summaryrefslogtreecommitdiff
path: root/include/linux/mtd
AgeCommit message (Collapse)Author
2015-10-23Merge tag 'v4.1.11' into toradex_vf_4.1-nextStefan Agner
This is the 4.1.11 stable release
2015-08-16mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflictScott Wood
commit 5f867db63473f32cce1b868e281ebd42a41f8fad upstream. Commit 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER using the same bit value as the existing NAND_BUSWIDTH_AUTO. Cc: Kamal Dasu <kdasu.kdev@gmail.com> Fixes: 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-01mtd: nand: add common DT init codeBrian Norris
These are already-documented common bindings for NAND chips. Let's handle them in nand_base. If NAND controller drivers need to act on this data before bringing up the NAND chip (e.g., fill out ECC callback functions, change HW modes, etc.), then they can do so between calling nand_scan_ident() and nand_scan_tail(). Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-27mtd: spi-nor: factor out replace-able flash_{lock,unlock}Brian Norris
Flash lock/unlock is a flash-specific operations. Factor out a callback for it to more readily support other vendors. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: VIET NGA DAO <vndao@altera.com>
2015-03-11mtd: clean up whitespace in linux/mtd/map.hArnd Bergmann
As the only comments I got for the "mtd: cfi: reduce stack size" patch were about whitespace changes, it appears necessary to fix up the rest of the file as well, which contains the exact same mistakes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11mtd: cfi: reduce stack sizeArnd Bergmann
The cfi_staa_write_buffers function uses a large amount of kernel stack whenever CONFIG_MTD_MAP_BANK_WIDTH_32 is set, and that results in a warning on ARM allmodconfig builds: drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers': drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] It turns out that this is largely a result of a suboptimal implementation of map_word_andequal(). Replacing this function with a straightforward one reduces the stack size in this function by exactly 200 bytes, shrinks the .text segment for this file from 27648 bytes to 26608 bytes, and makes the warning go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-18Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: - Add new Hisilicon NAND driver for Hip04 - Add default reboot handler, to ensure all outstanding erase transactions complete in time - jz4740: convert to use GPIO descriptor API - Atmel: add support for sama5d4 - Change default bitflip threshold to 75% of correction strength - Miscellaneous cleanups and bugfixes SPI NOR: - Freescale QuadSPI: - Fix a few probe() and remove() issues - Add a MAINTAINERS entry for this driver - Tweak transfer size to increase read performance - Add suspend/resume support - Add Micron quad I/O support - ST FSM SPI: miscellaneous fixes JFFS2: - gracefully handle corrupted 'offset' field found on flash Other: - bcm47xxpart: add tweaks for a few new devices - mtdconcat: set return lengths properly for mtd_write_oob() - map_ram: enable use with mtdoops - maps: support fallback to ROM/UBI for write-protected NOR flash" * tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits) mtd: hisilicon: && vs & typo jffs2: fix handling of corrupted summary length mtd: hisilicon: add device tree binding documentation mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc mtd: avoid registering reboot notifier twice mtd: concat: set the return lengths properly mtd: kconfig: replace PPC_OF with PPC mtd: denali: remove unnecessary stubs mtd: nand: remove redundant local variable MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver mtd: fsl-quadspi: improve read performance by increase AHB transfer size mtd: fsl-quadspi: Remove unnecessary 'map_failed' label mtd: fsl-quadspi: Remove unneeded success/error messages mtd: fsl-quadspi: Fix the error paths mtd: nand: omap: drop condition with no effect mtd: nand: jz4740: Convert to GPIO descriptor API mtd: nand: Request strength instead of bytes for soft BCH mtd: nand: default bitflip-reporting threshold to 75% of correction strength mtd: atmel_nand: introduce a new compatible string for sama5d4 chip mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction() ...
