summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-11-05drm/nouveau: silence modesetting spam on pre-gf8 chipsetsBen Skeggs
commit cee59f15a60cc6269a25e3f6fbf1a577d6ab8115 upstream. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-05x86: Remove the ancient and deprecated disable_hlt() and enable_hlt() facilityLen Brown
commit f6365201d8a21fb347260f89d6e9b3e718d63c70 upstream. The X86_32-only disable_hlt/enable_hlt mechanism was used by the 32-bit floppy driver. Its effect was to replace the use of the HLT instruction inside default_idle() with cpu_relax() - essentially it turned off the use of HLT. This workaround was commented in the code as: "disable hlt during certain critical i/o operations" "This halt magic was a workaround for ancient floppy DMA wreckage. It should be safe to remove." H. Peter Anvin additionally adds: "To the best of my knowledge, no-hlt only existed because of flaky power distributions on 386/486 systems which were sold to run DOS. Since DOS did no power management of any kind, including HLT, the power draw was fairly uniform; when exposed to the much hhigher noise levels you got when Linux used HLT caused some of these systems to fail. They were by far in the minority even back then." Alan Cox further says: "Also for the Cyrix 5510 which tended to go castors up if a HLT occurred during a DMA cycle and on a few other boxes HLT during DMA tended to go astray. Do we care ? I doubt it. The 5510 was pretty obscure, the 5520 fixed it, the 5530 is probably the oldest still in any kind of use." So, let's finally drop this. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephen Hemminger <shemminger@vyatta.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-3rhk9bzf0x9rljkv488tloib@git.kernel.org [ If anyone cares then alternative instruction patching could be used to replace HLT with a one-byte NOP instruction. Much simpler. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-05floppy: do put_disk on current dr if blk_init_queue failsHerton Ronaldo Krzesinski
commit 238ab78469c6ab7845b43d5061cd3c92331b2452 upstream. If blk_init_queue fails, we do not call put_disk on the current dr (dr is decremented first in the error handling loop). Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13Sjoerd Simons
commit 9756fe38d10b2bf90c81dc4d2f17d5632e135364 upstream. This box claims to have an LVDS interface but doesn't actually have one. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31staging: comedi: amplc_pc236: fix invalid register access during detachIan Abbott
commit aaeb61a97b7159ebe30b18a422d04eeabfa8790b upstream. `pc236_detach()` is called by the comedi core if it attempted to attach a device and failed. `pc236_detach()` calls `pc236_intr_disable()` if the comedi device private data pointer (`devpriv`) is non-null. This test is insufficient as `pc236_intr_disable()` accesses hardware registers and the attach routine may have failed before it has saved their I/O base addresses. Fix it by checking `dev->iobase` is non-zero before calling `pc236_intr_disable()` as that means the I/O base addresses have been saved and the hardware registers can be accessed. It also implies the comedi device private data pointer is valid, so there is no need to check it. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31cpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible codeAndreas Herrmann
commit e4df1cbcc1f329e53a1fff7450b2229e0addff20 upstream. Commit 6889125b8b4e09c5e53e6ecab3433bed1ce198c9 (cpufreq/powernow-k8: workqueue user shouldn't migrate the kworker to another CPU) causes powernow-k8 to trigger a preempt warning, e.g.: BUG: using smp_processor_id() in preemptible [00000000] code: cpufreq/3776 caller is powernowk8_target+0x20/0x49 Pid: 3776, comm: cpufreq Not tainted 3.6.0 #9 Call Trace: [<ffffffff8125b447>] debug_smp_processor_id+0xc7/0xe0 [<ffffffff814877e7>] powernowk8_target+0x20/0x49 [<ffffffff81482b02>] __cpufreq_driver_target+0x82/0x8a [<ffffffff81484fc6>] cpufreq_governor_performance+0x4e/0x54 [<ffffffff81482c50>] __cpufreq_governor+0x8c/0xc9 [<ffffffff81482e6f>] __cpufreq_set_policy+0x1a9/0x21e [<ffffffff814839af>] store_scaling_governor+0x16f/0x19b [<ffffffff81484f16>] ? cpufreq_update_policy+0x124/0x124 [<ffffffff8162b4a5>] ? _raw_spin_unlock_irqrestore+0x2c/0x49 [<ffffffff81483640>] store+0x60/0x88 [<ffffffff811708c0>] sysfs_write_file+0xf4/0x130 [<ffffffff8111243b>] vfs_write+0xb5/0x151 [<ffffffff811126e0>] sys_write+0x4a/0x71 [<ffffffff816319a9>] system_call_fastpath+0x16/0x1b Fix this by by always using work_on_cpu(). Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31bcma: fix unregistration of coresPiotr Haber
