| Age | Commit message (Collapse) | Author |
|---|
|
commit 77ea2a4ba657a1ad4fb7c64bc5cdce84b8a132b6 upstream.
free_holes_block() passed local variable as a block pointer
to ext4_clear_blocks(). Thus ext4_clear_blocks() zeroed out this local
variable instead of proper place in inode / indirect block. We later
zero out proper place in inode / indirect block but don't dirty the
inode / buffer again which can lead to subtle issues (some changes e.g.
to inode can be lost).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 9566d6742852c527bf5af38af5cbb878dad75705 upstream.
While invesgiating the issue where in "mount --bind -oremount,ro ..."
would result in later "mount --bind -oremount,rw" succeeding even if
the mount started off locked I realized that there are several
additional mount flags that should be locked and are not.
In particular MNT_NOSUID, MNT_NODEV, MNT_NOEXEC, and the atime
flags in addition to MNT_READONLY should all be locked. These
flags are all per superblock, can all be changed with MS_BIND,
and should not be changable if set by a more privileged user.
The following additions to the current logic are added in this patch.
- nosuid may not be clearable by a less privileged user.
- nodev may not be clearable by a less privielged user.
- noexec may not be clearable by a less privileged user.
- atime flags may not be changeable by a less privileged user.
The logic with atime is that always setting atime on access is a
global policy and backup software and auditing software could break if
atime bits are not updated (when they are configured to be updated),
and serious performance degradation could result (DOS attack) if atime
updates happen when they have been explicitly disabled. Therefore an
unprivileged user should not be able to mess with the atime bits set
by a more privileged user.
The additional restrictions are implemented with the addition of
MNT_LOCK_NOSUID, MNT_LOCK_NODEV, MNT_LOCK_NOEXEC, and MNT_LOCK_ATIME
mnt flags.
Taken together these changes and the fixes for MNT_LOCK_READONLY
should make it safe for an unprivileged user to create a user
namespace and to call "mount --bind -o remount,... ..." without
the danger of mount flags being changed maliciously.
Cc: stable@vger.kernel.org
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 07b645589dcda8b7a5249e096fece2a67556f0f4 upstream.
There are no races as locked mount flags are guaranteed to never change.
Moving the test into do_remount makes it more visible, and ensures all
filesystem remounts pass the MNT_LOCK_READONLY permission check. This
second case is not an issue today as filesystem remounts are guarded
by capable(CAP_DAC_ADMIN) and thus will always fail in less privileged
mount namespaces, but it could become an issue in the future.
Cc: stable@vger.kernel.org
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit a6138db815df5ee542d848318e5dae681590fccd upstream.
Kenton Varda <kenton@sandstorm.io> discovered that by remounting a
read-only bind mount read-only in a user namespace the
MNT_LOCK_READONLY bit would be cleared, allowing an unprivileged user
to the remount a read-only mount read-write.
Correct this by replacing the mask of mount flags to preserve
with a mask of mount flags that may be changed, and preserve
all others. This ensures that any future bugs with this mask and
remount will fail in an easy to detect way where new mount flags
simply won't change.
Cc: stable@vger.kernel.org
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 295dc39d941dc2ae53d5c170365af4c9d5c16212 upstream.
Currently umount on symlink blocks following umount:
/vz is separate mount
# ls /vz/ -al | grep test
drwxr-xr-x. 2 root root 4096 Jul 19 01:14 testdir
lrwxrwxrwx. 1 root root 11 Jul 19 01:16 testlink -> /vz/testdir
# umount -l /vz/testlink
umount: /vz/testlink: not mounted (expected)
# lsof /vz
# umount /vz
umount: /vz: device is busy. (unexpected)
In this case mountpoint_last() gets an extra refcount on path->mnt
Signed-off-by: Vasily Averin <vvs@openvz.org>
Acked-by: Ian Kent <raven@themaw.net>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit aed8adb7688d5744cb484226820163af31d2499a upstream.
Commit 079148b919d0 ("coredump: factor out the setting of PF_DUMPCORE")
cleaned up the setting of PF_DUMPCORE by removing it from all the
linux_binfmt->core_dump() and moving it to zap_threads().But this ended
up clearing all the previously set flags. This causes issues during
core generation when tsk->flags is checked again (eg. for PF_USED_MATH
to dump floating point registers). Fix this.
Signed-off-by: Silesh C V <svellattu@mvista.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 263782c1c95bbddbb022dc092fd89a36bb8d5577 upstream.
