Age | Commit message (Collapse) | Author |
|
Debug allocations data for iovmm has carvout allocations
also and vice versa. Fixed it to show only iovmm for iovmm
and carveout for carveout.
Add missing "FLAGS" print for iovmm allocations.
Change-Id: I0fd271be24d0d2d3924ca473fd32476776fdcf84
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/104246
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Clean up carveout to iovmm conversion code.
Fixed bug in converting iovmm requests to carveout.
Change-Id: I35a5238c955d0478f0e1a295e501bae9ee52b0a8
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/103991
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
Change function declaration order to avoid multiple
CONFIG_TEGRA_NVMAP #ifdef's.
Change-Id: Icb10380f8da4b8037b90e787f961a28e8528814f
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/103990
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bo Yan <byan@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
nvhost_syncpt_wait_timeout() relies on sync point interrupt to
signal reaching the sync point value. With low timeout values, the
resolution is not good enough and an error is returned even when
the value is reached.
Update syncpoint value from hardware when doing a sync point wait and
do an explicit check for reaching the value even if wait returns a
timeout.
bug 984166
bug 986788
bug 987597
Change-Id: I640e32cdcdfa66b8977eac273dd32f62bd72abd6
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/103827
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
- remove usage of custom interface of nvmap to patch the relocs and
and pin the gathers/relocs
- convert code that references nvmap_handle to nvmap_handle_ref
- add logic to pin and map only unique gathers and relocs
- rename nvhost_channel_gather to nvhost_job_gather, because it's
used in nvhost_job code only
Bug 965206
Change-Id: Iaa7fbac9e4a7b08c0a7c1e184b8dd3566e1edfe2
Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/95299
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
Detect the stride size used by the bootloader.
If DC is not enabled, fallback to a default stride size.
Bug 973111
Change-Id: If04647ddf04a44987cd841062ff30e03fa4d6a02
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/104031
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Enable dsi panel B by setting the first bit
in APB_MISC_GP_MIPI_PAD_CTRL_0 register.
Bug 935764
Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
Change-Id: I9e958e0c9d9e934edf77688fd6a987b5e863392b
Reviewed-on: http://git-master/r/96672
Reviewed-by: Shashank Sharma <shashanks@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Kiran Adduri <kadduri@nvidia.com>
Reviewed-by: Animesh Kishore <ankishore@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Used free memory check in allocation policy is not working,
because it doesn't calculate available physical memory size in
same way as android oom killer.
It also breaks kernel build if swapping is enabled.
Remove free memory check from allocation policy.
Change-Id: I214d1829451f313dbace967e87ed4111e688865d
Reviewed-on: http://git-master/r/85227
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Conflicts:
arch/arm/mach-tegra/pm.c
drivers/media/video/tegra/nvavp/nvavp_dev.c
drivers/power/smb349-charger.c
include/linux/smb349-charger.h
include/trace/events/power.h
Change-Id: Ia8c82e2acfe3463ae6778bdd03aac8da104f7ad3
|
|
We support dynamic pixel-clock setting now, so open HDMI mode
filter by not rejecting a mode due to pixel clock mismatch. If the
mode's requested pixclock is within the suppoted range, check few
constraints of hardware and allow it.
Add aspect ratio check to reject modes with awkward aspect ratio.
Bug 967458
Signed-off-by: Shashank Sharma <shashanks@nvidia.com>
Change-Id: Ife474dbfe4137a000a4a43b0e1ff72847f2a8b0a
Reviewed-on: http://git-master/r/96163
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
- currently, function pointers are inside nvhost_device
- these functions abstract the device specific implementation
of a functionality per SoC
- move them to nvhost_driver so that nvhost_device can be
instantiated from arch code using board files/device trees
- add support to use single driver for multiple devices using
concept of id_table. this will be useful in supporting
multiple SoC devices binding single driver
- also add some notes about how device name is expected
Bug 871237
Change-Id: I4c75d7121d26c3bdc50f058e0d144d89ca0edbd9
Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-on: http://git-master/r/100985
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Export nvmap_duplicate_handle_id() for usage by other drivers. It is
already being used in nvavp and tegradc, and nvhost needs it to be
able to move the relocation code to inside nvhost.