commit 1fffa905adffbf0d3767fc978ef09afb830275eb upstream. When cores are unregistered, entries need to be removed from cores list in a safe manner. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31vhost: fix mergeable bufs on BE hostsMichael S. Tsirkin
commit 910a578f7e9400a78a3b13aba0b4d2df16a2cb05 upstream. We copy head count to a 16 bit field, this works by chance on LE but on BE guest gets 0. Fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Alexander Graf <agraf@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31xhci: Fix potential NULL ptr deref in command cancellation.Sarah Sharp
commit 43a09f7fb01fa1e091416a2aa49b6c666458c1ee upstream. The command cancellation code doesn't check whether find_trb_seg() couldn't find the segment that contains the TRB to be canceled. This could cause a NULL pointer deference later in the function when next_trb is called. It's unlikely to happen unless something is wrong with the command ring pointers, so add some debugging in case it happens. This patch should be backported to stable kernels as old as 3.0, that contain the commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d "xHCI: handle command after aborting the command ring". Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: mos7840: remove invalid disconnect handlingJohan Hovold
commit e681b66f2e19fadbe8a7e2a17900978cb6bc921f upstream. Remove private zombie flag used to signal disconnect and to prevent control urb from being submitted from interrupt urb completion handler. The control urb will not be re-submitted as both the control urb and the interrupt urb is killed on disconnect. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: mos7840: remove NULL-urb submissionJohan Hovold
commit 28c3ae9a8cf45f439c9a0779ebd0256e2ae72813 upstream. The private int_urb is never allocated so the submission from the control completion handler will always fail. Remove this odd piece of broken code. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: mos7840: fix port-device leak in error pathJohan Hovold
commit 3eb55cc4ed88eee3b5230f66abcdbd2a91639eda upstream. The driver set the usb-serial port pointers to NULL on errors in attach, effectively preventing usb-serial core from decrementing the port ref counters and releasing the port devices and associated data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: mos7840: fix urb leak at releaseJohan Hovold
commit 65a4cdbb170e4ec1a7fa0e94936d47e24a17b0e8 upstream. Make sure control urb is freed at release. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: sierra: fix memory leak in probe error pathJohan Hovold
commit 084817d79399ab5ccab2f90a148b0369912a8369 upstream. Move interface data allocation to attach so that it is deallocated on errors in usb-serial probe. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: sierra: fix memory leak in attach error pathJohan Hovold
commit 7e41f9bcdd2e813ea2a3c40db291d87ea06b559f upstream. Make sure port private data is deallocated on errors in attach. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: serial: Fix memory leak in sierra_release()Lennart Sorensen
commit f7bc5051667b74c3861f79eed98c60d5c3b883f7 upstream. I found a memory leak in sierra_release() (well sierra_probe() I guess) that looses 8 bytes each time the driver releases a device. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: opticon: fix memory leak in error pathJohan Hovold
commit acbf0e5263de563e25f7c104868e4490b9e72b13 upstream. Fix memory leak in write error path. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: opticon: fix DMA from stackJohan Hovold
commit ea0dbebffe118724cd4df7d9b071ea8ee48d48f0 upstream. Make sure to allocate the control-message buffer dynamically as some platforms cannot do DMA from stack. Note that only the first byte of the old buffer was used. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: whiteheat: fix memory leak in error pathJohan Hovold
commit c129197c99550d356cf5f69b046994dd53cd1b9d upstream. Make sure command buffer is deallocated in case of errors during attach. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: <support@connecttech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31usb hub: send clear_tt_buffer_complete events when canceling TT clear workOctavian Purdila
