summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio.c
AgeCommit message (Collapse)Author
2014-07-11USB: serial: ftdi_sio: Add Infineon TriboardMichal Sojka
This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09USB: ftdi_sio: Add extra PID.Bert Vermeulen
This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen <bert@biot.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-07USB: ftdi_sio: remove redundant mtxorb quirkJohan Hovold
Remove redundant mtxorb quirk used to fix up incorrect wMaxPacketSize, which was added before 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet size calculation") which does the same thing for all devices. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-07USB: ftdi_sio: clean up ftdi_set_max_packet_size()Johan Hovold
Code and comment style clean ups of ftdi_set_max_packet_size(). Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-07USB: ftdi_sio: fix max-packet-size warningJohan Hovold
Promote max-packet-size-override message to warning level and use the port device for logging, while using actual endpoint numbers in the message itself. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-07USB: ftdi_sio: make port probe less verboseJohan Hovold
There's no need to print the number of endpoints per interface or endpoint wMaxPacketSize during port probe. This information is readily available using lsusb should it ever be needed. Note that this also fixes the wMaxPacketSize being incorrectly reported on big-endian systems due to a missing le16_to_cpu(). Signed-off-by: Johan Hovold <johan@kernel.org>
2014-06-23USB: ftdi_sio: fix null deref at port probeJohan Hovold
Fix NULL-pointer dereference when probing an interface with no endpoints. These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed. Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for ep_desc after the loop. Fixes: 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet size calculation") Reported-by: Mike Remski <mremski@mutualink.net> Tested-by: Mike Remski <mremski@mutualink.net> Cc: <stable@vger.kernel.org> # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org>
2014-05-27USB: ftdi_sio: add NovaTech OrionLXm product IDGeorge McCollister
The NovaTech OrionLXm uses an onboard FTDI serial converter for JTAG and console access. Here is the lsusb output: Bus 004 Device 123: ID 0403:7c90 Future Technology Devices International, Ltd Signed-off-by: George McCollister <george.mccollister@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: serial: ftdi_sio: add id for Brainboxes serial cardsMichele Baldessari
Custom VID/PIDs for Brainboxes cards as reported in https://bugzilla.redhat.com/show_bug.cgi?id=1071914 Signed-off-by: Michele Baldessari <michele@acksyn.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-26USB: ftdi_sio: add Cressi Leonardo PIDJoerg Dorchain
Hello, the following patch adds an entry for the PID of a Cressi Leonardo diving computer interface to kernel 3.13.0. It is detected as FT232RL. Works with subsurface. Signed-off-by: Joerg Dorchain <joerg@dorchain.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-05USB: ftdi_sio: add Tagsys RFID Reader IDsUlrich Hahn
Adding two more IDs to the ftdi_sio usb serial driver. It now connects Tagsys RFID readers. There might be more IDs out there for other Tagsys models. Signed-off-by: Ulrich Hahn <uhahn@eanco.de> Cc: Johan Hovold <johan@hovold.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-04usb: ftdi_sio: add Mindstorms EV3 console adapterBjørn Mork
Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08usb: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: ftdi_sio: added CS5 quirk for broken smartcard readersColin Leitner
Genuine FTDI chips support only CS7/8. A previous fix in commit 8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE setting") enforced this limitation and reported it back to userspace. However, certain types of smartcard readers depend on specific driver behaviour that requests 0 data bits (not 5) to change into a different operating mode if CS5 has been set. This patch reenables this behaviour for all FTDI devices. Tagged to be added to stable, because it affects a lot of users of embedded systems which rely on these readers to work properly. Cc: stable <stable@vger.kernel.org> Reported-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Tested-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: remove redundant OOM messagesJohan Hovold
Remove redundant error messages on allocation failures, which have already been logged. Cc: Joe Perches <joe@perches.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: clean up ioctl debuggingJohan Hovold
Remove redundant ioctl debugging from subdrivers. The ioctl request code has already been logged by usb-serial core. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: constify device-id tablesJohan Hovold
Declare device-id tables as const where possible. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-02USB: ftdi_sio: fixed handling of unsupported CSIZE settingColin Leitner