Bug 965206
Change-Id: I3f818d1faa967886e834aa457a99dfdb61bc6b85
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/103587
Reviewed-by: Automatic_Commit_Validation_User
|
|
Remove the efficiency factor in the bandwidth calculation.
Clock API will take care off setting the right clock based factoring the
efficiency.
Change-Id: I2b549197778b5afaf1aab3cc87a84debb08172e8
Reviewed-on: http://git-master/r/91659
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/103682
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Change-Id: Ie6d425f06911008d77c2ed87dc7b40611755ee6a
Signed-off-by: Chao Xu <cxu@nvidia.com>
Reviewed-on: http://git-master/r/103396
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mark Stadler <mastadler@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
Change-Id: I13f0f7502aea7f43b2ddff12e9664c22a1d9bd21
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/103210
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
1. set UF_LINE_FLUSH to 0 by default.
2. if it gets 4 consecutive frames with underflows, enable UF_LINE_FLUSH to
get rid of underflow condition.
Signed-off-by: Jay Cheng <jacheng@nvidia.com>
Change-Id: I6d647d958484ee355809036bec7ca1b0c716017b
Reviewed-on: http://git-master/r/103227
Reviewed-by: Michael I Gold <gold@nvidia.com>
|
|
Adds a global alpha parameter to each window. It provides a default
alpha value for pixel formats that do not include alpha.
Change-Id: I5465864877a727b4daed0eb32fb8219e2ccb663e
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/101806
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Use nvmap.h include file from kernel/include instead of mach-tegra/include.
Bug 854182
Change-Id: I23eec4df8f69da185d08acd37ae0fba984675e92
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/102726
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Use nvmap.h include file from kernel/include instead of mach-tegra/include.
Bug 854182
Change-Id: Ibfa271191bfce371986df29a7971b1da077c3f06
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/102722
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Use nvmap.h include file from kernel/include instead of mach-tegra/include.
Bug 854182
Change-Id: I9a44471dc77d1ed7aa3b6e61a5eca4833fe6dc25
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/102721
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Use nvmap.h include file from kernel/include instead of mach-tegra/include.
Bug 854182
Change-Id: I385657f45483f2696e99fc2b4ed934fef5decd1e
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/102720
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Set correct VIC value for 1080p/30Hz mode in AVI infoframe.
Bug 969243
Change-Id: I6da9236124dbad7e4d74f3cf6dad7e273bd7778b
Signed-off-by: Youngjin Kim <nkim@nvidia.com>
Reviewed-on: http://git-master/r/100553
(cherry picked from commit 41858f2fd99face9dc0c47bd2870045291a6c0b6)
Reviewed-on: http://git-master/r/102378
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Donghan Ryu <dryu@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
To avoid border color making limited range test of MHL
certification failed.
Bug 966615
Bug 969243
Signed-off-by: Vick Yu <vyu@nvidia.com>
Change-Id: I5c9659358a1c8dac9c6a5194bbc6f59b8230f116
Reviewed-on: http://git-master/r/100552
(cherry picked from commit 20774a3db055630ba0e59669e2e7cbd412f03178)
Reviewed-on: http://git-master/r/102377
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Youngjin Kim <nkim@nvidia.com>
Tested-by: Youngjin Kim <nkim@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Donghan Ryu <dryu@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
If two threads need to wait for CDMA to become quiet at the same
time, the second one will cause a BUG(). Replace the BUG() with a
code to yield and try again.
Change-Id: I7925ad0cc0e8292919e54d0fa45f7837f453358d
Reviewed-on: http://git-master/r/102437
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
nvhost attempts to purge all buffers from timed out contexts. This is
very error prone, and not necessary. Change behavior so that only the
hung job, and the immediately following jobs from same context are
purged. This simplifies code, and corrects bug where the push buffer
modifications caused panics.
