summaryrefslogtreecommitdiff
path: root/include/linux/ftrace.h
AgeCommit message (Collapse)Author
2012-02-21ftrace, perf: Add filter support for function trace eventJiri Olsa
Adding support to filter function trace event via perf interface. It is now possible to use filter interface in the perf tool like: perf record -e ftrace:function --filter="(ip == mm_*)" ls The filter syntax is restricted to the the 'ip' field only, and following operators are accepted '==' '!=' '||', ending up with the filter strings like: ip == f1[, ]f2 ... || ip != f3[, ]f4 ... with comma ',' or space ' ' as a function separator. If the space ' ' is used as a separator, the right side of the assignment needs to be enclosed in double quotes '"', e.g.: perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls The '==' operator adds trace filter with same effect as would be added via set_ftrace_filter file. The '!=' operator adds trace filter with same effect as would be added via set_ftrace_notrace file. The right side of the '!=', '==' operators is list of functions or regexp. to be added to filter separated by space. The '||' operator is used for connecting multiple filter definitions together. It is possible to have more than one '==' and '!=' operators within one filter string. Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21ftrace: Add enable/disable ftrace_ops control interfaceJiri Olsa
Adding a way to temporarily enable/disable ftrace_ops. The change follows the same way as 'global' ftrace_ops are done. Introducing 2 global ftrace_ops - control_ops and ftrace_control_list which take over all ftrace_ops registered with FTRACE_OPS_FL_CONTROL flag. In addition new per cpu flag called 'disabled' is also added to ftrace_ops to provide the control information for each cpu. When ftrace_ops with FTRACE_OPS_FL_CONTROL is registered, it is set as disabled for all cpus. The ftrace_control_list contains all the registered 'control' ftrace_ops. The control_ops provides function which iterates ftrace_control_list and does the check for 'disabled' flag on current cpu. Adding 3 inline functions: ftrace_function_local_disable/ftrace_function_local_enable - enable/disable the ftrace_ops on current cpu ftrace_function_local_disabled - get disabled ftrace_ops::disabled value for current cpu Link: http://lkml.kernel.org/r/1329317514-8131-2-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03ftrace: Change filter/notrace set functions to return exit codeJiri Olsa
Currently the ftrace_set_filter and ftrace_set_notrace functions do not return any return code. So there's no way for ftrace_ops user to tell wether the filter was correctly applied. The set_ftrace_filter interface returns error in case the filter did not match: # echo krava > set_ftrace_filter bash: echo: write error: Invalid argument Changing both ftrace_set_filter and ftrace_set_notrace functions to return zero if the filter was applied correctly or -E* values in case of error. Link: http://lkml.kernel.org/r/1325495060-6402-2-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-07tracing: Fix compile error when static ftrace is enabledSteven Rostedt
The stack tracer uses the call ftrace_set_early_filter() function to allow the stack tracer to pick its own functions on boot. But this function is not defined if dynamic ftrace is not set. This causes a compiler error when stack tracer is enabled and dynamic ftrace is not. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21ftrace: Allow access to the boot time function enablingSteven Rostedt
Change set_ftrace_early_filter() to ftrace_set_early_filter() and make it a global function. This will allow other subsystems in the kernel to be able to enable function tracing at start up and reuse the ftrace function parsing code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21ftrace: Decouple hash items from showing filtered functionsSteven Rostedt
The set_ftrace_filter shows "hashed" functions, which are functions that are added with operations to them (like traceon and traceoff). As other subsystems may be able to show what functions they are using for function tracing, the hash items should no longer be shown just because the FILTER flag is set. As they have nothing to do with other subsystems filters. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21ftrace: Allow other users of function tracing to use the output listingSteven Rostedt
The function tracer is set up to allow any other subsystem (like perf) to use it. Ftrace already has a way to list what functions are enabled by the global_ops. It would be very helpful to let other users of the function tracer to be able to use the same code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21ftrace: Replace record newlist with record page listSteven Rostedt