commit 3b6054da68f9b0d5ed6a7ed0f42a79e61904352c upstream. There is a race condition in the USB hub code with regard to handling TT clear requests that can get the HCD driver in a deadlock. Usually when an TT clear request is scheduled it will be executed immediately: <7>[ 6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 6.078299] hub_tt_work:731 <7>[ 9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us] <7>[ 9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule <7>[ 9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us] <7>[ 9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us] <7>[ 10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 10.116537] hub_tt_work:731 However, if a suspend operation is triggered before hub_tt_work is scheduled, hub_quiesce will cancel the work without notifying the HCD driver: <3>[ 35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80 <5>[ 35.034022] sd 0:0:0:0: [sda] Stopping disk <7>[ 35.034039] hub 2-1:1.0: hub_suspend <7>[ 35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us] <7>[ 35.035085] hub 1-0:1.0: hub_suspend <7>[ 35.035102] usb usb1: bus suspend, wakeup 0 <7>[ 35.035106] ehci_hcd 0000:00:1a.0: suspend root hub <7>[ 35.035298] hub 2-0:1.0: hub_suspend <7>[ 35.035313] usb usb2: bus suspend, wakeup 0 <7>[ 35.035315] ehci_hcd 0000:00:1d.0: suspend root hub <6>[ 35.250017] PM: suspend of devices complete after 216.979 msecs <6>[ 35.250822] PM: late suspend of devices complete after 0.799 msecs <7>[ 35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1 <7>[ 35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot <7>[ 35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1 <7>[ 35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot <6>[ 35.274254] PM: noirq suspend of devices complete after 23.442 msecs <6>[ 35.274975] ACPI: Preparing to enter system sleep state S3 <6>[ 35.292666] PM: Saving platform NVS memory <7>[ 35.295030] Disabling non-boot CPUs ... <6>[ 35.297351] CPU 1 is now offline <6>[ 35.300345] CPU 2 is now offline <6>[ 35.303929] CPU 3 is now offline <7>[ 35.303931] lockdep: fixing up alternatives. <6>[ 35.304825] Extended CMOS year: 2000 When the device will resume the EHCI driver will get stuck in ehci_endpoint_disable waiting for the tt_clearing flag to reset: <0>[ 47.610967] usb 2-1.3: **** DPM device timeout **** <7>[ 47.610972] f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0 <7>[ 47.610983] 15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30 <7>[ 47.610993] c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001 <7>[ 47.611004] Call Trace: <7>[ 47.611006] [<c10624a5>] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611019] [<c10787f8>] ? lock_release_holdtime.part.22+0x88/0xf0 <7>[ 47.611026] [<c103ed46>] ? lock_timer_base.isra.35+0x26/0x50 <7>[ 47.611034] [<c17592d3>] ? schedule_timeout+0x133/0x290 <7>[ 47.611044] [<c175b43e>] schedule+0x1e/0x50 <7>[ 47.611051] [<c17592d8>] schedule_timeout+0x138/0x290 <7>[ 47.611057] [<c10624a5>] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611063] [<c103e560>] ? usleep_range+0x40/0x40 <7>[ 47.611070] [<c1759445>] schedule_timeout_uninterruptible+0x15/0x20 <7>[ 47.611077] [<c14935f4>] ehci_endpoint_disable+0x64/0x160 <7>[ 47.611084] [<c147d1ee>] ? usb_hcd_flush_endpoint+0x10e/0x1d0 <7>[ 47.611092] [<c1165663>] ? sysfs_add_file+0x13/0x20 <7>[ 47.611100] [<c147d5a9>] usb_hcd_disable_endpoint+0x29/0x40 <7>[ 47.611107] [<c147fafc>] usb_disable_endpoint+0x5c/0x80 <7>[ 47.611111] [<c147fb57>] usb_disable_interface+0x37/0x50 <7>[ 47.611116] [<c1477650>] usb_reset_and_verify_device+0x4b0/0x640 <7>[ 47.611122] [<c1474665>] ? hub_port_status+0xb5/0x100 <7>[ 47.611129] [<c147a975>] usb_port_resume+0xd5/0x220 <7>[ 47.611136] [<c148877f>] generic_resume+0xf/0x30 <7>[ 47.611142] [<c14821a3>] usb_resume+0x133/0x180 <7>[ 47.611147] [<c1473b10>] ? usb_dev_thaw+0x10/0x10 <7>[ 47.611152] [<c1473b1d>] usb_dev_resume+0xd/0x10 <7>[ 47.611157] [<c13baa60>] dpm_run_callback+0x40/0xb0 <7>[ 47.611164] [<c13bdb03>] ? pm_runtime_enable+0x43/0x70 <7>[ 47.611171] [<c13bafc6>] device_resume+0x1a6/0x2c0 <7>[ 47.611177] [<c13ba940>] ? dpm_show_time+0xe0/0xe0 <7>[ 47.611183] [<c13bb0f9>] async_resume+0x19/0x40 <7>[ 47.611189] [<c10580c4>] async_run_entry_fn+0x64/0x160 <7>[ 47.611196] [<c104a244>] ? process_one_work+0x104/0x480 <7>[ 47.611203] [<c104a24c>] ? process_one_work+0x10c/0x480 <7>[ 47.611209] [<c104a2c0>] process_one_work+0x180/0x480 <7>[ 47.611215] [<c104a244>] ? process_one_work+0x104/0x480 <7>[ 47.611220] [<c1058060>] ? async_schedule+0x10/0x10 <7>[ 47.611226] [<c104c15c>] worker_thread+0x11c/0x2f0 <7>[ 47.611233] [<c104c040>] ? manage_workers.isra.27+0x1f0/0x1f0 <7>[ 47.611239] [<c10507f8>] kthread+0x78/0x80 <7>[ 47.611244] [<c1750000>] ? timer_cpu_notify+0xd6/0x20d <7>[ 47.611253] [<c1050780>] ? __init_kthread_worker+0x60/0x60 <7>[ 47.611258] [<c176357e>] kernel_thread_helper+0x6/0xd <7>[ 47.611283] ------------[ cut here ]------------ This patch changes hub_quiesce behavior to flush the TT clear work instead of canceling it, to make sure that no TT clear request remains uncompleted before suspend. