summaryrefslogtreecommitdiff
path: root/drivers/staging
AgeCommit message (Collapse)Author
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits) USB: remove unused usb_buffer_alloc and usb_buffer_free macros usb: musb: update gfp/slab.h includes USB: ftdi_sio: fix legacy SIO-device header USB: kl5usb105: reimplement using generic framework USB: kl5usb105: minor clean ups USB: kl5usb105: fix memory leak USB: io_ti: use kfifo to implement write buffering USB: io_ti: remove unsused private counter USB: ti_usb: use kfifo to implement write buffering USB: ir-usb: fix incorrect write-buffer length USB: aircable: fix incorrect write-buffer length USB: safe_serial: straighten out read processing USB: safe_serial: reimplement read using generic framework USB: safe_serial: reimplement write using generic framework usb-storage: always print quirks USB: usb-storage: trivial debug improvements USB: oti6858: use port write fifo USB: oti6858: use kfifo to implement write buffering USB: cypress_m8: use kfifo to implement write buffering USB: cypress_m8: remove unused drain define ... Fix up conflicts (due to usb_buffer_alloc/free renaming) in drivers/input/tablet/acecad.c drivers/input/tablet/kbtab.c drivers/input/tablet/wacom_sys.c drivers/media/video/gspca/gspca.c sound/usb/usbaudio.c
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20USB: remove URB_NO_SETUP_DMA_MAPAlan Stern
Now that URB_NO_SETUP_DMA_MAP is no longer in use, this patch (as1376) removes all references to it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: staging: fix up usb_buffer_alloc calls in the staging treeGreg Kroah-Hartman
This renames the functions usb_buffer_alloc and usb_buffer_free to the correct ones for the drivers in the staging tree. Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: make hcd.h public (drivers dependency)Eric Lescouet
The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (534 commits) V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers V4L/DVB: vivi and mem2mem_testdev need slab.h to build V4L/DVB: tm6000: bugfix image position V4L/DVB: IR/imon: remove dead IMON_KEY_RELEASE_OFFSET V4L/DVB: tm6000: README - add vbi V4L/DVB: Fix unlock logic at medusa_video_init V4L/DVB: fix dvb frontend lockup V4L/DVB: s2255drv: remove dead code V4L/DVB: s2255drv: return if vdev not found V4L/DVB: ov511: cleanup: remove unneeded null check V4L/DVB: media/mem2mem: dereferencing free memory V4L/DVB: media/IR: Add missing include file to rc-map.c V4L/DVB: dvb/stv6110x: cleanup error handling V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to Kconfig V4L/DVB: ngene: start separating out DVB functions into separate file V4L/DVB: ngene: split out card specific code into a separate file V4L/DVB: ngene: split out i2c code into a separate file V4L/DVB: ngene: add initial support for digital side of Avermedia m780 V4L/DVB: ngene: properly support boards where channel 0 isn't a TS input V4L-DVB: ngene: make sure that tuner headers are included ...
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-19V4L/DVB (13554a): v4l: Use the video_drvdata function in driversMauro Carvalho Chehab
Fix all device drivers to use the video_drvdata function instead of maintaining a local list of minor to private data mappings. Call video_set_drvdata to register the driver private pointer when not already done. Where applicable, the local list of mappings is completely removed when it becomes unused. [mchehab.redhat.com: patch broke into two. This one changes just tm6000] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: bugfix image positionStefan Ringel
bugfix incorrect image and line position in videobuffer Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: README - add vbiStefan Ringel
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: Fix unlock logic at medusa_video_initMauro Carvalho Chehab
As reported by Dan Carpenter: > This was my patch: "cx25821: fix double unlock in medusa_video_init()" > > It accidentally got merged two times. The version from the staging tree > is not correct. Please can you revert it: > 7a02f549fcc30fe6be0c0024beae9a3db22e1af6 "Staging: cx25821: fix double > unlock in medusa_video_init()" After reviewing the logic at the function, instead of just adding a patch to revert the wrong one, the better is to apply a different logic: add a goto that will always unlock and return the error. This simplifies the code a little bit, and, instead of just return -EINVAL, it will return the error condition reported by the called functions. This patch is folded with another patch from Dan that added one missing goto. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: v4l2-common: simplify prio utility functionsHans Verkuil