As new functions come in to be initalized from mcount to nop, they are done by groups of pages. Whether it is the core kernel or a module. There's no need to keep track of these on a per record basis. At startup, and as any module is loaded, the functions to be traced are stored in a group of pages and added to the function list at the end. We just need to keep a pointer to the first page of the list that was added, and use that to know where to start on the list for initializing functions. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21ftrace: Remove usage of "freed" recordsSteven Rostedt
Records that are added to the function trace table are permanently there, except for modules. By separating out the modules to their own pages that can be freed in one shot we can remove the "freed" flag and simplify some of the record management. Another benefit of doing this is that we can also move the records around; sort them. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21ftrace: Allow archs to modify code without stop machineSteven Rostedt
The stop machine method to modify all functions in the kernel (some 20,000 of them) is the safest way to do so across all archs. But some archs may not need this big hammer approach to modify code on SMP machines, and can simply just update the code it needs. Adding a weak function arch_ftrace_update_code() that now does the stop machine, will also let any arch override this method. If the arch needs to check the system and then decide if it can avoid stop machine, it can still call ftrace_run_stop_machine() to use the old method. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-31include: replace linux/module.h with "struct module" wherever possiblePaul Gortmaker
The <linux/module.h> pretty much brings in the kitchen sink along with it, so it should be avoided wherever reasonably possible in terms of being included from other commonly used <linux/something.h> files, as it results in a measureable increase on compile times. The worst culprit was probably device.h since it is used everywhere. This file also had an implicit dependency/usage of mutex.h which was masked by module.h, and is also fixed here at the same time. There are over a dozen other headers that simply declare the struct instead of pulling in the whole file, so follow their lead and simply make it a few more. Most of the implicit dependencies on module.h being present by these headers pulling it in have been now weeded out, so we can finally make this change with hopefully minimal breakage. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-11ftrace: Fix warning when CONFIG_FUNCTION_TRACER is not definedSteven Rostedt
The struct ftrace_hash was declared within CONFIG_FUNCTION_TRACER but was referenced outside of it. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07ftrace: Fix regression of :mod:module function enablingSteven Rostedt
The new code that allows different utilities to pick and choose what functions they trace broke the :mod: hook that allows users to trace only functions of a particular module. The reason is that the :mod: hook bypasses the hash that is setup to allow individual users to trace their own functions and uses the global hash directly. But if the global hash has not been set up, it will cause a bug: echo '*:mod:radeon' > /sys/kernel/debug/set_ftrace_filter produces: [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip BUG: unable to handle kernel paging request at ffffffff8160ec90 IP: [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 PGD 1a05067 PUD 1a09063 PMD 80000000016001e1 Oops: 0003 [#1] SMP Jul 7 04:02:28 phyllis kernel: [55303.858604] CPU 1 Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc rfcomm bnep ip6table_filter hid radeon r8169 ahci libahci mii ttm drm_kms_helper drm video i2c_algo_bit intel_agp intel_gtt Pid: 10344, comm: bash Tainted: G WC 3.0.0-rc5 #1 Dell Inc. Inspiron N5010/0YXXJJ RIP: 0010:[<ffffffff810d9136>] [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 RSP: 0018:ffff88003a96bda8 EFLAGS: 00010246 RAX: ffff8801301735c0 RBX: ffffffff8160ec80 RCX: 0000000000306ee0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880137c92940 RBP: ffff88003a96bdb8 R08: ffff880137c95680 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff81c9df78 R13: ffff8801153d1000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f329c18a700(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8160ec90 CR3: 000000003002b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 10344, threadinfo ffff88003a96a000, task ffff88012fcfc470) Stack: 0000000000000fd0 00000000000000fc ffff88003a96be38 ffffffff810d92f5 ffff88011c4c4e00 ffff880000000000 000000000b69f4d0 ffffffff8160ec80 ffff8800300e6f06 0000000081130295 0000000000000282 ffff8800300e6f00 Call Trace: [<ffffffff810d92f5>] match_records+0x155/0x1b0 [<ffffffff810d940c>] ftrace_mod_callback+0xbc/0x100 [<ffffffff810dafdf>] ftrace_regex_write+0x16f/0x210 [<ffffffff810db09f>] ftrace_filter_write+0xf/0x20 [<ffffffff81166e48>] vfs_write+0xc8/0x190 [<ffffffff81167001>] sys_write+0x51/0x90 [<ffffffff815c7e02>] system_call_fastpath+0x16/0x1b Code: 48 8b 33 31 d2 48 85 f6 75 33 49 89 d4 4c 03 63 08 49 8b 14 24 48 85 d2 48 89 10 74 04 48 89 42 08 49 89 04 24 4c 89 60 08 31 d2 RIP [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 RSP <ffff88003a96bda8> CR2: ffffffff8160ec90 ---[ end trace a5d031828efdd88e ]--- Reported-by: Brian Marete <marete@toshnix.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18ftrace: Modify ftrace_set_filter/notrace to take opsSteven Rostedt