As of commit f8567a3845ac05bb28f3c1b478ef752762bd39ef it is now possible to
have put_reqs_available() called from irq context. While put_reqs_available()
is per cpu, it did not protect itself from interrupts on the same CPU. This
lead to aio_complete() corrupting the available io requests count when run
under a heavy O_DIRECT workloads as reported by Robert Elliott. Fix this by
disabling irq updates around the per cpu batch updates of reqs_available.
Many thanks to Robert and folks for testing and tracking this down.
Reported-by: Robert Elliot <Elliott@hp.com>
Tested-by: Robert Elliot <Elliott@hp.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: Jens Axboe <axboe@kernel.dk>, Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit d68aab6b8f572406aa93b45ef6483934dd3b54a6 upstream.
Commit 1ab6c4997e04 (fs: convert fs shrinkers to new scan/count API)
accidentally removed locking from quota shrinker. Fix it -
dqcache_shrink_scan() should use dq_list_lock to protect the
scan on free_dquots list.
Fixes: 1ab6c4997e04a00c50c6d786c2f046adc0d1f5de
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 154210ccb3a871e631bf39fdeb7a8731d98af87b upstream.
The following test case demonstrates the bug:
sh# mount -t glusterfs localhost:meta-test /mnt/one
sh# mount -t glusterfs localhost:meta-test /mnt/two
sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; echo stuff > /mnt/one/file
bash: /mnt/one/file: Stale file handle
sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; sleep 1; echo stuff > /mnt/one/file
On the second open() on /mnt/one, FUSE would have used the old
nodeid (file handle) trying to re-open it. Gluster is returning
-ESTALE. The ESTALE propagates back to namei.c:filename_lookup()
where lookup is re-attempted with LOOKUP_REVAL. The right
behavior now, would be for FUSE to ignore the entry-timeout and
and do the up-call revalidation. Instead FUSE is ignoring
LOOKUP_REVAL, succeeding the revalidation (because entry-timeout
has not passed), and open() is again retried on the old file
handle and finally the ESTALE is going back to the application.
Fix: if revalidation is happening with LOOKUP_REVAL, then ignore
entry-timeout and always do the up-call.
Signed-off-by: Anand Avati <avati@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 233a01fa9c4c7c41238537e8db8434667ff28a2f upstream.
If the number in "user_id=N" or "group_id=N" mount options was larger than
INT_MAX then fuse returned EINVAL.
Fix this to handle all valid uid/gid values.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 126b9d4365b110c157bc4cbc32540dfa66c9c85a upstream.
As suggested by checkpatch.pl, use time_before64() instead of direct
comparison of jiffies64 values.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 3f1f9b851311a76226140b55b1ea22111234a7c2 upstream.
This fixes the following lockdep complaint:
[ INFO: possible circular locking dependency detected ]
3.16.0-rc2-mm1+ #7 Tainted: G O
-------------------------------------------------------
kworker/u24:0/4356 is trying to acquire lock:
(&(&sbi->s_es_lru_lock)->rlock){+.+.-.}, at: [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0
but task is already holding lock:
(&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180
which lock already depends on the new lock.
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ei->i_es_lock);
lock(&(&sbi->s_es_lru_lock)->rlock);
lock(&ei->i_es_lock);
lock(&(&sbi->s_es_lru_lock)->rlock);
*** DEADLOCK ***
6 locks held by kworker/u24:0/4356:
#0: ("writeback"){.+.+.+}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560
#1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560
#2: (&type->s_umount_key#22){++++++}, at: [<ffffffff811a9c74>] grab_super_passive+0x44/0x90
#3: (jbd2_handle){+.+...}, at: [<ffffffff812979f9>] start_this_handle+0x189/0x5f0
#4: (&ei->i_data_sem){++++..}, at: [<ffffffff81247062>] ext4_map_blocks+0x132/0x550
#5: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180
stack backtrace:
CPU: 0 PID: 4356 Comm: kworker/u24:0 Tainted: G O 3.16.0-rc2-mm1+ #7
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: writeback bdi_writeback_workfn (flush-253:0)
ffffffff8213dce0 ffff880014b07538 ffffffff815df0bb 0000000000000007
ffffffff8213e040 ffff880014b07588 ffffffff815db3dd ffff880014b07568
ffff880014b07610 ffff88003b868930 ffff88003b868908 ffff88003b868930
Call Trace:
[<ffffffff815df0bb>] dump_stack+0x4e/0x68
[<ffffffff815db3dd>] print_circular_bug+0x1fb/0x20c
[<ffffffff810a7a3e>] __lock_acquire+0x163e/0x1d00
[<ffffffff815e89dc>] ? retint_restore_args+0xe/0xe
[<ffffffff815ddc7b>] ? __slab_alloc+0x4a8/0x4ce
[<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0
[<ffffffff810a8707>] lock_acquire+0x87/0x120
[<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0
[<ffffffff8128592d>] ? ext4_es_free_extent+0x5d/0x70
[<ffffffff815e6f09>] _raw_spin_lock+0x39/0x50
[<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0
[<ffffffff8119760b>] ? kmem_cache_alloc+0x18b/0x1a0
[<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0
[<ffffffff812869b8>] ext4_es_insert_extent+0xc8/0x180
[<ffffffff812470f4>] ext4_map_blocks+0x1c4/0x550
[<ffffffff8124c4c4>] ext4_writepages+0x6d4/0xd00
...
