summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-08-01nvmap: fix test condition to avoid infinite looptegra-l4t-r16-er-2014-08-01daily-2014.08.04.3_l4t/l4t-r16Bibek Basu
Make sure that we dont enter infinite loop due to negative value of pins in some cases. Also remove debugging check for refcount. Bug 1478467 Change-Id: I7df8efa5b3cf8927a0c18363add4f031aca48e48 Signed-off-by: Bibek Basu <bbasu@nvidia.com> Reviewed-on: http://git-master/r/450209 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2014-07-31media: tegra_v4l2_camera: use FRAME_START syncptBryan Wu
Also use nvhost_syncpt_incr_max_ext(). Bug 1478352 Change-Id: Ib868bd2bd7a070e4c410e48bd51977ac45b7d477 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/439471 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Bibek Basu <bbasu@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2014-07-31video: tegra: host: power module before accessBibek Basu
There could be race in refcount update leading to access of module registers without enabling the clock and power.This patch tries to catch such instances and enables power. Bug 1478467 Change-Id: Ia32da44bfcd7838e312815b6261ccadf4470a761 Signed-off-by: Bibek Basu <bbasu@nvidia.com> Reviewed-on: http://git-master/r/448701 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Venkat Moganty <vmoganty@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2014-07-31video: tegra: nvhost: validate nvmap_handle_refBibek Basu
nvhost_job_unpin should always get the nvmap_handle_ref from rb_entry after validating handle and presence in the tree. Bug 1478467 Change-Id: Ibf5f64a1a82fea8adbf7500bdb36b76357776448 Signed-off-by: Bibek Basu <bbasu@nvidia.com> Reviewed-on: http://git-master/r/436076 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Venkat Moganty <vmoganty@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2014-06-04media: video: fix clock settings for Tegra VI driverBryan Wu
- remove reduntant emc clock rate set which is controlled by DVFS - VI's maxim working clock freq is 300MHz - Change VI clock divider from an integer to a decimal, so the maxim VI clock on Cardhu should be 272MHz (PLL_P is 408MHz and divider is 1.5) Bug 1478352 Change-Id: I4028ed8531d92300d131befb53a4c9dc9f90930d Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/419071 Reviewed-by: Winnie Hsu <whsu@nvidia.com> Tested-by: Winnie Hsu <whsu@nvidia.com>
2014-06-04Added continuous mode capture supportAlex Feinman
Signed-off-by: Bryan Wu <pengw@nvidia.com> Change-Id: I67c50ff86b53a6c1001d2b688251dc55bd2eff55 Reviewed-on: http://git-master/r/419070 Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2014-05-28mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes.Al Cooper
The driver should not try to switch to 1.8V when the SD 3.0 host controller does not have any UHS capabilities bits set (SDR50, DDR50 or SDR104). See page 72 of "SD Specifications Part A2 SD Host Controller Simplified Specification Version 3.00" under "1.8V Signaling Enable". Instead of setting SDR12 and SDR25 in the host capabilities data structure for all V3.0 host controllers, only set them if SDR104, SDR50 or DDR50 is set in the host capabilities register. This will prevent the switch to 1.8V later. Bug 1402031 Acked-by: Arindam Nath <arindam.nath@amd.com> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Al Cooper <acooper@gmail.com> Signed-off-by: Jeetesh Burman <jburman@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org> Change-Id: I61d3fdb96fce223649075b6c063a3dd227aef062 Reviewed-on: http://git-master/r/365451 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2014-05-28mmc: sdhci: add quirk for lack of 1.8v supportJeetesh Burman