2015-02-15Merge branch 'for-linus-v3.20' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI and UBIFS updates from Richard Weinberger: - cleanups and bug fixes all over UBI and UBIFS - block-mq support for UBI Block - UBI volumes can now be renamed while they are in use - security.* XATTR support for UBIFS - a maintainer update * 'for-linus-v3.20' of git://git.infradead.org/linux-ubifs: UBI: block: Fix checking for NULL instead of IS_ERR() UBI: block: Continue creating ubiblocks after an initialization error UBIFS: return -EINVAL if log head is empty UBI: Block: Explain usage of blk_rq_map_sg() UBI: fix soft lockup in ubi_check_volume() UBI: Fastmap: Care about the protection queue UBIFS: add a couple of extra asserts UBI: do propagate positive error codes up UBI: clean-up printing helpers UBI: extend UBI layer debug/messaging capabilities - cosmetics UBIFS: add ubifs_err() to print error reason UBIFS: Add security.* XATTR support for the UBIFS UBIFS: Add xattr support for symlinks UBI: Block: Add blk-mq support UBI: Add initial support for scatter gather UBI: rename_volumes: Use UBI_METAONLY UBI: Implement UBI_METAONLY Add myself as UBI co-maintainer
2015-01-28UBI: Add initial support for scatter gatherRichard Weinberger
Adds a new set of functions to deal with scatter gather. ubi_eba_read_leb_sg() will read from a LEB into a scatter gather list. The new data structure struct ubi_sgl will be used within UBI to hold the scatter gather list itself and metadata to have a cursor within the list. Signed-off-by: Richard Weinberger <richard@nod.at> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-28UBI: Implement UBI_METAONLYRichard Weinberger
UBI_METAONLY is a new open mode for UBI volumes, it indicates that only meta data is being changed. Meta data in terms of UBI volumes means data which is stored in the UBI volume table but not on the volume itself. While it does not interfere with UBI_READONLY and UBI_READWRITE it is not allowed to use UBI_METAONLY together with UBI_EXCLUSIVE. Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Andrew Murray <amurray@embedded-bits.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at> Tested-by: Guido Martínez <guido@vanguardiasur.com.ar> Reviewed-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Andrew Murray <amurray@embedded-bits.co.uk>
2015-01-20fs: introduce f_op->mmap_capabilities for nommu mmap supportChristoph Hellwig
Since "BDI: Provide backing device capability information [try #3]" the backing_dev_info structure also provides flags for the kind of mmap operation available in a nommu environment, which is entirely unrelated to it's original purpose. Introduce a new nommu-only file operation to provide this information to the nommu mmap code instead. Splitting this from the backing_dev_info structure allows to remove lots of backing_dev_info instance that aren't otherwise needed, and entirely gets rid of the concept of providing a backing_dev_info for a character device. It also removes the need for the mtd_inodefs filesystem. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-07mtd: implement common reboot notifier boilerplateBrian Norris
cfi_cmdset_000{1,2}.c already implement their own reboot notifiers, and we're going to add one for NAND. Let's put the boilerplate in one place. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Scott Branden <sbranden@broadcom.com>
2015-01-07mtd: spi-nor: Add quad I/O support for Micron SPI NORBean Huo 霍斌斌 (beanhuo)
This patch adds code which enables Quad I/O mode on Micron SPI NOR flashes. For Micron SPI NOR flash, enabling or disabling quad I/O protocol can be done By two methods, which are to use EVCR (Enhanced Volatile Configuration Register) and the ENTER QUAD I/O MODE command. There is no difference between these two methods. Unfortunately, for some Micron SPI NOR flashes, there no ENTER Quad I/O command (35h), such as n25q064. But for all current Micron SPI NOR, if it support quad I/O mode, using EVCR definitely be supported. It is a recommended method to enable Quad I/O mode by EVCR, Quad I/O protocol bit 7. When EVCR bit 7 is reset to 0, the SPI NOR flash will operate in quad I/O mode. This patch has been tested on N25Q512A and MT25TL256BAA1ESF. Micron SPI NOR of spi_nor_ids[] table all support this method. Signed-off-by: Bean Huo <beanhuo@micron.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25mtd: nand: add ATO manufacturer infoBrian Norris
Tested with ATO AFND1G08U3, 128MiB NAND. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-20mtd: nand: provide detailed description for raw read/write page methodsBoris BREZILLON
read_page_raw and write_page_raw method description is not clear enough. It clearly specifies that ECC correction should not be involved but does not talk about specific layout (by layout I mean where in-band and out-of-band data are stored on the NAND media) used by NAND/ECC controllers. Those specific layouts might impact MTD users and thus should be hidden (as already done in the standard NAND_ECC_HW_SYNDROME implementation). Clearly state this constraint in the nand_ecc_ctrl struct documentation. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: spi-nor: drop replaceable wait-till-ready function pointerBrian Norris
We don't need to expose a 'wait-till-ready' interface to drivers. Status register polling should be handled by the core spi-nor.c library, and as of now, I see no need to provide a special driver-specific hook for it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05mtd: m25p80: drop wait-till-ready checksBrian Norris
spi-nor.c should be taking care of these now. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-10-21spi-nor: Remove spi_nor::read_id operationBen Hutchings
There is currently no useful way to override the default implementation of this operation. The returned struct spi_device_id must have a pointer to struct flash_info in its private data, but this structure is defined inside spi-nor. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-21mtd: m25p80,spi-nor: Fix module aliases for m25p80Ben Hutchings