Reported-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Minchan Kim <minchan@kernel.org>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5dd214248f94d430d70e9230bda72f2654ac88a8 upstream.
The mount manpage says of the max_batch_time option,
This optimization can be turned off entirely
by setting max_batch_time to 0.
But the code doesn't do that. So fix the code to do
that.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 94d4c066a4ff170a2671b1a9b153febbf36796f6 upstream.
We are spending a lot of time explaining to users what this error
means. Let's try to improve the message to avoid this problem.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit ae0f78de2c43b6fadd007c231a352b13b5be8ed2 upstream.
Make it clear that values printed are times, and that it is error
since last fsck. Also add note about fsck version required.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 61c219f5814277ecb71d64cb30297028d6665979 upstream.
The first time that we allocate from an uninitialized inode allocation
bitmap, if the block allocation bitmap is also uninitalized, we need
to get write access to the block group descriptor before we start
modifying the block group descriptor flags and updating the free block
count, etc. Otherwise, there is the potential of a bad journal
checksum (if journal checksums are enabled), and of the file system
becoming inconsistent if we crash at exactly the wrong time.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 76f47128f9b33af1e96819746550d789054c9664 upstream.
An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.
The vfs, on the other hand, wants null-terminated data.
The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.
The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.
But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.
Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.
In the NFSv2/v3 cases this actually appears to be safe:
- nfs3svc_decode_symlinkargs explicitly null-terminates the data
(after first checking its length and copying it to a new
page).
- NFSv2 limits symlinks to 1k. The buffer holding the rpc
request is always at least a page, and the link data (and
previous fields) have maximum lengths that prevent the request
from reaching the end of a page.
In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.
The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though. It should
really either do the copy itself every time or just require a
null-terminated string.
Reported-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit a93cd4cf86466caa49cfe64607bea7f0bde3f916 upstream.
Hole punching code for files with indirect blocks wrongly computed
number of blocks which need to be cleared when traversing the indirect
block tree. That could result in punching more blocks than actually
requested and thus effectively cause a data loss. For example:
fallocate -n -p 10240000 4096
will punch the range 10240000 - 12632064 instead of the range 1024000 -
10244096. Fix the calculation.
Fixes: 8bad6fc813a3a5300f51369c39d315679fd88c72
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit c5c7b8ddfbf8cb3b2291e515a34ab1b8982f5a2d upstream.
Error recovery in ext4_alloc_branch() calls ext4_forget() even for
buffer corresponding to indirect block it did not allocate. This leads
to brelse() being called twice for that buffer (once from ext4_forget()
and once from cleanup in ext4_ind_map_blocks()) leading to buffer use
count misaccounting. Eventually (but often much later because there
are other users of the buffer) we will see messages like:
VFS: brelse: Trying to free free buffer
Another manifestation of this problem is an error:
JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh);
inconsistent data on disk
The fix is easy - don't forget buffer we did not allocate. Also add an
explanatory comment because the indexing at ext4_alloc_branch() is
somewhat subtle.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
option
commit ce36d9ab3bab06b7b5522f5c8b68fac231b76ffb upstream.
When we SMB3 mounted with mapchars (to allow reserved characters : \ / > < * ?
via the Unicode Windows to POSIX remap range) empty paths
(eg when we open "" to query the root of the SMB3 directory on mount) were not
null terminated so we sent garbarge as a path name on empty paths which caused
SMB2/SMB2.1/SMB3 mounts to fail when mapchars was specified. mapchars is
particularly important since Unix Extensions for SMB3 are not supported (yet)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 22e7478ddbcb670e33fab72d0bbe7c394c3a2c84 upstream.
Prior to commit 0e4f6a791b1e (Fix reiserfs_file_release()), reiserfs
truncates serialized on i_mutex. They mostly still do, with the exception
of reiserfs_file_release. That blocks out other writers via the tailpack
mutex and the inode openers counter adjusted in reiserfs_file_open.