The OLPC XO-1.75 laptop includes a SDHCI controller which is 1.8v capable, and it truthfully reports so in its capabilities. This alternate voltage is used for driving new "UHS-I" SD cards at their full speed. However, what the controller doesn't know is that the motherboard physically doesn't have a 1.8v supply available. Add a quirk so that systems such as this one can override disable 1.8v support, adding support for UHS-I cards (by running them at 3.3v). This avoids a problem where the system would first try to run the card at 1.8v, fail, and then not be able to fully reset the card to retry at the normal 3.3v voltage. This is more appropriate than using the MISSING_CAPS quirk, which is intended for cases where the SDHCI controller is actually lying about its capabilities, and would force us to somehow override both caps words from another source. Bug 1402031 Change-Id: I7ca070a13241e6403eb2e243ebbc441a311110bc Signed-off-by: Daniel Drake <dsd@laptop.org> Reviewed-by: Philip Rakity <prakity@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jeetesh Burman <jburman@nvidia.com> Reviewed-on: http://git-master/r/346323 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2014-05-05tegra_wdt: support default watchdog apiJeetesh Burman
Reworked driver in order to properly support default watchdog api such as triggering by writing a character and disable by sending a magic character. Renamed ENABLE_ON_PROBE to ENABLE_HEARTBEAT which triggers the watchdog using the interrupt service routine. Original patch: http://git.toradex.com/gitweb/linux-toradex.git/commitdiff/5da592b805718b4f33897d642f577b1e6511bc2b Bug 1402031 Change-Id: I33ef556dac6d6717cadc00f8937437b925dc2ca3 Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Jeetesh Burman <jburman@nvidia.com> Reviewed-on: http://git-master/r/346477 Reviewed-by: Varun Wadekar <vwadekar@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2014-01-24media: nvmap: Allow access to videobuf2-dma-nvmapRahool Paliwal
Allow the "user" nvmap client to access the nvmap memory handle of "videobuf2-dma-nvmap" client. Bug 1421388 Change-Id: Id7a28c06214508d807098a6b258345023192a601 Signed-off-by: Rahool Paliwal <rpaliwal@nvidia.com> Reviewed-on: http://git-master/r/344620 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2014-01-24video: tegra: hdmi: validate variable screeninfopdabade
verify variable screeninfo by checking xres and yres before validating aspect ratio. bug 1417318 Change-Id: I473f3e2f30888c053ca53559e33355f216d2a8d3 Signed-off-by: Pankaj Dabade <pdabade@nvidia.com> Reviewed-on: http://git-master/r/340236 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Jong Kim <jongk@nvidia.com> Reviewed-by: Jon Mayo <jmayo@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2014-01-23video: tegra: fb: Update and synchronize dc windowpdabade
Update and synchronize DC window after enabling DC while unblanking. bug 1416339 Change-Id: I404004e1cbb3908cceade8aa033a660dc488d400 Signed-off-by: Pankaj Dabade <pdabade@nvidia.com> Reviewed-on: http://git-master/r/344778 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bibek Basu <bbasu@nvidia.com> Reviewed-by: Jong Kim <jongk@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2013-11-18media: ov5640: change 1080p resolution to 1088pBryan Wu
Setting the resolution to 1088p (as of now), since there are flickers observed for 1080p and also the encoder is not compatible with alignement of the RM surfaces of 1080p. 1088p is a stop-gap solution until the issues with 1080p are resolved. Bug 1369083 Change-Id: I3e73076451e7671d90603c6496ad14733591edeb Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/309543 Tested-by: Vikram Fugro <vfugro@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Kaustubh Purandare <kpurandare@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-11-18media: tegra_v4l2: add CSI pad calibrationBryan Wu
Bug 1369083 Change-Id: I1a81bcb62e8f6bb654ffbebba09661187ab4b512 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/309536 Tested-by: Vikram Fugro <vfugro@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Kaustubh Purandare <kpurandare@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-11-18media: nvmap: Few tweaks in nvmapVikram Fugro
The tweaks are only specific to r16-r2 branch and will not go into mainline. - Pass nvmap memory handle to the user through the mmap'd buffer allocated by videobuf2 client. - Allow the "user" nvmap client to access the nvmap memory handle of "videobuf2-dma-nvmap" client. Re-arranging the copyright message in nvmap_dev.c for Automatic validation to pass. Bug 1369083 Change-Id: Ia27d172253860e79557911c2e848bc9084d662d4 Signed-off-by: Vikram Fugro <vfugro@nvidia.com> Reviewed-on: http://git-master/r/309494 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Krishna Reddy <vdumpa@nvidia.com> Reviewed-by: Kaustubh Purandare <kpurandare@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-11-18Revert "media: camera config changes"Vikram Fugro
