summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio.h
AgeCommit message (Collapse)Author
2008-05-29USB: FTDI_SIO : Add support for Matrix Orbital PID RangeRay Molenkamp
This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-20usb-serial: Use ftdi_sio driver for RATOC REX-USB60FAtsushi Nemoto
This patch reverts 57833ea6b95a3995149f1f6d1a8d8862ab7a0ba2 ("usb-serial: pl2303: add support for RATOC REX-USB60F") and adds support for the device to ftdi_sio driver. Cc: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> Cc: stable <stable@kernel.org> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add more FTDI device idsPeter Mack
Add more usb device ids to the ftdi driver. From: Peter Mack <Peter.Mack@scs-ptc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: new ftdi_sio device idMirko Bordignon
Here is a patch that adds support for the propox jtagcable II dongle (http://www.propox.com/products/t_117.html): their PID was missing, therefore we were not able to have the device recognized though it uses a standard FTDI chip. Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: ftdi_sio: Workaround for broken Matrix Orbital serial portKevin Vance
Workaround for the FT232RL-based, Matrix Orbital VK204-25-USB serial port added to the ftdi_sio driver. The device has an invalid endpoint descriptor, which must be modified before it can be used. Signed-off-by: Kevin Vance <kvance@kvance.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ftdi_sio: Support for more JTAG adaptorsHarald Welte
[PATCH] ftdi_sio: add support for more FTDI based JTAG adaptors There are more devices similar to the Olimex JTAG adaptor, in that the first port of the FT2232C is used for JTAG, and only the second port is available as UART. I have thus renamed ftdi_olimex_{probe,quirk} to ftdi_jtag_{probe,quirk} and added vendor/product ID's for the OpenMoko Neo1973 Debug Board as well as the OOCDlink device. I've also updated the KERN_INFO message sent to userspace to remove the word 'olimex' and an extra '\n' that was causing an empty line in dmesg. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ftdi driver - add support for optical probe deviceEd Beroset
Added support for the Elster Unicom III Optical Probe. The device ID has already been added to the usb.ids file. Cc: stable <stable@kernel.org> Signed-off-by: Ed Beroset <beroset@mindspring.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ftdi-sio: Patch to add vendor/device id for ATK_16IC CCDFranco Lanza
little patches only to add vendor/device id of ATK_16IC CCD cam for astronomy. From: Franco Lanza <nextime@nexlab.it> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ftdi_sio - enabling multiple ELV devices, adding EM1010PCPeter Stark
I work with a group of people on a free home automation tool called FHEM. Some of the users own more than one USB-serial device by ELV. The ftdi_sio driver has most of the ELV devices disabled by default and needs to be re-enabled every time you get a new kernel. Additionally a new device (EM 1010 PC - enegry monitor) is missing in the list. Currently our users have to follow the instructions we provide at http://www.koeniglich.de/fhem/linux.html ... However, to some users it is too complicated to compile their own kernel module. We are aware that you can specify one additional device using the vendor/product option of the module. But lot's of users own more than one device. Cc: stable <stable@kernel.org> Signed-off-by: Peter Stark <peter.stark@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-09-11USB: ftdi_sio: add of a new product/manufacturer, TMLPierre Castella
I have added to a new product based on the FTDI 232R USB/Serial transceiver, which is commercialized by The Mobility Lab. Here is a trivial patch enclosed, against 2.6.22.6 kernel. Signed-off-by: Pierre Castella <pp.castella@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: Support for the Evolution Scorpion robotsSøren Hauberg
The attached (mostly trivial) patches adds support for the Evolution Scorpion Robots. Evolution Robotics supplies a patch against 2.6.8 with their software. My patch is based on their work, so I don't know if I can sign it off, or if you need some Evolution people to do this (which might be hard). The patch adds device ID's for some robots which is trivial. From: Søren Hauberg <hauberg@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Søren
2007-06-25USB: ftdio_sio: New IPlus device IDLuiz Fernando N. Capitulino
Reported by Grzegorz Chimosz <gchimi@gmail.com> Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Add support for Olimex arm-usb-ocd JTAG interface serial portTony Lindgren
This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: ftdi_sio: Add USB Product Id for OpenDCCGuido Scholz
USB product id registration for the OpenDCC (www.opendcc.de) model railway central unit. Applies to 2.6.21.1. Signed-off-by: Guido Scholz <guido.scholz@bayernline.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: New device PID for ftdi_sio driverNeil \"Superna\" ARMSTRONG
Hello, I need to use MaxStream's PKG-U modules which includes a ftdi sio chipset for usb2serial communication, here are the patches for handling Maxstream's modules. The VID & PID to use with the open-source driver are provided on the CD-ROM bundled with the modules. From: Neil Superna ARMSTRONG <superna@na-prod.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: ftdi_sio: Add USB ID of ADSTech USBX-707Jelle Foks
