summaryrefslogtreecommitdiff
path: root/include/linux/device.h
AgeCommit message (Collapse)Author
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Assorted fixes and cleanups to the existing drivers plus a new driver for IMS Passenger Control Unit device they use for ther in-flight entertainment system." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: trackpoint - Optimize trackpoint init to use power-on reset Input: apbps2 - convert to devm_ioremap_resource() Input: ALPS - use %ph to print buffers ARM - shmobile: Armadillo800EVA: Move st1232 reset pin handling Input: st1232 - add reset pin handling Input: st1232 - convert to devm_* infrastructure Input: MT - handle semi-mt devices in core Input: adxl34x - use spi_get_drvdata() Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata() Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata() Input: ims-pcu - fix a memory leak on error Input: sysrq - supplement reset sequence with timeout functionality Input: tegra-kbc - support for defining row/columns based on SoC Input: imx_keypad - switch to using managed resources Input: arc_ps2 - add support for device tree Input: mma8450 - fix signed 12bits to 32bits conversion Input: eeti_ts - remove redundant null check Input: edt-ft5x06 - remove redundant null check before kfree Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functions Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functions ...
2013-04-29Merge branch 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue updates from Tejun Heo: "A lot of activities on workqueue side this time. The changes achieve the followings. - WQ_UNBOUND workqueues - the workqueues which are per-cpu - are updated to be able to interface with multiple backend worker pools. This involved a lot of churning but the end result seems actually neater as unbound workqueues are now a lot closer to per-cpu ones. - The ability to interface with multiple backend worker pools are used to implement unbound workqueues with custom attributes. Currently the supported attributes are the nice level and CPU affinity. It may be expanded to include cgroup association in future. The attributes can be specified either by calling apply_workqueue_attrs() or through /sys/bus/workqueue/WQ_NAME/* if the workqueue in question is exported through sysfs. The backend worker pools are keyed by the actual attributes and shared by any workqueues which share the same attributes. When attributes of a workqueue are changed, the workqueue binds to the worker pool with the specified attributes while leaving the work items which are already executing in its previous worker pools alone. This allows converting custom worker pool implementations which want worker attribute tuning to use workqueues. The writeback pool is already converted in block tree and there are a couple others are likely to follow including btrfs io workers. - WQ_UNBOUND's ability to bind to multiple worker pools is also used to make it NUMA-aware. Because there's no association between work item issuer and the specific worker assigned to execute it, before this change, using unbound workqueue led to unnecessary cross-node bouncing and it couldn't be helped by autonuma as it requires tasks to have implicit node affinity and workers are assigned randomly. After these changes, an unbound workqueue now binds to multiple NUMA-affine worker pools so that queued work items are executed in the same node. This is turned on by default but can be disabled system-wide or for individual workqueues. Crypto was requesting NUMA affinity as encrypting data across different nodes can contribute noticeable overhead and doing it per-cpu was too limiting for certain cases and IO throughput could be bottlenecked by one CPU being fully occupied while others have idle cycles. While the new features required a lot of changes including restructuring locking, it didn't complicate the execution paths much. The unbound workqueue handling is now closer to per-cpu ones and the new features are implemented by simply associating a workqueue with different sets of backend worker pools without changing queue, execution or flush paths. As such, even though the amount of change is very high, I feel relatively safe in that it isn't likely to cause subtle issues with basic correctness of work item execution and handling. If something is wrong, it's likely to show up as being associated with worker pools with the wrong attributes or OOPS while workqueue attributes are being changed or during CPU hotplug. While this creates more backend worker pools, it doesn't add too many more workers unless, of course, there are many workqueues with unique combinations of attributes. Assuming everything else is the same, NUMA awareness costs an extra worker pool per NUMA node with online CPUs. There are also a couple things which are being routed outside the workqueue tree. - block tree pulled in workqueue for-3.10 so that writeback worker pool can be converted to unbound workqueue with sysfs control exposed. This simplifies the code, makes writeback workers NUMA-aware and allows tuning nice level and CPU affinity via sysfs. - The conversion to workqueue means that there's no 1:1 association between a specific worker, which makes writeback folks unhappy as they want to be able to tell which filesystem caused a problem from backtrace on systems with many filesystems mounted. This is resolved by allowing work items to set debug info string which is printed when the task is dumped. As this change involves unifying implementations of dump_stack() and friends in arch codes, it's being routed through Andrew's -mm tree." * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (84 commits) workqueue: use kmem_cache_free() instead of kfree() workqueue: avoid false negative WARN_ON() in destroy_workqueue() workqueue: update sysfs interface to reflect NUMA awareness and a kernel param to disable NUMA affinity workqueue: implement NUMA affinity for unbound workqueues workqueue: introduce put_pwq_unlocked() workqueue: introduce numa_pwq_tbl_install() workqueue: use NUMA-aware allocation for pool_workqueues workqueue: break init_and_link_pwq() into two functions and introduce alloc_unbound_pwq() workqueue: map an unbound workqueues to multiple per-node pool_workqueues workqueue: move hot fields of workqueue_struct to the end workqueue: make workqueue->name[] fixed len workqueue: add workqueue->unbound_attrs workqueue: determine NUMA node of workers accourding to the allowed cpumask workqueue: drop 'H' from kworker names of unbound worker pools workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[] workqueue: move pwq_pool_locking outside of get/put_unbound_pool() workqueue: fix memory leak in apply_workqueue_attrs() workqueue: fix unbound workqueue attrs hashing / comparison workqueue: fix race condition in unbound workqueue free path workqueue: remove pwq_lock which is no longer used ...
2013-04-11driver core: handle user namespaces properly with the uid/gid devtmpfs changeGreg Kroah-Hartman
Now that devtmpfs is caring about uid/gid, we need to use the correct internal types so users who have USER_NS enabled will have things work properly for them. Thanks to Eric for pointing this out, and the patch review. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08driver core: add uid and gid to devtmpfsKay Sievers
Some drivers want to tell userspace what uid and gid should be used for their device nodes, so allow that information to percolate through the driver core to userspace in order to make this happen. This means that some systems (i.e. Android and friends) will not need to even run a udev-like daemon for their device node manager and can just rely in devtmpfs fully, reducing their footprint even more. Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-17Merge tag 'v3.9-rc3' into nextDmitry Torokhov
Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().