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31usb-storage: add unusual_devs entry for Casio EX-N1 digital cameraMichael Shigorin
commit d7870af7e2e3a91b462075ec1ca669b482215187 upstream. This commit sets removable subclass for Casio EX-N1 digital camera. The patch has been tested within an ALT Linux kernel: http://git.altlinux.org/people/led/packages/?p=kernel-image-3.0.git;a=commitdiff;h=c0fd891836e89fe0c93a4d536a59216d90e4e3e7 See also https://bugzilla.kernel.org/show_bug.cgi?id=49221 Signed-off-by: Oleksandr Chumachenko <ledest@gmail.com> Signed-off-by: Michael Shigorin <mike@osdn.org.ua> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31ehci: Add yet-another Lucid nohandoff pci quirkAnisse Astier
commit 8daf8b6086f9d575200cd0aa3797e26137255609 upstream. Board name changed on another shipping Lucid tablet. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versionsAnisse Astier
commit c323dc023b9501e5d09582ec7efd1d40a9001d99 upstream. BIOS vendors keep changing the BIOS versions. Only match the beginning of the string to match all Lucid tablets with board name M11JB. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31drivers/rtc/rtc-imxdi.c: add missing spin lock initializationJan Luebbe
commit fee0de7791f967c2c5f0d43eb7b7261761b45e64 upstream. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Roland Stigge <stigge@antcom.de> Cc: Grant Likely <grant.likely@secretlab.ca> Tested-by: Roland Stigge <stigge@antcom.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28xHCI: handle command after aborting the command ringElric Fu
commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d upstream. According to xHCI spec section 4.6.1.1 and section 4.6.1.2, after aborting a command on the command ring, xHC will generate a command completion event with its completion code set to Command Ring Stopped at least. If a command is currently executing at the time of aborting a command, xHC also generate a command completion event with its completion code set to Command Abort. When the command ring is stopped, software may remove, add, or rearrage Command Descriptors. To cancel a command, software will initialize a command descriptor for the cancel command, and add it into a cancel_cmd_list of xhci. When the command ring is stopped, software will find the command trbs described by command descriptors in cancel_cmd_list and modify it to No Op command. If software can't find the matched trbs, we can think it had been finished. This patch should be backported to kernels as old as 3.0, that contain the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to check for virt_dev=0 bug." That commit papers over a NULL pointer dereference, and this patch fixes the underlying issue that caused the NULL pointer dereference. Note from Sarah: The TRB_TYPE_LINK_LE32 macro is not in the 3.0 stable kernel, so I added it to this patch. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28xHCI: cancel command after command timeoutElric Fu
commit 6e4468b9a0793dfb53eb80d9fe52c739b13b27fd upstream. The patch is used to cancel command when the command isn't acknowledged and a timeout occurs. This patch should be backported to kernels as old as 3.0, that contain the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to check for virt_dev=0 bug." That commit papers over a NULL pointer dereference, and this patch fixes the underlying issue that caused the NULL pointer dereference. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28xHCI: add aborting command ring functionElric Fu
