summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-08-21Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: add GET_PARAM/INFO support for Z pipes drm/radeon/kms: add r100/r200 OQ support. drm: Fix sysfs device confusion. drm/radeon/kms: implement the bo busy ioctl properly.
2009-08-21drm/radeon: add GET_PARAM/INFO support for Z pipesAlex Deucher
Needed for occlusion queries on rv530 chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon/kms: add r100/r200 OQ support.Dave Airlie
This adds the relocation necessary for OQ support on the r100/r200 chipsets. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm: Fix sysfs device confusion.Thomas Hellstrom
The drm sysfs class suspend / resume methods could not distinguish between different device types wich could lead to illegal type casts. Use struct device_type and make sure the class suspend / resume callbacks are aware of those. There is no per device-type suspend / resume. Only new-style PM. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon/kms: implement the bo busy ioctl properly.Dave Airlie
The previous patch assumes the ioctl already existed, when it actually didn't. It also didn't return the correct error code. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-20Merge branch 'i2c-fixes-rc6' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-fixes-rc6' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-stu300: I2C STU300 stability updates i2c-omap: Enable workaround for Errata 1.153 based on i2c-omap: ACK pending [R/X]DR and [R/X]RDY interrupts i2c-omap: Fix I2C status ACK
2009-08-20i2c-stu300: I2C STU300 stability updatesLinus Walleij
- blk clk is enabled when an irq arrives. The clk should be enabled, but just to make sure. - All error bits are handled no matter state machine state - All irq's will run complete() except for irq's that wasn't an event. - No more looking into status registers just in case an interrupt has happend and the irq handle wasn't executed. - irq_disable/enable are now separete functions. - clk settings calculation changed to round upwards instead of downwards. - Number of address send attempts before giving up is increased to 12 from 10 since it most times take 8 tries before getting through. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: Enable workaround for Errata 1.153 based onMoiz Sonasath
Silicon Errata 1.153 has been fixed on OMAP 3630|4430 with the use of a later version of I2C IP block. The errata impacts OMAP 2420|2430|3430, enable the workaround for these based on I2C IP block revision number instead of OMAP CPU type Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: ACK pending [R/X]DR and [R/X]RDY interruptsMoiz Sonasath
ACK any pending read/write interrupts before exiting the ISR either after completing the operation [ARDY interrupt] or in case of an error [NACK|AL interrupt] Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: Fix I2C status ACKNishanth Menon
I2C status ack for [RX]RDR and [RX]RDY could cause race conditions of clearing the event twice and a violation of the programing sequence as defined in TRM This patch fixes the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-19Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/kms: teardown crtc correctly when fb is destroyed. drm/kms/radeon: cleanup combios TV table like DDX. drm/radeon/kms: memset the allocated framebuffer before using it. drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it. drm/radeon/kms: implement bo busy check + current domain drm/radeon/kms: cut down indirects in register accesses. drm/radeon/kms: Fix up vertical blank interrupt support. drm/radeon/kms: add rv530 R300_SU_REG_DEST + reloc for ZPASS_ADDR drm/edid: fixup detailed timings like the X server. drm/radeon/kms: Add specific rs690 authorized register table
2009-08-19drm/kms: teardown crtc correctly when fb is destroyed.Dave Airlie
If userspace destroys a framebuffer that is in use on a crtc, don't just null it out, tear down the crtc properly so the hw gets turned off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/kms/radeon: cleanup combios TV table like DDX.Dave Airlie
The fallback case wasn't getting executed properly if there was no TV table, which my T42 M7 hasn't got. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/radeon/kms: memset the allocated framebuffer before using it.Dave Airlie
This gets rid of some ugliness, we shuold probably find a way for the GPU to zero this. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it.Dave Airlie
LVDS always requests RMX_FULL, we need to fix it so that doesn't happen before we can enable LVDS on crtc 1. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-18spi_s3c24xx: fix transfer setup codeBen Dooks
Since the changes to the bitbang driver, there is the possibility we will be called with either the speed_hz or bpw values zero. We take these to mean that the default values (8 bits per word, or maximum bus speed). Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-18spi_s3c24xx: fix clock rate calculationBen Dooks
Currently the clock rate calculation may round as pleased, which means that it is possible that we will round down and end up with a faster clock rate than intended. Change the calculation to use DIV_ROUND_UP() to ensure that we end up with a clock rate either the same as or lower than the user requested one. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits) net: restore gnet_stats_basic to previous definition NETROM: Fix use of static buffer e1000e: fix use of pci_enable_pcie_error_reporting e1000e: WoL does not work on 82577/82578 with manageability enabled cnic: Fix locking in init/exit calls. cnic: Fix locking in start/stop calls. bnx2: Use mutex on slow path cnic calls. cnic: Refine registration with bnx2. cnic: Fix symbol_put_addr() panic on ia64. gre: Fix MTU calculation for bound GRE tunnels pegasus: Add new device ID. drivers/net: fixed drivers that support netpoll use ndo_start_xmit() via-velocity: Fix test of mii_status bit VELOCITY_DUPLEX_FULL rt2x00: fix memory corruption in rf cache, add a sanity check ixgbe: Fix receive on real device when VLANs are configured ixgbe: Do not return 0 in ixgbe_fcoe_ddp() upon FCP_RSP in DDP completion netxen: free napi resources during detach netxen: remove netxen workqueue ixgbe: fix issues setting rx-usecs with legacy interrupts can: fix oops caused by wrong rtnl newlink usage ...
