summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio.c
AgeCommit message (Collapse)Author
2019-12-05USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9PFabio D'Urso
commit c1a1f273d0825774c80896b8deb1c9ea1d0b91e3 upstream. This device presents itself as a USB hub with three attached devices: - An ACM serial port connected to the GPS module (not affected by this commit) - An FTDI serial port connected to the GPS module (1546:0502) - Another FTDI serial port connected to the ODIN-W2 radio module (1546:0503) This commit registers U-Blox's VID and the PIDs of the second and third devices. Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdf Signed-off-by: Fabio D'Urso <fabiodurso@hotmail.it> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20Beni Mahler
commit 357f16d9e0194cdbc36531ff88b453481560b76a upstream. Both devices added here have a FTDI chip inside. The device from Echelon is called 'Network Interface' it is actually a LON network gateway. ID 0403:8348 Future Technology Devices International, Ltd https://www.eltako.com/fileadmin/downloads/de/datenblatt/Datenblatt_PL-SW-PROF.pdf ID 0920:7500 Network Interface https://www.echelon.com/products/u20-usb-network-interface Signed-off-by: Beni Mahler <beni.mahler@gmx.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21USB: serial: ftdi_sio: add ID for isodebug v1Andreas Fritiofson
commit f8377eff548170e8ea8022c067a1fbdf9e1c46a8 upstream. This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the second channel is available for use as a serial port. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@unjo.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03USB: serial: ftdi_sio: add additional NovaTech productsGeorge McCollister
commit 422c2537ba9d42320f8ab6573940269f87095320 upstream. Add PIDs for the NovaTech OrionLX+ and Orion I/O so they can be automatically detected. Signed-off-by: George McCollister <george.mccollister@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-13USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485Mans Rullgard
commit 8d7fa3d4ea3f0ca69554215e87411494e6346fdc upstream. This adds the USB ID of the Hjelmslund Electronics USB485 Iso stick. Signed-off-by: Mans Rullgard <mans@mansr.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-01USB: serial: ftdi_sio: use jtag quirk for Arrow USB BlasterVasyl Vavrychuk
commit 470b5d6f0cf4674be2d1ec94e54283a1770b6a1a upstream. Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID (0x0403) and product ID (0x6010) as the "original" FTDI device. This patch avoids picking up by ftdi_sio of the first interface of this USB device. After that this device can be used by Arrow user-space JTAG driver. Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulatorClemens Werther
commit 6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream. Add device id for Harman FirmwareHubEmulator to make the device auto-detectable by the driver. Signed-off-by: Clemens Werther <clemens.werther@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08USB: serial: ftdi_sio: add RT Systems VX-8 cableMajor Hayden
commit 9608e5c0f079390473b484ef92334dfd3431bb89 upstream. This patch adds a device ID for the RT Systems cable used to program Yaesu VX-8R/VX-8DR handheld radios. It uses the main FTDI VID instead of the common RT Systems VID. Signed-off-by: Major Hayden <major@mhtx.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: ftdi_sio: add id for Airbus DS P8GRMax Schulze
commit c6a36ad383559a60a249aa6016cebf3cb8b6c485 upstream. Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver. Signed-off-by: Max Schulze <max.schulze@posteo.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18USB: serial: ftdi_sio: add id for Cypress WICED dev boardJeffrey Chu
Add CYPRESS_VID vid and CYPRESS_WICED_BT_USB and CYPRESS_WICED_WL_USB device IDs to ftdi_sio driver. Signed-off-by: Jeffrey Chu <jeffrey.chu@cypress.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-06-13USB: serial: ftdi_sio: remove broken alt-speed handlingJohan Hovold
Remove the broken alt_speed code, and warn when trying to set the line speed using TIOCSSERIAL and SPD flags. The use of SPD flags to set the line speed has been deprecated since v2.1.69 and support for alt_speed (e.g. "warp") has even been removed from TTY core in v3.10 by commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*"), effectively breaking all driver implementations of this except for serial core. Also remove the verbose and outdated comment on how to set baud rates. Note that setting a custom divisor will continue to work with the caveat that 38400 must again be selected every time the divisor is changed since v2.6.24 and commit 669a6db1037e ("USB: ftd_sio: cleanups and updates for new termios work") which started reporting back the actual baud rate used. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13USB: serial: ftdi_sio: simplify TIOCSSERIAL flag logicJohan Hovold