This reverts commit dd9a841da571a41d43f1eeaac1785b2adb1d80f3. The config changes (for V4L2) can be done manually as per need basis for V4L2, followed by compiling the kernel. Change-Id: I9174bce0f3da2974ab703b238dfb8fb3bbf607c5 Signed-off-by: Vikram Fugro <vfugro@nvidia.com> Reviewed-on: http://git-master/r/327607 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Kaustubh Purandare <kpurandare@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-30media: camera config changesVikram Fugro
- Disables TEGRA_CAMERA - Enables SOC_CAMERA and OV5640 sensor support Bug 1369083 Change-Id: I073c226e9f04a6f4f4699051f624a755dceb36cb Signed-off-by: Vikram Fugro <vfugro@nvidia.com> Reviewed-on: http://git-master/r/309491 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-16media: ov5640: update OV5640 sensor driverBryan Wu
Bug 1369083 Change-Id: I1522b688e0681e52592c0f26a8e335937372836a Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/279989 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-16media: tegra_v4l2: add dual camera supportBryan Wu
Add support for dual cameras from both CSI-A and CSI-B: - move all the CSI settings into video buffer struct - queue the video buffer struct to a dedicated queue - process one video buffer struct from the queue at one time Bug 1369083 Change-Id: Ie64d69282ab991b66e97327e288a2bacde088bd6 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/246269 (cherry picked from commit 228b0c2d9ae3fa1121f88836626d654ae0fc4ff0) Reviewed-on: http://git-master/r/279987 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-16media: tegra_v4l2: pass platform_data via soc_camera_linkBryan Wu
soc_camera_link supports passing power on/off control callback to soc_camera stack. So the power control can be handled by soc_camera stack instead of our Tegra V4L2 host driver. Also pass other platform_data fields via soc_camera_link instead of a hacking nvhost_device_data struct. Bug 1240806 Bug 1369083 Change-Id: I443a7d28196cc8292805da70d2d5ff1c3cd50a5d Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/246267 (cherry picked from commit 9083d270bf93b583cd5bf5151a52ea250f8541a3) Reviewed-on: http://git-master/r/279986 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-16media: tegra: use BGGR raw ouput formatBryan Wu
Bug 1369083 Change-Id: I43acb0d1dd6ca182291895d294a8458bfc99da05 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/279985 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Allen Martin <amartin@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-16media: videobuf2: fix buffer management issuesBryan Wu
Use right buffer flag NVMAP_HANDLE_WRITE_COMBINE to allocate buffer, which can be shared by VI/CSI and CPU. Don't use NVMAP_HEAP_SYSMEM. It is validated to old T20 silicon and can't support big buffers. By default, our nvmap_alloc() will use IOVMM to allocate buffers. nvmap_pin() gives us IOVA for hardware engines like VI/CSI module with IOMMU enabled in kernel. nvmap_mmap() gives us VA for CPU read/write operations. So we need to convert VA address to physical address of the buffer and map that buffer to user space processor's memory space "page by page". Bug 1369083 Change-Id: I4629eebe206c7640adf63551968fd89260dd0082 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/279984 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Allen Martin <amartin@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-16media: OV5650: tweak registers and add test modeBryan Wu
- tweak offset registers - add test mode to output color bars - use BGGR RAW format Bug 1369083 Change-Id: I61352c018f8ca099ff3d39158a67052a1e185eec Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/279983 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Allen Martin <amartin@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2013-08-19media: video: tegra: sh532u: fix out-of-bounds readDeepak Nibade
