summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-03-27[PATCH] Kconfig: VIDEO_DECODER must select FW_LOADERMichael Krufky
The cx25840 module requires external firmware in order to function, so it must select FW_LOADER, but saa7115 and saa7129 do not require it. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-27[PATCH] IB/srp: Don't send task management commands after target removalRoland Dreier
Just fail abort and reset requests that come in after we've already decided to remove a target. This fixes a nasty crash if a storage target goes away. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-01[PATCH] IB/mthca: max_inline_data handling tweaksJack Morgenstein
Fix a case where copying max_inline_data from a successful create_qp capabilities output to create_qp input could cause EINVAL error: mthca_set_qp_size must check max_inline_data directly against max_desc_sz; checking qp->sq.max_gs is wrong since max_inline_data depends on the qp type and does not involve max_sg. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] sbp2: fix another deadlock after disconnectionStefan Richter
sbp2: fix another deadlock after disconnection If there were commands enqueued but not completed before an SBP-2 unit was unplugged (or an attempt to reconnect failed), knodemgrd or any process which tried to remove the device would sleep uninterruptibly in blk_execute_rq(). Therefore make sure that all commands are completed when sbp2 retreats. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] sd: fix memory corruption with broken mode page headersStefan Richter
sd: fix memory corruption with broken mode page headers There's a problem in sd where we blindly believe the length of the headers and block descriptors. Some devices return insane values for these and cause our length to end up greater than the actual buffer size, so check to make sure. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Also removed the buffer size magic number (512) and added DPOFUA of zero to the defaults Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> rediff for 2.6.15.x without DPOFUA bit, taken from commit 489708007785389941a89fa06aedc5ec53303c96 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] skge: fix SMP raceStephen Hemminger
If skge is attached to a bad cable, that goes up/down. It exposes an SMP race with the management of IRQ mask Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] skge: genesis phy initialization fixStephen Hemminger
The SysKonnect Genesis based board would fail on initialization with phy_read errors caused by not waiting for last phy write. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] skge: fix NAPI/irq raceStephen Hemminger
Fix a race in the receive NAPI, irq handling. The interrupt clear and the start need to be separated. Otherwise there is a window between the last frame received and the NAPI done level handling. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] skge: speed settingStephen Hemminger
This is a clone of John Linville's fixed for speed setting on sky2 driver. The skge driver has the same code (and bug). It would not allow manually forcing 100 and 10 mbit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] gbefb: IP32 gbefb depth change fixKaj-Michael Lang
The gbefb driver does not update the framebuffer layers visual setting when depth is changed with fbset, resulting in strange colors (very dark blue in 16-bit, almost black in 24-bit). Signed-off-by: Kaj-Michael Lang <milang@tal.org> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] dm: free minor after unlink gendiskJun'ichi Nomura
Minor number should be freed after del_gendisk(). Otherwise, there could be a window where 2 registered gendisk has same minor number. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> [chrisw: backport to 2.6.15] Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] dm: missing bdput/thaw_bdev at removalJun'ichi Nomura
Need to unfreeze and release bdev otherwise the bdev inode with inconsistent state is reused later and cause problem. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> [chrisw: backport to 2.6.15] Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] gbefb: Set default of FB_GBE_MEM to 4 MBMartin Michlmayr
Allocating more than 4 MB memory for the GBE (SGI O2) framebuffer completely breakfs gbefb support at the moment. According to comments on #mipslinux, more than 4 MB has never worked correctly in Linux. Therefore, the default should be 4 MB. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] cfi: init wait queue in chip structSimon Vogl
Fix a kernel oops for Intel P30 flashes, where the wait queue head was not initialized for the flchip struct, which in turn caused a crash at the first read operation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-03-01[PATCH] hwmon it87: Probe i2c 0x2d onlyJean Delvare
Only scan I2C address 0x2d. This is the default address and no IT87xxF chip was ever seen on I2C at a different address. These chips are better accessed through their ISA interface anyway. This fixes bug #5889, although it doesn't address the whole class of problems. We'd need the ability to blacklist arbitrary I2C addresses on systems known to contain I2C devices which behave badly when probed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-01[PATCH] it87: Fix oops on removalJean Delvare