2013-03-13device: separate all subsys mutexesMichal Hocko
ca22e56d (driver-core: implement 'sysdev' functionality for regular devices and buses) has introduced bus_register macro with a static key to distinguish different subsys mutex classes. This however doesn't work for different subsys which use a common registering function. One example is subsys_system_register (and mce_device and cpu_device). In the end this leads to the following lockdep splat: [ 207.271924] ====================================================== [ 207.271932] [ INFO: possible circular locking dependency detected ] [ 207.271942] 3.9.0-rc1-0.7-default+ #34 Not tainted [ 207.271948] ------------------------------------------------------- [ 207.271957] bash/10493 is trying to acquire lock: [ 207.271963] (subsys mutex){+.+.+.}, at: [<ffffffff8134af27>] bus_remove_device+0x37/0x1c0 [ 207.271987] [ 207.271987] but task is already holding lock: [ 207.271995] (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81046ccf>] cpu_hotplug_begin+0x2f/0x60 [ 207.272012] [ 207.272012] which lock already depends on the new lock. [ 207.272012] [ 207.272023] [ 207.272023] the existing dependency chain (in reverse order) is: [ 207.272033] [ 207.272033] -> #4 (cpu_hotplug.lock){+.+.+.}: [ 207.272044] [<ffffffff810ae329>] lock_acquire+0xe9/0x120 [ 207.272056] [<ffffffff814ad807>] mutex_lock_nested+0x37/0x360 [ 207.272069] [<ffffffff81046ba9>] get_online_cpus+0x29/0x40 [ 207.272082] [<ffffffff81185210>] drain_all_stock+0x30/0x150 [ 207.272094] [<ffffffff811853da>] mem_cgroup_reclaim+0xaa/0xe0 [ 207.272104] [<ffffffff8118775e>] __mem_cgroup_try_charge+0x51e/0xcf0 [ 207.272114] [<ffffffff81188486>] mem_cgroup_charge_common+0x36/0x60 [ 207.272125] [<ffffffff811884da>] mem_cgroup_newpage_charge+0x2a/0x30 [ 207.272135] [<ffffffff81150531>] do_wp_page+0x231/0x830 [ 207.272147] [<ffffffff8115151e>] handle_pte_fault+0x19e/0x8d0 [ 207.272157] [<ffffffff81151da8>] handle_mm_fault+0x158/0x1e0 [ 207.272166] [<ffffffff814b6153>] do_page_fault+0x2a3/0x4e0 [ 207.272178] [<ffffffff814b2578>] page_fault+0x28/0x30 [ 207.272189] [ 207.272189] -> #3 (&mm->mmap_sem){++++++}: [ 207.272199] [<ffffffff810ae329>] lock_acquire+0xe9/0x120 [ 207.272208] [<ffffffff8114c5ad>] might_fault+0x6d/0x90 [ 207.272218] [<ffffffff811a11e3>] filldir64+0xb3/0x120 [ 207.272229] [<ffffffffa013fc19>] call_filldir+0x89/0x130 [ext3] [ 207.272248] [<ffffffffa0140377>] ext3_readdir+0x6b7/0x7e0 [ext3] [ 207.272263] [<ffffffff811a1519>] vfs_readdir+0xa9/0xc0 [ 207.272273] [<ffffffff811a15cb>] sys_getdents64+0x9b/0x110 [ 207.272284] [<ffffffff814bb599>] system_call_fastpath+0x16/0x1b [ 207.272296] [ 207.272296] -> #2 (&type->i_mutex_dir_key#3){+.+.+.}: [ 207.272309] [<ffffffff810ae329>] lock_acquire+0xe9/0x120 [ 207.272319] [<ffffffff814ad807>] mutex_lock_nested+0x37/0x360 [ 207.272329] [<ffffffff8119c254>] link_path_walk+0x6f4/0x9a0 [ 207.272339] [<ffffffff8119e7fa>] path_openat+0xba/0x470 [ 207.272349] [<ffffffff8119ecf8>] do_filp_open+0x48/0xa0 [ 207.272358] [<ffffffff8118d81c>] file_open_name+0xdc/0x110 [ 207.272369] [<ffffffff8118d885>] filp_open+0x35/0x40 [ 207.272378] [<ffffffff8135c76e>] _request_firmware+0x52e/0xb20 [ 207.272389] [<ffffffff8135cdd6>] request_firmware+0x16/0x20 [ 207.272399] [<ffffffffa03bdb91>] request_microcode_fw+0x61/0xd0 [microcode] [ 207.272416] [<ffffffffa03bd554>] microcode_init_cpu+0x104/0x150 [microcode] [ 207.272431] [<ffffffffa03bd61c>] mc_device_add+0x7c/0xb0 [microcode] [ 207.272444] [<ffffffff8134a419>] subsys_interface_register+0xc9/0x100 [ 207.272457] [<ffffffffa04fc0f4>] 0xffffffffa04fc0f4 [ 207.272472] [<ffffffff81000202>] do_one_initcall+0x42/0x180 [ 207.272485] [<ffffffff810bbeff>] load_module+0x19df/0x1b70 [ 207.272499] [<ffffffff810bc376>] sys_init_module+0xe6/0x130 [ 207.272511] [<ffffffff814bb599>] system_call_fastpath+0x16/0x1b [ 207.272523] [ 207.272523] -> #1 (umhelper_sem){++++.+}: [ 207.272537] [<ffffffff810ae329>] lock_acquire+0xe9/0x120 [ 207.272548] [<ffffffff814ae9c4>] down_read+0x34/0x50 [ 207.272559] [<ffffffff81062bff>] usermodehelper_read_trylock+0x4f/0x100 [ 207.272575] [<ffffffff8135c7dd>] _request_firmware+0x59d/0xb20 [ 207.272587] [<ffffffff8135cdd6>] request_firmware+0x16/0x20 [ 207.272599] [<ffffffffa03bdb91>] request_microcode_fw+0x61/0xd0 [microcode] [ 207.272613] [<ffffffffa03bd554>] microcode_init_cpu+0x104/0x150 [microcode] [ 207.272627] [<ffffffffa03bd61c>] mc_device_add+0x7c/0xb0 [microcode] [ 207.272641] [<ffffffff8134a419>] subsys_interface_register+0xc9/0x100 [ 207.272654] [<ffffffffa04fc0f4>] 0xffffffffa04fc0f4 [ 207.272666] [<ffffffff81000202>] do_one_initcall+0x42/0x180 [ 207.272678] [<ffffffff810bbeff>] load_module+0x19df/0x1b70 [ 207.272690] [<ffffffff810bc376>] sys_init_module+0xe6/0x130 [ 207.272702] [<ffffffff814bb599>] system_call_fastpath+0x16/0x1b [ 207.272715] [ 207.272715] -> #0 (subsys mutex){+.+.+.