summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-06-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "These are two fixes that came in this week, one for a regression we introduced in 3.10 in the GIC interrupt code, and the other one fixes a typo in newly introduced code" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
2013-06-22Merge tag 'driver-core-3.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg Kroah-Hartman: "Here's a single patch for the firmware core that resolves a reported oops in the firmware core that people have been hitting." * tag 'driver-core-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware loader: fix use-after-free by double abort
2013-06-22Merge tag 'usb-3.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are two USB patches for 3.10. One updates the Kconfig wording for CONFIG_USB_PHY to make it, hopefully, more obvious what this option is (I know you complained about this when it hit the tree.) The other is a new device id for a driver" * tag 'usb-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable usb: phy: Improve Kconfig help for CONFIG_USB_PHY
2013-06-22Merge tag 'tty-3.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pul tty fixes from Greg Kroah-Hartman: "Here are two tty core fixes that resolve some regressions that have been reported recently. Both tiny fixes, but needed" * tag 'tty-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix transient pty write() EIO tty/vt: Return EBUSY if deallocating VT1 and it is busy
2013-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Included is the recent tcm_qla2xxx residual underrun length fix from Roland, along with Joern's iscsi-target patch for session_lock breakage within iscsit_stop_time2retain_timer() code. Both are CC'ed to stable. The remaining two are specific to recent iscsi-target + iser conversion changes. One drops some left-over debug noise, and Andy's patch fixes configfs attribute handling during an explicit network portal feature bit disable when iser-target is unsupported." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Remove left over v3.10-rc debug printks target/iscsi: Fix op=disable + error handling cases in np_store_iser tcm_qla2xxx: Fix residual for underrun commands that fail target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()
2013-06-22Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Another set of fixes for Kernel 3.10. This series contain: - two Kbuild fixes for randconfig - a buffer overflow when using rtl28xuu with r820t tuner - one clk fixup on exynos4-is driver" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] Fix build when drivers are builtin and frontend modules [media] s5p makefiles: don't override other selections on obj-[ym] [media] exynos4-is: Fix FIMC-IS clocks initialization [media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner
2013-06-21Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm radeon fixes from Dave Airlie: "One core fix, but mostly radeon fixes for s/r and big endian UVD support, and a fix to stop the GPU being reset for no good reason, and crashing people's machines." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: update lockup tracking when scheduling in empty ring drm/prime: Honor requested file flags when exporting a buffer drm/radeon: fix UVD on big endian drm/radeon: fix write back suspend regression with uvd v2 drm/radeon: do not try to uselessly update virtual memory pagetable
2013-06-21Merge tag 'acpi-3.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: - Fix for a regression causing a failure to turn on some devices on some systems during initialization introduced by a recent revert of an ACPI PM change that broke something else. Fortunately, we know exactly what devices are affected, so we can add a fix just for them leaving everyone else alone. - ACPI power resources initialization fix preventing a NULL pointer from being dereferenced in the acpi_add_power_resource() error code path. - ACPI dock station driver fix that adds missing locking to write_undock(). - ACPI resources allocation fix changing the scope of an old workaround so that it doesn't affect systems that aren't actually buggy. This was reported a couple of days ago to fix DMA problems on some new platforms so we need it in -stable. From Mika Westerberg. * tag 'acpi-3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / LPSS: Power up LPSS devices during enumeration ACPI / PM: Fix error code path for power resources initialization ACPI / dock: Take ACPI scan lock in write_undock() ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
2013-06-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fix from Sage Weil: "This fixes a problem preventing the kernel and userland librbd libraries from sharing data with the new format 2 images" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use the correct length for format 2 object names
2013-06-20iscsi-target: Remove left over v3.10-rc debug printksNicholas Bellinger
