Age | Commit message (Collapse) | Author |
|
Clear out all overlays and disable DC on .shutdown
Change-Id: I4bc78fddb0ed8bd621733df191f305ecb279e3f7
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/106549
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
It is not necessary that all platform do register platform
data for tegra HS uart. platfrom_data pointer should
be checked before accessing it.
Added a check for same.
bug 995731
Change-Id: I2dbbaa4387157b92b29bc7b8eacefad23372427e
Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com>
Reviewed-on: http://git-master/r/106451
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sandeep Trasi <strasi@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
HSIC device enumeration is broken after usb common
phy changes. Setting correct hsic config in port_power
and repairing wIndex in hub_control.
Bug 991485
Change-Id: Ic2873879070cba8a06fb2cadc40d6c46158f71e9
Signed-off-by: Vinayak Pane <vpane@nvidia.com>
Reviewed-on: http://git-master/r/105513
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
- Adding flag to treat warning as error.
- Warnings handled are unused functions, wrong C coding style, function argument
mismatch.
Bug 949219
Change-Id: I52cf5298ba552747dd4292af5b20db5ac8993cb0
Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-on: http://git-master/r/106208
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
|
|
Disabling the ID_WAKEUP in the suspend causing the
otg state to change to host, so disabling it in otg
suspend. Also, renaming the readl calls to otg_readl
call.
Bug 993390
Change-Id: I2789ea31fefe4425eb63b6be3e70d794bddcfd83
Signed-off-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-on: http://git-master/r/106177
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Move bandwidth calculation logic into its own file.
Change-Id: I57f58a6399805eede8783fea922c6f07dcbd54cb
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/106291
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
The current BCM4329 rfkill driver assumes usage of 2 GPIOs
known as RST and SHUTDOWN and the driver makes a particular
GPIO mandatory. Some of the platforms does not define both
GPIOs, instead a single either RST/SHUTDOWN GPIO is used to
setup the chip.
Hence print a less alarming message if gpio is not found.
Bug 975333
Signed-off-by: Preetham Chandru r <pchandru@nvidia.com>
Change-Id: I229844d9d5dfc94ea00bb086d1091ac41bf97b99
Reviewed-on: http://git-master/r/106158
Tested-by: Preetham Chandru <pchandru@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Kiran Adduri <kadduri@nvidia.com>
Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
removed tegra_dc_hdmi_mode_equal.
It was replaced by tegra_dc_hdmi_cvt_mode_equal
Change-Id: I7988d02a1c0b91eed88fdf573d8c993b6ee7be8d
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/106074
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Shashank Sharma <shashanks@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
remove and rename unused variable in tega_dc_get_stride
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Change-Id: I0d101de22c08609f9727469ad7e4708de8de59ef
Reviewed-on: http://git-master/r/106072
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
The function tegra_dc_host_trigger() is no longer used, removing it.
Change-Id: I929450bdf0224779910e8569bc8d1b3edb93f12d
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/106075
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Added void to function prototypes and initialized some variables.
Change-Id: I69250f5e17560f900fffddec9697e496af6ad4d2
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/106073
Reviewed-by: Automatic_Commit_Validation_User
|
|
Bug 992947
Change-Id: I0d1ecc9f8f042956cbe631779260a38573936616
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/105776
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Change to correct behavior for changing settings while
phase_in_adjustments is set. Manual K values should not be overridden
in the case where DIDIM was on and aggressiveness was changed.
They should maintain state to avoid flickering.
