCSI] Blacklist entry for HP dat changerThomas Bogendoerfer
after upgrading our SUN E250 from 2.4 to 2.6 I'm seeing following error when the HP DDS4 DAT changer gets probed: scsi: host 1 channel 0 id 5 lun16777216 has a LUN larger than allowed by the host adapter The device is connected to a symbios 875 host. I've talked to Willy about the problem, and he asked me to try to blacklist the device for reportlun. I did that with the patch below and it solved the problem. It now gets properly detected: target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) Vendor: HP Model: C5713A Rev: H307 Type: Sequential-Access ANSI SCSI revision: 03 target1:0:5: Beginning Domain Validation target1:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) target1:0:5: Domain Validation skipping write tests target1:0:5: Ending Domain Validation Vendor: HP Model: C5713A Rev: H307 Type: Medium Changer ANSI SCSI revision: 03 Signed-off-by: tsbogend@alpha.franken.de Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-27[SCSI] scsi: Add IBM 2104-DU3 to blistBrian King
Some versions of the IBM 2104-DU3 disk enclosure have been observed to hang Inquiries to non zero LUNs to the SES device. This device only has LUN 0, so this patch adds it to the BLIST to prevent scsi core from scanning beyond LUN 0. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14Merge ../scsi-rc-fixes-2.6James Bottomley
Conflicts: include/scsi/scsi_devinfo.h Same number for two BLIST flags: BLIST_MAX_512 and BLIST_ATTACH_PQ3 Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14[SCSI] BLIST_ATTACH_PQ3 flagsKurt Garloff
Some devices report a peripheral qualifier of 3 for LUN 0; with the original code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan. Also, the device at LUN 0 (which is not connected according to the PQ) is not registered with the OS. Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but report a unknown device with PQ 3 on LUN 0. We still need to scan them, and most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug reference for an infamous example. This is patch 3/3: 3. Implement the blacklist flag BLIST_ATTACH_PQ3 that makes the scsi scanning code register PQ3 devices and continues scanning; only sg will attach thanks to scsi_bus_match(). Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] add SCSI_UNKNOWN and LUN transfer limit restrictionsJames Bottomley
Original From: Ingo Flaschberger <if@xip.at> To support the RA4100 array from Compaq. This patch now correctly handles SCSI_UNKNOWN types with regard to BLIST_REPORTLUNS2 (allow it) and cdb[1] LUN inclusion (don't). It also allows a BLIST_MAX_512 flag to restrict the maximum transfer length to 512 blocks (apparently this is an RA4100 problem). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02[SCSI] Add Brownie to blacklistMatthew Wilcox
This device spews total rubbish to a REPORT LUNS command, so avoid sending it one. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] correct some dropped const compiler warningsJames Bottomley
Make the vendor, model and rev fields in scsi_device pointers to const and update a few prototypes of functions using them. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-17[SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.cKarl Magnus Kolstoe
The patch below should make the Pioneer DRM-624X automatically be set up with all 6 "drives". (6 slot SCSI CD changer) Signed-off-by: Karl Magnus Kolstø <karl.kolsto@uib.no> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-13[SCSI] blacklist REPORT LUNS usage on transtec arraysJames Bottomley
They report being SCSI-3 but seem to give back rubbish to a REPORT_LUNS command. Force them to be sequentially scanned. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] Universal Xport no attach blacklistAnton Blanchard
On Fri, Dec 13, 2002 at 12:24:39AM +1100, Anton Blanchard wrote: > We tested 2.5.51 on a ppc64 box, qlogic 2312 and a fastt700 array. I > had CONFIG_SCSI_REPORT_LUNS and unfortunately it thought the management > LUN was a disk: > > Vendor: IBM Model: Universal Xport Rev: 0520 > Type: Direct-Access ANSI SCSI revision: 03 > > ... > > SCSI device sdaj: drive cache: write through > SCSI device sdaj: 40960 512-byte hdwr sectors (21 MB) > sdaj: unknown partition table > Attached scsi disk sdaj at scsi2, channel 0, id 0, lun 31 > > ... > > end_request: I/O error, dev sdaj, sector 0 Three years later... It looks like SGI use the same FC vendor and they already have a workaround for this issue. The following patch adds the IBM version of it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] Make the HSG80 a REPORTLUN2 deviceJames Bottomley
From: Steve Wilcox <spwilcox@att.com> In order to properly report LUN's > 7, the DEC HSG80 definition in scsi_devinfo.c needs to include BLIST_REPORTLUN2 rather than BLIST_SPARSELUN. I've tested this change with several HSG firmware revisions and with both Emulex and Qlogic HBA's. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08[SCSI] blacklist addition.Dave Jones
When run on a kernel that scans all LUNs, a certain crappy scsi scanner reports the same LUN over and over.. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=155457 Aparently they were so shamed by this, they chose to remain anonymous. Though it seems the blacklist code handles anonymous vendors just fine. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!