This patch adds the USB ID of the ADS Tech USBX-707 USB IR blaster (that comes with the ADS Tech PTV-305 grabber card), which has a ftdi232bm inside hooked up to a pic. With this it should be fairly straightforward to make at least lirc receiving work with this device. I will submit a patch to lirc for that as soon as I have one ready, I'm getting data with minicom with this patch, but need to figure out some more details such as best/correct baudrate. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: Product ID for FT232RL in ftdi_sioGard Spreemann
Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch generates a warning during compilation because get_ftdi_divisor doesn't explicitly handle the FT232RL with this patch, so I guess you don't want to use it in its current state. It is all I could come up with with the knowledge I have of the drivers at the moment, though, and I hope you can have some use for it at least. It works fine with my DLP-TILT with an FT232RL. From: Gard Spreemann <spreeman@stud.ntnu.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: add Additional PIDs in ftdi_sioThomas Schleusener
I've developed some devices with FTDI chips (FT232xx). FTDI was so kind to give some own PID's which I can use together with their VID. Some of the devices are already very popular here and I have customers from universities, institutes ..... I use the FTDI VID 0x0403. My PID's are: 0xff38 - IBS US485 (USB<-->RS422/485 interface) 0xff39 - IBS PIC-Programmer 0xff3a - IBS Card reader for PCMCIA SRAM-cards 0xff3b - IBS PK1 - Particel counter 0xff3c - IBS RS232 - Monitor 0xff3d - APP 70 (dust monitoring system) 0xff3e - IBS PEDO-Modem (RF modem 868.35 MHz) 0xff3f - future device The company is "IBS Ing.-Buero Schleusener". From: Thomas Schleusener <thomas@be-schl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: add QL355P power supply ids to fdti_sioMichael Olberg
2007-02-23USB: ftdi_sio: Adding VID and PID for TellstickMicke Prag
I would like to add the VID and PID for Telldus Technologies Homeautomation usb-dongle to the ftdi_sio driver. From: Micke Prag <micke.prag@telldus.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: remove duplicate device id from ftdi_sioGreg Kroah-Hartman
As pointed out by Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20USB: ftdi_sio - MachX product ID addedJan Capek
below is a patch for the ftdi_sio driver to include a new device ID for CCS MachX PIC programmer. From: Jan Capek <jan@ccsinfo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-16USB: ftdi driver pid for dmx-interfacesFrank Sievertsen
Please add a usb pid to the ftdi_sio driver. The pid is used by dmx4all dmx-interfaces (for stage lighting). The interfaces are using the usb-id 0403:c850. I added the id to the driver and it works perfectly. I added a patch for linux 2.6.18.1, too. From: Frank Sievertsen <frank@sievertsen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-16USB: ftdi_sio: adds vendor/product id for a RFID construction kitKjell Myksvoll
Adds the vendor and prodcut id for a RFID construction kit from the Elektor Electronics magazine, september 2006. From: Kjell Myksvoll <kmyksvo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: add SeaLevel 2106 SeaLINK support to ftdi_sioJustin Carlson
We have a couple of these USB-Serial converters around; they're slightly different from the 2104 models in that they can handle 500Kb/sec over RS422. The existing ftdi driver seems to work just fine if we add in the appropriate IDs. Patch is against 2.6.17.6, but should apply cleanly to pretty much anything recent. From: Justin Carlson <justinca@qatar.cmu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB serial ftdi_sio: Add support for Tactrix OpenPort devicesIan Abbott
This patch adds support for three OpenPort ECU data cables from Tactrix Inc. to the ftdi_sio driver's device ID table. One of the PIDs was supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list. The other two were added by myself after examining the Windows driver software. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-07USB: New device ID for ftdi_sio usb serial driverRalf Schlatterbeck
The patch adds a new device ID for the Gamma Scout Geiger counter device. Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: ftdi_sio driver - new PIDsJonathan Davies
Signed-off-by: Jonathan Davies <jjd27@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Additional PID for the ftdi_sio driverDave Platt
Here's a short patch which adds one PID to the set of devices supported by the ftdi_sio driver. The device in question is a DLP module used as part of a ham radio USB-to-packet adapter. From: Dave Platt <dplatt@radagast.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Add one VID/PID to ftdi_sioColin Leroy
This patch adds the Testo USB interface to the list of devices recognized by the ftdi_sio module. This device is based on a FT232BL chip, and is used as an interface to get data from digital sensors (thermometer, etc). See http://www.testo.com/ Signed-off-by: Colin Leroy <colin@colino.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: new device ids for ftdi_sio driverChristophe Mariac
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: new device id for Thorlabs motor driverD. Peter Siddons
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: ftdi_sio: add support for Yost Engineering ServoCenter3.1Ian Abbott
This patch adds support for Yost Engineering Inc's ServoCenter 3.1 USB product to the ftdi_sio driver's device ID table. The PID was supplied by Aaron Prose of Yost Engineering on the ftdi-usb-sio-devel list. The PID 0xE050 matches the Windows INF files for this device. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USB: ftdi_sio: add device id for ACT Solutions HomePro ZWave interfaceRazvan Gavril