Reported-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-20target/iscsi: Fix op=disable + error handling cases in np_store_iserAndy Grover
Writing 0 when iser was not previously enabled, so succeed but do nothing so that user-space code doesn't need a try: catch block when ib_isert logic is not available. Also, return actual error from add_network_portal using PTR_ERR during op=enable failure. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes One user visible fix to stop misreport GPU hangs and subsequent resets. * 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: update lockup tracking when scheduling in empty ring
2013-06-20drm/radeon: update lockup tracking when scheduling in empty ringJerome Glisse
There might be issue with lockup detection when scheduling on an empty ring that have been sitting idle for a while. Thus update the lockup tracking data when scheduling new work in an empty ring. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-20[media] Fix build when drivers are builtin and frontend modulesMauro Carvalho Chehab
There are a large number of reports that the media build is not compiling when some drivers are compiled as builtin, while the needed frontends are compiled as module. On the last one of such reports: From: kbuild test robot <fengguang.wu@intel.com> Subject: saa7134-dvb.c:undefined reference to `zl10039_attach' The .config file has: CONFIG_VIDEO_SAA7134=y CONFIG_VIDEO_SAA7134_DVB=y # CONFIG_MEDIA_ATTACH is not set CONFIG_DVB_ZL10039=m And it produces all those errors: drivers/built-in.o: In function `set_type': tuner-core.c:(.text+0x2f263e): undefined reference to `tea5767_attach' tuner-core.c:(.text+0x2f273e): undefined reference to `tda9887_attach' drivers/built-in.o: In function `tuner_probe': tuner-core.c:(.text+0x2f2d20): undefined reference to `tea5767_autodetection' drivers/built-in.o: In function `av7110_attach': av7110.c:(.text+0x330bda): undefined reference to `ves1x93_attach' av7110.c:(.text+0x330bf7): undefined reference to `stv0299_attach' av7110.c:(.text+0x330c63): undefined reference to `tda8083_attach' av7110.c:(.text+0x330d09): undefined reference to `ves1x93_attach' av7110.c:(.text+0x330d33): undefined reference to `tda8083_attach' av7110.c:(.text+0x330d5d): undefined reference to `stv0297_attach' av7110.c:(.text+0x330dbe): undefined reference to `stv0299_attach' drivers/built-in.o: In function `tuner_attach_dtt7520x': ngene-cards.c:(.text+0x3381cb): undefined reference to `dvb_pll_attach' drivers/built-in.o: In function `demod_attach_lg330x': ngene-cards.c:(.text+0x33828a): undefined reference to `lgdt330x_attach' drivers/built-in.o: In function `demod_attach_stv0900': ngene-cards.c:(.text+0x3383d5): undefined reference to `stv090x_attach' drivers/built-in.o: In function `cineS2_probe': ngene-cards.c:(.text+0x338b7f): undefined reference to `drxk_attach' drivers/built-in.o: In function `configure_tda827x_fe': saa7134-dvb.c:(.text+0x346ae7): undefined reference to `tda10046_attach' drivers/built-in.o: In function `dvb_init': saa7134-dvb.c:(.text+0x347283): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x3472cd): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x34731c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x34733c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x34735c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x347378): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x3473db): undefined reference to `tda10046_attach' drivers/built-in.o:saa7134-dvb.c:(.text+0x347502): more undefined references to `tda10046_attach' follow drivers/built-in.o: In function `dvb_init': saa7134-dvb.c:(.text+0x347812): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x347951): undefined reference to `mt312_attach' saa7134-dvb.c:(.text+0x3479a9): undefined reference to `mt312_attach' >> saa7134-dvb.c:(.text+0x3479c1): undefined reference to `zl10039_attach' This is happening because a builtin module can't use directly a symbol found on a module. By enabling CONFIG_MEDIA_ATTACH, the configuration becomes valid, as dvb_attach() macro loads the module if needed, making the symbol available to the builtin module. While this bug started to appear after the patches that use IS_DEFINED macro (like changeset 7b34be71db533f3e0cf93d53cf62d036cdb5418a), this bug is a way ancient than that. The thing is that, before the IS_DEFINED() patches, the logic used to be: && defined(MODULE)) struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, u8 i2c_addr, struct i2c_adapter *i2c); static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, u8 i2c_addr, struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } The above code, with the .config file used, was evoluting to FALSE (instead of TRUE as it should be, as CONFIG_DVB_ZL10039 is 'm'), and were adding the static inline code at saa7134-dvb, instead of the external call. So, while it weren't producing any compilation error, the code weren't working either. So, as the overhead for using CONFIG_MEDIA_ATTACH is minimal, just enable it, if MODULES is defined. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-20irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN caseShawn Guo