}: [ 207.272729] [<ffffffff810ae002>] __lock_acquire+0x13b2/0x15f0 [ 207.272740] [<ffffffff810ae329>] lock_acquire+0xe9/0x120 [ 207.272751] [<ffffffff814ad807>] mutex_lock_nested+0x37/0x360 [ 207.272763] [<ffffffff8134af27>] bus_remove_device+0x37/0x1c0 [ 207.272775] [<ffffffff81349114>] device_del+0x134/0x1f0 [ 207.272786] [<ffffffff813491f2>] device_unregister+0x22/0x60 [ 207.272798] [<ffffffff814a24ea>] mce_cpu_callback+0x15e/0x1ad [ 207.272812] [<ffffffff814b6402>] notifier_call_chain+0x72/0x130 [ 207.272824] [<ffffffff81073d6e>] __raw_notifier_call_chain+0xe/0x10 [ 207.272839] [<ffffffff81498f76>] _cpu_down+0x1d6/0x350 [ 207.272851] [<ffffffff81499130>] cpu_down+0x40/0x60 [ 207.272862] [<ffffffff8149cc55>] store_online+0x75/0xe0 [ 207.272874] [<ffffffff813474a0>] dev_attr_store+0x20/0x30 [ 207.272886] [<ffffffff812090d9>] sysfs_write_file+0xd9/0x150 [ 207.272900] [<ffffffff8118e10b>] vfs_write+0xcb/0x130 [ 207.272911] [<ffffffff8118e924>] sys_write+0x64/0xa0 [ 207.272923] [<ffffffff814bb599>] system_call_fastpath+0x16/0x1b [ 207.272936] [ 207.272936] other info that might help us debug this: [ 207.272936] [ 207.272952] Chain exists of: [ 207.272952] subsys mutex --> &mm->mmap_sem --> cpu_hotplug.lock [ 207.272952] [ 207.272973] Possible unsafe locking scenario: [ 207.272973] [ 207.272984] CPU0 CPU1 [ 207.272992] ---- ---- [ 207.273000] lock(cpu_hotplug.lock); [ 207.273009] lock(&mm->mmap_sem); [ 207.273020] lock(cpu_hotplug.lock); [ 207.273031] lock(subsys mutex); [ 207.273040] [ 207.273040] *** DEADLOCK *** [ 207.273040] [ 207.273055] 5 locks held by bash/10493: [ 207.273062] #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff81209049>] sysfs_write_file+0x49/0x150 [ 207.273080] #1: (s_active#150){.+.+.+}, at: [<ffffffff812090c2>] sysfs_write_file+0xc2/0x150 [ 207.273099] #2: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81027557>] cpu_hotplug_driver_lock+0x17/0x20 [ 207.273121] #3: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff8149911c>] cpu_down+0x2c/0x60 [ 207.273140] #4: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81046ccf>] cpu_hotplug_begin+0x2f/0x60 [ 207.273158] [ 207.273158] stack backtrace: [ 207.273170] Pid: 10493, comm: bash Not tainted 3.9.0-rc1-0.7-default+ #34 [ 207.273180] Call Trace: [ 207.273192] [<ffffffff810ab373>] print_circular_bug+0x223/0x310 [ 207.273204] [<ffffffff810ae002>] __lock_acquire+0x13b2/0x15f0 [ 207.273216] [<ffffffff812086b0>] ? sysfs_hash_and_remove+0x60/0xc0 [ 207.273227] [<ffffffff810ae329>] lock_acquire+0xe9/0x120 [ 207.273239] [<ffffffff8134af27>] ? bus_remove_device+0x37/0x1c0 [ 207.273251] [<ffffffff814ad807>] mutex_lock_nested+0x37/0x360 [ 207.273263] [<ffffffff8134af27>] ? bus_remove_device+0x37/0x1c0 [ 207.273274] [<ffffffff812086b0>] ? sysfs_hash_and_remove+0x60/0xc0 [ 207.273286] [<ffffffff8134af27>] bus_remove_device+0x37/0x1c0 [ 207.273298] [<ffffffff81349114>] device_del+0x134/0x1f0 [ 207.273309] [<ffffffff813491f2>] device_unregister+0x22/0x60 [ 207.273321] [<ffffffff814a24ea>] mce_cpu_callback+0x15e/0x1ad [ 207.273332] [<ffffffff814b6402>] notifier_call_chain+0x72/0x130 [ 207.273344] [<ffffffff81073d6e>] __raw_notifier_call_chain+0xe/0x10 [ 207.273356] [<ffffffff81498f76>] _cpu_down+0x1d6/0x350 [ 207.273368] [<ffffffff81027557>] ? cpu_hotplug_driver_lock+0x17/0x20 [ 207.273380] [<ffffffff81499130>] cpu_down+0x40/0x60 [ 207.273391] [<ffffffff8149cc55>] store_online+0x75/0xe0 [ 207.273402] [<ffffffff813474a0>] dev_attr_store+0x20/0x30 [ 207.273413] [<ffffffff812090d9>] sysfs_write_file+0xd9/0x150 [ 207.273425] [<ffffffff8118e10b>] vfs_write+0xcb/0x130 [ 207.273436] [<ffffffff8118e924>] sys_write+0x64/0xa0 [ 207.273447] [<ffffffff814bb599>] system_call_fastpath+0x16/0x1b Which reports a false possitive deadlock because it sees: 1) load_module -> subsys_interface_register -> mc_deveice_add (*) -> subsys->p->mutex -> link_path_walk -> lookup_slow -> i_mutex 2) sys_write -> _cpu_down -> cpu_hotplug_begin -> cpu_hotplug.lock -> mce_cpu_callback -> mce_device_remove(**) -> device_unregister -> bus_remove_device -> subsys mutex 3) vfs_readdir -> i_mutex -> filldir64 -> might_fault -> might_lock_read(mmap_sem) -> page_fault -> mmap_sem -> drain_all_stock -> cpu_hotplug.lock but 1) takes cpu_subsys subsys (*) but 2) takes mce_device subsys (**) so the deadlock is not possible AFAICS. The fix is quite simple. We can pull the key inside bus_type structure because they are defined per device so the pointer will be unique as well. bus_register doesn't need to be a macro anymore so change it to the inline. We could get rid of __bus_register as there is no other caller but maybe somebody will want to use a different key so keep it around for now. Reported-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12driver/base: implement subsys_virtual_register()Tejun Heo
Kay tells me the most appropriate place to expose workqueues to userland would be /sys/devices/virtual/workqueues/WQ_NAME which is symlinked to /sys/bus/workqueue/devices/WQ_NAME and that we're lacking a way to do that outside of driver core as virtual_device_parent() isn't exported and there's no inteface to conveniently create a virtual subsystem. This patch implements subsys_virtual_register() by factoring out subsys_register() from subsys_system_register() and using it with virtual_device_parent() as the origin directory. It's identical to subsys_system_register() other than the origin directory but we aren't gonna restrict the device names which should be used under it. This will be used to expose workqueue attributes to userland. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kay Sievers <kay.sievers@vrfy.org>
2013-02-25devres: allow adding custom actions to the stackDmitry Torokhov
Sometimes drivers need to execute one-off actions in their error handling or device teardown paths. An example would be toggling a GPIO line to reset the controlled device into predefined state. To allow performing such actions when using managed resources let's allow adding them to stack/group of devres resources. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-06driver-core: constify data for class_find_device()Michał Mirosław