Since users of the function tracer can now pick and choose which functions they want to trace agnostically from other users of the function tracer, we need to pass the ops struct to the ftrace_set_filter() functions. The functions ftrace_set_global_filter() and ftrace_set_global_notrace() is added to keep the old filter functions which are used to modify the generic function tracers. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18ftrace: Allow dynamically allocated function tracersSteven Rostedt
Now that functions may be selected individually, it only makes sense that we should allow dynamically allocated trace structures to be traced. This will allow perf to allocate a ftrace_ops structure at runtime and use it to pick and choose which functions that structure will trace. Note, a dynamically allocated ftrace_ops will always be called indirectly instead of being called directly from the mcount in entry.S. This is because there's no safe way to prevent mcount from being preempted before calling the function, unless we modify every entry.S to do so (not likely). Thus, dynamically allocated functions will now be called by the ftrace_ops_list_func() that loops through the ops that are allocated if there are more than one op allocated at a time. This loop is protected with a preempt_disable. To determine if an ftrace_ops structure is allocated or not, a new util function was added to the kernel/extable.c called core_kernel_data(), which returns 1 if the address is between _sdata and _edata. Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18ftrace: Implement separate user function filteringSteven Rostedt
ftrace_ops that are registered to trace functions can now be agnostic to each other in respect to what functions they trace. Each ops has their own hash of the functions they want to trace and a hash to what they do not want to trace. A empty hash for the functions they want to trace denotes all functions should be traced that are not in the notrace hash. Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18ftrace: Use counters to enable functions to traceSteven Rostedt
Every function has its own record that stores the instruction pointer and flags for the function to be traced. There are only two flags: enabled and free. The enabled flag states that tracing for the function has been enabled (actively traced), and the free flag states that the record no longer points to a function and can be used by new functions (loaded modules). These flags are now moved to the MSB of the flags (actually just the top 32bits). The rest of the bits (30 bits) are now used as a ref counter. Everytime a tracer register functions to trace, those functions will have its counter incremented. When tracing is enabled, to determine if a function should be traced, the counter is examined, and if it is non-zero it is set to trace. When a ftrace_ops is registered to trace functions, its hashes are examined. If the ftrace_ops filter_hash count is zero, then all functions are set to be traced, otherwise only the functions in the hash are to be traced. The exception to this is if a function is also in the ftrace_ops notrace_hash. Then that function's counter is not incremented for this ftrace_ops. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18ftrace: Create a global_ops to hold the filter and notrace hashesSteven Rostedt
Combine the filter and notrace hashes to be accessed by a single entity, the global_ops. The global_ops is a ftrace_ops structure that is passed to different functions that can read or modify the filtering of the function tracer. The ftrace_ops structure was modified to hold a filter and notrace hashes so that later patches may allow each ftrace_ops to have its own set of rules to what functions may be filtered. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18ftrace: Use hash instead for FTRACE_FL_FILTERSteven Rostedt
When multiple users are allowed to have their own set of functions to trace, having the FTRACE_FL_FILTER flag will not be enough to handle the accounting of those users. Each user will need their own set of functions. Replace the FTRACE_FL_FILTER with a filter_hash instead. This is temporary until the rest of the function filtering accounting gets in. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functionsSteven Rostedt
To prepare for the accounting system that will allow multiple users of the function tracer, having the FTRACE_FL_NOTRACE as a flag in the dyn_trace record does not make sense. All ftrace_ops will soon have a hash of functions they should trace and not trace. By making a global hash of functions not to trace makes this easier for the transition. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29ftrace: Remove FTRACE_FL_CONVERTED flagSteven Rostedt