Commit c011470 (irqchip: gic: Perform the gic_secondary_init() call via CPU notifier) moves gic_secondary_init() that used to be called in .smp_secondary_init hook into a notifier call. But it changes the system behavior a little bit. Before the commit, gic_cpu_init() is called not only when kernel brings up the secondary cores but also when system resuming procedure hot-plugs the cores back to kernel. While after the commit, the function will not be called in the latter case, where the 'action' will not be CPU_STARTING but CPU_STARTING_FROZEN. This behavior difference at least causes the following suspend/resume regression on imx6q. $ echo mem > /sys/power/state PM: Syncing filesystems ... done. PM: Preparing system for mem sleep mmc1: card e624 removed Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep PM: suspend of devices complete after 5.930 msecs PM: suspend devices took 0.010 seconds PM: late suspend of devices complete after 0.343 msecs PM: noirq suspend of devices complete after 0.828 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=4294967169, c=4294967168, q=17) Task dump for CPU 1: swapper/1 R running 0 0 1 0x00000000 Backtrace: [<bf895ff4>] (0xbf895ff4) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <8007ccdc> Task dump for CPU 2: swapper/2 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <00000002> Task dump for CPU 3: swapper/3 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Fix the regression by checking 'action' being CPU_STARTING_FROZEN to have gic_cpu_init() called for secondary cores when system resumes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20[media] s5p makefiles: don't override other selections on obj-[ym]Mauro Carvalho Chehab
The $obj-m/$obj-y vars should be adding new modules to build, not overriding it. So, it should never use $obj-y := foo.o instead, it should use: $obj-y += foo.o Failing to do that is very bad, as it will suppress needed modules. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-19USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cableAnders Hammarquist
Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist <iko@iko.pp.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-20ACPI / LPSS: Power up LPSS devices during enumerationRafael J. Wysocki
Commit 7cd8407 (ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization) introduced a regression on some systems with Intel Lynxpoint Low-Power Subsystem (LPSS) where some devices need to be powered up during initialization, but their device objects in the ACPI namespace have _PS0 and _PS3 only (without _PSC or power resources). To work around this problem, make the ACPI LPSS driver power up devices it knows about by using a new helper function acpi_device_fix_up_power() that does all of the necessary sanity checks and calls acpi_dev_pm_explicit_set() to put the device into D0. Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-20ACPI / PM: Fix error code path for power resources initializationRafael J. Wysocki
Commit 781d737 (ACPI: Drop power resources driver) introduced a bug in the power resources initialization error code path causing a NULL pointer to be referenced in acpi_release_power_resource() if there's an error triggering a jump to the 'err' label in acpi_add_power_resource(). This happens because the list_node field of struct acpi_power_resource has not been initialized yet at this point and doing a list_del() on it is a bad idea. To prevent this problem from occuring, initialize the list_node field of struct acpi_power_resource upfront. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-06-19ACPI / dock: Take ACPI scan lock in write_undock()Rafael J. Wysocki
Since commit 3757b94 (ACPI / hotplug: Fix concurrency issues and memory leaks) acpi_bus_scan() and acpi_bus_trim() must always be called under acpi_scan_lock, but currently the following scenario violating that requirement is possible: write_undock() handle_eject_request() hotplug_dock_devices() dock_remove_acpi_device() acpi_bus_trim() Fix that by making write_undock() acquire acpi_scan_lock before calling handle_eject_request() as appropriate (begin_undock() is under the lock too in analogy with acpi_dock_deferred_cb()). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-06-19ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resourcesMika Westerberg
