summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-11-07Fix FAST_READ for QSPI nor flash support.Anthony Felice
This patch was submitted by Roshni Shah <roshni.shah@timesys.com> for ticket #52067
2013-07-29add support for spin locksEd Nash
2013-07-28fix debugfs worng directory for gate.Ed Nash
cleanup debug comment / code in i2c-imx
2013-07-27fix gate number constantEd Nash
2013-07-27add debugfs statistics and some code cleanupEd Nash
2013-07-26Support for setting TX clear-to-send in set modem CTRL in MVF Serial Driver3.0.15_vybrid-ts-2.63.0-vybrid-ts2.6roshni.shah
2013-07-26Fixed the uart_tasklet_action NULL pointer deference panic in MVF Serial Driverroshni.shah
2013-07-26MVF Serial Driver Improvements to fix the sysvinit console hang issue.roshni.shah
2013-07-26Removed dead code, corrected comments, print uart settings in MVF Serial Driverroshni.shah
2013-04-26Fix SDHC card timeout error.3.0-vybrid-ts2.3Anthony Felice
2013-04-26Add initial KGDB support.3.0-vybrid-ts2.2Anthony Felice
2013-04-26use dma bufeers rather than kmalloc buffers to make sure coherent ram ↵Ed Nash
between cpu and dcu. This showed up when painting a large bootlogo. holes would appear and then fill in as the boot progressed.
2013-03-14Fix serial bug when recieving a file3.0-vybrid-ts2Andy Voltz
When serial-transmit a file from host to target, an error "BUG: scheduling while atomic: cat/998/0x00010002" occurs. BUG: scheduling while atomic: cat/998/0x00010002 Modules linked in: Pid: 998, comm: cat CPU: 0 Not tainted (3.0.15 #1) PC is at n_tty_write+0x260/0x43c LR is at tty_write_room+0x20/0x2c pc : <80204700> lr : <80206194> psr: 60000013 sp : 863b9e78 ip : 8038e378 fp : 863b9ec4 r10: 00000fff r9 : 863b6400 r8 : 86165d80 r7 : 863b8000 r6 : 86368b6c r5 : 86368800 r4 : 00000002 r3 : 00000010 r2 : 00000000 r1 : 00000040 r0 : 00000002 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 863f8059 DAC: 00000015 <80031f5c> (show_regs+0x0/0x54) from <803761f0> (__schedule_bug+0x4c/0x60) r4:863b9e30 r3:60000193 <803761a4> (__schedule_bug+0x0/0x60) from <8037941c> (__schedule+0x35c/0x3c4) Thanks to Tadayoshi Arai <ara@lineo.co.jp> for reporting this and submitting this patch
2013-02-17extend timout for sema4 grab3.0-vybrid-ts1Ed Nash
2013-02-17add semaphore protection with MQX of I2C busEd Nash
2012-12-12fsl_nfc: Add default partitioningJustin Waters
Allows the NAND to properly probe if cmdline partitioning is not specified. Otherwise, it will fail silently.
2012-12-12Vybrid CAAM driverJason Jin
From Singh Pradip-B09147. Integrate by Jason Jin Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-12-12ENGR00181365-2: ADC: Add driver support for ADC VybridWang Xiaojun
Add driver support for ADC Vybrid. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-12-12ENGR00216081-2:Errata workaround for usb suspend and resumeJingchang Lu
Toggle PHYPWD.PWD after set PORTSC.SUSP with 8ms to trigger the LS_SE0/LS_EOP append flag after resume within UTM block. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-12-12ENGR00216081-1:Add USB host and gadget PM supportJingchang Lu
Handle usb suspend/resume, currently the BSP doesn't support usb plug/unplug wakeup. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-12-12ENGR00216087-1: ASRC support for VybridJingchang Lu
The ASRC driver supports stereo audio streams resample, the ASRCK1 serial clock using audio external clock source can not support 44.1K sample rate due to divider and prescaler restriction. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-12-12ENGR00216076-3: DSPI: Update DSPI driver for PMAlison Wang
Update power management part for DSPI driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-12-12ENGR00216076-2: DCU: Update DCU driver for PM and blending issueAlison Wang
Fix layers blending and reinitialization issue for DCU driver. Update power management part for DCU driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00216078-2: switch: add L2 switch driver for Vybrid3.0-mvf-201210121659Jason Jin
Port the L2 switch driver from CF platform for Vybridi plaform. This driver usually should work together with the RSTP demo applications provided by fsl. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-17ENGR00181358-3: fec: add second FEC support for VybridAlison Wang
Add second FEC support for Vybrid. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00212250-2: watchdog: Add watchdog driver support for VybridAlison Wang
Add watchdog driver support for Vybrid. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-10-17ENGR00181395-1: Add UART MISC functions support for FaradayJingchang Lu
Add hardware flow control support, Add transmit DMA support, Add FIFO operation support, Add MSB/LSB on data support, Add 9-bits MARK/SPACE support. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-10-17ENGR00181390-2: qspi: Add Quad SPI driver support for VybridAlison Wang
Add Quad SPI driver support for Vybrid. Signed-off-by: Alison Wang <b18965@freescale.com> Xiaochun Li <b41219@freescale.com>
