summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-04-20Revert "net: phy: micrel: Restore led_mode and clk_sel on resume"Greg Kroah-Hartman
This reverts commit d7ba3c00047dfd88fe0360a2d27169b54c88c4f1 which was commit 79e498a9c7da0737829ff864aae44df434105676 upstream. Turns out it breaks things, so drop it. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sasha Levin <alexander.levin@microsoft.com> Cc: Dan Rue <dan.rue@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20lan78xx: Correctly indicate invalid OTPPhil Elwell
[ Upstream commit 4bfc33807a9a02764bdd1e42e794b3b401240f27 ] lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP content, but the value gets overwritten before it is returned and the read goes ahead anyway. Make the read conditional as it should be and preserve the error code. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20vhost: fix vhost_vq_access_ok() log checkStefan Hajnoczi
[ Upstream commit d14d2b78090c7de0557362b26a4ca591aa6a9faa ] Commit d65026c6c62e7d9616c8ceb5a53b68bcdc050525 ("vhost: validate log when IOTLB is enabled") introduced a regression. The logic was originally: if (vq->iotlb) return 1; return A && B; After the patch the short-circuit logic for A was inverted: if (A || vq->iotlb) return A; return B; This patch fixes the regression by rewriting the checks in the obvious way, no longer returning A when vq->iotlb is non-NULL (which is hard to understand). Reported-by: syzbot+65a84dde0214b0387ccd@syzkaller.appspotmail.com Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20slip: Check if rstate is initialized before uncompressingTejaswi Tanikella
[ Upstream commit 3f01ddb962dc506916c243f9524e8bef97119b77 ] On receiving a packet the state index points to the rstate which must be used to fill up IP and TCP headers. But if the state index points to a rstate which is unitialized, i.e. filled with zeros, it gets stuck in an infinite loop inside ip_fast_csum trying to compute the ip checsum of a header with zero length. 89.666953: <2> [<ffffff9dd3e94d38>] slhc_uncompress+0x464/0x468 89.666965: <2> [<ffffff9dd3e87d88>] ppp_receive_nonmp_frame+0x3b4/0x65c 89.666978: <2> [<ffffff9dd3e89dd4>] ppp_receive_frame+0x64/0x7e0 89.666991: <2> [<ffffff9dd3e8a708>] ppp_input+0x104/0x198 89.667005: <2> [<ffffff9dd3e93868>] pppopns_recv_core+0x238/0x370 89.667027: <2> [<ffffff9dd4428fc8>] __sk_receive_skb+0xdc/0x250 89.667040: <2> [<ffffff9dd3e939e4>] pppopns_recv+0x44/0x60 89.667053: <2> [<ffffff9dd4426848>] __sock_queue_rcv_skb+0x16c/0x24c 89.667065: <2> [<ffffff9dd4426954>] sock_queue_rcv_skb+0x2c/0x38 89.667085: <2> [<ffffff9dd44f7358>] raw_rcv+0x124/0x154 89.667098: <2> [<ffffff9dd44f7568>] raw_local_deliver+0x1e0/0x22c 89.667117: <2> [<ffffff9dd44c8ba0>] ip_local_deliver_finish+0x70/0x24c 89.667131: <2> [<ffffff9dd44c92f4>] ip_local_deliver+0x100/0x10c ./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output: ip_fast_csum at arch/arm64/include/asm/checksum.h:40 (inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615 Adding a variable to indicate if the current rstate is initialized. If such a packet arrives, move to toss state. Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWANBassem Boubaker
[ Upstream commit 53765341ee821c0a0f1dec41adc89c9096ad694c ] The Cinterion AHS8 is a 3G device with one embedded WWAN interface using cdc_ether as a driver. The modem is controlled via AT commands through the exposed TTYs. AT+CGDCONT write command can be used to activate or deactivate a WWAN connection for a PDP context defined with the same command. UE supports one WWAN adapter. Signed-off-by: Bassem Boubaker <bassem.boubaker@actia.fr> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20hwmon: (ina2xx) Fix access to uninitialized mutexMarek Szyprowski
commit 0c4c5860e9983eb3da7a3d73ca987643c3ed034b upstream. Initialize data->config_lock mutex before it is used by the driver code. This fixes following warning on Odroid XU3 boards: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14) [<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8) [<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c) [<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850) [<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8) [<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c) [<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24) [<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0) [<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0) [<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0) [<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0) [<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120) [<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c) [<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250) [<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4) [<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8) [<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c) [<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4) [<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114) [<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) Fixes: 5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> [backport to v4.4.y/v4.9.y: context changes] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20rtl8187: Fix NULL pointer dereference in priv->conf_mutexSudhir Sreedharan
commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream. This can be reproduced by bind/unbind the driver multiple times in AM3517 board. Analysis revealed that rtl8187_start() was invoked before probe finishes(ie. before the mutex is initialized). INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14) [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c) [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938) [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c) [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0) [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54) [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320) [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4) [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120) [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c) [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48) [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840) [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4) [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0) [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c) [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = cd1ec000 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) task: ce73eec0 task.stack: cd1ea000 PC is at mutex_lock_nested+0xe8/0x3b0 LR is at mutex_lock_nested+0xd0/0x3b0 Cc: stable@vger.kernel.org Signed-off-by: Sudhir Sreedharan <ssreedharan@mvista.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20s390/qdio: don't merge ERROR output buffersJulian Wiedmann
commit 0cf1e05157b9e5530dcc3ca9fec9bf617fc93375 upstream. On an Output queue, both EMPTY and PENDING buffer states imply that the buffer is ready for completion-processing by the upper-layer drivers. So for a non-QEBSM Output queue, get_buf_states() merges mixed batches of PENDING and EMPTY buffers into one large batch of EMPTY buffers. The upper-layer driver (ie. qeth) later distuingishes PENDING from EMPTY by inspecting the slsb_state for QDIO_OUTBUF_STATE_FLAG_PENDING. But the merge logic in get_buf_states() contains a bug that causes us to erronously also merge ERROR buffers into such a batch of EMPTY buffers (ERROR is 0xaf, EMPTY is 0xa1; so ERROR & EMPTY == EMPTY). Effectively, most outbound ERROR buffers are currently discarded silently and processed as if they had succeeded. Note that this affects _all_ non-QEBSM device types, not just IQD with CQ. Fix it by explicitly spelling out the exact conditions for merging. For extracting the "get initial state" part out of the loop, this relies on the fact that get_buf_states() is never called with a count of 0. The QEBSM path already strictly requires this, and the two callers with variable 'count' make sure of it. Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20s390/qdio: don't retry EQBS after CCQ 96Julian Wiedmann
commit dae55b6fef58530c13df074bcc182c096609339e upstream. Immediate retry of EQBS after CCQ 96 means that we potentially misreport the state of buffers inspected during the first EQBS call. This occurs when 1. the first EQBS finds all inspected buffers still in the initial state set by the driver (ie INPUT EMPTY or OUTPUT PRIMED), 2. the EQBS terminates early with CCQ 96, and 3. by the time that the second EQBS comes around, the state of those previously inspected buffers has changed. If the state reported by the second EQBS is 'driver-owned', all we know is that the previous buffers are driver-owned now as well. But we can't tell if they all have the same state. So for instance - the second EQBS reports OUTPUT EMPTY, but any number of the previous buffers could be OUTPUT ERROR by now, - the second EQBS reports OUTPUT ERROR, but any number of the previous buffers could be OUTPUT EMPTY by now. Effectively, this can result in both over- and underreporting of errors. If the state reported by the second EQBS is 'HW-owned', that doesn't guarantee that the previous buffers have not been switched to driver-owned in the mean time. So for instance - the second EQBS reports INPUT EMPTY, but any number of the previous buffers could be INPUT PRIMED (or INPUT ERROR) by now. This would result in failure to process pending work on the queue. If it's the final check before yielding initiative, this can cause a (temporary) queue stall due to IRQ avoidance. Fixes: 25f269f17316 ("[S390] qdio: EQBS retry after CCQ 96") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20nfit: fix region registration vs block-data-window rangesDan Williams