However, NFS will call reiserfs_setattr without having called ->open, so
we end up with a race when nfs is calling ->setattr while another
process is releasing the file. Ultimately, it triggers the
BUG_ON(inode->i_size != new_file_size) check in maybe_indirect_to_direct.
The solution is to pull the lock into reiserfs_setattr to encompass the
truncate_setsize call as well.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 18dd78c427513fb0f89365138be66e6ee8700d1b upstream.
NFS_INO_INVALID_DATA cannot be ignored, even if we have a delegation.
We're still having some problems with data corruption when multiple
clients are appending to a file and those clients are being granted
write delegations on open.
To reproduce:
Client A:
vi /mnt/`hostname -s`
while :; do echo "XXXXXXXXXXXXXXX" >>/mnt/file; sleep $(( $RANDOM % 5 )); done
Client B:
vi /mnt/`hostname -s`
while :; do echo "YYYYYYYYYYYYYYY" >>/mnt/file; sleep $(( $RANDOM % 5 )); done
What's happening is that in nfs_update_inode() we're recognizing that
the file size has changed and we're setting NFS_INO_INVALID_DATA
accordingly, but then we ignore the cache_validity flags in
nfs_write_pageuptodate() because we have a delegation. As a result,
in nfs_updatepage() we're extending the write to cover the full page
even though we've not read in the data to begin with.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit a914722f333b3359d2f4f12919380a334176bb89 upstream.
Otherwise the kernel oopses when remounting with IPv6 server because
net is dereferenced in dev_get_by_name.
Use net ns of current thread so that dev_get_by_name does not operate on
foreign ns. Changing the address is prohibited anyway so this should not
affect anything.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Cc: linux-nfs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 43b6535e717d2f656f71d9bd16022136b781c934 upstream.
Fix a bug, whereby nfs_update_inode() was declaring the inode to be
up to date despite not having checked all the attributes.
The bug occurs because the temporary variable in which we cache
the validity information is 'sanitised' before reapplying to
nfsi->cache_validity.
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 12337901d654415d9f764b5f5ba50052e9700f37 upstream.
Note nobody's ever noticed because the typical client probably never
requests FILES_AVAIL without also requesting something else on the list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 6df200f5d5191bdde4d2e408215383890f956781 upstream.
Return the NULL pointer when the allocation fails.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 72abc8f4b4e8574318189886de627a2bfe6cd0da upstream.
I hit the same assert failed as Dolev Raviv reported in Kernel v3.10
shows like this:
[ 9641.164028] UBIFS assert failed in shrink_tnc at 131 (pid 13297)
[ 9641.234078] CPU: 1 PID: 13297 Comm: mmap.test Tainted: G O 3.10.40 #1
[ 9641.234116] [<c0011a6c>] (unwind_backtrace+0x0/0x12c) from [<c000d0b0>] (show_stack+0x20/0x24)
[ 9641.234137] [<c000d0b0>] (show_stack+0x20/0x24) from [<c0311134>] (dump_stack+0x20/0x28)
[ 9641.234188] [<c0311134>] (dump_stack+0x20/0x28) from [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs])
[ 9641.234265] [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) from [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs])
[ 9641.234307] [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) from [<c00cdad8>] (shrink_slab+0x1d4/0x2f8)
[ 9641.234327] [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) from [<c00d03d0>] (do_try_to_free_pages+0x300/0x544)
[ 9641.234344] [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) from [<c00d0a44>] (try_to_free_pages+0x2d0/0x398)
[ 9641.234363] [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) from [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8)
[ 9641.234382] [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) from [<c00f62d8>] (new_slab+0x78/0x238)
[ 9641.234400] [<c00f62d8>] (new_slab+0x78/0x238) from [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c)
[ 9641.234419] [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) from [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188)
[ 9641.234459] [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) from [<bf227908>] (do_readpage+0x168/0x468 [ubifs])
[ 9641.234553] [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) from [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs])
[ 9641.234606] [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) from [<c00c17c0>] (filemap_fault+0x304/0x418)
[ 9641.234638] [<c00c17c0>] (filemap_fault+0x304/0x418) from [<c00de694>] (__do_fault+0xd4/0x530)
[ 9641.234665] [<c00de694>] (__do_fault+0xd4/0x530) from [<c00e10c0>] (handle_pte_fault+0x480/0xf54)
[ 9641.234690] [<c00e10c0>] (handle_pte_fault+0x480/0xf54) from [<c00e2bf8>] (handle_mm_fault+0x140/0x184)
[ 9641.234716] [<c00e2bf8>] (handle_mm_fault+0x140/0x184) from [<c0316688>] (do_page_fault+0x150/0x3ac)
[ 9641.234737] [<c0316688>] (do_page_fault+0x150/0x3ac) from [<c000842c>] (do_DataAbort+0x3c/0xa0)
[ 9641.234759] [<c000842c>] (do_DataAbort+0x3c/0xa0) from [<c0314e38>] (__dabt_usr+0x38/0x40)
After analyzing the code, I found a condition that may cause this failed
in correct operations. Thus, I think this assertion is wrong and should be
removed.