Signed-off-by: Razvan Gavril <razvan.g@plutohome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USB: ftdi_sio: Add support for HCG HF Dual ISO RFID ReaderIan Abbott
This patch adds support for ACG Identification Technologies GmbH's HF Dual ISO Reader (an RFID tag reader) to the ftdi_sio driver's device ID table. The product ID was supplied by anotonios (anton at goto10 dot org) on the ftdi-usb-sio-devel list and subsequently verified by myself (Ian Abbott). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio: add support for ASK RDR 400 series card readerIan Abbott
This patch adds support for an ASK RDR 400 series contactless card reader <http://www.ask.fr/uk/products_and_services/terminals.html> to the ftdi_sio driver's device ID table. The product ID was supplied by Adriano Couto on the ftdi-usb-sio-devel list. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio: Adds support for iPlus device.Luiz Fernando N. Capitulino
Adds support in ftdi_sio usbserial driver for USB modems sold by Plus GSM Company in Poland. Signed-off-by: Luiz Fernando Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USBNathan Bronson
This patch adds recognition of the RR-CirKits LocoBuffer USB to the existing FTDI driver. http://www.rr-cirkits.com Signed-off-by: Nathan Bronson <ngb@sns-usa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: add support for Papouch TMU (USB thermometer)Folkert van Heusden
This patch adds support for new vendor (papouch) and one of their devices - TMU (a USB thermometer). More information: vendor homepage: http://www.papouch.com/en/ product homepage (Polish): http://www.papouch.com/shop/scripts/_detail.asp?katcislo=0188 This patch is based on the submission from Folkert van Heusden [1]. Then reviseted by Kalin KOZHUHAROV [2] and retested by Folkert. [1] http://article.gmane.org/gmane.linux.kernel/392970 [2] http://article.gmane.org/gmane.linux.kernel/393386 Signed-off-by: Folkert van Heusden <folkert@vanheusden.com> Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: ftdi_sio: add support for Eclo COM to 1-Wire USB adapterIan Abbott
This patch adds support for the Eclo COM to 1-Wire USB adapter <http://www.eclo.pt/products_ibutton_adapters_usb01_en.asp> to the ftdi_sio driver's device ID table. Details were provided by Martin Grill on the ftdi-sio-usb-devel mailing list and I (Ian Abbott) confirmed it matched the INF file in the Eclo's Windows driver package. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor idsA. Maitland Bottoms
The Icom ID-1 1.2 GHz band digital transceiver is a new radio that has a USB interface. With this patch, the ftdi_sio driver will report "Detected FT8U232AM" and provide a serial device interface. Signed-off-by: "A. Maitland Bottoms" <bottoms@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: ftdi_sio: new microHAM device IDsIan Abbott
This patch adds a bunch of new device IDs to the ftdi_sio driver for various devices from microHAM using FTDI chips. Micheal Studer supplied the PID for the USB-Y9 device. I examined the INF file in microHAM's Windows driver package for the USB-KW, USB-YS, USB-IC, USB-DB9 and USB-RS232 devices. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD camerasRui Santos
Documentation: Specify grayscale specification on ATIK-ATK16 and ATIK-ATK16HR comments. New: Add ProductID and VendorID for devices ATIK-ATK16C and ATIK-ATK16HRC. These devices are also USB Astronomical CCD cameras that work through an FTDI 245BM chip, share the same base hardware but, it has a colour CCD chip instead of a grayscale one. Signed-off-by: Rui Santos <rsantos@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2Wouter Paesen
The attached patch adds a new PID for the ftdi_sio driver. It will enable support for PC-DJ's DAC-2 controller module (more information on http://www.pcdjhardware.com/DAC2.asp) Signed-off-by: Wouter Paesen <wouter@kangaroot.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi_sio: new IDs for Westrex devicesIan Abbott
This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Cory Lee to support two POS printers made by Westrex International (Model 777 and Model 8900F). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.hLouis Nyffenegger
this patch includes the Vendor Id for a optic fiber to USB device named TTUSB from thought Technology. It's just add the vendor Id to ftdi_sio.h and add the Vendor ID and model Id to table_combined. Signed-off-by: Louis Nyffenegger <louis.nyffenegger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
2006-01-04[PATCH] USB: ftdi_sio: new IDs for Teratronik devicesIan Abbott
This patch adds vendor and product IDs to the ftdi_sio driver's device ID table for two devices from teratronik.de. The device IDs were submitted by O. Wölfelschneider of Teratronik Elektronische Systeme GmbH. The charset of the patch is latin-1, same as the original files. Please apply, thanks! (I've tried to avoid a clash with Andrew Morton's patch to add support for Posiflex PP-7700 printer to the same driver.) Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: Support for Posiflex PP-7000 retail printer in LinuxPavel Fedin
This little patch adds recognition of Posiflex PP-7000 retail printer to ftdo_sio module. The printer uses FT232BM bridge programmed with custom VID/PID. The patch posted to lkml and sf.net was for 2.6.11.1 kernel, here is one reworked for 2.6.12. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-27 06:03:38 +0000