2012-10-17ENGR00181407-3: Add Compaq touch screen interface for nano-xAlison Wang
Add Compaq touch screen interface for nano-x. Nano-x work with touch screen driver via Compaq touch screen event format, this patch could add the support above mouse device. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00181407-2: ts: add touch screen driver support for VybirdAlison Wang
Add touch screen driver support for Vybird. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00180953-2: dspi: update dspi driver support for VybridAlison Wang
Update dspi driver support for Vybrid after debugging on board. Signed-off-by: Jason Jin <jason.jin@freescale.com> Alison Wang <b18965@freescale.com>
2012-09-12ENGR00220352: Fix reboot hung after set uart baudrate3.0-mvf-201208141602Jingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12Enable the FEC as modulesJason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00212262-3: Faraday:Enable the ADMA2 function for SDHCJason Jin
This patch enable the ADMA2 function for the SDHC module used on Faraday board. Please note that the ADMA address should be 16 bytes aligned other than 4 byte in the spec. This patch also increased the SDHC module frequency to 200MHz. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00219771: Fix high-speed usb hub connection detection failure for FaradayJingchang Lu
Only disable the high-speed device disconnection detction for level-1 device, or the connection detecting would fail. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00219354: Fix USB host driver compiled as module fail problemJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00219787:Fix UART baud rate and console setting for MVF platformJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00220009: dcu: Add the option to enable or disable blanking supportAlison Wang
If framebuffer console support is enabled, blanking the screen will occur after a long time. To avoid it, the option for disabling blanking is added. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00219495: dcu: Fix module reinsert error for DCU driverAlison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00219342: edma: Updated edma driver and edma test driverXiaochun Li
This patch is to update Edma driver after debugging on board. mainly, fixed the bug that resulting the request source of DMA1 overflow Signed-off-by: Xiaochun Li <b41219@freescale.com>
2012-09-12ENGR219460:There is call trace when the SD card removed and then pluged-intoJason Jin
The call trace introduced by the card interrupt. This patch try to fix this by disabling the card interrupt. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00180936-3: add the module for test eDMA driverXiaochun Li
This patch is to tests eDMA driver. a simple memory to memory transfer with a 32 bit source and destination transfer size that generates an interrupt when the transfer is complete. Signed-off-by: Xiaochun Li <b41219@freescale.com>
2012-09-12ENGR00181396-2: high-speed USB device disconnection managementJingchang Lu
Detection of high-speed USB device disconnection should be enable on connection and disable on disconnection. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00180953-2: dspi: add dspi driver support for FaradayAlison Wang
Add dspi driver support for Faraday. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00180947-2: dcu: add dcu driver support for FaradayAlison Wang
Add dcu driver support for Faraday. The penguin logo could be shown correctly and the microwindows application was also tested. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00181374-2: nfc: add NFC driver support for FaradayAlison Wang
Add NFC driver support for Faraday. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00181363-2: add I2C controller support for FaradayAlison Wang
Add the I2C controller support for Faraday. Enable the I2C0 for Faraday. There are some different with I.MX for I2C controller, The i2c enable bit is invert with i.mx and the interrupt clear is w1c on Faraday but w0c on i.mx As there are more than one devices on the bus, the drive strength is set to 50ohm, otherwise, some device can not be found. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00180936-2: edma: add edma driver support for MVFAlison Wang
Add EDMA driver support for MVF. can use the "Always enable" model and DMA request sources from DMA1. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Xiaochun Li <b41219@freescale.com
2012-09-12ENGR00212262-2: esdhc: add esdhc controller support for MVFAlison Wang
Add esdhc controller support for MVF. The wp_pin for esdhc should be disabled. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00181358-2: fec: add FEC driver support for MVFAlison Wang
Add FEC driver support for MVF. Update the phyid for micrel ksz8041 phy. There are several version sz8041 with different phyid. Those id: 0x00221510, 0x00221512, 0x00221513 were found on different version SER board. So change the mask to 0x00fffff0 to fit the different version. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-27 02:58:49 +0000