2009-08-18Merge branch 'sh/for-2.6.31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: sh7724 ddr self-refresh changes sh: use in-soc KEYSC on se7724 sh: CMT suspend/resume sh: skip disabled LCDC channels
2009-08-18Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: Fix new incorrect error return from do_md_stop.
2009-08-18Fix new incorrect error return from do_md_stop.NeilBrown
Recent commit c8c00a6915a2e3d10416e8bdd3138429beb96210 changed the exit paths in do_md_stop and was not quite careful enough. There is one path were 'err' now needs to be cleared but it isn't. So setting an array to readonly (with mdadm --readonly) will work, but will incorrectly report and error: ENXIO. Signed-off-by: NeilBrown <neilb@suse.de>
2009-08-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (37 commits) ARM: 5673/1: U300 fix initsection compile warning ARM: Fix broken highmem support mx31moboard: invert sdhc ro signal sense ARM: S3C24XX: Fix clkout mpx error ARM: S3C64XX: serial: Fix a typo in Kconfig IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes OMAP3: RX51: Updated rx51_defconfig OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up OMAP3: RX51: Define TWL4030 USB transceiver in board file OMAP3: Overo: Fix smsc911x platform device resource value OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size OMAP2/3: DMA errata correction OMAP: Fix testing of cpu defines for mach-omap1 OMAP3: Overo: add missing pen-down GPIO definition OMAP: GPIO: clear/restore level/edge detect settings on mask/unmask OMAP3: PM: Fix wrong sequence in suspend. OMAP: PM: CPUfreq: obey min/max settings of policy OMAP2/3/4: UART: allow in-order port traversal OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial ports OMAP3: Fixed crash bug with serial + suspend ...
2009-08-17drm/radeon/kms: implement bo busy check + current domainDave Airlie
This implements the busy ioctl along with a current domain check. returns 0 or -EBUSY puts the current domain no matter what the answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-16dm-log-userspace: fix printk format warningRandy Dunlap
drivers/md/dm-log-userspace-transfer.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'size_t' Previously posted and acked, but apparently lost. http://lkml.indiana.edu/hypermail/linux/kernel/0906.2/02074.html Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: dm-devel@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-15e1000e: fix use of pci_enable_pcie_error_reportingXiaotian Feng
commit 111b9dc5 ("e1000e: add aer support") introduces pcie aer support for e1000e, but it is not reasonable to disable it in e1000_remove but enable it in e1000_resume. This patch enables aer support in e1000_probe. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15e1000e: WoL does not work on 82577/82578 with manageability enabledBruce Allan
With manageability (Intel AMT) enabled via BIOS, PHY wakeup does not get configured on newer parts which use PHY wakeup vs. MAC wakeup which causes WoL to not work. The driver should configure PHY wakeup whether or not manageability is enabled. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix locking in init/exit calls.Michael Chan
The slow path ulp_init and ulp_exit calls to the bnx2i driver are sleepable calls and therefore should not be protected using rcu_read_lock. Fix it by using mutex and refcount during these calls. cnic_unregister_driver() will now wait for the refcount to go to zero before completing the call. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix locking in start/stop calls.Michael Chan
The slow path ulp_start and ulp_stop calls to the bnx2i driver are sleepable calls and therefore should not be protected using rcu_read_lock. Fix it by using mutex and setting a bit during these calls. cnic_unregister_device() will now wait for the bit to clear before completing the call. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15bnx2: Use mutex on slow path cnic calls.Michael Chan
The slow path calls to the cnic driver are sleepable calls so we cannot use rcu_read_lock(). Use mutex for these slow path calls instead. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Refine registration with bnx2.Michael Chan
Register and unregister with bnx2 during NETDEV_UP and NETDEV_DOWN events. This simplifies the sequence of events and allows locking fixes in the next patch. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix symbol_put_addr() panic on ia64.Michael Chan
When the cnic driver tries to grab a symbol from bnx2 when bnx2 is running init code, symbol_get() will succeed but symbol_put_addr() will hit BUG() a moment later. module_text_address() fails because bnx2 is still in init code. This is fixed by using symbol_put() instead which does the exact opposite of symbol_get(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-16drm/radeon/kms: cut down indirects in register accesses.Dave Airlie
We really don't want to be doing all these indirects, updating the GPU gart table is something we do often so the less overhead the better. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-16drm/radeon/kms: Fix up vertical blank interrupt support.Michel Dänzer
Fixes 3D apps timing out in the WAIT_VBLANK ioctl. AVIVO bits compile-tested only. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-16drm/radeon/kms: add rv530 R300_SU_REG_DEST + reloc for ZPASS_ADDRDave Airlie
These are needed for Occulsion Query support. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-15sh: CMT suspend/resumeMagnus Damm