Simplify TIOCSSERIAL flag logic somewhat. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDsAndrey Korolyov
This patch adds support for recognition of ARM-USB-TINY(H) devices which are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack and serial console. By suggestion from Johan Hovold it is possible to replace ftdi_jtag_quirk with a bit more generic construction. Since all Olimex-ARM debuggers has exactly two ports, we could safely always use only second port within the debugger family. Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-15USB: serial: ftdi_sio: fix setting latency for unprivileged usersAnthony Mallet
Commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") enables unprivileged users to set the FTDI latency timer, but there was a logic flaw that skipped sending the corresponding USB control message to the device. Specifically, the device latency timer would not be updated until next open, something which was later also inadvertently broken by commit c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe"). A recent commit c6dce2626606 ("USB: serial: ftdi_sio: fix extreme low-latency setting") disabled the low-latency mode by default so we now need this fix to allow unprivileged users to again enable it. Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> [johan: amend commit message] Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") Fixes: c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe"). Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org>
2017-04-19USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev KitMarek Vasut
This development kit has an FT4232 on it with a custom USB VID/PID. The FT4232 provides four UARTs, but only two are used. The UART 0 is used by the FlashPro5 programmer and UART 2 is connected to the SmartFusion2 CortexM3 SoC UART port. Note that the USB VID is registered to Actel according to Linux USB VID database, but that was acquired by Microsemi. Signed-off-by: Marek Vasut <marex@denx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-13USB: serial: ftdi_sio: allow other bases for "event_char"Ian Abbott
The 'store' function for the "event_char" device attribute currently expects a base 10 value. The value is composed of an enable bit in bit 8 and an 8-bit "event character" code in bits 7 to 0. It seems reasonable to allow hexadecimal and octal numbers to be written to the device attribute in addition to decimal. Make it so. Change the debug message to show the value in hexadecimal, rather than decimal. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-13USB: serial: ftdi_sio: only allow valid event_char valuesIan Abbott
The "event_char" device attribute value, when written, is interpreted as an enable bit in bit 8, and an "event character" in bits 7 to 0. Return an error -EINVAL for out-of-range values. Use kstrtouint() to parse the integer instead of the obsolete simple_strtoul(). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-13USB: serial: ftdi_sio: only allow valid latency timer valuesIan Abbott
Valid latency timer values are between 1 ms and 255 ms in 1 ms steps. The store function for the "latency_timer" device attribute currently allows any value, although only the lower 16 bits will be sent to the device, and the device only stores the lower 8 bits. The hardware appears to accept the (invalid) value 0 and treats it the same as 1 (resulting in a latency of 1 ms). Change the latency_timer_store() function to accept only the values 0 to 255, returning an error -EINVAL for out-of-range values. Call kstrtou8() to parse the integer instead of the obsolete simple_strtoul(). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-13USB: serial: ftdi_sio: detect BM chip with iSerialNumber bugIan Abbott
If a BM type chip has iSerialNumber set to 0 in its EEPROM, an incorrect value is read from the bcdDevice field of the USB descriptor, making it look like an AM type chip. Attempt to correct this in ftdi_determine_type() by attempting to read the latency timer for an AM type chip if it has iSerialNumber set to 0. If that succeeds, assume it is a BM type chip. Currently, read_latency_timer() bails out without reading the latency timer for an AM type chip, so factor out the guts of read_latency_timer() into a new function _read_latency_timer() that attempts to read the latency timer regardless of chip type, and returns either the latency timer value or a negative error number. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-13USB: serial: ftdi_sio: don't access latency timer on old chipsIan Abbott
The latency timer was introduced with the FT232BM and FT245BM chips. Do not bother attempting to read or write it for older chip versions. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-02-06USB: serial: ftdi_sio: fix line-status over-reportingJohan Hovold