m25p80's device ID table is now spi_nor_ids, defined in spi-nor. The MODULE_DEVICE_TABLE() macro doesn't work with extern definitions, but its use was also removed at the same time. Now if m25p80 is built as a module it doesn't get the necessary aliases to be loaded automatically. A clean solution to this will involve defining the list of device IDs in spi-nor.h and removing struct spi_device_id from the spi-nor API, but this is quite a large change. As a quick fix suitable for stable, copy the device IDs back into m25p80. Fixes: 03e296f613af ("mtd: m25p80: use the SPI nor framework") Cc: <stable@vger.kernel.org> # 3.16.x: 32f1b7c8352f: mtd: move support for struct flash_platform_data into m25p80 Cc: <stable@vger.kernel.org> # 3.16.x: 90e55b3812a1: mtd: m25p80: get rid of spi_get_device_id Cc: <stable@vger.kernel.org> # 3.16.x: 70f3ce0510af: mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id Cc: <stable@vger.kernel.org> # 3.16.x Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-17mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_idBen Hutchings
Drivers currently call spi_nor_match_id() and then spi_nor_scan(). This adds a dependency on struct spi_device_id which we want to avoid. Make spi_nor_scan() do it for them. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDsBoris BREZILLON
Add an onfi_timing_mode_default field to nand_chip and nand_flash_dev in order to support NAND timings definition for non-ONFI NAND. NAND that support better timings mode than the default one have to define a new entry in the nand_ids table. The default timing mode should be deduced from timings description from the datasheet and the ONFI specification (www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf, chapter 4.15 "Timing Parameters"). You should choose the closest mode that fit the timings requirements of your NAND chip. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19Merge l2-mtd/next into l2-mtd/masterBrian Norris
2014-08-19mtd: nand: fix DocBook warnings on nand_sdr_timings docBoris BREZILLON
Change the comment type (from /** to /*) to prevent DocBook from complaining about missing description for nand_sdr_timings fields. There is currently no need in documenting those fields because they are fully described in the ONFI specification (which is pointed out in the comment). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: use __packed shorthandBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: fix linux/mtd/nand.h kernel-doc warningRandy Dunlap
Fix kernel-doc warning in <linux/mtd/nand.h>: Warning(..//include/linux/mtd/nand.h:795): No description found for parameter 'ecc' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21mtd: nand: add ONFI timing mode to nand_timings converterBoris BREZILLON
Add a converter to retrieve NAND timings from an ONFI NAND timing mode. At the moment, only SDR NAND timings are supported. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21mtd: nand: define struct nand_timingsBoris BREZILLON
Define a struct containing the standard NAND timings as described in NAND datasheets. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-11mtd: spi-nor: add support for flag status register on Micron chipsgrmoore@altera.com
Some new Micron flash chips require reading the flag status register to determine when operations have completed. Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also require reading the status register before reading the flag status register. This patch adds support for the flag status register in the n25q512ax3 and n25q00 Micron QSPI flash chips. Signed-off-by: Graham Moore <grmoore@altera.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-08mtd: Introduce mtd_block_isreserved()Ezequiel Garcia
In addition to mtd_block_isbad(), which checks if a block is bad or reserved, it's needed to check if a block is reserved only (but not bad). This commit adds an MTD interface for it, in a similar fashion to mtd_block_isbad(). While here, fix mtd_block_isbad() so the out-of-bounds checking is done before the callback check. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-06-11Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ...
2014-05-28mtd: pfow: remove unused variableBrian Norris
Fixes warning: In file included from drivers/mtd/lpddr/qinfo_probe.c:31:0: include/linux/mtd/pfow.h: In function ‘send_pfow_command’: include/linux/mtd/pfow.h:104:6: warning: variable ‘chipnum’ set but not used [-Wunused-but-set-variable] int chipnum; ^ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-20mtd: nand: Add support to use nand_base poi databuf as bounce bufferKamal Dasu
nand_base can be passed a kmap()'d buffers from highmem by filesystems like jffs2. This results in failure to map the physical address of the DMA buffer on various contoller driver on different platforms. This change adds a chip option to use preallocated databuf as bounce buffers used in nand_do_read_ops() and nand_do_write_ops(). This allows for specific nand controller driver to set this option as needed. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-09mtd: nand: refactor erase_cmd() to return chip statusBrian Norris
The nand_chip::erase_cmd callback previously served a dual purpose; for one, it allowed a per-flash-chip override, so that AG-AND devices could use a different erase command than other NAND. These AND devices were dropped in commit 14c6578683367b1e7af0c3c09e872b45a45183a7 (mtd: nand: remove AG-AND support). On the other hand, some drivers (denali and doc-g4) need to use this sort of callback to implement controller-specific erase operations. To make the latter operation easier for some drivers (e.g., ST's new BCH NAND driver), it helps if the command dispatch and wait functions can be lumped together, rather than called separately. This patch does two things: 1. Pull the call to chip->waitfunc() into chip->erase_cmd(), and return the status from this callback 2. Rename erase_cmd() to just erase(), since this callback does a little more than just send a command Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Lee Jones <lee.jones@linaro.org>
