summaryrefslogtreecommitdiff
path: root/fs/fuse/dir.c
AgeCommit message (Collapse)Author
2014-07-28fuse: ignore entry-timeout on LOOKUP_REVALAnand Avati
commit 154210ccb3a871e631bf39fdeb7a8731d98af87b upstream. The following test case demonstrates the bug: sh# mount -t glusterfs localhost:meta-test /mnt/one sh# mount -t glusterfs localhost:meta-test /mnt/two sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; echo stuff > /mnt/one/file bash: /mnt/one/file: Stale file handle sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; sleep 1; echo stuff > /mnt/one/file On the second open() on /mnt/one, FUSE would have used the old nodeid (file handle) trying to re-open it. Gluster is returning -ESTALE. The ESTALE propagates back to namei.c:filename_lookup() where lookup is re-attempted with LOOKUP_REVAL. The right behavior now, would be for FUSE to ignore the entry-timeout and and do the up-call revalidation. Instead FUSE is ignoring LOOKUP_REVAL, succeeding the revalidation (because entry-timeout has not passed), and open() is again retried on the old file handle and finally the ESTALE is going back to the application. Fix: if revalidation is happening with LOOKUP_REVAL, then ignore entry-timeout and always do the up-call. Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28fuse: timeout comparison fixMiklos Szeredi
commit 126b9d4365b110c157bc4cbc32540dfa66c9c85a upstream. As suggested by checkpatch.pl, use time_before64() instead of direct comparison of jiffies64 values. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-22fuse: don't invalidate attrs when not using atimeAndrew Gallagher
Various read operations (e.g. readlink, readdir) invalidate the cached attrs for atime changes. This patch adds a new function 'fuse_invalidate_atime', which checks for a read-only super block and avoids the attr invalidation in that case. Signed-off-by: Andrew Gallagher <andrewjcg@fb.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-10-24vfs: introduce d_instantiate_no_diralias()Miklos Szeredi
...which just returns -EBUSY if a directory alias would be created. This is to be used by fuse mkdir to make sure that a buggy or malicious userspace filesystem doesn't do anything nasty. Previously fuse used a private mutex for this purpose, which can now go away. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-10-01fuse: no RCU mode in fuse_access()Miklos Szeredi
fuse_access() is never called in RCU walk, only on the final component of access(2) and chdir(2)... Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-10-01fuse: readdirplus: fix RCU walkMiklos Szeredi
Doing dput(parent) is not valid in RCU walk mode. In RCU mode it would probably be okay to update the parent flags, but it's actually not necessary most of the time... So only set the FUSE_I_ADVISE_RDPLUS flag on the parent when the entry was recently initialized by READDIRPLUS. This is achieved by setting FUSE_I_INIT_RDPLUS on entries added by READDIRPLUS and only dropping out of RCU mode if this flag is set. FUSE_I_INIT_RDPLUS is cleared once the FUSE_I_ADVISE_RDPLUS flag is set in the parent. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2013-10-01fuse: don't check_submounts_and_drop() in RCU walkMiklos Szeredi
If revalidate finds an invalid dentry in RCU walk mode, let the VFS deal with it instead of calling check_submounts_and_drop() which is not prepared for being called from RCU walk. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2013-09-12truncate: drop 'oldsize' truncate_pagecache() parameterKirill A. Shutemov
truncate_pagecache() doesn't care about old size since commit cedabed49b39 ("vfs: Fix vmtruncate() regression"). Let's drop it. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse bugfixes from Miklos Szeredi: "Just a bunch of bugfixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use list_for_each_entry() for list traversing fuse: readdir: check for slash in names fuse: hotfix truncate_pagecache() issue fuse: invalidate inode attributes on xattr modification fuse: postpone end_page_writeback() in fuse_writepage_locked()
2013-09-05fuse: drop dentry on failed revalidateAnand Avati
Drop a subtree when we find that it has moved or been delated. This can be done as long as there are no submounts under this location. If the directory was moved and we come across the same directory in a future lookup it will be reconnected by d_materialise_unique(). Signed-off-by: Anand Avati <avati@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-05fuse: clean up return in fuse_dentry_revalidate()Miklos Szeredi