commit b92cc66c047ff7cf587b318fe377061a353c120f upstream. Software have to abort command ring and cancel command when a command is failed or hang. Otherwise, the command ring will hang up and can't handle the others. An example of a command that may hang is the Address Device Command, because waiting for a SET_ADDRESS request to be acknowledged by a USB device is outside of the xHC's ability to control. To cancel a command, software will initialize a command descriptor for the cancel command, and add it into a cancel_cmd_list of xhci. Sarah: Fixed missing newline on "Have the command ring been stopped?" debugging statement. This patch should be backported to kernels as old as 3.0, that contain the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to check for virt_dev=0 bug." That commit papers over a NULL pointer dereference, and this patch fixes the underlying issue that caused the NULL pointer dereference. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28xHCI: add cmd_ring_stateElric Fu
commit c181bc5b5d5c79b71203cd10cef97f802fb6f9c1 upstream. Adding cmd_ring_state for command ring. It helps to verify the current command ring state for controlling the command ring operations. This patch should be backported to kernels as old as 3.0. The commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to check for virt_dev=0 bug." papers over the NULL pointer dereference that I now believe is related to a timed out Set Address command. This (and the four patches that follow it) contain the real fix that also allows VIA USB 3.0 hubs to consistently re-enumerate during the plug/unplug stress tests. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28skge: Add DMA mask quirk for Marvell 88E8001 on ASUS P5NSLI motherboardGraham Gower
[ Upstream commit a2af139ff1cd85df586690ff626619ab1ee88b0a ] Marvell 88E8001 on an ASUS P5NSLI motherboard is unable to send/receive packets on a system with >4gb ram unless a 32bit DMA mask is used. This issue has been around for years and a fix was sent 3.5 years ago, but there was some debate as to whether it should instead be fixed as a PCI quirk. http://www.spinics.net/lists/netdev/msg88670.html However, 18 months later a similar workaround was introduced for another chipset exhibiting the same problem. http://www.spinics.net/lists/netdev/msg142287.html Signed-off-by: Graham Gower <graham.gower@gmail.com> Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28drm/i915: apply timing generator bug workaround on CPT and PPTJesse Barnes
commit 3bcf603f6d5d18bd9d076dc280de71f48add4101 upstream. On CougarPoint and PantherPoint PCH chips, the timing generator may fail to start after DP training completes. This is due to a bug in the FDI autotraining detect logic (which will stall the timing generator and re-enable it once training completes), so disable it to avoid silent DP mode setting failures. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
2012-10-28media: au0828: fix case where STREAMOFF being called on stopped stream ↵Devin Heitmueller
causes BUG() commit a595c1ce4c9d572cf53513570b9f1a263d7867f2 upstream. We weren't checking whether the resource was in use before calling res_free(), so applications which called STREAMOFF on a v4l2 device that wasn't already streaming would cause a BUG() to be hit (MythTV). Reported-by: Larry Finger <larry.finger@lwfinger.net> Reported-by: Jay Harbeston <jharbestonus@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-28amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]Andrew Morton
commit 168bfeef7bba3f9784f7540b053e4ac72b769ce9 upstream. If none of the elements in scrubrates[] matches, this loop will cause __amd64_set_scrub_rate() to incorrectly use the n+1th element. As the function is designed to use the final scrubrates[] element in the case of no match, we can fix this bug by simply terminating the array search at the n-1th element. Boris: this code is fragile anyway, see here why: http://marc.info/?l=linux-kernel&m=135102834131236&w=2 It will be rewritten more robustly soonish. Reported-by: Denis Kirjanov <kirjanov@gmail.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28USB: option: add more ZTE devicesBjørn Mork
commit 4b35f1c52943851b310afb09047bfe991ac8f5ae upstream. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28USB: option: blacklist net interface on ZTE devicesBjørn Mork
commit 1452df6f1b7e396d89c2a1fdbdc0e0e839f97671 upstream. Based on information from the ZTE Windows drivers. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28usb: acm: fix the computation of the number of data bitsNicolas Boullis
commit 301a29da6e891e7eb95c843af0ecdbe86d01f723 upstream. The current code assumes that CSIZE is 0000060, which appears to be wrong on some arches (such as powerpc). Signed-off-by: Nicolas Boullis <nboullis@debian.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28USB: cdc-acm: fix pipe type of write endpointMing Lei