2014-04-18Shiraz has movedViresh Kumar
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-14mtd: spi-nor: unify read opcode variants with ST SPI FSMBrian Norris
serial_flash_cmds.h defines our opcodes a little differently. Let's borrow its naming, since it's borrowed from the SFDP standard, and it's more extensible. This prepares us for merging serial_flash_cmds.h and spi-nor.h opcode listing. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*Brian Norris
Qualify these with a better namespace, and prepare them for use in more drivers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: spi-nor: drop \t after #defineBrian Norris
Spacing is a little non-standard here. Fix up tabs vs. spaces. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-04-14mtd: spi-nor: add the copyright informationHuang Shijie
Add the copyright information for spi-nor.c and spi-nor.h. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: add a helper to find the spi_device_idHuang Shijie
Add the spi_nor_match_id() to find the proper spi_device_id with the NOR flash's name in the spi_nor_ids table. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: add the framework for SPI NORHuang Shijie
This patch cloned most of the m25p80.c. In theory, it adds a new spi-nor layer. Before this patch, the layer is like: MTD ------------------------ m25p80 ------------------------ spi bus driver ------------------------ SPI NOR chip After this patch, the layer is like: MTD ------------------------ spi-nor ------------------------ m25p80 ------------------------ spi bus driver ------------------------ SPI NOR chip With the spi-nor controller driver(Freescale Quadspi), it looks like: MTD ------------------------ spi-nor ------------------------ fsl-quadspi ------------------------ SPI NOR chip New APIs: spi_nor_scan: used to scan a spi-nor flash. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> [Brian: rebased to include additional m25p_ids[] entry] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: add the basic data structuresHuang Shijie
The spi_nor{} is cloned from the m25p{}. The spi_nor{} can be used by both the m25p80 and spi-nor controller. We also add the spi_nor_xfer_cfg{} which can be used by the two fundamental primitives: read_xfer/write_xfer. 1) the hooks for spi_nor{}: @prepare/unpreare: used to do some work before or after the read/write/erase/lock/unlock. @read_xfer/write_xfer: We can use these two hooks to code all the following hooks if the driver tries to implement them by itself. @read_reg: used to read the registers, such as read status register, read configure register. @write_reg: used to write the registers, such as write enable, erase sector. @read_id: read out the ID info. @wait_till_ready: wait till the NOR becomes ready. @read: read out the data from the NOR. @write: write data to the NOR. @erase: erase a sector of the NOR. 2) Add a new field sst_write_second for the SST NOR write. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: copy the SPI NOR commands to a new header fileHuang Shijie
This patch adds a new header :spi-nor.h, and copies all the SPI NOR commands and relative macros into this new header. This hearder can be used by the m25p80.c and other spi-nor controller, such as Freescale's Quadspi. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: nand: fix GET/SET_FEATURES address on 16-bit devicesDavid Mosberger
GET_FEATURES and SET_FEATURES also need byte-addressing on 16-bit devices. Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: nand: add "page" argument for read_subpage hookHuang Shijie
Add the "page" argument for the read_subpage hook. With this argument, the implementation of this hook could prints out more accurate information for debugging. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: Add a retlen parameter to _get_{fact,user}_prot_infoChristian Riesch
Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: nand: parse out the JEDEC compliant NANDHuang Shijie
This patch adds the parsing code for the JEDEC compliant NAND. Since we need the 0x40 as the column address, this patch also makes the NAND_CMD_PARAM to use the 8-bit address only. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: nand: add a helper to get the supported features for JEDECHuang Shijie
Add a helper to get the supported features for JEDEC compliant NAND. Also add a macro JEDEC_FEATURE_16_BIT_BUS. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: nand: add fields for JEDEC in nand_chipHuang Shijie
Add the jedec_version field, and add an anonymous union which contains the nand_onfi_params and nand_jedec_params. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: nand: add the data structures for JEDEC parameter pageHuang Shijie
Create the nand_jedec_params{} and jedec_ecc_info{} according to the JESD230A (Revision of JESD230, October 2012). Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: nand: force NAND_CMD_READID onto 8-bit busBrian Norris
The NAND command helpers tend to automatically shift the column address for x16 bus devices, since most commands expect a word address, not a byte address. The Read ID command, however, expects an 8-bit address (i.e., 0x00, 0x20, or 0x40 should not be translated to 0x00, 0x10, or 0x20). This fixes the column address for a few drivers which imitate the nand_base defaults. Note that I don't touch sh_flctl.c, since it already handles this problem slightly differently (note its comment "READID is always performed using an 8-bit bus"). I have not tested this patch, as I only have x8 parts up for testing at this point. Hopefully that can change soon... Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-By: Pekon Gupta <pekon@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-12 00:44:13 +0000