acpi_get_override_irq() was added because there was a problem with buggy BIOSes passing wrong IRQ() resource for the RTC IRQ. The commit that added the workaround was 61fd47e0c8476 (ACPI: fix two IRQ8 issues in IOAPIC mode). With ACPI 5 enumerated devices there are typically one or more extended IRQ resources per device (and these IRQs can be shared). However, the acpi_get_override_irq() workaround forces all IRQs in range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high as can be seen from the dmesg below: ACPI: IRQ 6 override to edge, high ACPI: IRQ 7 override to edge, high ACPI: IRQ 7 override to edge, high ACPI: IRQ 13 override to edge, high Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows the same thing: 7: 4 0 0 0 IO-APIC-edge INT33C2:00, INT33C3:00 The _CSR method for INT33C2 (and INT33C3) device returns following resource: Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, ) { 0x00000007, } which states that this is supposed to be level triggered, active low, shared IRQ instead. Fix this by making sure that acpi_get_override_irq() gets only called when we are dealing with legacy IRQ() or IRQNoFlags() descriptors. While we are there, correct pr_warning() to print the right triggering value. This change turns out to be necessary to make DMA work correctly on systems based on the Intel Lynxpoint PCH (Platform Controller Hub). [rjw: Changelog] Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-19[media] exynos4-is: Fix FIMC-IS clocks initializationSylwester Nawrocki
The ISP clock register content is not preserved over the ISP power domain off/on cycle. Instead of setting the clock frequencies once at probe time the clock rates set up is moved to the runtime_resume handler, which is invoked after the related power domain is already enabled, ensuring the clocks are properly configured when the device is actively used. This fixes the FIMC-IS malfunctions and STREAM ON timeout errors accuring on some boards: [ 59.860000] fimc_is_general_irq_handler:583 ISR_NDONE: 5: 0x800003e8, IS_ERROR_UNKNOWN [ 59.860000] fimc_is_general_irq_handler:586 IS_ERROR_TIME_OUT Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-19Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Alex writes: Remove some harmless but confusing VM related error messages fix a regression with suspend and UVD, fix UVD on big endian. * 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix UVD on big endian drm/radeon: fix write back suspend regression with uvd v2 drm/radeon: do not try to uselessly update virtual memory pagetable
2013-06-19drm/prime: Honor requested file flags when exporting a bufferLaurent Pinchart
The DRM PRIME API passes file flags to the driver for the exported buffer. Honor them instead of hardcoding 0600. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-18parisc: fix serial ports on C8000 workstationThomas Bogendoerfer
The C8000 workstation (64 bit kernel only) has a somewhat different serial port configuration than other models. Thomas Bogendoerfer sent a patch to fix this in September 2010, which was now minimally modified by me. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Helge Deller <deller@gmx.de>
2013-06-18firmware loader: fix use-after-free by double abortMing Lei
fw_priv->buf is accessed in both request_firmware_load() and writing to sysfs file of 'loading' context, but not protected by 'fw_lock' entirely. The patch makes sure that access on 'fw_priv->buf' is protected by the lock. So fixes the double abort problem reported by nirinA raseliarison: http://lkml.org/lkml/2013/6/14/188 Reported-and-tested-by: nirinA raseliarison <nirina.raseliarison@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: stable <stable@vger.kernel.org> # 3.9 Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18usb: phy: Improve Kconfig help for CONFIG_USB_PHYGeorge Spelvin
The previous text confused users by not describing the very common (e.g. x86 PC) sitations where no PHY driver is necessary. Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Series of fixes for 3.10. There are some usual driver fixes (mostly on s5p/exynos playform drivers), plus some fixes at V4L2 core" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (40 commits) [media] soc_camera: error dev remove and v4l2 call [media] sh_veu: fix the buffer size calculation [media] sh_veu: keep power supply until the m2m context is released [media] sh_veu: invoke v4l2_m2m_job_finish() even if a job has been aborted [media] v4l2-ioctl: don't print the clips list [media] v4l2-ctrls: V4L2_CTRL_CLASS_FM_RX controls are also valid radio controls [media] cx88: fix NULL pointer dereference [media] DocBook/media/v4l: update version number [media] exynos4-is: Remove "sysreg" clock handling [media] exynos4-is: Fix reported colorspace at FIMC-IS-ISP subdev [media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured [media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded [media] s5p-mfc: Add NULL check for allocated buffer [media] s5p-mfc: added missing end-of-lines in debug messages [media] s5p-mfc: v4l2 controls setup routine moved to initialization code [media] s5p-mfc: separate encoder parameters for h264 and mpeg4 [media] s5p-mfc: Remove special clock usage in driver [media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function [media] v4l2: mem2mem: save irq flags correctly [media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support ...