Since we disable all function tracer processing if we detect that a modification of a instruction had failed, we do not need to track that the record has failed. No more ftrace processing is allowed, and the FTRACE_FL_CONVERTED flag is pointless. The FTRACE_FL_CONVERTED flag was used to denote records that were successfully converted from mcount calls into nops. But if a single record fails, all of ftrace is disabled. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29ftrace: Remove FTRACE_FL_FAILED flagSteven Rostedt
Since we disable all function tracer processing if we detect that a modification of a instruction had failed, we do not need to track that the record has failed. No more ftrace processing is allowed, and the FTRACE_FL_FAILED flag is pointless. Removing this flag simplifies some of the code, but some ftrace_disabled checks needed to be added or move around a little. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-11ftrace: Fix memory leak with function graph and cpu hotplugSteven Rostedt
When the fuction graph tracer starts, it needs to make a special stack for each task to save the real return values of the tasks. All running tasks have this stack created, as well as any new tasks. On CPU hot plug, the new idle task will allocate a stack as well when init_idle() is called. The problem is that cpu hotplug does not create a new idle_task. Instead it uses the idle task that existed when the cpu went down. ftrace_graph_init_task() will add a new ret_stack to the task that is given to it. Because a clone will make the task have a stack of its parent it does not check if the task's ret_stack is already NULL or not. When the CPU hotplug code starts a CPU up again, it will allocate a new stack even though one already existed for it. The solution is to treat the idle_task specially. In fact, the function_graph code already does, just not at init_idle(). Instead of using the ftrace_graph_init_task() for the idle task, which that function expects the task to be a clone, have a separate ftrace_graph_init_idle_task(). Also, we will create a per_cpu ret_stack that is used by the idle task. When we call ftrace_graph_init_idle_task() it will check if the idle task's ret_stack is NULL, if it is, then it will assign it the per_cpu ret_stack. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stable Tree <stable@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-21tracing/documentation: Document dynamic ftracer internalsMike Frysinger
Add more details to the dynamic function tracing design implementation. Signed-off-by: Mike Frysinger <vapier@gentoo.org> LKML-Reference: <1279610015-10250-1-git-send-email-vapier@gentoo.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-18Merge branch 'tracing-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix "integer as NULL pointer" warning. tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header tracing: Make the documentation clear on trace_event boot option ring-buffer: Wrap open-coded WARN_ONCE tracing: Convert nop macros to static inlines tracing: Fix sleep time function profiling tracing: Show sample std dev in function profiling tracing: Add documentation for trace commands mod, traceon/traceoff ring-buffer: Make benchmark handle missed events ring-buffer: Make non-consuming read less expensive with lots of cpus. tracing: Add graph output support for irqsoff tracer tracing: Have graph flags passed in to ouput functions tracing: Add ftrace events for graph tracer tracing: Dump either the oops's cpu source or all cpus buffers tracing: Fix uninitialized variable of tracing/trace output
2010-05-04tracing: Convert nop macros to static inlinesSteven Rostedt
The ftrace.h file contains several functions as macros when the functions are disabled due to config options. This patch converts most of them to static inlines. There are two exceptions: register_ftrace_function() and unregister_ftrace_function() This is because their parameter "ops" must not be evaluated since code using the function is allowed to #ifdef out the creation of the parameter. This also fixes an error caused by recent changes: kernel/trace/trace_irqsoff.c: In function 'start_irqsoff_tracer': kernel/trace/trace_irqsoff.c:571: error: expected expression before 'do' Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-27tracing: Add graph output support for irqsoff tracerJiri Olsa
Add function graph output to irqsoff tracer. The graph output is enabled by setting new 'display-graph' trace option. Signed-off-by: Jiri Olsa <jolsa@redhat.com> LKML-Reference: <1270227683-14631-4-git-send-email-jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21tracing: Dump either the oops's cpu source or all cpus buffersFrederic Weisbecker