FTDI devices use a receive latency timer to periodically empty the receive buffer and report modem and line status (also when the buffer is empty). When a break or error condition is detected the corresponding status flags will be set on a packet with nonzero data payload and the flags are not updated until the break is over or further characters are received. In order to avoid over-reporting break and error conditions, these flags must therefore only be processed for packets with payload. This specifically fixes the case where after an overrun, the error condition is continuously reported and NULL-characters inserted until further data is received. Reported-by: Michael Walle <michael@walle.cc> Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on break") Fixes: 166ceb690750 ("USB: ftdi_sio: clean up line-status handling") Cc: stable <stable@vger.kernel.org> # v2.6.35 Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-26USB: serial: ftdi_sio: clean up ioctl handlerJohan Hovold
Clean up the ioctl handler and make sure to pass an unsigned-int rather than serial_struct pointer to the TIOCSERGETLSR helper as this it what the user argument really is. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-25USB: serial: ftdi_sio: fix extreme low-latency settingJohan Hovold
Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") the FTDI driver has been using a receive latency-timer value of 1 ms instead of the device default of 16 ms. The latency timer is used to periodically empty a non-full receive buffer, but a status header is always sent when the timer expires including when the buffer is empty. This means that a two-byte bulk message is received every millisecond also for an otherwise idle port as long as it is open. Let's restore the pre-2009 behaviour which reduces the rate of the status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to 62.5 Hz) by not setting ASYNC_LOW_LATENCY by default. Anyone willing to pay the price for the minimum-latency behaviour should set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool such as setserial (e.g. setserial /dev/ttyUSB0 low_latency). Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but to set a minimal latency timer. Reported-by: Antoine Aubert <a.aubert@overkiz.com> Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") Cc: stable@vger.kernel.org # v2.6.31: e3e574ad85a2 Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ftdi_sio: fix latency-timer error handlingJohan Hovold
Make sure to detect short responses when reading the latency timer to avoid using stale buffer data. Note that no heap data would currently leak through sysfs as ASYNC_LOW_LATENCY is set by default. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ftdi_sio: fix modem-status error handlingJohan Hovold
Make sure to detect short responses when fetching the modem status in order to avoid parsing uninitialised buffer data and having bits of it leak to user space. Note that we still allow for short 1-byte responses. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-12-01Merge tag 'usb-serial-4.10-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.10-rc1 These updates include a new driver for Fintek F8153x devices, support for the GPIO functionality on CP2105 devices, and improved support for CH34X devices. Included are also some clean ups and fixes for various minor issues. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-11-11USB: serial: fix invalid user-pointer checksJohan Hovold
Drop invalid user-pointer checks from ioctl handlers. A NULL-pointer can be valid in user space and copy_to_user() takes care of sanity checking. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-11-07USB: serial: ftdi_sio: add support for TI CC3200 LaunchPadDoug Brown
This patch adds support for the TI CC3200 LaunchPad board, which uses a custom USB vendor ID and product ID. Channel A is used for JTAG, and channel B is used for a UART. Signed-off-by: Doug Brown <doug@schmorgal.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-17USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7Stefan Tauner
This adds support to ftdi_sio for the Infineon TriBoard TC2X7 engineering board for first-generation Aurix SoCs with Tricore CPUs. Mere addition of the device IDs does the job. Signed-off-by: Stefan Tauner <stefan.tauner@technikum-wien.at> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-08USB: serial: ftdi_sio: add device ID for WICED USB UART dev boardSheng-Hui J. Chu
BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0 UART/FIFO IC. To support BCM920706V2_EVAL dev board for WICED development on Linux. Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading ftdi_sio for this board. Signed-off-by: Sheng-Hui J. Chu <s.jeffrey.chu@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-08USB: serial: ftdi_sio: add PIDs for Ivium Technologies devicesRobert Deliën
Ivium Technologies uses the FTDI VID with custom PIDs for their line of electrochemical interfaces and the PalmSens they developed for PalmSens BV. Signed-off-by: Robert Delien <robert@delien.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-25USB: serial: ftdi_sio: constify ftdi_sio_quirk structuresJulia Lawall