Bug 992995
Change-Id: Ic35c32a0fd5c6caaeee147dff114649ea25770c5
Signed-off-by: Matt Wagner <mwagner@nvidia.com>
Reviewed-on: http://git-master/r/105523
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Change-Id: I762929a0d72a0b26aa1451a946993f4a57806fd4
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/104292
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Kaz Fukuoka <kfukuoka@nvidia.com>
Reviewed-by: Bo Yan <byan@nvidia.com>
Reviewed-by: Hiro Sugawara <hsugawara@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Make the gpio-tps65910 as platform driver and register
this from tps65910 core driver as mfd sub device.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit 10bbc48d7a045c022a54f637c0c6b72f0e38b519)
Change-Id: Ib9419107acdaaa95052cc0fbe2efffb22c85e68d
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105928
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
The tps65910_parse_dt() prototype for !CONFIG_OF was not correct, leading to:
drivers/mfd/tps65910.c: In function ‘tps65910_i2c_probe’:
drivers/mfd/tps65910.c:218:3: error: too many arguments to function ‘tps65910_parse_dt’
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit 7f65f74ccee15f6eb0009921a428e3c5d5d06ae0)
Change-Id: I1592020268c408effc331069b7ae241c6da248bb
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105927
GVS: Gerrit_Virtual_Submit
|
|
As gpio support for tps65910 is on gpio driver, registering
gpio support as the mfd sub devices instead of calling gpio_init()
from the core probe.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit 32df986e985921386b75b4bd1117102bf65fe095)
Change-Id: I631596313528ab192d7d8c2f376965ccc989c313
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105926
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
Convert memory allocation and regmap initialization to
use devm_* functions.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit 63fe7dee9183118716078a9f2503f5f805d37c12)
Change-Id: I9b21c63031afffd1d9d1a37abf80895824f7fc7b
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105925
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
During regmap initialization, we do not provide the default value and
hence in place of caching register during regmap_init(), cache it
when actually we need it i.e. after reading of that register.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit 3bf6bf9be51a0195c6b1604454fdd28ed1cc1770)
Change-Id: I151f52436162a328b8d683fc06beba0587d6bda3
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105924
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
Add device tree based initialization support for TI's tps65910 pmic.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit cd4209ced4d3936cfe51b7b8833260457e2d9995)
Change-Id: I6f211ebcee135fd0c52662f296eee9f47f801e7a
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105923
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
This change removes the read/write callback functions in favor of common
regmap accessors inside the header file. This change also makes use of
regmap_read/write for single register access which maps better onto what this
driver actually needs.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(Cherry-pick from mainline
3f7e82759c692df473675ed06fb90b20f1f225c3)
Change-Id: Ida79b196acf65ed14ff9fd2cc1f7c0048f99ba2b
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105922
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rhyland Klein <rklein@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
A warning was being generated by the reference from tps65910_i2c_probe()
to tps65910_sleepinit() since the latter was annotated as __init but the
former was unannotated. Since these functions can only be called during
device init make them both __devinit, and while we're at it also annotate
tps65910_i2c_remove() __devexit for symmetry.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit 63745d4068de8ccea3580214c6dbfdca0ec37859)
Change-Id: I9e85e31e770c7ea68524d046b87036d6d0264523
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105921
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
Adding support for device sleep through the external input control
signal "SLEEP".
Changing the SLEEP signal state can switch the device into SLEEP and
ACTIVE state.
Also adding sleep configuration for different resources so that they
should be keep on during sleep state of device.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(Cherry-picked from mainline
201cf052810d20814a77ca0e0045a2c1a3508a1f)
Change-Id: Iec18bfcc7a1df6442e833dccaa1d39407918f710
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105920
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
This was the copy-paste issue in reg cache support code where
variable name for regmap config was not really starting from
the device name, it was starting from some other device name.
Fixing this so that variable name contains actual device name.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit 39ecb0376508b5cd20a951388d10aed2d719a77f)
Change-Id: Ife11f77952d847ae7918f11cf1e936bf5008feb4
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105918
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
Replaced kstrtoul with sscanf.
Change-Id: I1c82e92bf43d2ceba6ac3a7c0090394ba3497f13
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/105888
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
Remove BUG_ON()s in error cases:
* If IOCTL size is too large, return error instead
* If sync point id is out of range, return error. Prevents panics in
sanity checks nvhost_cdma.
Bug 993642
Change-Id: I3cfa7a23dc557c811e20b726885f82666437de7f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/105866
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
Change the mechanism of enabling the force PWM mode through
regulator set mode. This can be dynamically configured now.
In the REGULATOR_MODE_FAST the force PWM is enabled and in
REGULATOR_MODE_NORMAL the force PWM is disabled.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cherry-picked from mainline commit 9a00630
Change-Id: I39a77dbe5d0c4c2a5b81dbfe51163a65894bc98c
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105832
Reviewed-by: Automatic_Commit_Validation_User
|
|
Fix the issue -
When device connects to 2GHz AP, it does not scan
APs in 5GHz and vice-versa.
