summaryrefslogtreecommitdiff
path: root/include/linux/cs5535.h
AgeCommit message (Collapse)Author
2011-07-06x86, olpc: Add XO-1 RTC driverDaniel Drake
Add a driver to configure the XO-1 RTC via CS5536 MSRs, to be used as a system wakeup source via olpc-xo1-pm. Device detection is based on finding the relevant device tree node. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-11-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-06x86, olpc-xo1-sci: Add lid switch functionalityDaniel Drake
Configure the XO-1's lid switch GPIO to trigger an SCI interrupt, and correctly expose this input device which can be used as a wakeup source. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-9-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-06x86, olpc-xo1-sci: Add GPE handler and ebook switch functionalityDaniel Drake
The EC in the OLPC XO-1 delivers GPE events to provide various notifications. Add the basic code for GPE/EC event processing and enable the ebook switch, which can be used as a wakeup source. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-8-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-06x86, olpc: Add XO-1 SCI driver and power button controlDaniel Drake
The System Control Interrupt is used in the OLPC XO-1 to control various features of the laptop. Add the driver base and the power button functionality. This driver can't be built as a module, because functionality added in future patches means that some drivers need to know at boot-time whether SCI-based functionality is available. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-6-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-06x86, olpc: Add XO-1 suspend/resume supportDaniel Drake
Add code needed for basic suspend/resume of the XO-1 laptop. Based on earlier work by Jordan Crouse, Andres Salomon, and others. This patch incorporates all earlier feedback from Thomas Gleixner. To clarify a certain point (now more obvious in the code itself): On resume, OpenFirmware returns execution to Linux in protected mode with a kernel-compatible GDT already set up. The changes and simplifications suggested have all been included. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-5-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-06x86, olpc: Move CS5536-related constants to cs5535.hDaniel Drake
Move these definitions into the relevant header file. This was requested in the review of the upcoming XO-1 suspend/resume code. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-3-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-01-13drivers/staging/olpc_dcon: convert to new cs5535 gpio APIAndres Salomon
Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gpio API in other places. Note that we don't actually clean up the driver properly yet (once loaded, it always remains loaded). That'll come later.. This patch is necessary for building the driver. Signed-off-by: Andres Salomon <dilinger@queued.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13drivers/gpio/cs5535-gpio.c: add some additional cs5535-specific GPIO ↵Andres Salomon
functionality This adds (well, re-adds actually) handling for events/IRQs through cs5535 GPIOs. In the wild and wooly world of CS5535, setup_event() is for assigning an IRQ to a GPIO filter/event pair, and set_irq() sets up the pair to trigger IRQs. These should really only be used in highly platform-specific drivers (such as OLPC's DCON driver). Sadly, because set_irq() uses MSRs, this causes the driver to become X86-specific. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15cs5535: define lxfb/gxfb MSRs in linux/cs5535.hAndres Salomon
..and include them in the lxfb/gxfb drivers rather than asm/geode.h (where possible). Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15cs5535: move VSA2 checks into linux/cs5535.hAndres Salomon
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15cs5535: move the DIVIL MSR definition into linux/cs5535.hAndres Salomon
The only thing that uses this is the reboot_fixups code. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15cs5535: add a generic MFGPT driverAndres Salomon
This is based on the old code on arch/x86/kernel/mfgpt_32.c, except it's not x86 specific, it's modular, and it makes use of a PCI BAR rather than a random MSR. Currently module unloading is not supported; it's uncertain whether or not it can be made work with the hardware. [akpm@linux-foundation.org: add X86 dependency] Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15cs5535-gpio: add AMD CS5535/CS5536 GPIO driver supportAndres Salomon
This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend (allowing GPIO users to use the generic GPIO API if desired) while also allowing architecture-specific users directly (via the cs5535_gpio_* functions). Tested on an OLPC machine. Some Leemotes also use CS5536 (with a mips cpu), which is why this is in drivers/gpio rather than arch/x86. Currently, it conflicts with older geode GPIO support; once MFGPT support is reworked to also be more generic, the older geode code will be removed. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Reviewed-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-28 06:30:16 +0000