FTDI UARTs support only 7 or 8 data bits. Until now the ftdi_sio driver would only report this limitation for CS6 to dmesg and fail to reflect this fact to tcgetattr. This patch reverts the unsupported CSIZE setting and reports the fact with less severance to dmesg for both CS5 and CS6. To test the patch it's sufficient to call stty -F /dev/ttyUSB0 cs5 which will succeed without the patch and report an error with the patch applied. As an additional fix this patch ensures that the control request will always include a data bit size. Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-07Merge tag 'usb-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver update from Greg KH: "Here's the big USB driver update for 3.13-rc1. It includes the usual xhci changes, EHCI updates to get the scheduling of USB transactions working better, and a raft of gadget and musb updates as well. All of this has been in linux-next for a while with no reported issues" * tag 'usb-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (305 commits) USB: Maintainers change for usb serial drivers usb: usbtest: support container id descriptor test usb: usbtest: support superspeed device capbility descriptor test usb: usbtest: support usb2 extension descriptor test usb: chipidea: only get vbus regulator for non-peripheral mode USB: ehci-atmel: add usb_clk for transition to CCF usb: cdc-wdm: ignore speed change notifications USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macros printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages usb: usbtest: support bos descriptor test for usb 3.0 USB: phy: samsung: Support multiple PHYs of same type usb: wusbcore: change WA_SEGS_MAX to a legal value usb: wusbcore: add a quirk for Alereon HWA device isoc behavior usb: wusbcore: combine multiple isoc frames in a single transfer request. usb: wusbcore: set the RPIPE wMaxPacketSize value correctly usb: chipidea: host: more enhancement when ci->hcd is NULL usb: ohci: remove ep93xx bus glue platform driver usb: usbtest: fix checkpatch warning as sizeof code style UWB: clean up attribute use by using ATTRIBUTE_GROUPS() ...
2013-11-01USB: serial: ftdi_sio: add id for Z3X Box deviceАлексей Крамаренко
Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26USB: serial: call handle_dcd_change in ftdi driver.Paul Chavent
When the device receive a DCD status change, forward the signal to the USB serial system. This way, we can detect, for instance, PPS pulses. Signed-off-by: Paul Chavent <paul.chavent@onera.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-25USB: serial: clean up attribute permissionsGreg Kroah-Hartman
Clean up the DEVICE_ATTR usage in the USB serial drivers, making them more obvious as to the permissions that the sysfs files should be. Note: ftdi_sio.c still has a DEVICE_ATTR() used, that will have to wait until after 3.12-rc1 comes out when DEVICE_ATTR_WO() shows up in Linus's tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Merge 3.11-rc4 into usb-nextGreg Kroah-Hartman
We want those fixes in here also. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29USB: serial: ftdi_sio: add more RT Systems ftdi devicesRick Farina (Zero_Chaos)
RT Systems makes many usb serial cables based on the ftdi_sio driver for programming various amateur radios. This patch is a full listing of their current product offerings and should allow these cables to all be recognized. Signed-off-by: Rick Farina (Zero_Chaos) <zerochaos@gentoo.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ftdi_sio: remove unused definesJohan Hovold
Remove some unused defines. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ftdi_sio: remove vendor/product module parametersJohan Hovold
Remove the vendor and product module parameters which were added a long time ago when we did not have the dynamic sysfs interface to add new device ids (and which isn't limited to a single new vid/pid pair). A vid/pid pair can be added dynamically using sysfs, for example: echo 0403 1234 >/sys/bus/usb-serial/drivers/ftdi_sio/new_id Also fix up the in-code comment that got the sysfs path wrong. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ftdi_sio: remove redundant raise of DTR/RTS at openJohan Hovold
Do not raise DTR/RTS a second time in set_termios at open -- this has already been taken care of by the tty layer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: ftdi_sio: clean up device initialisationJohan Hovold
Do not use zeroed termios data to determine when to unconditionally configure the device at open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: ftdi_sio: Add support for Newport CONEX motor driversGomella, Andrew (NIH/NHLBI) [F]
Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: ftdi_sio: fix chars_in_buffer overheadJohan Hovold