Bug 968022
Change-Id: I5dfddf4e73260cb1e03bd3d28c029503507cd898
Signed-off-by: Nitin Bindal <nbindal@nvidia.com>
Reviewed-on: http://git-master/r/104482
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Rakesh Kumar <krakesh@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Bug 949219
Change-Id: I91a67d30869e9800c483f112d58b9f76e2dbe361
Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-on: http://git-master/r/103534
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Use sg_next to get next sg
Bug 958431
Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Change-Id: I14aa7c9c551d0230b9c5b681a2699dd5355d0a6d
Reviewed-on: http://git-master/r/98449
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Tested-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
The PMIC device RC5T583 from RICOH supports 8 gpios.
Adding gpio driver for this device to access the pins
control through gpio library.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[grant.likely: slight cosmetic changes]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
(Cherry-picked from mainline
e9fe32bcadb8a7a40411d77f168abd45941b049b)
Change-Id: Id11f0dec229a92ce0ddcf606376ff83b6e14ca90
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105885
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Fixing build issue reported by Paul Gortmaker:
It appears this breaks linux-next allmodconfig build, because it
uses an uppercase V in the v2 of its MODULE_LICENSE.
FATAL: modpost: GPL-incompatible module rc5t583-regulator.ko uses
GPL-only symbol 'platform_driver_unregister'
make[2]: *** [__modpost] Error 1
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit 4eb06453648bb0d1eca3669f26798a19b6f40eb8)
Change-Id: I8c715cf5a8e72555721a954d6db6879aed2eb423
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105884
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
The nsteps can be calculated by (_max_mv - _min_mv) * 1000 / _step_uV + 1,
thus we can remove _nsteps from RC5T583_REG macro, and then remove
nsteps from struct rc5t583_regulator_info.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit e3a7384c3e98c48b5f122e449e22cc8a1a6c7e0d)
Change-Id: If6db39255b2f7f8be38b848f2ca2619301b19b38
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105883
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
The valid selector should be 0 ... nsteps-1.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit 9cc7a453b637d8c1f628f9873204ff55d7aa664c)
Change-Id: Ie1a39883036de3b2945d35854e0a16c46d2a9db2
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105882
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
1. regulator_register returns ERR_PTR on error, thus use IS_ERR to check the
return value.
2. Fix off-by-one for unregistering the registered regulator.
Current code does not unregister regs[0].rdev in clean_exit.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit a69df8a14ae7b891ee22f0e4c081f3ff65c0640f)
Change-Id: Ib5e00e655020e313c73e5b838e62dbdea54c28d0
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105881
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit f8dddc0cfe9f56ed74fd5efde8d0754f5fb73a3f)
Change-Id: I72d44f59c79abbbdac95398a5d4da2bedf19d8f1
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105880
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Adding the gpio of RC583 in the list of rc583 mfd devices
to register the gpio driver of RC5T583.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit e1277f45d8748ff59608b140780f75390cb5400c)
Change-Id: Iea2ccf7831c331d1ad08f96100d4222cce31224f
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105879
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
The combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957
"mfd: Add support for RICOH PMIC RC5T583"
and commit 6ffc3270210efa2bea526953a142ffc908f5bd86
"regulator: Add support for RICOH PMIC RC5T583 regulator"
are causing the i386 allmodconfig builds to fail with this:
ERROR: "rc5t583_update" [drivers/regulator/rc5t583-regulator.ko] undefined!
ERROR: "rc5t583_set_bits" [drivers/regulator/rc5t583-regulator.ko] undefined!
ERROR: "rc5t583_clear_bits" [drivers/regulator/rc5t583-regulator.ko] undefined!
ERROR: "rc5t583_read" [drivers/regulator/rc5t583-regulator.ko] undefined!
and this:
ERROR: "rc5t583_ext_power_req_config" [drivers/regulator/rc5t583-regulator.ko] undefined!