On errors unrelated to the filesystem's state (ENOMEM, ENOTCONN) return the error itself from ->d_revalidate() insted of returning zero (invalid). Also make a common label for invalidating the dentry. This will be used by the next patch. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-05fuse: use d_materialise_unique()Miklos Szeredi
Use d_materialise_unique() instead of d_splice_alias(). This allows dentry subtrees to be moved to a new place if there moved, even if something is referencing a dentry in the subtree (open fd, cwd, etc..). This will also allow us to drop a subtree if it is found to be replaced by something else. In this case the disconnected subtree can later be reconnected to its new location. d_materialise_unique() ensures that a directory entry only ever has one alias. We keep fc->inst_mutex around the calls for d_materialise_unique() on directories to prevent a race with mkdir "stealing" the inode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-03fuse: readdir: check for slash in namesMiklos Szeredi
Userspace can add names containing a slash character to the directory listing. Don't allow this as it could cause all sorts of trouble. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2013-09-03fuse: hotfix truncate_pagecache() issueMaxim Patlasov
The way how fuse calls truncate_pagecache() from fuse_change_attributes() is completely wrong. Because, w/o i_mutex held, we never sure whether 'oldsize' and 'attr->size' are valid by the time of execution of truncate_pagecache(inode, oldsize, attr->size). In fact, as soon as we released fc->lock in the middle of fuse_change_attributes(), we completely loose control of actions which may happen with given inode until we reach truncate_pagecache. The list of potentially dangerous actions includes mmap-ed reads and writes, ftruncate(2) and write(2) extending file size. The typical outcome of doing truncate_pagecache() with outdated arguments is data corruption from user point of view. This is (in some sense) acceptable in cases when the issue is triggered by a change of the file on the server (i.e. externally wrt fuse operation), but it is absolutely intolerable in scenarios when a single fuse client modifies a file without any external intervention. A real life case I discovered by fsx-linux looked like this: 1. Shrinking ftruncate(2) comes to fuse_do_setattr(). The latter sends FUSE_SETATTR to the server synchronously, but before getting fc->lock ... 2. fuse_dentry_revalidate() is asynchronously called. It sends FUSE_LOOKUP to the server synchronously, then calls fuse_change_attributes(). The latter updates i_size, releases fc->lock, but before comparing oldsize vs attr->size.. 3. fuse_do_setattr() from the first step proceeds by acquiring fc->lock and updating attributes and i_size, but now oldsize is equal to outarg.attr.size because i_size has just been updated (step 2). Hence, fuse_do_setattr() returns w/o calling truncate_pagecache(). 4. As soon as ftruncate(2) completes, the user extends file size by write(2) making a hole in the middle of file, then reads data from the hole either by read(2) or mmap-ed read. The user expects to get zero data from the hole, but gets stale data because truncate_pagecache() is not executed yet. The scenario above illustrates one side of the problem: not truncating the page cache even though we should. Another side corresponds to truncating page cache too late, when the state of inode changed significantly. Theoretically, the following is possible: 1. As in the previous scenario fuse_dentry_revalidate() discovered that i_size changed (due to our own fuse_do_setattr()) and is going to call truncate_pagecache() for some 'new_size' it believes valid right now. But by the time that particular truncate_pagecache() is called ... 2. fuse_do_setattr() returns (either having called truncate_pagecache() or not -- it doesn't matter). 3. The file is extended either by write(2) or ftruncate(2) or fallocate(2). 4. mmap-ed write makes a page in the extended region dirty. The result will be the lost of data user wrote on the fourth step. The patch is a hotfix resolving the issue in a simplistic way: let's skip dangerous i_size update and truncate_pagecache if an operation changing file size is in progress. This simplistic approach looks correct for the cases w/o external changes. And to handle them properly, more sophisticated and intrusive techniques (e.g. NFS-like one) would be required. I'd like to postpone it until the issue is well discussed on the mailing list(s). Changed in v2: - improved patch description to cover both sides of the issue. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2013-09-03fuse: invalidate inode attributes on xattr modificationAnand Avati