Bug 982946
Change-Id: Ifb26484cf02ef40f8d5b20338eebc0a731f453cf
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/102234
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
nvhost panics if hardware does not respond within 30 seconds. Remove
this behavior, as it causes problems in emulation and simulation.
Panic should be used only to prevent corruption.
Submits are now given a default timeout of 30 seconds. The clients
can still override with their own timeout value.
MPE doesn't provide the number of slots for context save/restore.
This information is needed to be able to use the submit timeout for
MPE.
Bug 982946
Change-Id: I0f54d639df0fb726cc3163b317bf9c90bf56798b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/100246
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
- nvhost_master holds a reference to all the channels for
a chip architecture
- however, nvhost_master is a private data of host1x hardware
device. so it should contain only members needed by host1x
hardware device
- add chip specific apis to allocate and free channels
- this will also help to remove the static binding between
nvhost_device and a channel per SoC in future
Bug 871237
Change-Id: I2148db57b995b4cb60954ebb6e670f588552eca4
Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-on: http://git-master/r/91687
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
Move WinB's format limitations to a list of preferred formats.
Bug 985197
Change-Id: Ife37c79441b2737592ace51e94ab0c80af4af917
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/102629
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Chao Xu <cxu@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Michael Frydrych <mfrydrych@nvidia.com>
Reviewed-by: Kevin Huang (Eng-SW) <kevinh@nvidia.com>
|
|
Makes function pointer type for mode_filter match the function in hdmi.c
Change-Id: Id61f319a4ddef003b79782391e9e7f2f8cb32dda
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/102630
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Shashank Sharma <shashanks@nvidia.com>
|
|
Use static for functions that are not called externally.
Change-Id: Iacccb83e31e860d10f92897041421298231e45b1
Reviewed-on: http://git-master/r/102623
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Tested-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
|
|
Bug 955184
Change-Id: I7ac0a290c2b6acd454de05d094bd676b88f4b476
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Reviewed-on: http://git-master/r/101546
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
-Move _tegra_dc_enable to before irq_request and remove
disable_dc_irq.
-It will remove warning of "IRQ when DC not powered!".
Bug 955184
Change-Id: If9b039f3f1635d92f10bfc54af08101972fc3d57
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Reviewed-on: http://git-master/r/101498
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
WAR comprises of soft reset dsi controller followed by
explicitly clearing host trigger.
Bug 982919
Change-Id: Ia8c497dd496435e429cd5b5ee8aaf1b7d78dc797
Signed-off-by: Animesh Kishore <ankishore@nvidia.com>
Reviewed-on: http://git-master/r/102204
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Move initialization for HOST1X sync point irq to nvhost driver.
Bug 871237
Change-Id: I0d31e03b43999c609194665cdcbd2f0e498d848f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/100250
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
- currently, nvhost_master holds the reference to struct
chip_support
- the struct chip_support hides the chip specific implementation
for channel submit, cdma, push buffer operations etc. so
it exposed all the internal structures through nvhost_master
- move chip_support to be a part of nvhost_bus since it only has
function pointers to chip specific api implementations
- nvhost_master is host1x device specific private data so
ideally it should not hold reference to chip specifics
Bug 871237
Change-Id: I4f3f48ee5fc47a90288d110ea8eef905150275a0
Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-on: http://git-master/r/94421
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Add display feature table so that user and kernel could set and
update window attributes properly.
Bug 962353
Change-Id: I08490a225892660126f3eefe4d5b7a4bb61d9bf7
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/101078
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Add trace events for updating the syncpt value from hardware, and
wait check.
Change-Id: If17de153ae36c0665fe0af2f405dfe42f7fcd656
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/101524
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-by: Ken Adams <kadams@nvidia.com>
|
|
Add context switch to the ftrace dump.
Change-Id: I5df032273982b919fb94263cff38d8b8b6b6be45
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/101523
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
Do not use nb_channels to find out the number of client devices.
Instead, allocate devno regions when they are needed and find a
device by module id by iterating over nvhost bus.
Bug 871237
Change-Id: I53fd0d8e5874422ef9877430c0a170db2660118a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/99067
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
Call dc_hdmi_mode_filter to validate a videomode. X prepares its
own modedb of supported HDMI modes, but all of them may not be
supported from the HDMI driver. This call makes sure a X-mode is
listed only if supported in DC driver.