2013-06-18Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock framework fixes from Mike Turquette: "Half of the fixes here are for Exynos5, fixing regressions in CPUfreq due to the common clock framework conversion as well as one fix which allows the platform to properly reboot again. One core framework fix patches up a memory leak, another fixes a build error for the SPEAr platform and finally a Tegra-specific fix allows PCIe to initialize properly on that platform again" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: ARM: tegra30: clocks: Fix pciex clock registration clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock clk: spear: fix build error for spear3xx clk: samsung: Fix pll36xx_recalc_rate to handle kdiv properly clk: exynos5250: Add sclk_mpll to the parent list of mout_cpu clock clk: exynos5250: Update cpufreq related clocks for EXYNOS5250 clk: remove notifier from list before freeing it
2013-06-17tty: Fix transient pty write() EIOPeter Hurley
Commit 699390354da6c258b65bf8fa79cfd5feaede50b6 ('pty: Ignore slave pty close() if never successfully opened') introduced a bug with ptys whereby a write() in parallel with an open() on an existing pty could mistakenly indicate an I/O error. Only indicate an I/O error if the condition on open() actually exists. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Cc: stable <stable@vger.kernel.org> # 3.9 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17tty/vt: Return EBUSY if deallocating VT1 and it is busyRoss Lagerwall
Commit 421b40a6286e ("tty/vt: Fix vc_deallocate() lock order") changed the behavior when deallocating VT 1. Previously if trying to deallocate VT1 and it is busy, we would return EBUSY. The commit changed this to return 0 (success). This commit restores the old behavior. Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17[media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tunerGianluca Gennari
As suggested by Antti, this patch replaces: https://patchwork.kernel.org/patch/2649861/ The buffer overflow is fixed by reading only the r820t ID register. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-16ARM: tegra30: clocks: Fix pciex clock registrationJay Agarwal
Registering pciex as peripheral clock instead of fixed clock as tegra_perih_reset_assert(deassert) api of this clock api gives warning and ultimately does not succeed to assert(deassert) Signed-off-by: Jay Agarwal <jagarwal@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-16lseek(fd, n, SEEK_END) does *not* go to eof - nAl Viro
When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix RTNL locking in batman-adv, from Matthias Schiffer. 2) Don't allow non-passthrough macvlan devices to set NOPROMISC via netlink, otherwise we can end up with corrupted promisc counter values on the device. From Michael S Tsirkin. 3) Fix stmmac driver build with debugging defines enabled, from Dinh Nguyen. 4) Make sure name string we give in socket address in AF_PACKET is NULL terminated, from Daniel Borkmann. 5) Fix leaking of two uninitialized bytes of memory to userspace in l2tp, from Guillaume Nault. 6) Clear IPCB(skb) before tunneling otherwise we touch dangling IP options state and crash. From Saurabh Mohan. 7) Fix suspend/resume for davinci_mdio by using suspend_late and resume_early. From Mugunthan V N. 8) Don't tag ip_tunnel_init_net and ip_tunnel_delete_net with __net_{init,exit}, they can be called outside of those contexts. From Eric Dumazet. 9) Fix RX length error in sh_eth driver, from Yoshihiro Shimoda. 10) Fix missing sctp_outq initialization in some code paths of SCTP stack, from Neil Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) sctp: fully initialize sctp_outq in sctp_outq_init netiucv: Hold rtnl between name allocation and device registration. tulip: Properly check dma mapping result net: sh_eth: fix incorrect RX length error if R8A7740 ip_tunnel: remove __net_init/exit from exported functions drivers: net: davinci_mdio: restore mdio clk divider in mdio resume drivers: net: davinci_mdio: moving mdio resume earlier than cpsw ethernet driver net/ipv4: ip_vti clear skb cb before tunneling. tg3: Wait for boot code to finish after power on l2tp: Fix sendmsg() return value l2tp: Fix PPP header erasure and memory leak bonding: fix igmp_retrans type and two related races bonding: reset master mac on first enslave failure packet: packet_getname_spkt: make sure string is always 0-terminated net: ethernet: stmicro: stmmac: Fix compile error when STMMAC_XMIT_DEBUG used be2net: Fix 32-bit DMA Mask handling xen-netback: don't de-reference vif pointer after having called xenvif_put() macvlan: don't touch promisc without passthrough batman-adv: Don't handle address updates when bla is disabled batman-adv: forward late OGMs from best next hop ...