Suppose there are two clean znodes and one dirty znode in TNC. So the
per-filesystem atomic_t @clean_zn_cnt is (2). If commit start, dirty_znode
is set to COW_ZNODE in get_znodes_to_commit() in case of potentially ops
on this znode. We clear COW bit and DIRTY bit in write_index() without
@tnc_mutex locked. We don't increase @clean_zn_cnt in this place. As the
comments in write_index() shows, if another process hold @tnc_mutex and
dirty this znode after we clean it, @clean_zn_cnt would be decreased to (1).
We will increase @clean_zn_cnt to (2) with @tnc_mutex locked in
free_obsolete_znodes() to keep it right.
If shrink_tnc() performs between decrease and increase, it will release
other 2 clean znodes it holds and found @clean_zn_cnt is less than zero
(1 - 2 = -1), then hit the assertion. Because free_obsolete_znodes() will
soon correct @clean_zn_cnt and no harm to fs in this case, I think this
assertion could be removed.
2 clean zondes and 1 dirty znode, @clean_zn_cnt == 2
Thread A (commit) Thread B (write or others) Thread C (shrinker)
->write_index
->clear_bit(DIRTY_NODE)
->clear_bit(COW_ZNODE)
@clean_zn_cnt == 2
->mutex_locked(&tnc_mutex)
->dirty_cow_znode
->!ubifs_zn_cow(znode)
->!test_and_set_bit(DIRTY_NODE)
->atomic_dec(&clean_zn_cnt)
->mutex_unlocked(&tnc_mutex)
@clean_zn_cnt == 1
->mutex_locked(&tnc_mutex)
->shrink_tnc
->destroy_tnc_subtree
->atomic_sub(&clean_zn_cnt, 2)
->ubifs_assert <- hit
->mutex_unlocked(&tnc_mutex)
@clean_zn_cnt == -1
->mutex_lock(&tnc_mutex)
->free_obsolete_znodes
->atomic_inc(&clean_zn_cnt)
->mutux_unlock(&tnc_mutex)
@clean_zn_cnt == 0 (correct after shrink)
Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 691a7c6f28ac90cccd0dbcf81348ea90b211bdd0 upstream.
There is a race condition in UBIFS:
Thread A (mmap) Thread B (fsync)
->__do_fault ->write_cache_pages
-> ubifs_vm_page_mkwrite
-> budget_space
-> lock_page
-> release/convert_page_budget
-> SetPagePrivate
-> TestSetPageDirty
-> unlock_page
-> lock_page
-> TestClearPageDirty
-> ubifs_writepage
-> do_writepage
-> release_budget
-> ClearPagePrivate
-> unlock_page
-> !(ret & VM_FAULT_LOCKED)
-> lock_page
-> set_page_dirty
-> ubifs_set_page_dirty
-> TestSetPageDirty (set page dirty without budgeting)
-> unlock_page
This leads to situation where we have a diry page but no budget allocated for
this page, so further write-back may fail with -ENOSPC.
In this fix we return from page_mkwrite without performing unlock_page. We
return VM_FAULT_LOCKED instead. After doing this, the race above will not
happen.
Signed-off-by: hujianyang <hujianyang@huawei.com>
Tested-by: Laurence Withers <lwithers@guralp.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
This reverts commit 0e2e24e5dc6eb6f0698e9dc97e652f132b885624, which
was applied twice mistakenly. The first one is
bee3f7b8188d4b2a5dfaeb2eb4a68d99f67daecf.
Reported-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
|
|
commit f9fd0135610084abef6867d984e9951c3099950d upstream.
For discard operation, we should return EINVAL if the given range length
is less than a block size, otherwise it will go through the file system
to discard data blocks as the end range might be evaluated to -1, e.g,
/xfs7: 9811378176 bytes were trimmed
This issue can be triggered via xfstests/generic/288.
Also, it seems to get the request queue pointer via bdev_get_queue()
instead of the hard code pointer dereference is not a bad thing.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 273203699f82667296e1f14344c5a5a6c4600470 upstream.