The ftrace_dump_on_oops kernel parameter, sysctl and sysrq let one dump every cpu buffers when an oops or panic happens. It's nice when you have few cpus but it may take ages if have many, plus you miss the real origin of the problem in all the cpu traces. Sometimes, all you need is to dump the cpu buffer that triggered the opps, most of the time it is our main interest. This patch modifies ftrace_dump_on_oops to handle this choice. The ftrace_dump_on_oops kernel parameter, when it comes alone, has the same behaviour than before. But ftrace_dump_on_oops=orig_cpu will only dump the buffer of the cpu that oops'ed. Similarly, sysctl kernel.ftrace_dump_on_oops=1 and echo 1 > /proc/sys/kernel/ftrace_dump_on_oops keep their previous behaviour. But setting 2 jumps into cpu origin dump mode. v2: Fix double setup v3: Fix spelling issues reported by Randy Dunlap v4: Also update __ftrace_dump in the selftests Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
2010-03-26x86, perf, bts, mm: Delete the never used BTS-ptrace codePeter Zijlstra
Support for the PMU's BTS features has been upstreamed in v2.6.32, but we still have the old and disabled ptrace-BTS, as Linus noticed it not so long ago. It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without regard for other uses (perf) and doesn't provide the flexibility needed for perf either. Its users are ptrace-block-step and ptrace-bts, since ptrace-bts was never used and ptrace-block-step can be implemented using a much simpler approach. So axe all 3000 lines of it. That includes the *locked_memory*() APIs in mm/mlock.c as well. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Markus Metzger <markus.t.metzger@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <20100325135413.938004390@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-28Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (172 commits) perf_event, amd: Fix spinlock initialization perf_event: Fix preempt warning in perf_clock() perf tools: Flush maps on COMM events perf_events, x86: Split PMU definitions into separate files perf annotate: Handle samples not at objdump output addr boundaries perf_events, x86: Remove superflous MSR writes perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in() perf_events, x86: AMD event scheduling perf_events: Add new start/stop PMU callbacks perf_events: Report the MMAP pgoff value in bytes perf annotate: Defer allocating sym_priv->hist array perf symbols: Improve debugging information about symtab origins perf top: Use a macro instead of a constant variable perf symbols: Check the right return variable perf/scripts: Tag syscall_name helper as not yet available perf/scripts: Add perf-trace-python Documentation perf/scripts: Remove unnecessary PyTuple resizes perf/scripts: Add syscall tracing scripts perf/scripts: Add Python scripting engine perf/scripts: Remove check-perf-trace from listed scripts ... Fix trivial conflict in tools/perf/util/probe-event.c
2010-02-17tracing: Unify arch_syscall_addr() implementationsMike Frysinger
Most implementations of arch_syscall_addr() are the same, so create a default version in common code and move the one piece that differs (the syscall table) to asm/syscall.h. New arch ports don't have to waste time copying & pasting this simple function. The s390/sparc versions need to be different, so document why. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1264498803-17278-1-git-send-email-vapier@gentoo.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-04ftrace: Remove record freezingMasami Hiramatsu
Remove record freezing. Because kprobes never puts probe on ftrace's mcount call anymore, it doesn't need ftrace to check whether kprobes on it. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: przemyslaw@pawelczyk.it Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100202214925.4694.73469.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04ftrace/alternatives: Introducing *_text_reserved functionsMasami Hiramatsu
Introducing *_text_reserved functions for checking the text address range is partially reserved or not. This patch provides checking routines for x86 smp alternatives and dynamic ftrace. Since both functions modify fixed pieces of kernel text, they should reserve and protect those from other dynamic text modifier, like kprobes. This will also be extended when introducing other subsystems which modify fixed pieces of kernel text. Dynamic text modifiers should avoid those. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: przemyslaw@pawelczyk.it Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <20100202214911.4694.16587.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07tracing: correct module boundaries for ftrace_releasejolsa@redhat.com