Calls like setxattr and removexattr result in updation of ctime. Therefore invalidate inode attributes to force a refresh. Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2013-07-17fuse: readdirplus: cleanupMiklos Szeredi
Niels noted that we don't need the 'dentry = NULL' line. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Niels de Vos <ndevos@redhat.com>
2013-07-17fuse: readdirplus: change attributes onceMiklos Szeredi
If we got the inode through fuse_iget() then the attributes are already up-to-date. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-07-17fuse: readdirplus: fix instantiateMiklos Szeredi
Fuse does instantiation slightly differently from NFS/CIFS which use d_materialise_unique(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@vger.kernel.org
2013-07-17fuse: readdirplus: sanity checksMiklos Szeredi
Add sanity checks before adding or updating an entry with data received from readdirplus. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@vger.kernel.org
2013-07-17fuse: readdirplus: fix dentry leakNiels de Vos
In case d_lookup() returns a dentry with d_inode == NULL, the dentry is not returned with dput(). This results in triggering a BUG() in shrink_dcache_for_umount_subtree(): BUG: Dentry ...{i=0,n=...} still in use (1) [unmount of fuse fuse] [SzM: need to d_drop() as well] Reported-by: Justin Clift <jclift@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Brian Foster <bfoster@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> CC: stable@vger.kernel.org
2013-06-29[readdir] convert fuseAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-03fuse: fix readdirplus Oops in fuse_dentry_revalidateMiklos Szeredi
Fix bug introduced by commit 4582a4ab2a "FUSE: Adapt readdirplus to application usage patterns". We need to check for a positive dentry; negative dentries are not added by readdirplus. Secondly we need to advise the use of readdirplus on the *parent*, otherwise the whole thing is useless. Thirdly all this is only relevant if "readdirplus_auto" mode is selected by the filesystem. We advise the use of readdirplus only if the dentry was still valid. If we had to redo the lookup then there was no use in doing the -plus version. Reported-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Feng Shuo <steve.shuo.feng@gmail.com> CC: stable@vger.kernel.org
2013-04-18fuse: truncate file if async dio failedMaxim Patlasov
The patch improves error handling in fuse_direct_IO(): if we successfully submitted several fuse requests on behalf of synchronous direct write extending file and some of them failed, let's try to do our best to clean-up. Changed in v2: reuse fuse_do_setattr(). Thanks to Brian for suggestion. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-07fuse: allow control of adaptive readdirplus useEric Wong
For some filesystems (e.g. GlusterFS), the cost of performing a normal readdir and readdirplus are identical. Since adaptively using readdirplus has no benefit for those systems, give users/filesystems the option to control adaptive readdirplus use. v2 of this patch incorporates Miklos's suggestion to simplify the code, as well as improving consistency of macro names and documentation. Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-02-04fuse: don't WARN when nlink is zeroMiklos Szeredi
drop_nlink() warns if nlink is already zero. This is triggerable by a buggy userspace filesystem. The cure, I think, is worse than the disease so disable the warning. Reported-by: Tero Roponen <tero.roponen@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-31FUSE: Adapt readdirplus to application usage patternsFeng Shuo
Use the same adaptive readdirplus mechanism as NFS: http://permalink.gmane.org/gmane.linux.nfs/49299 If the user space implementation wants to disable readdirplus temporarily, it could just return ENOTSUPP. Then kernel will recall it with readdir. Signed-off-by: Feng Shuo <steve.shuo.feng@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-31Do not use RCU for current process credentialsAnatol Pomozov
Commit c69e8d9c0 added rcu lock to fuse/dir.c It was assuming that 'task' is some other process but in fact this parameter always equals to 'current'. Inline this parameter to make it more readable and remove RCU lock as it is not needed when access current process credentials. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-24fuse: use req->page_descs[] for argpages casesMaxim Patlasov