Removing an inode from the namespace involves removing the directory
entry and dropping the link count on the inode. Removing the
directory entry can result in locking an AGF (directory blocks were
freed) and removing a link count can result in placing the inode on
an unlinked list which results in locking an AGI.
The big problem here is that we have an ordering constraint on AGF
and AGI locking - inode allocation locks the AGI, then can allocate
a new extent for new inodes, locking the AGF after the AGI.
Similarly, freeing the inode removes the inode from the unlinked
list, requiring that we lock the AGI first, and then freeing the
inode can result in an inode chunk being freed and hence freeing
disk space requiring that we lock an AGF.
Hence the ordering that is imposed by other parts of the code is AGI
before AGF. This means we cannot remove the directory entry before
we drop the inode reference count and put it on the unlinked list as
this results in a lock order of AGF then AGI, and this can deadlock
against inode allocation and freeing. Therefore we must drop the
link counts before we remove the directory entry.
This is still safe from a transactional point of view - it is not
until we get to xfs_bmap_finish() that we have the possibility of
multiple transactions in this operation. Hence as long as we remove
the directory entry and drop the link count in the first transaction
of the remove operation, there are no transactional constraints on
the ordering here.
Change the ordering of the operations in the xfs_remove() function
to align the ordering of AGI and AGF locking to match that of the
rest of the code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit bb86d21cba22a045b09d11b71decf5ca7c3d5def upstream.
At xfs_iext_add(), if extent(s) are being appended to the last page in
the indirection array and the new extent(s) don't fit in the page, the
number of extents(erp->er_extcount) in a new allocated entry should be
the minimum value between count and XFS_LINEAR_EXTS, instead of count.
For now, there is no existing test case can demonstrates a problem with
the er_extcount being set incorrectly here, but it obviously like a bug.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 643f7c4e5656bd18c769211f933190f7bb738245 upstream.
In xlog_verify_iclog a debug check of the incore log buffers prints an
error if icptr is null and then goes on to dereference the pointer
regardless. Convert this to an assert so that the intention is clear.
This was reported by Coverty.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit ad22c7a043c2cc6792820e6c5da699935933e87d upstream.
Page cache allocation doesn't always go through ->begin_write and
hence we don't always get the opportunity to set the allocation
context to GFP_NOFS. Failing to do this means we open up the direct
relcaim stack to recurse into the filesystem and consume a
significant amount of stack.
On RHEL6.4 kernels we are seeing ra_submit() and
generic_file_splice_read() from an nfsd context recursing into the
filesystem via the inode cache shrinker and evicting inodes. This is
causing truncation to be run (e.g EOF block freeing) and causing
bmap btree block merges and free space btree block splits to occur.
These btree manipulations are occurring with the call chain already
30 functions deep and hence there is not enough stack space to
complete such operations.
To avoid these specific overruns, we need to prevent the page cache
allocation from recursing via direct reclaim. We can do that because
the allocation functions take the allocation context from that which
is stored in the mapping for the inode. We don't set that right now,
so the default is GFP_HIGHUSER_MOVABLE, which is effectively a
GFP_KERNEL context. We need it to be the equivalent of GFP_NOFS, so
when we initialise an inode, set the mapping gfp mask appropriately.
This makes the use of AOP_FLAG_NOFS redundant from other parts of
the XFS IO path, so get rid of it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 59e5a0e821d838854b3afd030d31f82cee3ecd58 upstream.
When xfs_growfs_data_private() is updating backup superblocks,
it bails out on the first error encountered, whether reading or
writing:
* If we get an error writing out the alternate superblocks,
* just issue a warning and continue. The real work is
* already done and committed.
This can cause a problem later during repair, because repair
looks at all superblocks, and picks the most prevalent one
as correct. If we bail out early in the backup superblock
loop, we can end up with more "bad" matching superblocks than
good, and a post-growfs repair may revert the filesystem to
the old geometry.
With the combination of superblock verifiers and old bugs,
we're more likely to encounter read errors due to verification.
And perhaps even worse, we don't even properly write any of the
newly-added superblocks in the new AGs.
Even with this change, growfs will still say:
xfs_growfs: XFS_IOC_FSGROWFSDATA xfsctl failed: Structure needs cleaning
data blocks changed from 319815680 to 335216640
which might be confusing to the user, but it at least communicates
that something has gone wrong, and dmesg will probably highlight
the need for an xfs_repair.
And this is still best-effort; if verifiers fail on more than
half the backup supers, they may still "win" - but that's probably
best left to repair to more gracefully handle by doing its own
strict verification as part of the backup super "voting."