v4l2_prio_init/open/close returned an int when in fact they would always return 0. Make these void functions. v4l2_prio_close and v4l2_prio_check pass an enum v4l2_priority as a pointer for no good reason. Replace with a normal enum v4l2_priority argument. These changes will simplify the work of moving priority handling into the v4l core. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: Rework for support xc5000Dmitri Belimov
Set correct GPIO number for BEHOLD_WANDER/VOYAGER Add xc5000 callback function Small rework tm6000_cards_setup function Small rework tm6000_config_tuner, build mode_mask by config information Rework for support xc5000 silicon tuner Add some information messages for more better understand an errors. [mchehab@redhat.com: Fix CodingStyle and merge conflicts] Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx25821-video-upstream.c: Added severity to printk callsRicardo Maraschini
Signed-off-by: Ricardo Maraschini <ricardo.maraschini@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: staging:cx25821:fixes coding styles in cx25821-i2c.csai
This is a patch to the cx25821-i2c.c file that fixes warning and errors found by checkpatch.pl tool [mchehab@redhat.com: fix conflicts with changeset 2587a7ef7b8bc3c7db7c43659297b45b168922ab] Signed-off-by: sai<tsg321@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: staging:cx2581: fixes coding style issues in cx25821-cards.csai
This patch fixes all the coding style issues reported by checkpatch.pl tool Signed-off-by: sai <tsg321@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx25821: fix coding style issues in cx25821-alsa.csai gopal
This is a patch to cx25821-alsa.c file that fixes of most of the warning & errors found by checkpatch.pl tool [mchehab@redhat.com: Fix conflicts with changeset 4e0c923a0d23f86c7331b32bc2aeb280e10e029e] Signed-off-by: sai gopal <tsg321@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19Fix compilation breakage with tm6000Mauro Carvalho Chehab
Randy Dunlap <randy.dunlap@oracle.com> reported a breakage while compiling drivers/staging/tm6000, due to this change: commit 1c1b78bee1a94f98deeb9c24b21c4812e191646c Author: Greg Kroah-Hartman <gregkh@suse.de> Date: Thu Apr 29 15:46:07 2010 -0700 USB: remove unused usb_buffer_alloc and usb_buffer_free macros Now that all callers are converted over, remove the compatibility functions and all is good. As the function got renamed, the rename should also be applied at tm6000. Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: update the todo listMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: Fix color format with tm6010Mauro Carvalho Chehab
The values for the fourcc format were correct, but applied to the wrong register. With this change, video is now barely working again with tm6000. While here, let's remove, for now, the memset. This way, people can have some image when testing this device. Yet to be fixed: parts of the image frame are missed. As we don't clean the buffers anymore, this is "recovered" by repeating the values from a previous frame. The quality is bad, since the image pixels will contain data from some previous frames, generating weird delay artifacts. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: fix coding style issues of tm6000-cards.cRoel Van Nyen
fix coding style issues [mchehab@redhat.com: Fix conflicts with other patches] Signed-off-by: Roel Van Nyen <roel.vannyen@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: renaming firmwareStefan Ringel
renaming tm6000-xc3028.fw to xc3028-v24.fw Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: bugfix analog init for tm6010Stefan Ringel
- change values in function tm6000_set_fourcc_format - disable digital source - add vbi and audio init Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: Don't copy outside the bufferMauro Carvalho Chehab
tm6000 tm6000_irq_callback :urb resubmit failed (error=-1) BUG: unable to handle kernel paging request at 000000000100f700 IP: [<ffffffffa007ee79>] tm6000_irq_callback+0x51e/0xac7 [tm6000] (gdb) list * tm6000_irq_callback+0x51e 0x2e79 is in tm6000_irq_callback (drivers/staging/tm6000/tm6000-video.c:363). 358 dev->isoc_ctl.tmp_buf_len--; 359 } 360 if (dev->isoc_ctl.tmp_buf_len) { 361 memcpy (&header,p, 362 dev->isoc_ctl.tmp_buf_l$ 363 memcpy (((u8 *)header)+ 364 dev->isoc_ctl.tmp_buf, 365 ptr, 366 4-dev->isoc_ctl.tmp_buf$ 367 ptr+=4-dev->isoc_ctl.tmp_buf_le$ Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: Fix a panic if buffer become NULLMauro Carvalho Chehab