When the module is about the unload we release its call records. The ftrace_release function was given wrong values representing the module core boundaries, thus not releasing its call records. Plus making ftrace_release function module specific. Signed-off-by: Jiri Olsa <jolsa@redhat.com> LKML-Reference: <1254934835-363-3-git-send-email-jolsa@redhat.com> Cc: stable@kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-24sysctl: remove "struct file *" argument of ->proc_handlerAlexey Dobriyan
It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-20includecheck fix: include/linux, ftrace.hJaswinder Singh Rajput
fix the following 'make includecheck' warning: include/linux/ftrace.h: linux/sched.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247068321.4382.102.camel@ht.satnam>
2009-06-18function-graph: add stack frame testSteven Rostedt
In case gcc does something funny with the stack frames, or the return from function code, we would like to detect that. An arch may implement passing of a variable that is unique to the function and can be saved on entering a function and can be tested when exiting the function. Usually the frame pointer can be used for this purpose. This patch also implements this for x86. Where it passes in the stack frame of the parent function, and will test that frame on exit. There was a case in x86_32 with optimize for size (-Os) where, for a few functions, gcc would align the stack frame and place a copy of the return address into it. The function graph tracer modified the copy and not the actual return address. On return from the funtion, it did not go to the tracer hook, but returned to the parent. This broke the function graph tracer, because the return of the parent (where gcc did not do this funky manipulation) returned to the location that the child function was suppose to. This caused strange kernel crashes. This test detected the problem and pointed out where the issue was. This modifies the parameters of one of the functions that the arch specific code calls, so it includes changes to arch code to accommodate the new prototype. Note, I notice that the parsic arch implements its own push_return_trace. This is now a generic function and the ftrace_push_return_trace should be used instead. This patch does not touch that code. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-17tracing: add same level recursion detectionSteven Rostedt
The tracing infrastructure allows for recursion. That is, an interrupt may interrupt the act of tracing an event, and that interrupt may very well perform its own trace. This is a recursive trace, and is fine to do. The problem arises when there is a bug, and the utility doing the trace calls something that recurses back into the tracer. This recursion is not caused by an external event like an interrupt, but by code that is not expected to recurse. The result could be a lockup. This patch adds a bitmask to the task structure that keeps track of the trace recursion. To find the interrupt depth, the following algorithm is used: level = hardirq_count() + softirq_count() + in_nmi; Here, level will be the depth of interrutps and softirqs, and even handles the nmi. Then the corresponding bit is set in the recursion bitmask. If the bit was already set, we know we had a recursion at the same level and we warn about it and fail the writing to the buffer. After the data has been committed to the buffer, we clear the bit. No atomics are needed. The only races are with interrupts and they reset the bitmask before returning anywy. [ Impact: detect same irq level trace recursion ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-17ftrace: use module notifier for function tracerSteven Rostedt
The hooks in the module code for the function tracer must be called before any of that module code runs. The function tracer hooks modify the module (replacing calls to mcount to nops). If the code is executed while the change occurs, then the CPU can take a GPF. To handle the above with a bit of paranoia, I originally implemented the hooks as calls directly from the module code. After examining the notifier calls, it looks as though the start up notify is called before any of the module's code is executed. This makes the use of the notify safe with ftrace. Only the startup notify is required to be "safe". The shutdown simply removes the entries from the ftrace function list, and does not modify any code. This change has another benefit. It removes a issue with a reverse dependency in the mutexes of ftrace_lock and module_mutex. [ Impact: fix lock dependency bug, cleanup ] Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-10Merge branch 'tracing/urgent' into tracing/coreIngo Molnar
Merge reason: pick up both v2.6.30-rc1 [which includes tracing/urgent fixes] and pick up the current lineup of tracing/urgent fixes as well Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09tracing/syscalls: use a dedicated file headerFrederic Weisbecker
Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jason Baron <jbaron@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Michael Davidson <md@google.com> LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08tracing: append a comma to INIT_FTRACE_GRAPHTetsuo Handa