All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-23drivers/pinctrl: grab default handles from device coreLinus Walleij
This makes the device core auto-grab the pinctrl handle and set the "default" (PINCTRL_STATE_DEFAULT) state for every device that is present in the device model right before probe. This will account for the lion's share of embedded silicon devcies. A modification of the semantics for pinctrl_get() is also done: previously if the pinctrl handle for a certain device was already taken, the pinctrl core would return an error. Now, since the core may have already default-grabbed the handle and set its state to "default", if the handle was already taken, this will be disregarded and the located, previously instanitated handle will be returned to the caller. This way all code in drivers explicitly requesting their pinctrl handlers will still be functional, and drivers that want to explicitly retrieve and switch their handles can still do that. But if the desired functionality is just boilerplate of this type in the probe() function: struct pinctrl *p; p = devm_pinctrl_get_select_default(&dev); if (IS_ERR(p)) { if (PTR_ERR(p) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_warn(&dev, "no pinctrl handle\n"); } The discussion began with the addition of such boilerplate to the omap4 keypad driver: http://marc.info/?l=linux-input&m=135091157719300&w=2 A previous approach using notifiers was discussed: http://marc.info/?l=linux-kernel&m=135263661110528&w=2 This failed because it could not handle deferred probes. This patch alone does not solve the entire dilemma faced: whether code should be distributed into the drivers or if it should be centralized to e.g. a PM domain. But it solves the immediate issue of the addition of boilerplate to a lot of drivers that just want to grab the default state. As mentioned, they can later explicitly retrieve the handle and set different states, and this could as well be done by e.g. PM domains as it is only related to a certain struct device * pointer. ChangeLog v4->v5 (Stephen): - Simplified the devicecore grab code. - Deleted a piece of documentation recommending that pins be mapped to a device rather than hogged. ChangeLog v3->v4 (Linus): - Drop overzealous NULL checks. - Move kref initialization to pinctrl_create(). - Seeking Tested-by from Stephen Warren so we do not disturb the Tegra platform. - Seeking ACK on this from Greg (and others who like it) so I can merge it through the pinctrl subsystem. ChangeLog v2->v3 (Linus): - Abstain from using IS_ERR_OR_NULL() in the driver core, Russell recently sent a patch to remove it. Handle the NULL case explicitly even though it's a bogus case. - Make sure we handle probe deferral correctly in the device core file. devm_kfree() the container on error so we don't waste memory for devices without pinctrl handles. - Introduce reference counting into the pinctrl core using <linux/kref.h> so that we don't release pinctrl handles that have been obtained for two or more places. ChangeLog v1->v2 (Linus): - Only store a pointer in the device struct, and only allocate this if it's really used by the device. Cc: Felipe Balbi <balbi@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Mitch Bradley <wmb@firmworks.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Rickard Andersson <rickard.andersson@stericsson.com> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [swarren: fixed and simplified error-handling in pinctrl_bind_pins(), to correctly handle deferred probe. Removed admonition from docs not to use pinctrl hogs for devices] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-22lib: devres: Introduce devm_ioremap_resource()Thierry Reding
The devm_request_and_ioremap() function is very useful and helps avoid a whole lot of boilerplate. However, one issue that keeps popping up is its lack of a specific error code to determine which of the steps that it performs failed. Furthermore, while the function gives an example and suggests what error code to return on failure, a wide variety of error codes are used throughout the tree. In an attempt to fix these problems, this patch adds a new function that drivers can transition to. The devm_ioremap_resource() returns a pointer to the remapped I/O memory on success or an ERR_PTR() encoded error code on failure. Callers can check for failure using IS_ERR() and determine its cause by extracting the error code using PTR_ERR(). devm_request_and_ioremap() is implemented as a wrapper around the new API and return NULL on failure as before. This ensures that backwards compatibility is maintained until all users have been converted to the new API, at which point the old devm_request_and_ioremap() function should be removed. A semantic patch is included which can be used to convert from the old devm_request_and_ioremap() API to the new devm_ioremap_resource() API. Some non-trivial cases may require manual intervention, though. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-14Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS update from Ingo Molnar: "Rework all config variables used throughout the MCA code and collect them together into a mca_config struct. This keeps them tightly and neatly packed together instead of spilled all over the place. Then, convert those which are used as booleans into real booleans and save some space. These bits are exposed via /sys/devices/system/machinecheck/machinecheck*/" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, MCA: Finish mca_config conversion x86, MCA: Convert the next three variables batch x86, MCA: Convert rip_msr, mce_bootlog, monarch_timeout x86, MCA: Convert dont_log_ce, banks and tolerant drivers/base: Add a DEVICE_BOOL_ATTR macro