commit c5211187f7ff8e8dbff4ebf7c011ac4c0ffe319c upstream. If the write endpoint is interrupt type, usb_sndintpipe() should be passed to usb_fill_int_urb() instead of usb_sndbulkpipe(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28pcmcia: sharpsl: don't discard sharpsl_pcmcia_opsArnd Bergmann
commit fdc858a466b738d35d3492bc7cf77b1dac98bf7c upstream. The sharpsl_pcmcia_ops structure gets passed into sa11xx_drv_pcmcia_probe, where it gets accessed at run-time, unlike all other pcmcia drivers that pass their structures into platform_device_add_data, which makes a copy. This means the gcc warning is valid and the structure must not be marked as __initdata. Without this patch, building collie_defconfig results in: drivers/pcmcia/pxa2xx_sharpsl.c:22:31: fatal error: mach-pxa/hardware.h: No such file or directory compilation terminated. make[3]: *** [drivers/pcmcia/pxa2xx_sharpsl.o] Error 1 make[2]: *** [drivers/pcmcia] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Pavel Machek <pavel@suse.cz> Cc: linux-pcmcia@lists.infradead.org Cc: Jochen Friedrich <jochen@scram.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21tpm: Propagate error from tpm_transmit to fix a timeout hangPeter Huewe
commit abce9ac292e13da367bbd22c1f7669f988d931ac upstream. tpm_write calls tpm_transmit without checking the return value and assigns the return value unconditionally to chip->pending_data, even if it's an error value. This causes three bugs. So if we write to /dev/tpm0 with a tpm_param_size bigger than TPM_BUFSIZE=0x1000 (e.g. 0x100a) and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a) tpm_transmit returns -E2BIG which is assigned to chip->pending_data as -7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully been written to the TPM, altough this is not true (bug #1). As we did write more than than TPM_BUFSIZE bytes but tpm_write reports that only TPM_BUFSIZE bytes have been written the vfs tries to write the remaining bytes (in this case 10 bytes) to the tpm device driver via tpm_write which then blocks at /* cannot perform a write until the read has cleared either via tpm_read or a user_read_timer timeout */ while (atomic_read(&chip->data_pending) != 0) msleep(TPM_TIMEOUT); for 60 seconds, since data_pending is -7 and nobody is able to read it (since tpm_read luckily checks if data_pending is greater than 0) (#bug 2). After that the remaining bytes are written to the TPM which are interpreted by the tpm as a normal command. (bug #3) So if the last bytes of the command stream happen to be a e.g. tpm_force_clear this gets accidentally sent to the TPM. This patch fixes all three bugs, by propagating the error code of tpm_write and returning -E2BIG if the input buffer is too big, since the response from the tpm for a truncated value is bogus anyway. Moreover it returns -EBUSY to userspace if there is a response ready to be read. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().Egbert Eich
commit 082918471139b07964967cfe5f70230909c82ae1 upstream. radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[] to destroy each of them. radeon_ext_tmds_enc_destroy() however also has code to destroy it's associated I2C bus rec which has been obtained by radeon_i2c_lookup() and is therefore also in the i2c_bus[] list. This causes a double free resulting in a kernel panic when unloading the radeon driver. Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this problem. agd5f: fix compiler warning Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21Add CDC-ACM support for the CX93010-2x UCMxx USB ModemJean-Christian de Rivaz
commit e7d491a19d3e3aac544070293891a2542ae0c565 upstream. This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572 and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized. Reference: http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5 See idVendor and idProduct in table 6-1. Device Descriptors Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21tg3: Apply short DMA frag workaround to 5906Matt Carlson
commit b7abee6ef888117f92db370620ebf116a38e3f4d upstream. 5906 devices also need the short DMA fragment workaround. This patch makes the necessary change. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Mike Pagano <mpagano@gentoo.org>
2012-10-21viafb: don't touch clock state on OLPC XO-1.5Daniel Drake