fix Coverity issue Coverity id : 13692 Bug 1046331 Bug 1049868 Change-Id: Iefa6d076d4622368534710630b89b9a15d166378 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: http://git-master/r/165864 (cherry picked from commit db33c3f3f2447a52a40f4fd001fec9a2932ee4c8) Reviewed-on: http://git-master/r/244637 Reviewed-by: Shreshtha Sahu <ssahu@nvidia.com> Tested-by: Shreshtha Sahu <ssahu@nvidia.com> Reviewed-by: Kiran Adduri <kadduri@nvidia.com> Reviewed-by: Erik Lilliebjerg <elilliebjerg@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2013-08-06Make firmware loading of R8169 optionalMursalin Akon
According to Realtek, the firmware provides power optimizations. The driver works without the firmware. Plus, there are scenarios where the firmware is not available, which makes the driver wait at request_firmware call (i.e., 60 sec wait). Bug 1236060 Bug 991551 Change-Id: Ifcaa4b2dd48c4111ded33cf2bade7dc1f6422821 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/258353 GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-03-05media: tegra: add supporting for RAW8/RAW10 input and outputBryan Wu
CSI host controller of Tegra can support Bayer Raw8 and Raw 10 data input, it also output data as extended 16-bit data format in memory directly. Raw data output should be handled by the second output channel. This patch add supporting for Raw data input/output and the second output channel. All were tested on Cardhu board. Change-Id: Ifd1d8c94671a1d4571dcf176774e2d3cffafc399 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/200225 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-03-05media: soc_camera: tegra: fix one building warningBryan Wu
Change-Id: Ie685ad11a0847be5b51c752ec593aec857e2f0e2 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/200224 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-03-05media: soc_camera: add OV5650 SoC camera I2C device driverBryan Wu
OV5650 is a RAW sensor outputing Bayer RAW 8 or RAW 10 data. This driver uses SoC camera interface and supports several different resolution. Change-Id: I8075b63b42f7949a264bdef446f5ed8bdc0a9eee Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/200223 GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-03-05tegra: When using V4L2, don't use vi client.Andrew Chew
The VI client within drivers/video/tegra is mutually exclusive with the Tegra V4L2 framework, since they both want to own the camera hardware. Change-Id: Idebd0f619f5fc7eb6323b2e08c29c9692c8887a0 Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/200221 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-03-05tegra: Make tegra_vi01_device accessibleAndrew Chew
Make it accessible outside of drivers/video/tegra. V4L2 driver needs to set some platform_data. Add suport for T20. Change-Id: I98353c2874ea28cfa0a7a5dd8a1dc4c586af4dd7 Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/200220 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-01-31staging: iio: light: isl29028: appropriately set interrupt flagPreetham Chandru R
set is_int_enable to true only if we register for a irq. Bug 1211260 Change-Id: I603efe721796db70d504da7999e5d7939d45d13a Signed-off-by: Preetham Chandru R <pchandru@nvidia.com> Reviewed-on: http://git-master/r/193047 (cherry picked from commit 8b89b2b64c67d80fcfc29cd4f6a92d4527e70df9) Reviewed-on: http://git-master/r/195844 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Winnie Hsu <whsu@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-01-14usb: gadget: tegra:change condition for vbus checkRakesh Bodla
Changing the condition for vbus check. VBUS will be present when OTG cable is connected, hence vbus status will be reflected wrong. Correct status is tracked through vbus_active variable. Bug 1158853 Bug 1214802 Change-Id: Ic904beb5919ddafef5becf39ddac1767cdda79cd Signed-off-by: Rakesh Bodla <rbodla@nvidia.com> Reviewed-on: http://git-master/r/145148 (cherry picked from commit 00777683b05af76f15daa0152fb014183a32fa28) Reviewed-on: http://git-master/r/190673 Reviewed-by: Automatic_Commit_Validation_User Tested-by: Preetham Chandru <pchandru@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2013-01-14media: v4l2: tegra: fixing memory access oops in tegra camera driverBryan Wu