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 6f602912 ("usb: serial: ftdi_sio: Add missing chars_in_buffer function") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: ftdi_sio: clean up get_modem_statusJohan Hovold
Use usb-serial port rather than tty as argument to get_modem_status. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24USB: ftdi_sio: enable two UART ports on ST Microconnect LiteAdrian Thomasset
The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23USB: ftdi_sio: correct ST Micro Connect Lite PIDsAdrian Thomasset
The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08USB: add ftdi_sio USB ID for GDM Boost V1.xStefani Seibold
This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28Merge branch 'usb-linus' into usb-nextGreg Kroah-Hartman
This lets us fix the build error that happens when these two trees are merged together. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BDKonstantin Holoborodko
It enhances the driver for FTDI-based USB serial adapters to recognize Mitsubishi Electric Corp. USB/RS422 Converters as FT232BM chips and support them. https://search.meau.com/?q=FX-USB-AW Signed-off-by: Konstantin Holoborodko <klh.kernel@gmail.com> Tested-by: Konstantin Holoborodko <klh.kernel@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: update copyright informationJohan Hovold
Update copyright information. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: ftdi_sio: switch to generic get_icount implementationJohan Hovold
Switch to the generic get_icount implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: ftdi_sio: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: ftdi_sio: use port icountJohan Hovold
Use the port-data icount for interrupt counters. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: ftdi_sio: remove obsolete port data refcountingJohan Hovold
Remove the port data refcounting and release the private data explicitly at port remove. The port data refcounting was used to make sure the port data was not freed until the last tty reference was closed. Since moving over to tty ports, the underlying assumptions are no longer valid as close is now called as part of tty port shutdown, which can occur before the final tty reference is dropped on device disconnect. This means that the private port data refcounting is now completely useless, as the last reference will always be dropped on port_remove. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-21USB: ftdi_sio: fix use-after-free in TIOCMIWAITJohan Hovold
Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. When switching to tty ports, some lifetime assumptions were changed. Specifically, close can now be called before the final tty reference is dropped as part of hangup at device disconnect. Even with the ftdi private-data refcounting this means that the port private data can be freed while a process is sleeping on modem-status changes and thus cannot be relied on to detect disconnects when woken up. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-21Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-13USB: serial: fix null-pointer dereferences on disconnectJohan Hovold
Make sure serial-driver dtr_rts is called with disc_mutex held after checking the disconnected flag. Due to a bug in the tty layer, dtr_rts may get called after a device has been disconnected and the tty-device unregistered. Some drivers have had individual checks for disconnect to make sure the disconnected interface was not accessed, but this should really be handled in usb-serial core (at least until the long-standing tty-bug has been fixed). Note that the problem has been made more acute with commit 0998d0631001 ("device-core: Ensure drvdata = NULL when no driver is bound") as the port data is now also NULL when dtr_rts is called resulting in further oopses. Reported-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-02USB: ftdi_sio: add Zolix FTDI PIDPetr Kubánek
Add support for Zolix Omni 1509 monochromator custom USB-RS232 converter. Signed-off-by: Petr Kubánek <petr@kubanek.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-02USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC IISven Killig
Add PID/VID entries for ELV WS 300 PC II weather station Signed-off-by: Sven Killig <sven@killig.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25Merge 3.8-rc5 into tty-nextGreg Kroah-Hartman
This resolves a number of tty driver merge issues found in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_flip_buffer_pushJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_insert_flip_charJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: convert more flipping functionsJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty pointer in many call sites. Only tty_port will be needed and hence no more tty_port_tty_get calls in those paths. Now 4 string flipping ones are on turn: * tty_insert_flip_string_flags * tty_insert_flip_string_fixed_flag * tty_prepare_flip_string * tty_prepare_flip_string_flags Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-13 18:12:56 +0000