Bug: 959676
Change-Id: I8aff65f4e08fcc4471af096150e3972b5913a95a
Signed-off-by: Shashank Sharma <shashanks@nvidia.com>
Reviewed-on: http://git-master/r/99650
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Set default videomode during the dc probe. This patch enables
HDMI during the probe only and fixes following issues:
1. Until Xinit there was no display on HDMI.
2. Framebuffer console on HDMI needs it to be enabled well before
Xinit.
To avoide un-necessary powering on HDMI,Check HPD and enable HDMI
only if it's present.
Bug: 930136
Bug: 977705
Change-Id: Ifb71328e5df0ccbb5751669db71fd24719fe3738
Signed-off-by: Shashank Sharma <shashanks@nvidia.com>
Reviewed-on: http://git-master/r/100656
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Add config option to enable/disable nvmap page pools.
Change-Id: I873e81a675fecd768534d4ce03c2f8fdd3c6a063
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/100424
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
when update_cdma_locked() is invoked, CDMA is not running
implies that the queue is cleared and we can return immediately.
Bug 960487
Change-Id: I599027906dc405f4490590443d4f4d5a3202b5b0
Reviewed-on: http://git-master/r/96650
(cherry picked from commit f297b4812d15540f4b14c87178662a7ca6575ce9)
Reviewed-on: http://git-master/r/99994
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
|
|
Clean up #includes. Replace #includes with forward declarations where
possible, and remove extraneous #includes.
Bug 871237
Change-Id: I6942e0c632b42ad7009589ebdd78def88ae4baa4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/99046
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
This reverts commit 9349cedf17f9b3c10760c8d48f831473f87a3a15.
It is reviewed on http://git-master/r/99635
It will cause HDMI power ON and emc clock bump up to 667Mhz
after resume from LP0.
bug 930136
Change-Id: I130494fdb381b3d322ac0e3fc8be2e44f2c2d7a7
Signed-off-by: Hunk Lin <hulin@nvidia.com>
Reviewed-on: http://git-master/r/100202
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Bug 933653
Change-Id: If7ce4dc5129782a7e3487028d2dba01c9380ba90
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/98256
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
Reviewed-by: Animesh Kishore <ankishore@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
Set window enabled flag in pan display. This fixes a blank
window display while switching console from dc_ext device to
framebuffer device, and allows dc_ext and fbdev to co-exist.
Removed previous work around to unblank fb from
tegra_dc_blank function.
Bug: 970263
Bug: 963480
Change-Id: I9853da211f78815246965d240d1717345c5ab391
Signed-off-by: Shashank Sharma <shashanks@nvidia.com>
Reviewed-on: http://git-master/r/99422
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-by: Kiran Adduri <kadduri@nvidia.com>
Reviewed-by: Allen Martin <amartin@nvidia.com>
|
|
Set default videomode during the dc probe. This patch enables
HDMI during the probe only and fixes following issues:
1. Until Xinit there was no display on HDMI.
2. Framebuffer console on HDMI needs it to be enabled well before
Xinit.
Bug: 930136
Change-Id: Ieaf5c69eefa4a6584893425ad4fd772bcd91ea11
Signed-off-by: Shashank Sharma <shashanks@nvidia.com>
Reviewed-on: http://git-master/r/99635
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
This reverts commit 90b79e5712300baab889772a5af348559ac95836.
Bug 955393
Change-Id: I0e2a15b7d0898dbbb62f09d8bd3502ec93366664
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/99261
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
Reviewed-by: Adam Cheney <acheney@nvidia.com>
Tested-by: Adam Cheney <acheney@nvidia.com>
|
|
setting max 2d clock can make noticeable performance difference
in 2d limited usecase such as buffer clearing
Change-Id: I40ef999e7eeebff45b657f00293608561cae831d
Signed-off-by: Donghan Ryu <dryu@nvidia.com>
Reviewed-on: http://git-master/r/98644
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|