For the 1st four, make the simple ops static inline, instead of
polluting the namespace with trivial exports. For the last one,
add an EXPORT_SYMBOL.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
(cherry picked from commit 82ea267f7dc853a5e6a724916a70a10656efdfc2)
Change-Id: I7f03cc5c0005883eb8355170cdc7996a9c392091
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105878
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
The RC5T583 PMIC from RICOH consists of 4 DCDC and 10
LDOs. This driver supports the control of different
regulator output through regulator interface.
This driver depends on MFD driver of RC5T583 and uses
mfd rc5t583 apis to communicate to device for accessing
different device's registers.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(Cherry-picked from mainline commit
6ffc3270210efa2bea526953a142ffc908f5bd86)
Change-Id: If6bcc9c987fc97ff6f0c61e53de715cd84d0151b
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105877
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Register access (read/write) to modules MPE, ISP and VI lack sanity
check for the register number. Add checks to ensure only aperture is
accessed. Also make sure that the check accounts for wrapping of
values of offset and count.
Also fixes the register offset for reads which are done in multiple
blocks.
Bug 992938
Change-Id: I35f30cbd1dda31956286e48c5995b24fd262d1ae
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/105585
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
Added support for audio channel.
Push buffers can be submitted on audio channel.
bug 964514
Change-Id: Ib13b6ed41678e9dcc170fddc64ab4646f960838b
Signed-off-by: Vandana Salve <vsalve@nvidia.com>
Reviewed-on: http://git-master/r/97534
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Gajanan Bhat <gbhat@nvidia.com>
|
|
Fix multiple stylistic issue like:
- The print message should be not break into multiple line.
- line gap after variable declaration and statement.
- checkpatch error.
- some typo.
Some enhancement on error message printing to print error value
also along with proper text.
Avoid voltage_base conversion to microvolts every time.
Put init functions in init section.
Using efficient function inplace of calling multiple function
to reduce the code size.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit 2935fb18aa1e75e6afaab3303cdd1a4ac62be63e)
Change-Id: I988938f8f8cc6fb5355e32bd6ac25d95db94913c
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105831
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Settling time is require when there is voltage output change.
Implement set_voltage_time_sel() callback which returns delay time
for voltage change to settle down to new value.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit a60cfce051dd5e22329df1018d278bf3e52d82bc)
Change-Id: I522df8a72595622fd99cc46043c34610434d932f
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105830
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Enable cache of device register using regmap cache RBTREE.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit 16ea003bd1c95ea55a0b88187ce7cbeaca760fcf)
Change-Id: If747dd18a488d500f8295f903c8da92c241c293e
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105829
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit 9a4bdd87a29bf297d9046410b011d726d51c3999)
Change-Id: Ic7cca64e14b2b2e812140c8d368279b615da074f
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105828
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
According to the datasheet[1], tps62360 is register compatible with tps62362.
tps62361B is register compatible with tps62363.
Thus this patch adds support for tps62362 and tps62363.
[1] http://www.ti.com/litv/pdf/slvsau9b
Change-Id: I62cdede0755d7decedeb7b1ef08e216a0dad3a12
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(Cherry-picked from mainline commit d1cf4f6)
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Change-Id: Ib9c4a63f06182c0ed2c1f27d9bf63342aa8474bc
Reviewed-on: http://git-master/r/105827
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
The client field of struct tps62360_chip is not used after converting to regmap.
The name field of struct tps62360_chip is not used in this driver.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from mainline commit c60f1718f508a40964c149f1139b4eaaae825fd3)
Change-Id: If7b0606b60bd887bc20ecbdaf5cafa6ccba8ff77
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105826
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
The variable 'selector' is a 'unsigned int', so it can never be less than zero.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
(cherry picked from commit 46783a046e13588f0459271ad6db9785fa8dcb8b)
Change-Id: I920b1628016b7d1c0b626497f24210c5c1f549ab
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/105825
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Fixing the UTMIP auto suspend issues.
Bug 992463
Bug 989400
Change-Id: Ia0d536cd66081b263f7f2bde5debcc600dcef22a
Signed-off-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-on: http://git-master/r/105692
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
Bug 986402
Change-Id: Id12540e31f8d7d9a04d764ed012310a685eafb8d
Signed-off-by: Tom Cherry <tcherry@nvidia.com>
Reviewed-on: http://git-master/r/104269
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|