Fix an oops on it87 module removal when no supported hardware was found. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-02-09[PATCH] md: remove slashes from disk names when creation dev names in sysfsNeil Brown
e.g. The sx8 driver uses names like sx8/0. This would make a md component dev name like /sys/block/md0/md/dev-sx8/0 which is not allowed. So we change the '/' to '!' just like fs/partitions/check.c(register_disk) does. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] Fixed hardware RX checksum handlingHerbert Xu
When we pull the PPP protocol off the skb, we forgot to update the hardware RX checksum. This may lead to messages such as dsl0: hw csum failure. Similarly, we need to clear the hardware checksum flag when we use the existing packet to store the decompressed result. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] PCMCIA=m, HOSTAP_CS=y is not a legal configurationAdrian Bunk
CONFIG_PCMCIA=m, CONFIG_HOSTAP_CS=y doesn't compile. Reported by "Gabriel C." <crazy@pimpmylinux.org>. This patch was already included in 2.6.16-rc2. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] Input: iforce - fix detection of USB devicesDmitry Torokhov
Recent conversion to wait_event_interruptible_timeout() caused USB detection routine erroneously report timeouts for perfectly working devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] Input: iforce - do not return ENOMEM upon successful allocationAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] Input: sidewinder - fix an oopsZinx Verituse
Dynalloc conversion strikes again... Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] Input: db9 - fix possible crash with Saturn gamepadsDmitry Torokhov
Input: db9 - fix possible crash with Saturn gamepads Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] Input: grip - fix crash when accessing deviceDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] Input: mousedev - fix memory leakKimball Murray
Input: mousedev - fix memory leak Apparently, "while true; do cat </dev/null >/dev/input/mice; done" causes an OOM in a short amount of time. Funny that nobody noticed, it actually is very easy to trigger just by switching between VT1 and VT7... Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] dm-crypt: zero key before freeing itStefan Rompf
Zap the memory before freeing it so we don't leave crypto information around in memory. Signed-off-by: Stefan Rompf <stefan@loplof.de> Acked-by: Clemens Fruhwirth <clemens@endorphin.org> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-09[PATCH] SCSI: turn off ordered flush barriersJens Axboe
Turn off ordered flush barriers for SCSI driver, since the SCSI barrier code has a command leak. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-30[PATCH] Fix mkiss locking bugRalf Baechle DL5RB
ax_encaps() forgot to drop the bufferlock at the end of the function. Patch is already in 2.6.16-rc1. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-30[PATCH] Fix i2o_scsi oops on abortMarkus Lidel
>From http://bugzilla.kernel.org/show_bug.cgi?id=5923 When a scsi command failed, an oops would result. Back-to-back SMART queries would make the Seagate drives unhappy. The second SMART query would timeout, and the command would be aborted. From: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Kenny Simpson <theonetruekenny@yahoo.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-30[PATCH] Input: HID - fix an oops in PID initialization codeDmitry Torokhov
Input: HID - fix an oops in PID initialization code Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-30[PATCH] Kill blk_attempt_remerge()Jens Axboe
[BLOCK] Kill blk_attempt_remerge() It's a broken interface, it's done way too late. And apparently it triggers slab problems in recent kernels as well (most likely after the generic dispatch code was merged). So kill it, ide-cd is the only user of it. Signed-off-by: Jens Axboe <axboe@suse.de> chrisw: backport to 2.6.15 tree Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-14[PATCH] moxa serial: add proper capability checkAlan Cox
This requires the proper capabilities for the moxa bios update ioctl's. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-01-14[PATCH] vgacon: fix doublescan modeSamuel Thibault
When doublescan mode is in use, scanlines must be doubled. Thanks to Jason Dravet <dravet@hotmail.com> for reporting and testing. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-01-14[PATCH] Fix onboard video on SPARC Blade 100 for 2.6.{13,14,15}Luis F. Ortiz
I have recently been switching from using 2.4.32 on my trusty old Sparc Blade 100 to using 2.6.15 . Some of the problems I ran into were distorted video when the console was active (missing first character, skipped dots) and when running X windows (colored snow, stripes, missing pixels). A quick examination of the 2.6 versus 2.4 source for the ATY driver revealed alot of changes. A closer look at the code/data for the 64GR/XL chip revealed two minor "typos" that the rewriter(s) of the code made. The first is a incorrect clock value (230 .vs. 235) and the second is a missing flag (M64F_SDRAM_MAGIC_PLL). Making both these changes seems to have fixed my problem. I tend to think the 235 value is the correct one, as there is a 29.4 Mhz clock crystal close to the video chip and 235.2 (29.4*8) is too close to 235 to make it a coincidence. The flag for M64F_SDRAM_MAGIC_PLL was dropped during the changes made by adaplas in file revision 1.72 on the old bitkeeper repository. The change relating to the clock rate has been there forever, at least in the 2.6 tree. I'm not sure where to look for the old 2.5 tree or if anyone cares when it happened. On SPARC Blades 100's, which use the ATY MACH64GR video chipset, the clock crystal frequency is 235.2 Mhz, not 230 Mhz. The chipset also requires the use of M64F_SDRAM_MAGIC_PLL in order to setup the PLL properly for the DRAM. Signed-off-by: Luis F. Ortiz <lfo@Polyad.Org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2006-01-14[PATCH] skge: handle out of memory on ring changesStephen Hemminger