2012-11-21ACPI / driver core: Introduce struct acpi_dev_node and related macrosRafael J. Wysocki
To avoid adding an ACPI handle pointer to struct device on architectures that don't use ACPI, or generally when CONFIG_ACPI is not set, in which cases that pointer is useless, define struct acpi_dev_node that will contain the handle pointer if CONFIG_ACPI is set and will be empty otherwise and use it to represent the ACPI device node field in struct device. In addition to that define macros for reading and setting the ACPI handle of a device that don't generate code when CONFIG_ACPI is unset. Modify the ACPI subsystem to use those macros instead of referring to the given device's ACPI handle directly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15driver core / ACPI: Move ACPI support to core device and driver typesMika Westerberg
With ACPI 5 we are starting to see devices that don't natively support discovery but can be enumerated with the help of the ACPI namespace. Typically, these devices can be represented in the Linux device driver model as platform devices or some serial bus devices, like SPI or I2C devices. Since we want to re-use existing drivers for those devices, we need a way for drivers to specify the ACPI IDs of supported devices, so that they can be matched against device nodes in the ACPI namespace. To this end, it is sufficient to add a pointer to an array of supported ACPI device IDs, that can be provided by the driver, to struct device. Moreover, things like ACPI power management need to have access to the ACPI handle of each supported device, because that handle is used to invoke AML methods associated with the corresponding ACPI device node. The ACPI handles of devices are now stored in the archdata member structure of struct device whose definition depends on the architecture and includes the ACPI handle only on x86 and ia64. Since the pointer to an array of supported ACPI IDs is added to struct device_driver in an architecture-independent way, it is logical to move the ACPI handle from archdata to struct device itself at the same time. This also makes code more straightforward in some places and follows the example of Device Trees that have a poiter to struct device_node in there too. This changeset is based on Mika Westerberg's work. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-26drivers/base: Add a DEVICE_BOOL_ATTR macroBorislav Petkov
... which, analogous to DEVICE_INT_ATTR provides functionality to set/clear bools. Its purpose is to be used where values need to be used as booleans in configuration context. Next patch uses this. Signed-off-by: Borislav Petkov <bp@alien8.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Luck <tony.luck@intel.com>
2012-10-02Merge tag 'pm-for-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael J Wysocki: - Improved system suspend/resume and runtime PM handling for the SH TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile). - Generic PM domains framework extensions related to cpuidle support and domain objects lookup using names. - ARM/shmobile power management updates including improved support for the SH7372's A4S power domain containing the CPU core. - cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre Przywara and Borislav Petkov. - cpu0 cpufreq driver from Shawn Guo. - cpufreq governor fixes related to the relaxing of limit from Michal Pecio. - OMAP cpufreq updates from Axel Lin and Richard Zhao. - cpuidle ladder governor fixes related to the disabling of states from Carsten Emde and me. - Runtime PM core updates related to the interactions with the system suspend core from Alan Stern and Kevin Hilman. - Wakeup sources modification allowing more helper functions to be called from interrupt context from John Stultz and additional diagnostic code from Todd Poynor. - System suspend error code path fix from Feng Hong. Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the workqueue fixes conflicting fairly badly with the removal of support for hardware P-state chips. The changes were independent but somewhat intertwined. * tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code" PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 cpuidle: rename function name "__cpuidle_register_driver", v2 cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name cpuidle: remove some empty lines PM: Prevent runtime suspend during system resume PM QoS: Use spinlock in the per-device PM QoS constraints code PM / Sleep: use resume event when call dpm_resume_early cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure ACPI / processor: remove pointless variable initialization ACPI / processor: remove unused function parameter cpufreq: OMAP: remove loops_per_jiffy recalculate for smp sections: fix section conflicts in drivers/cpufreq cpufreq: conservative: update frequency when limits are relaxed cpufreq / ondemand: update frequency when limits are relaxed properly __init-annotate pm_sysrq_init() cpufreq: Add a generic cpufreq-cpu0 driver PM / OPP: Initialize OPP table from device tree ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp cpufreq: Remove support for hardware P-state chips from powernow-k8 ...