commit 8d0d8ed3356aa9ed43b819aaedd39b08ca453007 upstream. Commit 1cf03c00e7c1 "nfit: scrub and register regions in a workqueue" mistakenly attempts to register a region per BLK aperture. There is nothing to register for individual apertures as they belong as a set to a BLK aperture group that are registered with a corresponding DIMM-control-region. Filter them for registration to prevent some needless devm_kzalloc() allocations. Cc: <stable@vger.kernel.org> Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20block/loop: fix deadlock after loop_set_statusTetsuo Handa
commit 1e047eaab3bb5564f25b41e9cd3a053009f4e789 upstream. syzbot is reporting deadlocks at __blkdev_get() [1]. ---------------------------------------- [ 92.493919] systemd-udevd D12696 525 1 0x00000000 [ 92.495891] Call Trace: [ 92.501560] schedule+0x23/0x80 [ 92.502923] schedule_preempt_disabled+0x5/0x10 [ 92.504645] __mutex_lock+0x416/0x9e0 [ 92.510760] __blkdev_get+0x73/0x4f0 [ 92.512220] blkdev_get+0x12e/0x390 [ 92.518151] do_dentry_open+0x1c3/0x2f0 [ 92.519815] path_openat+0x5d9/0xdc0 [ 92.521437] do_filp_open+0x7d/0xf0 [ 92.527365] do_sys_open+0x1b8/0x250 [ 92.528831] do_syscall_64+0x6e/0x270 [ 92.530341] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 92.931922] 1 lock held by systemd-udevd/525: [ 92.933642] #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x73/0x4f0 ---------------------------------------- The reason of deadlock turned out that wait_event_interruptible() in blk_queue_enter() got stuck with bdev->bd_mutex held at __blkdev_put() due to q->mq_freeze_depth == 1. ---------------------------------------- [ 92.787172] a.out S12584 634 633 0x80000002 [ 92.789120] Call Trace: [ 92.796693] schedule+0x23/0x80 [ 92.797994] blk_queue_enter+0x3cb/0x540 [ 92.803272] generic_make_request+0xf0/0x3d0 [ 92.807970] submit_bio+0x67/0x130 [ 92.810928] submit_bh_wbc+0x15e/0x190 [ 92.812461] __block_write_full_page+0x218/0x460 [ 92.815792] __writepage+0x11/0x50 [ 92.817209] write_cache_pages+0x1ae/0x3d0 [ 92.825585] generic_writepages+0x5a/0x90 [ 92.831865] do_writepages+0x43/0xd0 [ 92.836972] __filemap_fdatawrite_range+0xc1/0x100 [ 92.838788] filemap_write_and_wait+0x24/0x70 [ 92.840491] __blkdev_put+0x69/0x1e0 [ 92.841949] blkdev_close+0x16/0x20 [ 92.843418] __fput+0xda/0x1f0 [ 92.844740] task_work_run+0x87/0xb0 [ 92.846215] do_exit+0x2f5/0xba0 [ 92.850528] do_group_exit+0x34/0xb0 [ 92.852018] SyS_exit_group+0xb/0x10 [ 92.853449] do_syscall_64+0x6e/0x270 [ 92.854944] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 92.943530] 1 lock held by a.out/634: [ 92.945105] #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x3c/0x1e0 ---------------------------------------- The reason of q->mq_freeze_depth == 1 turned out that loop_set_status() forgot to call blk_mq_unfreeze_queue() at error paths for info->lo_encrypt_type != NULL case. ---------------------------------------- [ 37.509497] CPU: 2 PID: 634 Comm: a.out Tainted: G W 4.16.0+ #457 [ 37.513608] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 37.518832] RIP: 0010:blk_freeze_queue_start+0x17/0x40 [ 37.521778] RSP: 0018:ffffb0c2013e7c60 EFLAGS: 00010246 [ 37.524078] RAX: 0000000000000000 RBX: ffff8b07b1519798 RCX: 0000000000000000 [ 37.527015] RDX: 0000000000000002 RSI: ffffb0c2013e7cc0 RDI: ffff8b07b1519798 [ 37.529934] RBP: ffffb0c2013e7cc0 R08: 0000000000000008 R09: 47a189966239b898 [ 37.532684] R10: dad78b99b278552f R11: 9332dca72259d5ef R12: ffff8b07acd73678 [ 37.535452] R13: 0000000000004c04 R14: 0000000000000000 R15: ffff8b07b841e940 [ 37.538186] FS: 00007fede33b9740(0000) GS:ffff8b07b8e80000(0000) knlGS:0000000000000000 [ 37.541168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 37.543590] CR2: 00000000206fdf18 CR3: 0000000130b30006 CR4: 00000000000606e0 [ 37.546410] Call Trace: [ 37.547902] blk_freeze_queue+0x9/0x30 [ 37.549968] loop_set_status+0x67/0x3c0 [loop] [ 37.549975] loop_set_status64+0x3b/0x70 [loop] [ 37.549986] lo_ioctl+0x223/0x810 [loop] [ 37.549995] blkdev_ioctl+0x572/0x980 [ 37.550003] block_ioctl+0x34/0x40 [ 37.550006] do_vfs_ioctl+0xa7/0x6d0 [ 37.550017] ksys_ioctl+0x6b/0x80 [ 37.573076] SyS_ioctl+0x5/0x10 [ 37.574831] do_syscall_64+0x6e/0x270 [ 37.576769] entry_SYSCALL_64_after_hwframe+0x42/0xb7 ---------------------------------------- [1] https://syzkaller.appspot.com/bug?id=cd662bc3f6022c0979d01a262c318fab2ee9b56f Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <bot+48594378e9851eab70bcd6f99327c7db58c5a28a@syzkaller.appspotmail.com> Fixes: ecdd09597a572513 ("block/loop: fix race between I/O and set_status") Cc: Ming Lei <tom.leiming@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: stable <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20firmware/psci: Expose SMCCC version through psci_opsMark Rutland