Please consider this for 2.6.15.1; it fixes several cases where the skge driver can get in a bad state and later crash; if an admin operation that causes a restart fails from out of memory. Such as changing the MTU or increasing the ring size. The fixes involve checking the return value and doing necessary unwinds. Or in some cases avoiding doing a full restart. The same code is the netdev-2.6 tree for 2.6.16 but as separate pieces Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-02[PATCH] powerpc: more g5 overtemp problem fixBenjamin Herrenschmidt
Some G5s still occasionally experience shutdowns due to overtemp conditions despite the recent fix. After analyzing logs from such machines, it appears that the overtemp code is a bit too quick at shutting the machine down when reaching the critical temperature (tmax + 8) and doesn't leave the fan enough time to actually cool it down. This happens if the temperature of a CPU suddenly rises too high in a very short period of time, or occasionally on boot (that is the CPUs are already overtemp by the time the driver loads). This patches makes the code a bit more relaxed, leaving a few seconds to the fans to do their job before kicking the machine shutown. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-31Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-12-30[PATCH] Input: wacom - fix X axis setupDenny Priebe
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-30[PATCH] Input: warrior - fix HAT0Y axis setupDmitry Torokhov
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-30[PATCH] Input: kbtab - fix Y axis setupDmitry Torokhov
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-30[ARM] 3216/1: indent and typo in drivers/serial/pxa.cErik Hovland
Patch from Erik Hovland This patch provides two changes. An indent is supplied for an if/else clause so that it is more readable. An acronym is incorrectly typed as UER when it should be IER. Signed-off-by: Erik Hovland <erik@hovland.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-29[PATCH] Simplify the VIDEO_SAA7134_OSS Kconfig dependency lineJean Delvare
Thanks to Roman Zippel for the suggestion. Signed-off-by: Jean Delvare <khali@linux-fr.org> [ Short explanation: Kconfig uses ternary math: n/m/y, and !m is m ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-29Revert radeon AGP aperture offset changesLinus Torvalds
This reverts the series of commits 67dbb4ea33731415fe09c62149a34f472719ac1d 281ab031a8c9e5b593142eb4ec59a87faae8676a 47807ce381acc34a7ffee2b42e35e96c0f322e52 that changed the GART VM start offset. It fixed some machines, but seems to continually interact badly with some X versions. Quoth Ben Herrenschmidt: "So I think at this point, the best is that we keep the old bogus code that at least is consistent with the bug in the server. I'm working on a big patch to X that reworks the memory map stuff completely and fixes those issues on the server side, I'll do a DRM patch matching this X fix as well so that the memory map is only ever set in one place and with what I hope is a correct algorithm..." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-29Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
2005-12-29Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-12-29[PATCH] Fix recursive config dependency for SAA7134Jean Delvare
Fix the cyclic dependency issue between CONFIG_SAA7134_ALSA and CONFIG_SAA7134_OSS (credits to Mauro Carvalho Chehab.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-29[PATCH] Input: aiptek - fix Y axis setupRiccardo Magliocchetti
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-29[PATCH] fix ia64 compile failure with gcc4.1Dave Jones
__get_unaligned creates a typeof the var its passed, and writes to it, which on gcc4.1, spits out the following error: drivers/char/vc_screen.c: In function 'vcs_write': drivers/char/vc_screen.c:422: error: assignment of read-only variable 'val' Signed-off-by: Dave Jones <davej@redhat.com> [ The "right" fix would be to try to fix <asm-generic/unaligned.h> but that's hard to do with the tools gcc gives us. So this simpler patch is preferable -- Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-28Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/tg3-2.6Linus Torvalds
2005-12-28[SERMOUSE]: Sun mice speak 5-byte protocol too.David S. Miller
Noticed by Christophe Zimmerman, this explains the slow mouse movement with 2.6.x kernels. And checking the 2.4.x drivers/sbus/char/sunmouse.c driver shows we always used a 5-byte protocol with Sun mice in the past. I have no idea how the 3-byte thing got into the 2.6.x driver, but it's surely wrong. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-13 17:14:00 +0000