The ftdi_sio_quirk structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devicesJosh Boyer
A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> CC: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-28USB: serial: fix compare_const_fl.cocci warningsMathieu OTHACEHE
Move constants to the right of binary operators where it increases readability. Generated by: scripts/coccinelle/misc/compare_const_fl.cocci Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> [johan: drop some chunks and fix others, amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-25USB: serial: ftdi_sio: add support for Yaesu SCU-18 cableGreg Kroah-Hartman
Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden <harald.linden@7183.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-08-18USB: ftdi_sio: Added custom PID for CustomWare productsMatthijs Kooijman
CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex products. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-21USB: serial: ftdi_sio: Add support for a Motion Tracker Development BoardPatrick Riphagen
This adds support for new Xsens device, Motion Tracker Development Board, using Xsens' own Vendor ID Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-25USB: ftdi_sio: Use jtag quirk for SNAP Connect E10Doug Goldstein
This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order to avoid attaching a TTY to the JTAG port as this board is based on the CALAO Systems reference design and needs the same fix up. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> CC: stable <stable@vger.kernel.org> [johan: clean up probe logic ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-16USB: ftdi_sio: Added custom PID for Synapse Wireless productDoug Goldstein
Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their SNAP Stick 200 product. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-03usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boardsMax Mansfield
This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by: Max Mansfield <max.m.mansfield@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: ftdi_sio: add PIDs for Actisense USB devicesMark Glover
These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover <mark@actisense.com> Cc: stable <stable@vger.kernel.org> [johan: edit commit message slightly ] Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-19usb: serial: ftdi_sio: add PIDs for Matrix Orbital productsTroy Clark
Add PIDs for new Matrix Orbital GTT series products. Signed-off-by: Troy Clark <tclark@matrixorbital.ca> Cc: stable <stable@vger.kernel.org> [johan: shorten commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-23usb: serial: ftdi_sio: add "bricked" FTDI device PIDPerry Hung
An official recent Windows driver from FTDI detects counterfeit devices and reprograms the internal EEPROM containing the USB PID to 0, effectively bricking the device. Add support for this VID/PID pair to correctly bind the driver on these devices. See: http://hackaday.com/2014/10/22/watch-that-windows-update-ftdi-drivers-are-killing-fake-chips/ Signed-off-by: Perry Hung <iperry@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-22usb: serial: ftdi_sio: add Awinda Station and Dongle productsFrans Klaver
Add new IDs for the Xsens Awinda Station and Awinda Dongle. While at it, order the definitions by PID and add a logical separation between devices using Xsens' VID and those using FTDI's VID. Cc: <stable@vger.kernel.org> Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-08USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker deviceTaylor Braun-Jones
Signed-off-by: Taylor Braun-Jones <taylor.braun-jones@ge.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-01USB: ftdi_sio: add support for NOVITUS Bono E thermal printerJohan Hovold
Add device id for NOVITUS Bono E thermal printer. Reported-by: Emanuel Koczwara <poczta@emanuelkoczwara.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18USB: ftdi_sio: Added PID for new ekey deviceJaša Bartelj
Added support to the ftdi_sio driver for ekey Converter USB which uses an FT232BM chip. Signed-off-by: Jaša Bartelj <jasa.bartelj@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18USB: ftdi_sio: add Basic Micro ATOM Nano USB2Serial PIDJohan Hovold
Add device id for Basic Micro ATOM Nano USB2Serial adapters. Reported-by: Nicolas Alt <n.alt@mytum.de> Tested-by: Nicolas Alt <n.alt@mytum.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-01USB: serial: ftdi_sio: Add support for new Xsens devicesPatrick Riphagen
This adds support for new Xsens devices, using Xsens' own Vendor ID. Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-16Merge tag 'usb-serial-3.17-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v3.17-rc1 Here are some minor fixes and clean-ups to the ftdi_sio, mos7840 and kl5kusb105 drivers for v3.17-rc1. Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-20 19:46:26 +0000