From: Marc Zyngier <marc.zyngier@arm.com> commit e78eef554a912ef6c1e0bbf97619dafbeae3339f upstream. Since PSCI 1.0 allows the SMCCC version to be (indirectly) probed, let's do that at boot time, and expose the version of the calling convention as part of the psci_ops structure. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport] Tested-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20firmware/psci: Expose PSCI conduitMark Rutland
From: Marc Zyngier <marc.zyngier@arm.com> commit 09a8d6d48499f93e2abde691f5800081cd858726 upstream. In order to call into the firmware to apply workarounds, it is useful to find out whether we're using HVC or SMC. Let's expose this through the psci_ops. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport] Tested-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20drivers/firmware: Expose psci_get_version through psci_ops structureMark Rutland
From: Will Deacon <will.deacon@arm.com> commit d68e3ba5303f7e1099f51fdcd155f5263da8569b upstream. Entry into recent versions of ARM Trusted Firmware will invalidate the CPU branch predictor state in order to protect against aliasing attacks. This patch exposes the PSCI "VERSION" function via psci_ops, so that it can be invoked outside of the PSCI driver where necessary. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport] Tested-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20radeon: hide pointless #warning when compile testingArnd Bergmann
commit c02216acf4177c4411d33735c81cad687790fa59 upstream. In randconfig testing, we sometimes get this warning: drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create': drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp] #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \ This is rather annoying since almost all other code produces no build-time output unless we have found a real bug. We already fixed this in the amdgpu driver in commit 31bb90f1cd08 ("drm/amdgpu: shut up #warning for compile testing") by adding a CONFIG_COMPILE_TEST check last year and agreed to do the same here, but both Michel and I then forgot about it until I came across the issue again now. For stable kernels, as this is one of very few remaining randconfig warnings in 4.14. Cc: stable@vger.kernel.org Link: https://patchwork.kernel.org/patch/9550009/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20Drivers: hv: vmbus: do not mark HV_PCIE as perf_deviceDexuan Cui
commit 238064f13d057390a8c5e1a6a80f4f0a0ec46499 upstream. The pci-hyperv driver's channel callback hv_pci_onchannelcallback() is not really a hot path, so we don't need to mark it as a perf_device, meaning with this patch all HV_PCIE channels' target_cpu will be CPU0. Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20media: v4l2-compat-ioctl32: don't oops on overlayMauro Carvalho Chehab
commit 85ea29f19eab56ec16ec6b92bc67305998706afa upstream. At put_v4l2_window32(), it tries to access kp->clips. However, kp points to an userspace pointer. So, it should be obtained via get_user(), otherwise it can OOPS: vivid-000: ================== END STATUS ================== BUG: unable to handle kernel paging request at 00000000fffb18e0 IP: [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067 Oops: 0001 [#1] SMP Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media] CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000 RIP: 0010:[<ffffffffc05468d9>] [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP: 0018:ffff8803f5643e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0 Stack: 00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600 ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0 ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640 Call Trace: [<ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev] [<ffffffff81301460>] ? file_has_perm+0x70/0xc0 [<ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200 [<ffffffff8173241a>] sysenter_dispatch+0x7/0x21 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f RIP [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP <ffff8803f5643e28> CR2: 00000000fffb18e0 Tested with vivid driver on Kernel v3.18.102. Same bug happens upstream too: BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev] Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 Call Trace: dump_stack+0x5c/0x7c kasan_report+0x164/0x380 ? __put_v4l2_format32+0x98/0x4d0 [videodev] __put_v4l2_format32+0x98/0x4d0 [videodev] v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a ================================================================== Disabling lock debugging due to kernel taint BUG: unable to handle kernel paging request at 00000000ffe48400 IP: __put_v4l2_format32+0x98/0x4d0 [videodev] PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067 Oops: 0001 [#1] SMP KASAN Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev] RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8 FS: 0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0 Call Trace: v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30 CR2: 00000000ffe48400 cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13Revert "xhci: plat: Register shutdown for xhci_plat"Greg Hackmann