Previously, anyone who set flag 'argpages' only filled req->pages[] and set per-request page_offset. This patch re-works all cases where argpages=1 to fill req->page_descs[] properly. Having req->page_descs[] filled properly allows to re-work fuse_copy_pages() to copy page fragments described by req->page_descs[]. This will be useful for next patches optimizing direct_IO. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-24fuse: categorize fuse_get_req()Maxim Patlasov
The patch categorizes all fuse_get_req() invocations into two categories: - fuse_get_req_nopages(fc) - when caller doesn't care about req->pages - fuse_get_req(fc, n) - when caller need n page pointers (n > 0) Adding fuse_get_req_nopages() helps to avoid numerous fuse_get_req(fc, 0) scattered over code. Now it's clear from the first glance when a caller need fuse_req with page pointers. The patch doesn't make any logic changes. In multi-page case, it silly allocates array of FUSE_MAX_PAGES_PER_REQ page pointers. This will be amended by future patches. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-24fuse: implement NFS-like readdirplus supportAnand V. Avati
This patch implements readdirplus support in FUSE, similar to NFS. The payload returned in the readdirplus call contains 'fuse_entry_out' structure thereby providing all the necessary inputs for 'faking' a lookup() operation on the spot. If the dentry and inode already existed (for e.g. in a re-run of ls -l) then just the inode attributes timeout and dentry timeout are refreshed. With a simple client->network->server implementation of a FUSE based filesystem, the following performance observations were made: Test: Performing a filesystem crawl over 20,000 files with sh# time ls -lR /mnt Without readdirplus: Run 1: 18.1s Run 2: 16.0s Run 3: 16.2s With readdirplus: Run 1: 4.1s Run 2: 3.8s Run 3: 3.8s The performance improvement is significant as it avoided 20,000 upcalls calls (lookup). Cache consistency is no worse than what already is. Signed-off-by: Anand V. Avati <avati@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2012-11-14userns: Support fuse interacting with multiple user namespacesEric W. Biederman
Use kuid_t and kgid_t in struct fuse_conn and struct fuse_mount_data. The connection between between a fuse filesystem and a fuse daemon is established when a fuse filesystem is mounted and provided with a file descriptor the fuse daemon created by opening /dev/fuse. For now restrict the communication of uids and gids between the fuse filesystem and the fuse daemon to the initial user namespace. Enforce this by verifying the file descriptor passed to the mount of fuse was opened in the initial user namespace. Ensuring the mount happens in the initial user namespace is not necessary as mounts from non-initial user namespaces are not yet allowed. In fuse_req_init_context convert the currrent fsuid and fsgid into the initial user namespace for the request that will be sent to the fuse daemon. In fuse_fill_attr convert the uid and gid passed from the fuse daemon from the initial user namespace into kuids and kgids. In iattr_to_fattr called from fuse_setattr convert kuids and kgids into the uids and gids in the initial user namespace before passing them to the fuse filesystem. In fuse_change_attributes_common called from fuse_dentry_revalidate, fuse_permission, fuse_geattr, and fuse_setattr, and fuse_iget convert the uid and gid from the fuse daemon into a kuid and a kgid to store on the fuse inode. By default fuse mounts are restricted to task whose uid, suid, and euid matches the fuse user_id and whose gid, sgid, and egid matches the fuse group id. Convert the user_id and group_id mount options into kuids and kgids at mount time, and use uid_eq and gid_eq to compare the in fuse_allow_task. Cc: Miklos Szeredi <miklos@szeredi.hu> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-08-15fuse: check create mode in atomic openMiklos Szeredi
Verify that the VFS is passing us a complete create mode with the S_IFREG to atomic open. Reported-by: Steve <steveamigauk@yahoo.co.uk> Reported-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Richard W.M. Jones <rjones@redhat.com>
2012-07-14don't pass nameidata to ->create()Al Viro