2013-06-14Merge tag 'char-misc-3.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc fixes from Greg Kroah-Hartman: "Here are some small mei driver fixes for 3.10-rc6 that fix some reported problems" * tag 'char-misc-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: clear interrupts on the resume path mei: nfc: fix nfc device freeing mei: init: Flush scheduled work before resetting the device
2013-06-14Merge tag 'usb-3.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are some small USB driver fixes that resolve some reported problems for 3.10-rc6 Nothing major, just 3 USB serial driver fixes, and two chipidea fixes" * tag 'usb-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: fix id change handling usb: chipidea: fix no transceiver case USB: pl2303: fix device initialisation at open USB: spcp8x5: fix device initialisation at open USB: f81232: fix device initialisation at open
2013-06-14drm/radeon: fix UVD on big endianAlex Deucher
This fixes the kernel side so that the ring should come up and ring and IB tests should work. The userspace UVD drivers will also need big endian fixes. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-14tcm_qla2xxx: Fix residual for underrun commands that failRoland Dreier
Suppose an initiator sends a DATA IN command with an allocation length shorter than the FC transfer length -- we get a target message like TARGET_CORE[qla2xxx]: Expected Transfer Length: 256 does not match SCSI CDB Length: 0 for SAM Opcode: 0x12 In that case, the target core adjusts the data_length and sets se_cmd->residual_count for the underrun. But now suppose that command fails and we end up in tcm_qla2xxx_queue_status() -- that function unconditionally overwrites residual_count with the already adjusted data_length, and the initiator will burp with a message like qla2xxx [0000:00:06.0]-301d:0: Dropped frame(s) detected (0x100 of 0x100 bytes). Fix this by adding on to the existing underflow residual count instead. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()Jörn Engel
Here is a fun one. Bug seems to have been introduced by commit 140854cb, almost two years ago. I have no idea why we only started seeing it now, but we did. Rough callgraph: core_tpg_set_initiator_node_queue_depth() `-> spin_lock_irqsave(&tpg->session_lock, flags); `-> lio_tpg_shutdown_session() `-> iscsit_stop_time2retain_timer() `-> spin_unlock_bh(&se_tpg->session_lock); `-> spin_lock_bh(&se_tpg->session_lock); `-> spin_unlock_irqrestore(&tpg->session_lock, flags); core_tpg_set_initiator_node_queue_depth() used to call spin_lock_bh(), but 140854cb changed that to spin_lock_irqsave(). However, lio_tpg_shutdown_session() still claims to be called with spin_lock_bh() held, as does iscsit_stop_time2retain_timer(): * Called with spin_lock_bh(&struct se_portal_group->session_lock) held Stale documentation is mostly annoying, but in this case the dropping the lock with the _bh variant is plain wrong. It is also wrong to drop locks two functions below the lock-holder, but I will ignore that bit for now. After some more locking and unlocking we eventually hit this backtrace: ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0xe8/0x100() Pid: 24645, comm: lio_helper.py Tainted: G O 3.6.11+ Call Trace: [<ffffffff8103e5ff>] warn_slowpath_common+0x7f/0xc0 [<ffffffffa040ae37>] ? iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [<ffffffff8103e65a>] warn_slowpath_null+0x1a/0x20 [<ffffffff810472f8>] local_bh_enable_ip+0xe8/0x100 [<ffffffff815b8365>] _raw_spin_unlock_bh+0x15/0x20 [<ffffffffa040ae37>] iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod] [<ffffffffa041149a>] iscsit_stop_session+0xfa/0x1c0 [iscsi_target_mod] [<ffffffffa0417fab>] lio_tpg_shutdown_session+0x7b/0x90 [iscsi_target_mod] [<ffffffffa033ede4>] core_tpg_set_initiator_node_queue_depth+0xe4/0x290 [target_core_mod] [<ffffffffa0409032>] iscsit_tpg_set_initiator_node_queue_depth+0x12/0x20 [iscsi_target_mod] [<ffffffffa0415c29>] lio_target_nacl_store_cmdsn_depth+0xa9/0x180 [iscsi_target_mod] [<ffffffffa0331b49>] target_fabric_nacl_base_attr_store+0x39/0x40 [target_core_mod] [<ffffffff811b857d>] configfs_write_file+0xbd/0x120 [<ffffffff81148f36>] vfs_write+0xc6/0x180 [<ffffffff81149251>] sys_write+0x51/0x90 [<ffffffff815c0969>] system_call_fastpath+0x16/0x1b ---[ end trace 3747632b9b164652 ]--- As a pure band-aid, this patch drops the _bh. Signed-off-by: Joern Engel <joern@logfs.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-13mei: me: clear interrupts on the resume pathTomas Winkler