2012-09-26device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emitJoe Perches
Also add __printf() verification for format string. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emitJoe Perches
Convert direct calls of vprintk_emit and printk_emit to the dev_ equivalents. Make create_syslog_header static. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17dev: Add dev_vprintk_emit and dev_printk_emitJoe Perches
Add utility functions to consolidate the use of create_syslog_header and vprintk_emit. This allows conversion of logging functions that call create_syslog_header and then call vprintk_emit or printk_emit to the dev_ equivalents. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17dev_dbg/dynamic_debug: Update to use printk_emit, optimize stackJoe Perches
commit c4e00daaa9 ("driver-core: extend dev_printk() to pass structured data") changed __dev_printk and broke dynamic-debug's ability to control the dynamic prefix of dev_dbg(dev,..). commit af7f2158fd ("drivers-core: make structured logging play nice with dynamic-debug") made a minimal correction. The current dynamic debug code uses up to 3 recursion levels via %pV. This can consume quite a bit of stack. Directly call printk_emit to reduce the recursion depth. These changes include: dev_dbg: o Create and use function create_syslog_header to format the syslog header for printk_emit uses. o Call create_syslog_header and neaten __dev_printk o Make __dev_printk static not global o Remove include header declaration of __dev_printk o Remove now unused EXPORT_SYMBOL() of __dev_printk o Whitespace neatening dynamic_dev_dbg: o Remove KERN_DEBUG from dynamic_emit_prefix o Call create_syslog_header and printk_emit o Whitespace neatening Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10driver-core: Shut up dev_dbg_reatelimited() without DEBUGHiroshi Doyu
dev_dbg_reatelimited() without DEBUG printed "217078 callbacks suppressed". This shouldn't print anything without DEBUG. With CONFIG_DYNAMIC_DEBUG, the print should be configured as expected. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Reported-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Antti Palosaari <crope@iki.fi> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-04PM: Do not use the syscore flag for runtime PMRafael J. Wysocki
The syscore device PM flag used to mark the devices (belonging to PM domains) that should never be turned off, except for the system core (syscore) suspend/hibernation and resume stages, need not be accessed by the runtime PM core functions, because all of the devices it is set for need to be marked as "irq safe" anyway and are protected from being turned off by runtime PM by ensuring that their usage counters are always set. For this reason, make the syscore flag system-wide PM-specific and simplify the code used for manipulating it, because it need not acquire the device's power.lock any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-16driver core: devres: introduce devres_for_each_resMing Lei
This patch introduces one devres API of devres_for_each_res so that the device's driver can iterate each resource it has interest in. The firmware loader will use the API to get each firmware name from the device instance. Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26Merge tag 'driver-core-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg Kroah-Hartman: "Here's the big driver core pull request for 3.6-rc1. Unlike 3.5, this kernel should be a lot tamer, with the printk changes now settled down. All we have here is some extcon driver updates, w1 driver updates, a few printk cleanups that weren't needed for 3.5, but are good to have now, and some other minor fixes/changes in the driver core. All of these have been in the linux-next releases for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits) printk: Export struct log size and member offsets through vmcoreinfo Drivers: hv: Change the hex constant to a decimal constant driver core: don't trigger uevent after failure extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device sysfs: fail dentry revalidation after namespace change fix sysfs: fail dentry revalidation after namespace change extcon: spelling of detach in function doc extcon: arizona: Stop microphone detection if we give up on it extcon: arizona: Update cable reporting calls and split headset PM / Runtime: Do not increment device usage counts before probing kmsg - do not flush partial lines when the console is busy kmsg - export "continuation record" flag to /dev/kmsg kmsg - avoid warning for CONFIG_PRINTK=n compilations kmsg - properly print over-long continuation lines driver-core: Use kobj_to_dev instead of re-implementing it driver-core: Move kobj_to_dev from genhd.h to device.h driver core: Move deferred devices to the end of dpm_list before probing driver core: move uevent call to driver_register driver core: fix shutdown races with probe/remove(v3) Extcon: Arizona: Add driver for Wolfson Arizona class devices ...
2012-07-23Merge branches 'iommu/fixes', 'x86/amd', 'groups', 'arm/tegra' and ↵Joerg Roedel
'api/domain-attr' into next Conflicts: drivers/iommu/iommu.c include/linux/iommu.h
2012-07-18Make wait_for_device_probe() also do scsi_complete_async_scans()Linus Torvalds
Commit a7a20d103994 ("sd: limit the scope of the async probe domain") make the SCSI device probing run device discovery in it's own async domain. However, as a result, the partition detection was no longer synchronized by async_synchronize_full() (which, despite the name, only synchronizes the global async space, not all of them). Which in turn meant that "wait_for_device_probe()" would not wait for the SCSI partitions to be parsed. And "wait_for_device_probe()" was what the boot time init code relied on for mounting the root filesystem. Now, most people never noticed this, because not only is it timing-dependent, but modern distributions all use initrd. So the root filesystem isn't actually on a disk at all. And then before they actually mount the final disk filesystem, they will have loaded the scsi-wait-scan module, which not only does the expected wait_for_device_probe(), but also does scsi_complete_async_scans(). [ Side note: scsi_complete_async_scans() had also been partially broken, but that was fixed in commit 43a8d39d0137 ("fix async probe regression"), so that same commit a7a20d103994 had actually broken setups even if you used scsi-wait-scan explicitly ] Solve this problem by just moving the scsi_complete_async_scans() call into wait_for_device_probe(). Everybody who wants to wait for device probing to finish really wants the SCSI probing to complete, so there's no reason not to do this. So now "wait_for_device_probe()" really does what the name implies, and properly waits for device probing to finish. This also removes the now unnecessary extra calls to scsi_complete_async_scans(). Reported-and-tested-by: Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <jbottomley@parallels.com> Cc: Borislav Petkov <bp@amd64.org> Cc: linux-scsi <linux-scsi@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-16driver-core: Move kobj_to_dev from genhd.h to device.hLars-Peter Clausen
This function is not really specific to the genhd layer and there are various re-implementations or open-coded variants of it all throughout the kernel. To avoid further duplications move the function to a more generic place. While moving also convert it from a macro to a inline function. Potential users of this function can be detected and converted using the following coccinelle patch: // <smpl> @@ expression k; @@ -container_of(k, struct device, kobj) +kobj_to_dev(kobj) // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-25driver core: Add iommu_group tracking to struct deviceAlex Williamson
IOMMU groups allow IOMMU drivers to represent DMA visibility and isolation of devices. Multiple devices may be grouped together for the purposes of DMA. Placing a pointer on struct device enable easy access for things like streaming DMA programming and drivers like VFIO. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-05-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and ARM DMA-mapping updates from Marek Szyprowski: "These patches contain two major updates for DMA mapping subsystem (mainly for ARM architecture). First one is Contiguous Memory Allocator (CMA) which makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted. The main difference from the similar frameworks is the fact that CMA allows to transparently reuse the memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework migrates system pages to create space for the required big chunk of physically contiguous memory. For more information one can refer to nice LWN articles: - 'A reworked contiguous memory allocator': http://lwn.net/Articles/447405/ - 'CMA and ARM': http://lwn.net/Articles/450286/ - 'A deep dive into CMA': http://lwn.net/Articles/486301/ - and the following thread with the patches and links to all previous versions: https://lkml.org/lkml/2012/4/3/204 The main client for this new framework is ARM DMA-mapping subsystem. The second part provides a complete redesign in ARM DMA-mapping subsystem. The core implementation has been changed to use common struct dma_map_ops based infrastructure with the recent updates for new dma attributes merged in v3.4-rc2. This allows to use more than one implementation of dma-mapping calls and change/select them on the struct device basis. The first client of this new infractructure is dmabounce implementation which has been completely cut out of the core, common code. The last patch of this redesign update introduces a new, experimental implementation of dma-mapping calls on top of generic IOMMU framework. This lets ARM sub-platform to transparently use IOMMU for DMA-mapping calls if one provides required IOMMU hardware. For more information please refer to the following thread: http://www.spinics.net/lists/arm-kernel/msg175729.html The last patch merges changes from both updates and provides a resolution for the conflicts which cannot be avoided when patches have been applied on the same files (mainly arch/arm/mm/dma-mapping.c)." Acked by Andrew Morton <akpm@linux-foundation.org>: "Yup, this one please. It's had much work, plenty of review and I think even Russell is happy with it." * 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: (28 commits) ARM: dma-mapping: use PMD size for section unmap cma: fix migration mode ARM: integrate CMA with DMA-mapping subsystem X86: integrate CMA with DMA-mapping subsystem drivers: add Contiguous Memory Allocator mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks mm: extract reclaim code from __alloc_pages_direct_reclaim() mm: Serialize access to min_free_kbytes mm: page_isolation: MIGRATE_CMA isolation functions added mm: mmzone: MIGRATE_CMA migration type added mm: page_alloc: change fallbacks array handling mm: page_alloc: introduce alloc_contig_range() mm: compaction: export some of the functions mm: compaction: introduce isolate_freepages_range() mm: compaction: introduce map_pages() mm: compaction: introduce isolate_migratepages_range() mm: page_alloc: remove trailing whitespace ARM: dma-mapping: add support for IOMMU mapper ARM: dma-mapping: use alloc, mmap, free from dma_ops ARM: dma-mapping: remove redundant code and do the cleanup ... Conflicts: arch/x86/include/asm/dma-mapping.h
2012-05-21drivers: add Contiguous Memory AllocatorMarek Szyprowski
The Contiguous Memory Allocator is a set of helper functions for DMA mapping framework that improves allocations of contiguous memory chunks. CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type and gives back to the system. Kernel is allowed to allocate only movable pages within CMA's managed memory so that it can be used for example for page cache when DMA mapping do not use it. On dma_alloc_from_contiguous() request such pages are migrated out of CMA area to free required contiguous block and fulfill the request. This allows to allocate large contiguous chunks of memory at any time assuming that there is enough free memory available in the system. This code is heavily based on earlier works by Michal Nazarewicz. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Rob Clark <rob.clark@linaro.org> Tested-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Barry Song <Baohua.Song@csr.com>
2012-05-14sysfs: get rid of some lockdep false positivesAlan Stern
This patch (as1554) fixes a lockdep false-positive report. The problem arises because lockdep is unable to deal with the tree-structured locks created by the device core and sysfs. This particular problem involves a sysfs attribute method that unregisters itself, not from the device it was called for, but from a descendant device. Lockdep doesn't understand the distinction and reports a possible deadlock, even though the operation is safe. This is the sort of thing that would normally be handled by using a nested lock annotation; unfortunately it's not feasible to do that here. There's no sensible way to tell sysfs when attribute removal occurs in the context of a parent attribute method. As a workaround, the patch adds a new flag to struct attribute telling sysfs not to inform lockdep when it acquires a readlock on a sysfs_dirent instance for the attribute. The readlock is still acquired, but lockdep doesn't know about it and hence does not complain about impossible deadlock scenarios. Also added are macros for static initialization of attribute structures with the ignore_lockdep flag set. The three offending attributes in the USB subsystem are converted to use the new macros. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Tejun Heo <tj@kernel.org> CC: Eric W. Biederman <ebiederm@xmission.com> CC: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14driver core: Add dev_*_ratelimited() familyHiroshi DOYU
Add dev_*_ratelimited() family, dev_* version of pr_*_ratelimited(). Using Joe Perches's proposal/implementation. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04devres: Add devres_release()Mark Brown
APIs using devres frequently want to implement a "remove and free the resource" operation so it seems sensible that they should be able to just have devres do the freeing for them since that's a big part of what devres is all about. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04driver-core: fix DEVICE_INT_ATTR to use correct show/store functionsMichael Davidson
DEVICE_INT_ATTR() should use device_show_int() and device_store_int() not device_show_ulong() and device_store_ulong() Signed-off-by: Michael Davidson <md@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19Revert "driver core: check start node in klist_iter_init_node"Greg Kroah-Hartman
This reverts commit a15d49fd3094cff90e5410ca454a870e0a722fe1 as that patch broke the build. Cc: Hannes Reinecke <hare@suse.de> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18driver core: check start node in klist_iter_init_nodeHannes Reinecke
klist_iter_init_node() takes a node as a start argument. However, this node might not be valid anymore. This patch updates the klist_iter_init_node() and dependent functions to return an error if so. All calling functions have been audited to check for a return code here. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Greg Kroah-Hartmann <gregkh@linuxfoundation.org> Cc: Kay Sievers <kay@vrfy.org> Cc: Stable Kernel <stable@kernel.org> Cc: Linux Kernel <linux-kernel@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc merge from Benjamin Herrenschmidt: "Here's the powerpc batch for this merge window. It is going to be a bit more nasty than usual as in touching things outside of arch/powerpc mostly due to the big iSeriesectomy :-) We finally got rid of the bugger (legacy iSeries support) which was a PITA to maintain and that nobody really used anymore. Here are some of the highlights: - Legacy iSeries is gone. Thanks Stephen ! There's still some bits and pieces remaining if you do a grep -ir series arch/powerpc but they are harmless and will be removed in the next few weeks hopefully. - The 'fadump' functionality (Firmware Assisted Dump) replaces the previous (equivalent) "pHyp assisted dump"... it's a rewrite of a mechanism to get the hypervisor to do crash dumps on pSeries, the new implementation hopefully being much more reliable. Thanks Mahesh Salgaonkar. - The "EEH" code (pSeries PCI error handling & recovery) got a big spring cleaning, motivated by the need to be able to implement a new backend for it on top of some new different type of firwmare. The work isn't complete yet, but a good chunk of the cleanups is there. Note that this adds a field to struct device_node which is not very nice and which Grant objects to. I will have a patch soon that moves that to a powerpc private data structure (hopefully before rc1) and we'll improve things further later on (hopefully getting rid of the need for that pointer completely). Thanks Gavin Shan. - I dug into our exception & interrupt handling code to improve the way we do lazy interrupt handling (and make it work properly with "edge" triggered interrupt sources), and while at it found & fixed a wagon of issues in those areas, including adding support for page fault retry & fatal signals on page faults. - Your usual random batch of small fixes & updates, including a bunch of new embedded boards, both Freescale and APM based ones, etc..." I fixed up some conflicts with the generalized irq-domain changes from Grant Likely, hopefully correctly. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits) powerpc/ps3: Do not adjust the wrapper load address powerpc: Remove the rest of the legacy iSeries include files powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces init: Remove CONFIG_PPC_ISERIES powerpc: Remove FW_FEATURE ISERIES from arch code tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable powerpc/spufs: Fix double unlocks powerpc/5200: convert mpc5200 to use of_platform_populate() powerpc/mpc5200: add options to mpc5200_defconfig powerpc/mpc52xx: add a4m072 board support powerpc/mpc5200: update mpc5200_defconfig to fit for charon board Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board MAINTAINERS: Update PowerPC 4xx tree powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board powerpc: document the FSL MPIC message register binding powerpc: add support for MPIC message register API powerpc/fsl: Added aliased MSIIR register address to MSI node in dts powerpc/85xx: mpc8548cds - add 36-bit dts ...