Pixel 2 field testers reported that when they tried to reboot their phones with some USB devices plugged in, the reboot would get wedged and eventually trigger watchdog reset. Once the Pixel kernel team found a reliable repro case, they narrowed it down to this commit's 4.4.y backport. Reverting the change made the issue go away. This reverts commit b07c12517f2aed0add8ce18146bb426b14099392. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13vrf: Fix use after free and double free in vrf_finish_outputDavid Ahern
commit 82dd0d2a9a76fc8fa2b18d80b987d455728bf83a upstream. Miguel reported an skb use after free / double free in vrf_finish_output when neigh_output returns an error. The vrf driver should return after the call to neigh_output as it takes over the skb on error path as well. Patch is a simplified version of Miguel's patch which was written for 4.9, and updated to top of tree. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> [ backport to 4.4 and 4.9 dropped the sock_confirm_neigh and changed neigh_output to dst_neigh_output ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4_core: Fix memory leak while delete slave's resourcesMoshe Shemesh
[ Upstream commit 461d5f1b59490ce0096dfda45e10038c122a7892 ] mlx4_delete_all_resources_for_slave in resource tracker should free all memory allocated for a slave. While releasing memory of fs_rule, it misses releasing memory of fs_rule->mirr_mbox. Fixes: 78efed275117 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13vhost_net: add missing lock nesting notationJason Wang
[ Upstream commit aaa3149bbee9ba9b4e6f0bd6e3e7d191edeae942 ] We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len() after RX virtqueue mutex is held in handle_rx(). This requires an appropriate lock nesting notation to calm down deadlock detector. Fixes: 0308813724606 ("vhost_net: basic polling support") Reported-by: syzbot+7f073540b1384a614e09@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13team: move dev_mc_sync after master_upper_dev_link in team_port_addXin Long
[ Upstream commit 982cf3b3999d39a2eaca0a65542df33c19b5d814 ] The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave' is needed for team driver. The panic can be reproduced easily: ip link add team1 type team ip link set team1 up ip link add link team1 vlan1 type vlan id 80 ip link set vlan1 master team1 Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13vhost: validate log when IOTLB is enabledJason Wang
[ Upstream commit d65026c6c62e7d9616c8ceb5a53b68bcdc050525 ] Vq log_base is the userspace address of bitmap which has nothing to do with IOTLB. So it needs to be validated unconditionally otherwise we may try use 0 as log_base which may lead to pin pages that will lead unexpected result (e.g trigger BUG_ON() in set_bit_to_user()). Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4_en: Fix mixed PFC and Global pause user control requestsEran Ben Elisha
[ Upstream commit 6e8814ceb7e8f468659ef9253bd212c07ae19584 ] Global pause and PFC configuration should be mutually exclusive (i.e. only one of them at most can be set). However, once PFC was turned off, driver automatically turned Global pause on. This is a bug. Fix the driver behaviour to turn off PFC/Global once the user turned the other on. This also fixed a weird behaviour that at a current time, the profile had both PFC and global pause configuration turned on, which is Hardware-wise impossible and caused returning false positive indication to query tools. In addition, fix error code when setting global pause or PFC to change metadata only upon successful change. Also, removed useless debug print. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx5e: Sync netdev vxlan ports at openShahar Klein
[ Upstream commit a117f73dc2430443f23e18367fa545981129c1a6 ] When mlx5_core is loaded it is expected to sync ports with all vxlan devices so it can support vxlan encap/decap. This is done via udp_tunnel_get_rx_info(). Currently this call is set in mlx5e_nic_enable() and if the netdev is not in NETREG_REGISTERED state it will not be called. Normally on load the netdev state is not NETREG_REGISTERED so udp_tunnel_get_rx_info() will not be called. Moving udp_tunnel_get_rx_info() to mlx5e_open() so it will be called on netdev UP event and allow encap/decap. Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered") Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bonding: process the err returned by dev_set_allmulti properly in bond_enslaveXin Long