We need to clear pending interrupts on the resume path. This brings the device into defined state before starting the reset flow This should solve suspend/resume issues: mei_me : wait hw ready failed. status = 0x0 mei_me : version message write failed Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13mei: nfc: fix nfc device freeingTomas Winkler
The nfc_dev is a static variable and is not cleaned properly upon reset mainly ndev->cl and ndev->cl_info are not set to NULL after freeing which mei_stop:198: mei_me 0000:00:16.0: stopping the device. [ 404.253427] general protection fault: 0000 [#2] SMP [ 404.253437] Modules linked in: mei_me(-) binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave fuse loop dm_mod hid_generic usbhid hid coretemp acpi_cpufreq mperf kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul snd_hda_codec_hdmi glue_helper aes_x86_64 e1000e snd_hda_intel snd_hda_codec ehci_pci iTCO_wdt iTCO_vendor_support ehci_hcd snd_hwdep xhci_hcd snd_pcm usbcore ptp mei sg microcode snd_timer pps_core i2c_i801 snd pcspkr battery rtc_cmos lpc_ich mfd_core soundcore usb_common snd_page_alloc ac ext3 jbd mbcache drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt i2c_core sd_mod crc_t10dif thermal fan video button processor thermal_sys hwmon ahci libahci libata scsi_mod [last unloaded: mei_me] [ 404.253591] CPU: 0 PID: 5551 Comm: modprobe Tainted: G D W 3.10.0-rc3 #1 [ 404.253611] task: ffff880143cd8300 ti: ffff880144a2a000 task.ti: ffff880144a2a000 [ 404.253619] RIP: 0010:[<ffffffff81334e5d>] [<ffffffff81334e5d>] device_del+0x1d/0x1d0 [ 404.253638] RSP: 0018:ffff880144a2bcf8 EFLAGS: 00010206 [ 404.253645] RAX: 2020302e30202030 RBX: ffff880144fdb000 RCX: 0000000000000086 [ 404.253652] RDX: 0000000000000001 RSI: 0000000000000086 RDI: ffff880144fdb000 [ 404.253659] RBP: ffff880144a2bd18 R08: 0000000000000651 R09: 0000000000000006 [ 404.253666] R10: 0000000000000651 R11: 0000000000000006 R12: ffff880144fdb000 [ 404.253673] R13: ffff880149371098 R14: ffff880144482c00 R15: ffffffffa04710e0 [ 404.253681] FS: 00007f251c59a700(0000) GS:ffff88014e200000(0000) knlGS:0000000000000000 [ 404.253689] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 404.253696] CR2: ffffffffff600400 CR3: 0000000145319000 CR4: 00000000001407f0 [ 404.253703] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 404.253710] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 404.253716] Stack: [ 404.253720] ffff880144fdb000 ffff880143ffe000 ffff880149371098 ffffffffa0471000 [ 404.253732] ffff880144a2bd38 ffffffff8133502d ffff88014e20cf48 ffff880143ffe1d8 [ 404.253744] ffff880144a2bd48 ffffffffa02a4749 ffff880144a2bd58 ffffffffa02a4ba1 [ 404.253755] Call Trace: [ 404.253766] [<ffffffff8133502d>] device_unregister+0x1d/0x60 [ 404.253787] [<ffffffffa02a4749>] mei_cl_remove_device+0x9/0x10 [mei] [ 404.253804] [<ffffffffa02a4ba1>] mei_nfc_host_exit+0x21/0x30 [mei] [ 404.253819] [<ffffffffa029c2dd>] mei_stop+0x3d/0x90 [mei] [ 404.253830] [<ffffffffa046e220>] mei_me_remove+0x60/0xe0 [mei_me] [ 404.253843] [<ffffffff81278f37>] pci_device_remove+0x37/0xb0 [ 404.253855] [<ffffffff81337c68>] __device_release_driver+0x98/0x100 [ 404.253865] [<ffffffff81337d80>] driver_detach+0xb0/0xc0 [ 404.253876] [<ffffffff81336b4f>] bus_remove_driver+0x8f/0x120 [ 404.253891] [<ffffffff81075990>] ? try_to_wake_up+0x2b0/0x2b0 [ 404.253903] [<ffffffff81338a48>] driver_unregister+0x58/0x90 [ 404.253913] [<ffffffff8127906b>] pci_unregister_driver+0x2b/0xb0 [ 404.253924] [<ffffffffa046f244>] mei_me_driver_exit+0x10/0xdcc [mei_me] [ 404.253936] [<ffffffff810a50d8>] SyS_delete_module+0x198/0x2b0 [ 404.253949] [<ffffffff814850d9>] ? do_page_fault+0x9/0x10 [ 404.253961] [<ffffffff81489692>] system_call_fastpath+0x16/0x1b [ 404.253967] Code: 41 5c 41 5d 41 5e 41 5f c9 c3 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc 53 48 8b 87 88 00 00 00 4c 8b 37 48 85 c0 74 18 <48> 8b 78 78 4c 89 e2 be 02 00 00 00 48 81 c7 f8 00 00 00 e8 3b [ 404.254048] RIP [<ffffffff81334e5d>] device_del+0x1d/0x1d0 Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13mei: init: Flush scheduled work before resetting the deviceSamuel Ortiz