commit 012a1211845eab69a5488d59eb87d24cc518c627 upstream. As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5 instability," enabling or disabling the IGA1/IGA2 clocks causes occasional stability problems during suspend/resume cycles on this platform. This is rather odd, as the documentation suggests that clocks have two states (on/off) and the default (stable) configuration is configured to enable the clock only when it is needed. However, explicitly enabling *or* disabling the clock triggers this system instability, suggesting that there is a 3rd state at play here. Leaving the clock enable/disable registers alone solves this problem. This fixes spurious reboots during suspend/resume behaviour introduced by commit b692a63a. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21video/udlfb: fix line counting in fb_writeAlexander Holler
commit b8c4321f3d194469007f5f5f2b34ec278c264a04 upstream. Line 0 and 1 were both written to line 0 (on the display) and all subsequent lines had an offset of -1. The result was that the last line on the display was never overwritten by writes to /dev/fbN. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)Stefan Richter
commit 790198f74c9d1b46b6a89504361b1a844670d050 upstream. Fix two bugs of the /dev/fw* character device concerning the FW_CDEV_IOC_GET_INFO ioctl with nonzero fw_cdev_get_info.bus_reset. (Practically all /dev/fw* clients issue this ioctl right after opening the device.) Both bugs are caused by sizeof(struct fw_cdev_event_bus_reset) being 36 without natural alignment and 40 with natural alignment. 1) Memory corruption, affecting i386 userland on amd64 kernel: Userland reserves a 36 bytes large buffer, kernel writes 40 bytes. This has been first found and reported against libraw1394 if compiled with gcc 4.7 which happens to order libraw1394's stack such that the bug became visible as data corruption. 2) Information leak, affecting all kernel architectures except i386: 4 bytes of random kernel stack data were leaked to userspace. Hence limit the respective copy_to_user() to the 32-bit aligned size of struct fw_cdev_event_bus_reset. Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21ACPI: EC: Add a quirk for CLEVO M720T/M730T laptopFeng Tang
commit 67bfa9b60bd689601554526d144b21d529f78a09 upstream. By enlarging the GPE storm threshold back to 20, that laptop's EC works fine with interrupt mode instead of polling mode. https://bugzilla.kernel.org/show_bug.cgi?id=45151 Reported-and-Tested-by: Francesco <trentini@dei.unipd.it> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21ACPI: EC: Make the GPE storm threshold a module parameterFeng Tang
commit a520d52e99b14ba7db135e916348f12f2a6e09be upstream. The Linux EC driver includes a mechanism to detect GPE storms, and switch from interrupt-mode to polling mode. However, polling mode sometimes doesn't work, so the workaround is problematic. Also, different systems seem to need the threshold for detecting the GPE storm at different levels. ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and was changed to 8 in 2.6.28 commit 06cf7d3c7 "ACPI: EC: lower interrupt storm threshold" to fix kernel bug 11892 by forcing the laptop in that bug to work in polling mode. However in bug 45151, it works fine in interrupt mode if we lift the threshold back to 20. This patch makes the threshold a module parameter so that user has a flexible option to debug/workaround this issue. The default is unchanged. This is also a preparation patch to fix specific systems: https://bugzilla.kernel.org/show_bug.cgi?id=45151 Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13mtd: omap2: fix module loadingAndreas Bießmann
commit 4d3d688da8e7016f15483e9319b41311e1db9515 upstream. Unloading the omap2 nand driver missed to release the memory region which will result in not being able to request it again if one want to load the driver later on. This patch fixes following error when loading omap2 module after unloading: ---8<--- ~ $ rmmod omap2 ~ $ modprobe omap2 [ 37.420928] omap2-nand: probe of omap2-nand.0 failed with error -16 ~ $ --->8--- This error was introduced in 67ce04bf2746f8a1f8c2a104b313d20c63f68378 which was the first commit of this driver. Signed-off-by: Andreas Bießmann <andreas@biessmann.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13mtd: omap2: fix omap_nand_remove segfaultAndreas Bießmann