Changing a video standard takes a long time to happen on tm6000, since it needs to load another firmware, and the i2c implementation on this device is really slow. When the driver tries to change the video standard, a kernel panic is produced: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffa0c7b48a>] tm6000_irq_callback+0x57f/0xac2 [tm6000] ... Kernel panic - not syncing: Fatal exception in interrupt By inspecting it with gdb: (gdb) list *tm6000_irq_callback+0x57f 0x348a is in tm6000_irq_callback (drivers/staging/tm6000/tm6000-video.c:202). 197 /* FIXME: move to tm6000-isoc */ 198 static int last_line = -2, start_line = -2, last_field = -2; 199 200 /* FIXME: this is the hardcoded window size 201 */ 202 unsigned int linewidth = (*buf)->vb.width << 1; 203 204 if (!dev->isoc_ctl.cmd) { 205 c = (header >> 24) & 0xff; 206 Clearly, it was the trial to access *buf, at line 202 that caused the Panic. As ioctl is serialized, While S_STD is handled,QBUF/DQBUF won't be called. So, the driver will run out of the buffers, and *buf will become NULL. As, on tm6000, the same URB can contain more than one video buffer, it is likely to hit a condition where no new buffer is available whily copying the streams. The fix is to leave the URB copy loop, if there's no more buffers are available. The same bug could also be produced by an application that is not fast enough to request new video buffers. The same bug were reported by Bee Hock Goh <beehock@gmail.com>. Thanks-to: Bee Hock Goh <beehock@gmail.com> for reporting the bug Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: Properly set alternate when preparing to streamMauro Carvalho Chehab
Although the code is getting the better alternates, it is not really using it. Get the interface/alternate numbers and use it where needed. This patch implements also one small fix at the last_line set, as proposed by Bee Hock Goh <behock@gmail.com>. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: Add additional GPIO for UT821 during frmware loadingBee Hock Goh
Signed-off-by: Bee Hock Goh <beehock@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: fix i2c readDmitri Belimov
Set correct limit for I2C packet. Use different method for the tm5600/tm6000 and tm6010 to read word. [mchehab@redhat.com: Fix CodingStyle] Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: fix compilation due to the lack of a semicolonMauro Carvalho Chehab
Add a missing semicolon to fix this error: In file included from drivers/staging/tm6000/tm6000-cards.c:32: drivers/staging/tm6000/tm6000.h:123: error: two or more data types in declaration specifiers Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: TM6000: Fix code which cause memory corruptionBee Hock Goh
The driver was doing malloc when buf is null causing memory corruption. The analog part is still pretty much broken but at least fixing this will stop it from crashing the machine when streamon. Signed-off-by: Bee Hock Goh <beehock@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: request labeling board version checkStefan Ringel
request labeling board version check Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: tm6000_i2c_xfer: request labelingStefan Ringel
labeling the request after tuner reading and writeing Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: add gpios for tm6010 generic boardStefan Ringel
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: add gpios to board structStefan Ringel
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tm6000: switch to gpio strcutStefan Ringel
switch to a gpio structure Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: V4L2: Replace loops for finding max buffers in VIDIOC_REQBUFS callbacksAndreas Bombe
Due to obvious copy and paste coding a number of video capture drivers which implement a limit on the buffer memory decremented the user supplied buffer count in a while loop until it reaches an acceptable value. This is a silly thing to do when the maximum value can be directly computed. Signed-off-by: Andreas Bombe <aeb@debian.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx25821: fix coding style issues in cx25821-video-upstream.cOlimpiu Pascariu
This is a patch to cx25821-video-upstream.c file that fixes up warnings and errors found by the checkpatch.pl tool Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: cx25821: prepend cx25821_ to video exported symbolsMauro Carvalho Chehab
As reported by Randy Dunlap <randy.dunlap@oracle.com>: drivers/staging/cx25821/cx25821-video.c:89:struct cx25821_fmt *format_by_fourcc(unsigned int fourcc) (not static) conflicts with (has the same non-static name as) drivers/media/common/saa7146_video.c:87:struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc) To solve, add cx25821_ prefix to the exported functions found on cx25821-video.h. This patch were generated by this little shell/perl script: cat drivers/staging/cx25821/cx25821-video.h|perl -ne \ 'if (m/extern.* ([^\s\*]+)\(/) { $n=$1; print "s/([^\d\w_\.])$1/\\1cx25821_$1/g;\n" if (!($n =~ m/cx25821/)); }' \ >changes; for i in drivers/staging/cx25821/*.[ch]; do sed -r -f changes $i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