2012-03-20Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds
Pull USB merge for 3.4-rc1 from Greg KH: "Here's the big USB merge for the 3.4-rc1 merge window. Lots of gadget driver reworks here, driver updates, xhci changes, some new drivers added, usb-serial core reworking to fix some bugs, and other various minor things. There are some patches touching arch code, but they have all been acked by the various arch maintainers." * tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits) net: qmi_wwan: add support for ZTE MF820D USB: option: add ZTE MF820D usb: gadget: f_fs: Remove lock is held before freeing checks USB: option: make interface blacklist work again usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls USB: use generic platform driver on ath79 USB: EHCI: Add a generic platform device driver USB: OHCI: Add a generic platform device driver USB: ftdi_sio: new PID: LUMEL PD12 USB: ftdi_sio: add support for FT-X series devices USB: serial: mos7840: Fixed MCS7820 device attach problem usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT. usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH USB: ohci-nxp: Remove i2c_write(), use smbus USB: ohci-nxp: Support for LPC32xx USB: ohci-nxp: Rename symbols from pnx4008 to nxp USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp usb: gadget: Kconfig: fix typo for 'different' usb: dwc3: pci: fix another failure path in dwc3_pci_probe() ...
2012-03-09driver-core: Allow additional parameters for module_driverLars-Peter Clausen
Allow module_driver take additional parameters which will be passed to the register and unregister function calls. This allows it to be used in cases where additional parameters are required (e.g. usb_serial_register_drivers). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09driver-core: remove legacy iSeries hackStephen Rothwell
The PowerPC legacy iSeries plateform is being removed along with the "one looney iseries driver", so this code can now be removed as well. cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-08driver core: move the deferred probe pointer into the private areaGreg Kroah-Hartman
Nothing outside of the driver core needs to get to the deferred probe pointer, so move it inside the private area of 'struct device' so no one tries to mess around with it. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08drivercore: Add driver probe deferral mechanismGrant Likely
Allow drivers to report at probe time that they cannot get all the resources required by the device, and should be retried at a later time. This should completely solve the problem of getting devices initialized in the right order. Right now this is mostly handled by mucking about with initcall ordering which is a complete hack, and doesn't even remotely handle the case where device drivers are in modules. This approach completely sidesteps the issues by allowing driver registration to occur in any order, and any driver can request to be retried after a few more other drivers get probed. v4: - Integrate Manjunath's addition of a separate workqueue - Change -EAGAIN to -EPROBE_DEFER for drivers to trigger deferral - Update comment blocks to reflect how the code really works v3: - Hold off workqueue scheduling until late_initcall so that the bulk of driver probes are complete before we start retrying deferred devices. - Tested with simple use cases. Still needs more testing though. Using it to get rid of the gpio early_initcall madness, or to replace the ASoC internal probe deferral code would be ideal. v2: - added locking so it should no longer be utterly broken in that regard - remove device from deferred list at device_del time. - Still completely untested with any real use case, but has been boot tested. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dilan Lee <dilee@nvidia.com> Cc: Manjunath GKondaiah <manjunath.gkondaiah@linaro.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Tony Lindgren <tony@atomide.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02Merge 3.3-rc2 into the driver-core-next branch.Greg Kroah-Hartman
This was done to resolve a merge and build problem with the drivers/acpi/processor_driver.c file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-24Eliminate get_driver() and put_driver()Alan Stern
Now that there are no users of get_driver() or put_driver(), this patch (as1513) removes those routines completely. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: make dynamic-debug supersede DEBUG ccflagJim Cromie
If CONFIG_DYNAMIC_DEBUG is defined, honor it over DEBUG, so that pr_debug()s are controllable, instead of always-on. When DEBUG is also defined, change _DPRINTK_FLAGS_DEFAULT to enable printing by default. Also adding _DPRINTK_FLAGS_INCL_MODNAME would be nice, but there are numerous cases of pr_debug(NAME ": ...), which would result in double printing of module-name. So defer this until things settle. Cc: David Miller <davem@davemloft.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-23kernel-doc: fix new warnings in device.hRandy Dunlap
Fix new kernel-doc warnings: Warning(include/linux/device.h:299): No description found for parameter 'name' Warning(include/linux/device.h:299): No description found for parameter 'subsys' Warning(include/linux/device.h:299): No description found for parameter 'node' Warning(include/linux/device.h:299): No description found for parameter 'add_dev' Warning(include/linux/device.h:299): No description found for parameter 'remove_dev' Warning(include/linux/device.h:685): No description found for parameter 'id' Warning(include/linux/device.h:1009): No description found for parameter '__driver' Warning(include/linux/device.h:1009): No description found for parameter '__register' Warning(include/linux/device.h:1009): No description found for parameter '__unregister' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04driver core: remove __must_check from device_create_fileGreg Kroah-Hartman
With the conversion of the sysdev to a real struct device, more drivers are calling device_create_file, and some of them don't check the return value, which isn't wise. But as they happen to be in parts of the kernel where a warning is considered an error (i.e. powerpc), this breaks the build. So for now, remove the marking on the function, which fixes the build problems. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 19:32:58 +0000