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 31625f28ad7be67701dc4cefcf52087addd88af4 upstream.
If we get EWRONGFS due to probing of non-xfs filesystems,
there's no need to issue the scary corruption error and backtrace.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 2c6e24ce1aa6b3b147c75d488c2797ee258eb22b upstream.
Recent analysis of a deadlocked XFS filesystem from a kernel
crash dump indicated that the filesystem was stuck waiting for log
space. The short story of the hang on the RHEL6 kernel is this:
- the tail of the log is pinned by an inode
- the inode has been pushed by the xfsaild
- the inode has been flushed to it's backing buffer and is
currently flush locked and hence waiting for backing
buffer IO to complete and remove it from the AIL
- the backing buffer is marked for write - it is on the
delayed write queue
- the inode buffer has been modified directly and logged
recently due to unlinked inode list modification
- the backing buffer is pinned in memory as it is in the
active CIL context.
- the xfsbufd won't start buffer writeback because it is
pinned
- xfssyncd won't force the log because it sees the log as
needing to be covered and hence wants to issue a dummy
transaction to move the log covering state machine along.
Hence there is no trigger to force the CIL to the log and hence
unpin the inode buffer and therefore complete the inode IO, remove
it from the AIL and hence move the tail of the log along, allowing
transactions to start again.
Mainline kernels also have the same deadlock, though the signature
is slightly different - the inode buffer never reaches the delayed
write lists because xfs_buf_item_push() sees that it is pinned and
hence never adds it to the delayed write list that the xfsaild
flushes.
There are two possible solutions here. The first is to simply force
the log before trying to cover the log and so ensure that the CIL is
emptied before we try to reserve space for the dummy transaction in
the xfs_log_worker(). While this might work most of the time, it is
still racy and is no guarantee that we don't get stuck in
xfs_trans_reserve waiting for log space to come free. Hence it's not
the best way to solve the problem.
The second solution is to modify xfs_log_need_covered() to be aware
of the CIL. We only should be attempting to cover the log if there
is no current activity in the log - covering the log is the process
of ensuring that the head and tail in the log on disk are identical
(i.e. the log is clean and at idle). Hence, by definition, if there
are items in the CIL then the log is not at idle and so we don't
need to attempt to cover it.
When we don't need to cover the log because it is active or idle, we
issue a log force from xfs_log_worker() - if the log is idle, then
this does nothing. However, if the log is active due to there being
items in the CIL, it will force the items in the CIL to the log and
unpin them.
In the case of the above deadlock scenario, instead of
xfs_log_worker() getting stuck in xfs_trans_reserve() attempting to
cover the log, it will instead force the log, thereby unpinning the
inode buffer, allowing IO to be issued and complete and hence
removing the inode that was pinning the tail of the log from the
AIL. At that point, everything will start moving along again. i.e.
the xfs_log_worker turns back into a watchdog that can alleviate
deadlocks based around pinned items that prevent the tail of the log
from being moved...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 17ec81c15fd022842f9bc947841ba9fb9eb52591 upstream.
At xfs_iext_realloc_direct(), the new_size is changed by adding
if_bytes if originally the extent records are stored at the inline
extent buffer, and we have to switch from it to a direct extent
list for those new allocated extents, this is wrong. e.g,
Create a file with three extents which was showing as following,
xfs_io -f -c "truncate 100m" /xfs/testme
for i in $(seq 0 5 10); do
offset=$(($i * $((1 << 20))))
xfs_io -c "pwrite $offset 1m" /xfs/testme
done
Inline
------
irec: if_bytes bytes_diff new_size
1st 0 16 16
2nd 16 16 32
Switching
--------- rnew_size
3rd 32 16 48 + 32 = 80 roundup=128
In this case, the desired value of new_size should be 48, and then
it will be roundup to 64 and be assigned to rnew_size.
However, this issue has been covered by resetting the if_bytes to
the new_size which is calculated at the begnning of xfs_iext_add()
before leaving out this function, and in turn make the rnew_size
correctly again. Hence, this can not be detected via xfstestes.
This patch fix above problem and revise the new_size comments at
xfs_iext_realloc_direct() to make it more readable. Also, fix the
comments while switching from the inline extent buffer to a direct
extent list to reflect this change.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 3e2426bd0eb980648449e7a2f5a23e3cd3c7725c upstream.
If this condition in end_extent_writepage() is false:
if (tree->ops && tree->ops->writepage_end_io_hook)
we will then test an uninitialized "ret" at:
ret = ret < 0 ? ret : -EIO;
The test for ret is for the case where ->writepage_end_io_hook
failed, and we'd choose that ret as the error; but if
there is no ->writepage_end_io_hook, nothing sets ret.