[ Upstream commit 9f5a90c107741b864398f4ac0014711a8c1d8474 ] When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails, dev_set_promiscuity(-1) should be done before going to the err path. Otherwise, dev->promiscuity will leak. Fixes: 7e1a1ac1fbaa ("bonding: Check return of dev_set_promiscuity/allmulti") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bonding: move dev_mc_sync after master_upper_dev_link in bond_enslaveXin Long
[ Upstream commit ae42cc62a9f07f1f6979054ed92606b9c30f4a2e ] Beniamino found a crash when adding vlan as slave of bond which is also the parent link: ip link add bond1 type bond ip link set bond1 up ip link add link bond1 vlan1 type vlan id 80 ip link set vlan1 master bond1 The call trace is as below: [<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf [<ffffffffa8515680>] _raw_spin_lock+0x20/0x30 [<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80 [<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q] [<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0 [<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80 [<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding] [<ffffffffa8401909>] do_setlink+0x9c9/0xe50 [<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880 [<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260 [<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0 [<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30 [<ffffffffa8424850>] netlink_unicast+0x170/0x210 [<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420 [<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0 This is actually a dead lock caused by sync slave hwaddr from master when the master is the slave's 'slave'. This dead loop check is actually done by netdev_master_upper_dev_link. However, Commit 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") moved it after dev_mc_sync. This patch is to fix it by moving dev_mc_sync after master_upper_dev_link, so that this loop check would be earlier than dev_mc_sync. It also moves if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an improvement. Note team driver also has this issue, I will fix it in another patch. Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") Reported-by: Beniamino Galvani <bgalvani@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bonding: fix the err path for dev hwaddr sync in bond_enslaveXin Long
[ Upstream commit 5c78f6bfae2b10ff70e21d343e64584ea6280c26 ] vlan_vids_add_by_dev is called right after dev hwaddr sync, so on the err path it should unsync dev hwaddr. Otherwise, the slave dev's hwaddr will never be unsync when this err happens. Fixes: 1ff412ad7714 ("bonding: change the bond's vlan syncing functions with the standard ones") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13vhost: correctly remove wait queue during poll failureJason Wang
[ Upstream commit dc6455a71c7fc5117977e197f67f71b49f27baba ] We tried to remove vq poll from wait queue, but do not check whether or not it was in a list before. This will lead double free. Fixing this by switching to use vhost_poll_stop() which zeros poll->wqh after removing poll from waitqueue to make sure it won't be freed twice. Cc: Darren Kenny <darren.kenny@oracle.com> Reported-by: syzbot+c0272972b01b872e604a@syzkaller.appspotmail.com Fixes: 2b8b328b61c79 ("vhost_net: handle polling errors when setting backend") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13sky2: Increase D3 delay to sky2 stops working after suspendKai-Heng Feng
[ Upstream commit afb133637071be6deeb8b3d0e55593ffbf63c527 ] The sky2 ethernet stops working after system resume from suspend: [ 582.852065] sky2 0000:04:00.0: Refused to change power state, currently in D3 The current 150ms delay is not enough, change it to 200ms can solve the issue. BugLink: https://bugs.launchpad.net/bugs/1758507 Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13r8169: fix setting driver_data after register_netdevHeiner Kallweit
[ Upstream commit 19c9ea363a244f85f90a424f9936e6d56449e33c ] pci_set_drvdata() is called only after registering the net_device, therefore we could run into a NPE if one of the functions using driver_data is called before it's set. Fix this by calling pci_set_drvdata() before registering the net_device. This fix is a candidate for stable. As far as I can see the bug has been there in kernel version 3.2 already, therefore I can't provide a reference which commit is fixed by it. The fix may need small adjustments per kernel version because due to other changes the label which is jumped to if register_netdev() fails has changed over time. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13pptp: remove a buggy dst release in pptp_connect()Eric Dumazet