commit 7d9b110269253b1d5858cfa57d68dfc7bf50dd77 upstream. Do not kfree() the mtd_info; it is handled in the mtd subsystem and already freed by nand_release(). Instead kfree() the struct omap_nand_info allocated in omap_nand_probe which was not freed before. This patch fixes following error when unloading the omap2 module: ---8<--- ~ $ rmmod omap2 ------------[ cut here ]------------ kernel BUG at mm/slab.c:3126! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: omap2(-) CPU: 0 Not tainted (3.6.0-rc3-00230-g155e36d-dirty #3) PC is at cache_free_debugcheck+0x2d4/0x36c LR is at kfree+0xc8/0x2ac pc : [<c01125a0>] lr : [<c0112efc>] psr: 200d0193 sp : c521fe08 ip : c0e8ef90 fp : c521fe5c r10: bf0001fc r9 : c521e000 r8 : c0d99c8c r7 : c661ebc0 r6 : c065d5a4 r5 : c65c4060 r4 : c78005c0 r3 : 00000000 r2 : 00001000 r1 : c65c4000 r0 : 00000001 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 86694019 DAC: 00000015 Process rmmod (pid: 549, stack limit = 0xc521e2f0) Stack: (0xc521fe08 to 0xc5220000) fe00: c008a874 c00bf44c c515c6d0 200d0193 c65c4860 c515c240 fe20: c521fe3c c521fe30 c008a9c0 c008a854 c521fe5c c65c4860 c78005c0 bf0001fc fe40: c780ff40 a00d0113 c521e000 00000000 c521fe84 c521fe60 c0112efc c01122d8 fe60: c65c4860 c0673778 c06737ac 00000000 00070013 00000000 c521fe9c c521fe88 fe80: bf0001fc c0112e40 c0673778 bf001ca8 c521feac c521fea0 c02ca11c bf0001ac fea0: c521fec4 c521feb0 c02c82c4 c02ca100 c0673778 bf001ca8 c521fee4 c521fec8 fec0: c02c8dd8 c02c8250 00000000 bf001ca8 bf001ca8 c0804ee0 c521ff04 c521fee8 fee0: c02c804c c02c8d20 bf001924 00000000 bf001ca8 c521e000 c521ff1c c521ff08 ff00: c02c950c c02c7fbc bf001d48 00000000 c521ff2c c521ff20 c02ca3a4 c02c94b8 ff20: c521ff3c c521ff30 bf001938 c02ca394 c521ffa4 c521ff40 c009beb4 bf001930 ff40: c521ff6c 70616d6f b6fe0032 c0014f84 70616d6f b6fe0032 00000081 60070010 ff60: c521ff84 c521ff70 c008e1f4 c00bf328 0001a004 70616d6f c521ff94 0021ff88 ff80: c008e368 0001a004 70616d6f b6fe0032 00000081 c0015028 00000000 c521ffa8 ffa0: c0014dc0 c009bcd0 0001a004 70616d6f bec2ab38 00000880 bec2ab38 00000880 ffc0: 0001a004 70616d6f b6fe0032 00000081 00000319 00000000 b6fe1000 00000000 ffe0: bec2ab30 bec2ab20 00019f00 b6f539c0 60070010 bec2ab38 aaaaaaaa aaaaaaaa Backtrace: [<c01122cc>] (cache_free_debugcheck+0x0/0x36c) from [<c0112efc>] (kfree+0xc8/0x2ac) [<c0112e34>] (kfree+0x0/0x2ac) from [<bf0001fc>] (omap_nand_remove+0x5c/0x64 [omap2]) [<bf0001a0>] (omap_nand_remove+0x0/0x64 [omap2]) from [<c02ca11c>] (platform_drv_remove+0x28/0x2c) r5:bf001ca8 r4:c0673778 [<c02ca0f4>] (platform_drv_remove+0x0/0x2c) from [<c02c82c4>] (__device_release_driver+0x80/0xdc) [<c02c8244>] (__device_release_driver+0x0/0xdc) from [<c02c8dd8>] (driver_detach+0xc4/0xc8) r5:bf001ca8 r4:c0673778 [<c02c8d14>] (driver_detach+0x0/0xc8) from [<c02c804c>] (bus_remove_driver+0x9c/0x104) r6:c0804ee0 r5:bf001ca8 r4:bf001ca8 r3:00000000 [<c02c7fb0>] (bus_remove_driver+0x0/0x104) from [<c02c950c>] (driver_unregister+0x60/0x80) r6:c521e000 r5:bf001ca8 r4:00000000 r3:bf001924 [<c02c94ac>] (driver_unregister+0x0/0x80) from [<c02ca3a4>] (platform_driver_unregister+0x1c/0x20) r5:00000000 r4:bf001d48 [<c02ca388>] (platform_driver_unregister+0x0/0x20) from [<bf001938>] (omap_nand_driver_exit+0x14/0x1c [omap2]) [<bf001924>] (omap_nand_driver_exit+0x0/0x1c [omap2]) from [<c009beb4>] (sys_delete_module+0x1f0/0x2ec) [<c009bcc4>] (sys_delete_module+0x0/0x2ec) from [<c0014dc0>] (ret_fast_syscall+0x0/0x48) r8:c0015028 r7:00000081 r6:b6fe0032 r5:70616d6f r4:0001a004 Code: e1a00005 eb0d9172 e7f001f2 e7f001f2 (e7f001f2) ---[ end trace 6a30b24d8c0cc2ee ]--- Segmentation fault --->8--- This error was introduced in 67ce04bf2746f8a1f8c2a104b313d20c63f68378 which was the first commit of this driver. Signed-off-by: Andreas Bießmann <andreas@biessmann.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13mtd: nand: Use the mirror BBT descriptor when reading its versionShmulik Ladkani
commit 7bb9c75436212813b38700c34df4bbb6eb82debe upstream. The code responsible for reading the version of the mirror bbt was incorrectly using the descriptor of the main bbt. Pass the mirror bbt descriptor to 'scan_read_raw' when reading the version of the mirror bbt. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13mtd: nandsim: bugfix: fail if overridesize is too bigRichard Genoud
commit bb0a13a13411c4ce24c48c8ff3cdf7b48d237240 upstream. If override size is too big, the module was actually loaded instead of failing, because retval was not set. This lead to memory corruption with the use of the freed structs nandsim and nand_chip. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-15 04:41:56 +0000