Initializing ret to 0 should be sufficient; if
writepage_end_io_hook wasn't set, (!uptodate) means
non-zero err was passed in, so we choose -EIO in that case.
Signed-of-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 6eda71d0c030af0fc2f68aaa676e6d445600855b upstream.
The skinny extents are intepreted incorrectly in scrub_print_warning(),
and end up hitting the BUG() in btrfs_extent_inline_ref_size.
Reported-by: Konstantinos Skarlatos <k.skarlatos@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit cd857dd6bc2ae9ecea14e75a34e8a8fdc158e307 upstream.
We want to make sure the point is still within the extent item, not to verify
the memory it's pointing to.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 8321cf2596d283821acc466377c2b85bcd3422b7 upstream.
There is otherwise a risk of a possible null pointer dereference.
Was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 1af56070e3ef9477dbc7eba3b9ad7446979c7974 upstream.
If we are doing an incremental send and the base snapshot has a
directory with name X that doesn't exist anymore in the second
snapshot and a new subvolume/snapshot exists in the second snapshot
that has the same name as the directory (name X), the incremental
send would fail with -ENOENT error. This is because it attempts
to lookup for an inode with a number matching the objectid of a
root, which doesn't exist.
Steps to reproduce:
mkfs.btrfs -f /dev/sdd
mount /dev/sdd /mnt
mkdir /mnt/testdir
btrfs subvolume snapshot -r /mnt /mnt/mysnap1
rmdir /mnt/testdir
btrfs subvolume create /mnt/testdir
btrfs subvolume snapshot -r /mnt /mnt/mysnap2
btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/send.data
A test case for xfstests follows.
Reported-by: Robert White <rwhite@pobox.com>
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 298658414a2f0bea1f05a81876a45c1cd96aa2e0 upstream.
Seeding device support allows us to create a new filesystem
based on existed filesystem.
However newly created filesystem's @total_devices should include seed
devices. This patch fix the following problem:
# mkfs.btrfs -f /dev/sdb
# btrfstune -S 1 /dev/sdb
# mount /dev/sdb /mnt
# btrfs device add -f /dev/sdc /mnt --->fs_devices->total_devices = 1
# umount /mnt
# mount /dev/sdc /mnt --->fs_devices->total_devices = 2
This is because we record right @total_devices in superblock, but
@fs_devices->total_devices is reset to be 0 in btrfs_prepare_sprout().
Fix this problem by not resetting @fs_devices->total_devices.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5dca6eea91653e9949ce6eb9e9acab6277e2f2c4 upstream.
According to commit 865ffef3797da2cac85b3354b5b6050dc9660978
(fs: fix fsync() error reporting),
it's not stable to just check error pages because pages can be
truncated or invalidated, we should also mark mapping with error
flag so that a later fsync can catch the error.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 29cc83f69c8338ff8fd1383c9be263d4bdf52d73 upstream.
Same as normal devices, seed devices should be initialized with
fs_info->dev_root as well, otherwise we'll get a NULL pointer crash.
Cc: Chris Murphy <lists@colorremedies.com>
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit de348ee022175401e77d7662b7ca6e231a94e3fd upstream.
In close_ctree(), after we have stopped all workers,there maybe still
some read requests(for example readahead) to submit and this *maybe* trigger
an oops that user reported before:
kernel BUG at fs/btrfs/async-thread.c:619!
By hacking codes, i can reproduce this problem with one cpu available.
We fix this potential problem by invalidating all btree inode pages before
stopping all workers.
Thanks to Miao for pointing out this problem.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 32d6b47fe6fc1714d5f1bba1b9f38e0ab0ad58a8 upstream.
If we fail to load a free space cache, we can rebuild it from the extent tree,
so it is not a serious error, we should not output a error message that
would make the users uncomfortable. This patch uses warning message instead
of it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5a1972bd9fd4b2fb1bac8b7a0b636d633d8717e3 upstream.
Btrfs will send uevent to udev inform the device change,
but ctime/mtime for the block device inode is not udpated, which cause
libblkid used by btrfs-progs unable to detect device change and use old
cache, causing 'btrfs dev scan; btrfs dev rmove; btrfs dev scan' give an
error message.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Cc: Karel Zak <kzak@redhat.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 7d78874273463a784759916fc3e0b4e2eb141c70 upstream.
We need to NULL the cached_state after freeing it, otherwise
we might free it again if find_delalloc_range doesn't find anything.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