Flushing pending work items before resetting the device makes more sense than doing so afterwards. Some of them, like e.g. the NFC initialization one, find themselves with client IDs changed after the reset, eventually leading to trigger a client.c:mei_me_cl_by_id() warning after a few modprobe/rmmod cycles. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13netiucv: Hold rtnl between name allocation and device registration.Benjamin Poirier
fixes a race condition between concurrent initializations of netiucv devices that try to use the same name. sysfs: cannot create duplicate filename '/devices/iucv/netiucv2' [...] Call Trace: ([<00000000002edea4>] sysfs_add_one+0xb0/0xdc) [<00000000002eecd4>] create_dir+0x80/0xfc [<00000000002eee38>] sysfs_create_dir+0xe8/0x118 [<00000000003835a8>] kobject_add_internal+0x120/0x2d0 [<00000000003839d6>] kobject_add+0x62/0x9c [<00000000003d9564>] device_add+0xcc/0x510 [<000003e00212c7b4>] netiucv_register_device+0xc0/0x1ec [netiucv] Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13tulip: Properly check dma mapping resultNeil Horman
Tulip throws an error when dma debugging is enabled, as it doesn't properly check dma mapping results with dma_mapping_error() durring tx ring refills. Easy fix, just add it in, and drop the frame if the mapping is bad Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Grant Grundler <grundler@parisc-linux.org> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull device tree bug fixes from Grant Likely: "This branch contains the following bug fixes: - Fix locking vs. interrupts. Bug caught by lockdep checks - Fix parsing of cpp #line directive output by dtc - Fix 'make clean' for dtc temporary files. There is also a commit that regenerates the dtc lexer and parser files with Bison 2.5. The only purpose of this commit is to separate the functional change in the dtc bug fix from the code generation change caused by a different Bison version" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: dtc: ensure #line directives don't consume data from the next line dtc: Update generated files to output from Bison 2.5 of: Fix locking vs. interrupts kbuild: make sure we clean up DTB temporary files
2013-06-13of: Fix locking vs. interruptsBenjamin Herrenschmidt
The OF code uses irqsafe locks everywhere except in a handful of functions for no obvious reasons. Since the conversion from the old rwlocks, this now triggers lockdep warnings when used at interrupt time. At least one driver (ibmvscsi) seems to be doing that from softirq context. This converts the few non-irqsafe locks into irqsafe ones, making them consistent with the rest of the code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-13Merge tag 'acpi-3.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "This is an alternative fix for the regression introduced in 3.9 whose previous fix had to be reverted right before 3.10-rc5, because it broke one of the Tony's machines. In this one the check is confined to the ACPI video driver (which is the only one causing the problem to happen in the first place) and the Tony's box shouldn't even notice it. - ACPI fix for an issue causing ACPI video driver to attempt to bind to devices it shouldn't touch from Rafael J Wysocki." * tag 'acpi-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Do not bind to device objects with a scan handler
2013-06-13Merge tag 'md-3.10-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md bugfixes from Neil Brown: "A few bugfixes for md Some tagged for -stable" * tag 'md-3.10-fixes' of git://neil.brown.name/md: md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place md/raid1,raid10: use freeze_array in place of raise_barrier in various places. md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. md: md_stop_writes() should always freeze recovery.
2013-06-13rbd: use the correct length for format 2 object namesJosh Durgin
Format 2 objects use 16 characters for the object name suffix to be able to express the full 64-bit range of object numbers. Format 1 images only use 12 characters for this. Using 12-character names for format 2 caused userspace and kernel rbd clients to read differently named objects, which made an image written by one client look empty to the other client. CC: stable@vger.kernel.org # 3.9+ Reported-by: Chris Dunlop <chris@onthe.net.au> Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>