Function pointer int (*queue_setup)() of struct vb2_ops in include/media/videobuf2-core.h is not compatible with our function call tegra_camera_videobuf_setup(). So building will generate warning and it will cause alloc_ctxs[] with wrong value, then introduce memory access oops later. Bug 1215617 Change-Id: I5d49ccd611a9435a5ee3b21e344bc0b5464ba747 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/190036 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2013-01-14video: tegra: dc: minimum window size is 1x1Jon Mayo
Use 1x1 as the minimum window size. Bug 1193195 Change-Id: I42e13fec82bbc2dc37bde6416088f3ae49b304b7 Signed-off-by: Jon Mayo <jmayo@nvidia.com> Reviewed-on: http://git-master/r/173302 (cherry picked from commit 3f160560b48fdf501547b9fc1f7c5bf8bd5e32af) Reviewed-on: http://git-master/r/190810 Reviewed-by: Eric Brower <ebrower@nvidia.com> Tested-by: Eric Brower <ebrower@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-01-11driver: bcm4329: initialize SSID variable properlyMursalin Akon
initialize SSID variable properly to ensure no memory overrun. Bug 1204024 Change-Id: I2485c13edcf6a0feeae3cd4b2e9e98910a771dd2 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/190684 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit
2013-01-11media: videobuf2-dma-nvmap: fixing nvmap_alloc failureBryan Wu
Videobuf2-dma-nvmap driver using by Tegra v4l2 camera driver needs to allocation memory from system memory with nvmap_alloc(). If we don't enable config option CONFIG_NVMAP_ALLOW_SYSMEM, nvmap_alloc() will fail and application stops working. Bug 1215629 Change-Id: I40af697d8aee1a4981a9684953107dd070cc9bea Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/190037 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2013-01-09driver: bcmdhd: do not allow hang thread after cleanupMursalin Akon
do not allow scheduling hang thread after cleanup is done. Bug 1210849 Bug 1205910 Bug 1163014 Change-Id: Idc5f9fd6a3d210843f1168e57ceef107599d5789 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/189721 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Reviewed-by: Allen Martin <amartin@nvidia.com>
2013-01-07usb: otg: tegra: Do not free platform data twicePreetham Chandru R
when platform device is unregistered, the call to platform_device_release() will kfree the platform data. Hence do not free the platform data again. Bug 1209618 Change-Id: Ied67f550223ec199da4bc8e38a12e7ee94c2d98a Signed-off-by: Preetham Chandru R <pchandru@nvidia.com> Reviewed-on: http://git-master/r/187806 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Kiran Adduri <kadduri@nvidia.com> Reviewed-by: Rakesh Bodla <rbodla@nvidia.com> Reviewed-by: Venkat Moganty <vmoganty@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-01-04arm: tegra: sata: Fix LP0 resume problemYen Lin
- Fix a bug in ahci-tegra.c when checking if SATA is on when resuming - Add codes to support PM315 which uses LDO1 regulator for SATA rails bug 1206518 Change-Id: Iaa910b1948fbcf5e45491977fd8ed0b313d2e0ae Signed-off-by: Yen Lin <yelin@nvidia.com> Reviewed-on: http://git-master/r/188441 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bibek Basu <bbasu@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Allen Martin <amartin@nvidia.com> Reviewed-by: Peng Wu <pengw@nvidia.com> Tested-by: Peng Wu <pengw@nvidia.com> Reviewed-by: Eric Brower <ebrower@nvidia.com>
2012-12-21arm: tegra: fb: Fix merge errorShashank Sharma
Fix manual rebase error Change-Id: I3b2165488b11bddda271cecdc979341c130def9b Signed-off-by: Shashank Sharma <shashanks@nvidia.com> Reviewed-on: http://git-master/r/173554 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-12-20arm: tegra: fb: Set new mode to all vc'sShashank Sharma
Send change all vc's notification from HDMI hot-plug reader to fbcon, so that the new selected mode can be applied on all the vc's from vc1 to vc6. This sometimes causes corruption on HDMI hot plugin, when fbcon is mapped to HDMI Bug 1166008 Signed-off-by: Shashank Sharma <shashanks@nvidia.com> Change-Id: Id173de3014597f79c8c8b31bbbee7c9c560547b6 Reviewed-on: http://git-master/r/168683 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2012-12-20arm: tegra: dc: corrct order to enable/disable dc irqJong Kim