[ Upstream commit bfacfb457b36911a10140b8cb3ce76a74883ac5a ] Once dst has been cached in socket via sk_setup_caps(), it is illegal to call ip_rt_put() (or dst_release()), since sk_setup_caps() did not change dst refcount. We can still dereference it since we hold socket lock. Caugth by syzbot : BUG: KASAN: use-after-free in atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline] BUG: KASAN: use-after-free in dst_release+0x27/0xa0 net/core/dst.c:185 Write of size 4 at addr ffff8801c54dc040 by task syz-executor4/20088 CPU: 1 PID: 20088 Comm: syz-executor4 Not tainted 4.16.0+ #376 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1a7/0x27d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x137/0x190 mm/kasan/kasan.c:267 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278 atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline] dst_release+0x27/0xa0 net/core/dst.c:185 sk_dst_set include/net/sock.h:1812 [inline] sk_dst_reset include/net/sock.h:1824 [inline] sock_setbindtodevice net/core/sock.c:610 [inline] sock_setsockopt+0x431/0x1b20 net/core/sock.c:707 SYSC_setsockopt net/socket.c:1845 [inline] SyS_setsockopt+0x2ff/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4552d9 RSP: 002b:00007f4878126c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007f48781276d4 RCX: 00000000004552d9 RDX: 0000000000000019 RSI: 0000000000000001 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000010 R09: 0000000000000000 R10: 00000000200010c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000526 R14: 00000000006fac30 R15: 0000000000000000 Allocated by task 20088: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:552 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3542 dst_alloc+0x11f/0x1a0 net/core/dst.c:104 rt_dst_alloc+0xe9/0x540 net/ipv4/route.c:1520 __mkroute_output net/ipv4/route.c:2265 [inline] ip_route_output_key_hash_rcu+0xa49/0x2c60 net/ipv4/route.c:2493 ip_route_output_key_hash+0x20b/0x370 net/ipv4/route.c:2322 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x26/0xa0 net/ipv4/route.c:2577 ip_route_output_ports include/net/route.h:163 [inline] pptp_connect+0xa84/0x1170 drivers/net/ppp/pptp.c:453 SYSC_connect+0x213/0x4a0 net/socket.c:1639 SyS_connect+0x24/0x30 net/socket.c:1620 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Freed by task 20082: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:520 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:527 __cache_free mm/slab.c:3486 [inline] kmem_cache_free+0x83/0x2a0 mm/slab.c:3744 dst_destroy+0x266/0x380 net/core/dst.c:140 dst_destroy_rcu+0x16/0x20 net/core/dst.c:153 __rcu_reclaim kernel/rcu/rcu.h:178 [inline] rcu_do_batch kernel/rcu/tree.c:2675 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2930 [inline] __rcu_process_callbacks kernel/rcu/tree.c:2897 [inline] rcu_process_callbacks+0xd6c/0x17b0 kernel/rcu/tree.c:2914 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 The buggy address belongs to the object at ffff8801c54dc000 which belongs to the cache ip_dst_cache of size 168 The buggy address is located 64 bytes inside of 168-byte region [ffff8801c54dc000, ffff8801c54dc0a8) The buggy address belongs to the page: page:ffffea0007153700 count:1 mapcount:0 mapping:ffff8801c54dc000 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffff8801c54dc000 0000000000000000 0000000100000010 raw: ffffea0006b34b20 ffffea0006b6c1e0 ffff8801d674a1c0 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13clk: at91: fix clk-generated compilationAlexandre Belloni
commit 4a5f06a01cfd1f7a9141bdb760bf5b68cca7f224 upstream. Fix missing } Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13random: use lockless method of accessing and updating f->reg_idxTheodore Ts'o
commit 92e75428ffc90e2a0321062379f883f3671cfebe upstream. Linus pointed out that there is a much more efficient way of avoiding the problem that we were trying to address in commit 9dfa7bba35ac0: "fix race in drivers/char/random.c:get_reg()". Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13virtio_net: check return value of skb_to_sgvec in one more locationNathan Chancellor
Kernels that do not have f6b10209b90d ("virtio-net: switch to use build_skb() for small buffer") will have an extra call to skb_to_sgvec that is not handled by e2fcad58fd23 ("virtio_net: check return value of skb_to_sgvec always"). Since the former does not appear to be stable material, just fix the call up directly. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13virtio_net: check return value of skb_to_sgvec alwaysJason A. Donenfeld
commit e2fcad58fd230f635a74e4e983c6f4ea893642d2 upstream. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13mtd: mtd_oobtest: Handle bitflips during readsMiquel Raynal
[ Upstream commit 12663b442e5ac5aa3d6097cd3f287c71ba46d26e ] Reads from NAND devices usually trigger bitflips, this is an expected behavior. While bitflips are under a given threshold, the MTD core returns 0. However, when the number of corrected bitflips is above this same threshold, -EUCLEAN is returned to inform the upper layer that this block is slightly dying and soon the ECC engine will be overtaken so actions should be taken to move the data out of it. This particular condition should not be treated like an error and the test should continue. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13Input: goodix - disable IRQs while suspendedHans de Goede