This patch updates the SuperH CMT driver with suspend and resume callbacks for the suspend-to-ram case. This patch stops the CMT channel at suspend time to avoid unwanted wake up events. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: skip disabled LCDC channelsMagnus Damm
This patch updates the SuperH Mobile LCDC driver to skip over disabled channels. Without this patch suspend-to-ram operation will crash if deferred io is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15drm/edid: fixup detailed timings like the X server.Dave Airlie
this syncs the versioning check with the code the X server uses. Reported-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-15drm/radeon/kms: Add specific rs690 authorized register tableJerome Glisse
rs690 is r3xx 3D engine with AVIVO modesetting so we need to allow AVIVO register for vline synchronization. This add a specific table to rs690 to handle that. Thanks to Marc (marvin24) for debugging this and kudos to Andre (taiu1) for spotting the origin of the bugs. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-14pegasus: Add new device ID.Petko Manolov
Add new definition to 'pegasus.h' for support Japanese IO DATA "ETX-US2" USB Ethernet Adapter. PEGASUS_DEV( $B!H(BIO DATA USB ETX-US2$B!I(B, VENDOR_IODATA, 0x092a, DEFAULT_GPIO_RESET | PEGASUS_II ) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14drivers/net: fixed drivers that support netpoll use ndo_start_xmit()Dongdong Deng
The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of spin_lock_irq() and spin_unlock_irq() in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use spin_lock_irqsave() and spin_unlock_restore() to prevent the irqs from getting enabled while in netpoll_send_skb(). Call trace: netpoll_send_skb() { -> local_irq_save(flags) ---> dev->ndo_start_xmit(skb, dev) ---> spin_lock_irq() ---> spin_unlock_irq() *******here would enable the interrupt. ... -> local_irq_restore(flags) } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14via-velocity: Fix test of mii_status bit VELOCITY_DUPLEX_FULLroel kluin
Test whether VELOCITY_DUPLEX_FULL bit is set in mii_status. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-08-14rt2x00: fix memory corruption in rf cache, add a sanity checkPavel Roskin
Change rt2x00_rf_read() and rt2x00_rf_write() to subtract 1 from the rf register number. This is needed because the rf registers are enumerated starting with one. The size of the rf register cache is just enough to hold all registers, so writing to the highest register was corrupting memory. Add a check to make sure that the rf register number is valid. Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@kernel.org Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-13ixgbe: Fix receive on real device when VLANs are configuredLucy Liu
Traffic received with a priority tag (VID = 0) and non-zero priority value was incorrectly handled by the VLAN packet code path due to a check on zero for the whole VLAN tag instead of just the VID. This patch masked out the priority field when checking the vlan tag for received VLAN packets. Signed-off-by: Lucy Liu <lucy.liu@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13ixgbe: Do not return 0 in ixgbe_fcoe_ddp() upon FCP_RSP in DDP completionYi Zou
We return the ddp->len in ixgbe_fcoe_ddp() to indicate the length of data that have been DDPed. However, it is possible that the length is 0, e.g., for SCSI READ, the FCP_RSP may come back w/ SCSI status 0x28 as Task Set Full with no FCP data for DDP. In ixgbe_fcoe_ddp(), we return 0 to indicate not passing DDPed packets to upper layer. Therefore in the case of ddp->len being 0 upon FCP_RSP, we do not want to return the 0 ddp->len as we want FCP_RSP to be always delivered to the upper layer. This patch fixes this bug by setting rc only if ddp->len is non-zero. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14ARM: S3C64XX: serial: Fix a typo in KconfigRamax Lo
The typo causes drivers/serial/s3c6400.c not being built for s3c6400 platform. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-13V4L/DVB (12441): siano: read buffer overflowRoel Kluin
With mode DEVICE_MODE_RAW_TUNER a read occurs past the end of smscore_fw_lkup[]. Subsequently an attempt is made to load the firmware from the resulting filename. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12440): Use kzalloc for frontend states to have struct dvb_frontend ↵Matthias Schwarzott
properly This patch changes most frontend drivers to allocate their state structure via kzalloc and not kmalloc. This is done to properly initialize the embedded "struct dvb_frontend frontend" field, that they all have. The visible effect of this struct being uninitalized is, that the member "id" that is used to set the name of kernel thread is totally random. Some board drivers (for example cx88-dvb) set this "id" via videobuf_dvb_alloc_frontend but most do not. So I at least get random id values for saa7134, flexcop and ttpci based cards. It looks like this in dmesg: DVB: registering adapter 1 frontend -10551321 (ST STV0299 DVB-S) The related kernel thread then also gets a strange name like "kdvb-ad-1-fe--1". Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Steven Toth <stoth@linuxtv.org> Cc: Timothy Lee <timothy.lee@siriushk.com> Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Acked-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12438): Read buffer overflowRoel Kluin
parport[n] is checked before n < MAX_CAMS Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12437): dvb: siano uses/depends on INPUTRandy Dunlap
siano uses input_*() functions so it should depend on INPUT to prevent build errors: ERROR: "input_event" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_free_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-31 03:16:38 +0000