2010-05-18V4L/DVB: cx25821-video.c: fix table indentMauro Carvalho Chehab
Table indent were likely damaged by Lindent. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
2010-05-18V4L/DVB: cx25821: fix coding style issues in cx25821-i2c.cOlimpiu Pascariu
Fixes up warnings and errors found by the checkpatch.pl tool on cx25821-i2c.c Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com> Cc: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: cx25821: fix coding style issues in cx25821-medusa-video.cOlimpiu Pascariu
Fixes up warnings and errors found by the checkpatch.pl tool on cx25821-medusa-video.c Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com> Acked-by: Dan Carpenter <error27@gmail.com> Cc: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: cx25821: fix coding style issues in cx25821-gpio.cOlimpiu Pascariu
Fixes up warnings and errors found by the checkpatch.pl tool on cx25821-gpio.c. Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com> Cc: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: cx25821: fix coding style issues in cx25821-core.cOlimpiu Pascariu
Fixes up warnings and errors found by the checkpatch.pl tool on cx25821-core.c. Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com> CC: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: cx25821-audio-upstream.c: Fixed some checkpatch.pl warnings/errorsMauro Carvalho Chehab
This patch fixes up some warnings&errors found by the checkpatch.pl script Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com> CC: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: Staging: cx25821: fix coding style issues in cx25821-alsa.cOlimpiu Pascariu
>From 9473816c446a6ca91905fc49a73732f70b5223b4 Mon Sep 17 00:00:00 2001 This is a patch to the cx25821-alsa.c file that fixes up errors and warnings found by the checkpatch.pl tool [mchehab@redhat.com: a few adjustments on the comments to improve readability] Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: tm6000: replace occurences of req05 magic by a naming aliasMauro Carvalho Chehab
Yet another naming replace magic thanks to perl scripts. This time, it is done with: cat tm6000-regs.h |perl -ne 'if (m/(TM6010_REQ[^\s]+)\s+0x([a-f0-9]+)\, 0x([a-f0-9]+)/) { $name="$1"; $req=$2; $val=$3; printf "s/REQ_${req}_SET_GET_USBREG, 0x[0]*$3,/$1,/\n" }' >a; for i in tm*.c; do sed -f a $i >b && mv b $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: tm6000: add request to registers of the group 05Mauro Carvalho Chehab
Yet another script magic. This time, the change were generated by this script: cat tm6000-regs.h |perl -ne 'if (m/^(\#define TM6010_REQ)(05)([^\s]+)(\s+)0x([A-F0-9].)/) { \ $name="$1$2$3"; $sp=$4; $req=$2; $val=$5; $val=~tr/A-F/a-f/; \ printf "$name%s0x%s, 0x%s\n", $sp, $req, $val; } else { print $_ }' \ >a; mv a tm6000-regs.h Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: tm6000: Replace naming convention for registers of req 05 groupMauro Carvalho Chehab
After looking at the "magic" registers, it is clear that usb registers belong to request 5. Replace them with this script: cat /tmp/reg3 |perl -ne 'if (m/define (TM6000_U_)([^\s]+)\s+0x([A-F0-9].)/) { \ $name=$2; $val=$3; printf "s,$1$2,TM6010_REQ05_R%s_%s,g\n", $val, $name; }' >a; sed -f a tm6000-regs.h >b; mv b tm6000-regs.h Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: tm6000: Replace all magic values by a register aliasMauro Carvalho Chehab
Instead of using magic pairs of req/reg, replace them by the defined values. This patch were generated by the following script: cat tm6000-regs.h |perl -ne 'if (m/(TM6010_REQ[^\s]+)\s+0x([a-f0-9]+)\, 0x([a-f0-9]+)/) { $name="$1"; $req=$2; $val=$3; printf "s/REQ_${req}_SET_GET_AVREG[_BIT]*, 0x[0]*$3,/$1,/\n" }' >a; for i in tm*.c; do sed -f a $i >b && mv b $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: tm6000: Add request at Req07/Req08 register definitionsMauro Carvalho Chehab
Use a pair Req/Reg for all registers at req07 and req08 groups. This makes easier to replace them at the code with a script and helps to avoid using the wrong req with some register. This change were generated by this script: if (m/^(\#define TM6010_REQ)([0-9].)([^\s]+)(\s+)0x([A-F0-9].)/) { $name="$1$2$3"; $sp=$4; $req=$2; $val=$5; $val=~tr/A-F/a-f/; printf "$name%s0x%s, 0x%s\n", $sp, $req, $val; } else { print $_ } Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-27 00:16:05 +0000