When porting change from mainline to balance dc irq, the change of enable/disable order was not ported, thus dc irq is disabled if dc is enabled during probe. This is part of http://git-master/r/146107. Original change is big for many bugs, only port one here. bug 1173177 bug 1173038 bug 1008313 Change-Id: Idd703daca9f980e905b185eeeae19dc6309d76e5 Signed-off-by: Dongfang Shi <dshi@nvidia.com> Reviewed-on: http://git-master/r/162868 (cherry picked from commit 6ddd8b02f7a17d2269290d06159c20860ffb92e9) Signed-off-by: Jong Kim <jongk@nvidia.com> Reviewed-on: http://git-master/r/173249 Reviewed-by: Winnie Hsu <whsu@nvidia.com> Reviewed-by: Jon Mayo <jmayo@nvidia.com>
2012-12-20arm: tegra: fb: Update line_length using display widthJong Kim
Unconditionally update line_length using disply width to avoid discrepancy between line_length and actual display width. bug 1186388 Change-Id: I8ef2f9cf76a61764c2121f3c2c013b72b830ce2e Signed-off-by: Jong Kim <jongk@nvidia.com> Reviewed-on: http://git-master/r/170664 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-12-17media: ov5640: Add Omnivision OV5640 supportAndrew Chew
Based on ov5642 driver. There seem to be some register differences, so forking the driver to make those changes. Change-Id: Idb4a79757cbbcd15d5456ce82a708f433faaff7a Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/169836 Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-12-17media: tegra: enable a clock for VIP in APB MISC registerBryan Wu
Change-Id: Ic4d91f4ed70fc3daf52768118f6ea537d529a5a8 Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/169835 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-12-17tegra: Add nvmap_mark_global()Andrew Chew
Add this function, to be able to set the global field of an nvmap_handle while preserving the nvmap API's encapsulation mechanisms. Change-Id: I62de773a65119722f059b114e2d0e906c7e04e83 Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/169834 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-12-17tegra: Add function to release resourcesAndrew Chew
Add a companion function to nvhost_client_device_get_resources() called nvhost_client_device_put_resources() that does the opposite thing. This is useful for any nvhost clients that need to be loaded as modules, since the driver removal path will be exercised in that case. Change-Id: Ib5cec6fce7b05c780b135b03fcd88e068f772244 Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> Reviewed-on: http://git-master/r/169833 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-12-17media: tegra: Tegra videobuf2Andrew Chew
This is based off of videobuf2-dma-contig, except we use Tegra's nvmap for the buffer allocations. Signed-off-by: Andrew Chew <achew@nvidia.com> Change-Id: I15e689c33ee7b4fc0aade794c78701c82483df3f Reviewed-on: http://git-master/r/145345 (cherry picked from commit 70a4f20fbdd6c2c719400d6c59ef58d845657031) Signed-off-by: Bryan Wu <pengw@nvidia.com> Change-Id: Ia0632d7fcb28415e33fbb22c48f29117d7436f1d Reviewed-on: http://git-master/r/170824 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Andrew Chew <achew@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-12-17media: tegra: Tegra V4L2 cameraAndrew Chew
This is the Tegra V4L2 camera host driver, for Tegra2/Tegra3's VI/CSI controller. Signed-off-by: Andrew Chew <achew@nvidia.com> Change-Id: If2d9eefe53c2119c1a6ae518216e1a3c3ed216ef Reviewed-on: http://git-master/r/145346 (cherry picked from commit 5a9bfd588b755f354ae21471a3a2a3e559ca6fae) Signed-off-by: Bryan Wu <pengw@nvidia.com> Change-Id: I4db33b17efdb401938603cb2153d73bf3421ba61 Reviewed-on: http://git-master/r/170823 Reviewed-by: Andrew Chew <achew@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-12-14media: video: tegra: nvavp: Fix nvmap handle issueGajanan Bhat
In open call we were assigning the driver's nvmap handle to the nvavp's client context which would get released in release call to driver. This will cause driver's nvmap handle to be invalid if a parallel client context is running and driver does any nvmap operation. Bug 1013063 Bug 1192772 Change-Id: Id02520ae8ec511bb8c50bc4d3908ea3e75e1ea6b Reviewed-on: http://git-master/r/170585 Signed-off-by: Gajanan Bhat <gbhat@nvidia.com> Reviewed-on: http://git-master/r/171097 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 16:58:21 +0000