boolean "does it have to be exclusive?" flag is passed instead; Local filesystem should just ignore it - the object is guaranteed not to be there yet. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14stop passing nameidata to ->lookup()Al Viro
Just the flags; only NFS cares even about that, but there are legitimate uses for such argument. And getting rid of that completely would require splitting ->lookup() into a couple of methods (at least), so let's leave that alone for now... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14stop passing nameidata * to ->d_revalidate()Al Viro
Just the lookup flags. Die, bastard, die... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14make finish_no_open() return intAl Viro
namely, 1 ;-) That's what we want to return from ->atomic_open() instances after finish_no_open(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14kill struct opendataAl Viro
Just pass struct file *. Methods are happier that way... There's no need to return struct file * from finish_open() now, so let it return int. Next: saner prototypes for parts in namei.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14make ->atomic_open() return intAl Viro
Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14->atomic_open() prototype change - pass int * instead of bool *Al Viro
... and let finish_open() report having opened the file via that sucker. Next step: don't modify od->filp at all. [AV: FILE_CREATE was already used by cifs; Miklos' fix folded] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14fuse: implement i_op->atomic_open()Miklos Szeredi
Add an ->atomic_open implementation which replaces the atomic open+create operation implemented via ->create. No functionality is changed. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14vfs: switch i_dentry/d_alias to hlistAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-14fuse: fix blksize calculationMiklos Szeredi
Don't use inode->i_blkbits which might be stale, instead calculate the blksize information from the freshly obtained attributes. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2012-05-14fuse: fix stat call on 32 bit platformsPavel Shilovsky
Now we store attr->ino at inode->i_ino, return attr->ino at the first time and then return inode->i_ino if the attribute timeout isn't expired. That's wrong on 32 bit platforms because attr->ino is 64 bit and inode->i_ino is 32 bit in this case. Fix this by saving 64 bit ino in fuse_inode structure and returning it every time we call getattr. Also squash attr->ino into inode->i_ino explicitly. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2012-03-05fuse: O_DIRECT support for filesAnand Avati
Implement ->direct_IO() method in aops. The ->direct_IO() method combines the existing fuse_direct_read/fuse_direct_write methods to implement O_DIRECT functionality. Reaching ->direct_IO() in the read path via generic_file_aio_read ensures proper synchronization with page cache with its existing framework. Reaching ->direct_IO() in the write path via fuse_file_aio_write is made to come via generic_file_direct_write() which makes it play nice with the page cache w.r.t other mmap pages etc. On files marked 'direct_io' by the filesystem server, IO always follows the fuse_direct_read/write path. There is no effect of fcntl(O_DIRECT) and it always succeeds. On files not marked with 'direct_io' by the filesystem server, the IO path depends on O_DIRECT flag by the application. This can be passed at the time of open() as well as via fcntl(). Note that asynchronous O_DIRECT iocb jobs are completed synchronously always (this has been the case with FUSE even before this patch) Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2012-03-05fuse: fix nlink after unlinkMiklos Szeredi
Anand Avati reports that the following sequence of system calls fail on a fuse filesystem: create("filename") => 0 link("filename", "linkname") => 0 unlink("filename") => 0 link("linkname", "filename") => -ENOENT ### BUG ### vfs_link() fails with ENOENT if i_nlink is zero, this is done to prevent resurrecting already deleted files. Fuse clears i_nlink on unlink even if there are other links pointing to the file. Reported-by: Anand Avati <avati@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: FUSE: Notifying the kernel of deletion. fuse: support ioctl on directories fuse: Use kcalloc instead of kzalloc to allocate array fuse: llseek optimize SEEK_CUR and SEEK_SET
2012-01-03fuse: propagate umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->mknod() to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-29 13:40:46 +0000