[ Upstream commit faec44b6838312484d63e82286087cf2d5ebb891 ] We should not try to do any i2c transfers before the controller is resumed (which happens before our resume method gets called). So we need to disable our IRQ while suspended to enforce this. The code paths for devices with GPIOs for the int and reset pins already disable the IRQ the through goodix_free_irq(). This commit also disables the IRQ while suspended for devices without GPIOs for the int and reset pins. This fixes the i2c bus sometimes getting stuck after a suspend/resume causing the touchscreen to sometimes not work after a suspend/resume. This has been tested on a GPD pocked device. BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/ Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13sdhci: Advertise 2.0v supply on SDIO host controllerAndy Shevchenko
[ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13cxgb4vf: Fix SGE FL buffer initialization logic for 64K pagesArjun Vynipadath
[ Upstream commit ea0a42109aee7b92e631c4eb3f2219fadf58acdd ] We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the extant logic would flag that as an error. This was already fixed in cxgb4 driver with "92ddcc7 cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB". Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13EDAC, mv64x60: Fix an error handling pathChristophe JAILLET
[ Upstream commit 68fa24f9121c04ef146b5158f538c8b32f285be5 ] We should not call edac_mc_del_mc() if a corresponding call to edac_mc_add_mc() has not been performed yet. So here, we should go to err instead of err2 to branch at the right place of the error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13tty: n_gsm: Allow ADM response in addition to UA for control dlciTony Lindgren
[ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13scsi: libsas: initialize sas_phy status according to response of DISCOVERchenxiang
[ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ] The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13scsi: libsas: fix error when getting phy eventsJason Yan
[ Upstream commit 2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ] The intend purpose here was to goto out if smp_execute_task() returned error. Obviously something got screwed up. We will never get these link error statistics below: ~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count 0 Obviously we should goto error handler if smp_execute_task() returns non-zero. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: chenqilin <chenqilin2@huawei.com> CC: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13scsi: libsas: fix memory leak in sas_smp_get_phy_events()Jason Yan
[ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: chenqilin <chenqilin2@huawei.com> CC: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bcache: segregate flash only volume write streamsTang Junhui
[ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bcache: stop writeback thread after detachingTang Junhui
[ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling ↵Christophe JAILLET
path [ Upstream commit d0b1d259a4b58b21a21ea82d7174bf7ea825e9cc ] If one 'drm_gem_handle_create()' fails, we leak somes handles and some memory. In order to fix it: - move the 'free(bo_state)' at the end of the function so that it is also called in the eror handling path. This has the side effect to also try to free it if the first 'kcalloc' fails. This is harmless. - add a new label, err_delete_handle, in order to delete already allocated handles in error handling path - remove the now useless 'err' label The way the code is now written will also delete the handles if the 'copy_to_user()' call fails. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170512123803.1886-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13vxlan: dont migrate permanent fdb entries during learnRoopa Prabhu
[ Upstream commit e0090a9e979de5202c7d16c635dea2f005221073 ] This patch fixes vxlan_snoop to not move permanent fdb entries on learn events. This is consistent with the bridge fdb handling of permanent entries. Fixes: 26a41ae60438 ("vxlan: only migrate dynamic FDB entries") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13s390/dasd: fix hanging safe offlineStefan Haberland
[ Upstream commit e8ac01555d9e464249e8bb122337d6d6e5589ccc ] The safe offline processing may hang forever because it waits for I/O which can not be started because of the offline flag that prevents new I/O from being started. Allow I/O to be started during safe offline processing because in this special case we take care that the queues are empty before throwing away the device. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-24 04:59:39 +0000