Impact: dont break future extensions of INIT_TASK While not a problem right now, due to lack of a comma, build fails if elements are appended to INIT_TASK() macro in development code: arch/x86/kernel/init_task.c:33: error: request for member `XXXXXXXXXX' in something not a structure or union arch/x86/kernel/init_task.c:33: error: initializer element is not constant arch/x86/kernel/init_task.c:33: error: (near initialization for `init_task.ret_stack') make[1]: *** [arch/x86/kernel/init_task.o] Error 1 make: *** [arch/x86/kernel] Error 2 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: srostedt@redhat.com LKML-Reference: <200904080505.n3855hcn017109@www262.sakura.ne.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07Merge branch 'tracing/urgent' into tracing/ftraceIngo Molnar
2009-04-07function-graph: add proper initialization for init taskSteven Rostedt
Impact: fix to crash going to kexec The init task did not properly initialize the function graph pointers. Altough these pointers are NULL, they can not be assumed to be NULL for the init task, and must still be properly initialize. This usually is not an issue since a problem only arises when a task exits, and the init tasks do not usually exit. But when doing tests with kexec, the init tasks do exit, and the bug appears. This patch properly initializes the init tasks function graph data structures. Reported-and-Tested-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <alpine.DEB.2.00.0903252053080.5675@gandalf.stny.rr.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24function-graph: add option to calculate graph time or notSteven Rostedt
graph time is the time that a function is executing another function. Thus if function A calls B, if graph-time is set, then the time for A includes B. This is the default behavior. But if graph-time is off, then the time spent executing B is subtracted from A. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24tracing: move function profiler data out of function structSteven Rostedt
Impact: reduce size of memory in function profiler The function profiler originally introduces its counters into the function records itself. There is 20 thousand different functions on a normal system, and that is adding 20 thousand counters for profiling event when not needed. A normal run of the profiler yields only a couple of thousand functions executed, depending on what is being profiled. This means we have around 18 thousand useless counters. This patch rectifies this by moving the data out of the function records used by dynamic ftrace. Data is preallocated to hold the functions when the profiling begins. Checks are made during profiling to see if more recorcds should be allocated, and they are allocated if it is safe to do so. This also removes the dependency from using dynamic ftrace, and also removes the overhead by having it enabled. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24tracing: add function profilerSteven Rostedt
Impact: new profiling feature This patch adds a function profiler. In debugfs/tracing/ two new files are created. function_profile_enabled - to enable or disable profiling trace_stat/functions - the profiled functions. For example: echo 1 > /debugfs/tracing/function_profile_enabled ./hackbench 50 echo 0 > /debugfs/tracing/function_profile_enabled yields: cat /debugfs/tracing/trace_stat/functions Function Hit -------- --- _spin_lock 10106442 _spin_unlock 10097492 kfree 6013704 _spin_unlock_irqrestore 4423941 _spin_lock_irqsave 4406825 __phys_addr 4181686 __slab_free 4038222 dput 4030130 path_put 4023387 unroll_tree_refs 4019532 [...] The most hit functions are listed first. Functions that are not hit are not listed. This feature depends on and uses dynamic function tracing. When the function profiling is disabled, no overhead occurs. But it still takes up around 300KB to hold the data, thus it is not recomended to keep it enabled for systems low on memory. When a '1' is echoed into the function_profile_enabled file, the counters for is function is reset back to zero. Thus you can see what functions are hit most by different programs. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24tracing: use union for multi-usages fieldLai Jiangshan
Impact: cleanup struct dyn_ftrace::ip has different usages in his lifecycle, we use union for it. And also for struct dyn_ftrace::flags. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49C871BE.3080405@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24function-graph: moved the timestamp from arch to generic codeSteven Rostedt
This patch move the timestamp from happening in the arch specific code into the general code. This allows for better control by the tracer to time manipulation. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-16Merge branches 'tracing/ftrace', 'tracing/syscalls' and 'linus' into ↵Ingo Molnar
tracing/core Conflicts: arch/parisc/kernel/irq.c