summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (6466): v4l2-i2c-drv: first call remove, then detach clientHans Verkuil
The remove driver function expects that the client is still attached to the driver, so do the detach after calling remove(). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6460): v4l2-i2c-drv: add legacy_probe function pointerHans Verkuil
Some devices do complicated tests whether the device can be probed or not. Add a legacy_probe function pointer to support that. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6451): v4l2: add support for bus-based I2C driversHans Verkuil
Two new headers were added: one for I2C drivers that are only used by V4L2 drivers converted to the new bus-based I2C API, and one that can be used by both converted and unconverted drivers (at the expense of some additional overhead). To support the legacy I2C API a helper function was added to v4l2-common.c. These headers take care of all the 'boilerplate' code that all V4L2 I2C drivers have in common and will automatically support the bus-based I2C API introduced in kernel 2.6.22. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6435): tda8290: add support for NXP TDA18271 tuner and TDA8295 ↵Michael Krufky
analog demod Add basic support for NXP TDA8295 analog demod and TDA18271 tuner silicon. TDA8295 + TDA8275a not yet tested. TDA8290 + TDA18271 not yet supported. Digital mode of TDA18271 not yet tested & needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6422): Add the pending entries for xc2028/3028 based boardsMauro Carvalho Chehab
Also replaces all occurrences of TUNER_XCEIVE_XC3028 to TUNER_XC2028. Some work is still may be required to make sure that non-tm6000 drivers will be capable of using tuner-xc2028. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6384): Replace TDA9887_SET_CONFIG by TUNER_SET_CONFIGMauro Carvalho Chehab
Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6601): V4L: videobuf-core locking fixes and commentsBrandon Philips
- Add comments to functions that require that caller hold q->lock - Add __videobuf_mmap_free that doesn't hold q->lock for use within videobuf - Add locking to videobuf_mmap_free - Fix linux/drivers/media/common/saa7146_video.c which was holding lock around videobuf_read_stop - Add locking to functions that operate on a queue - Add videobuf_stop to take care of stopping in both the read and stream case TODO: bttv still has an unsafe call to videobuf_queue_is_busy Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-23[PATCH] Fix breakage after SG cleanupsRalf Baechle
Commits 58b053e4ce9d2fc3023645c1b96e537c72aa8d9a ("Update arch/ to use sg helpers") 45711f1af6eff1a6d010703b4862e0d2b9afd056 ("[SG] Update drivers to use sg helpers") fa05f1286be25a8ce915c5dd492aea61126b3f33 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22V4L/DVB (6321): Remove obsolete VIDIOC_S/G_MPEGCOMP ioctlsHans Verkuil
Remove the obsolete VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP ioctls from the V4L2 API as per the removal schedule (October 2007). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6320): v4l core: remove the unused .hardware V4L1 fieldMauro Carvalho Chehab
struct video_device used to define a .hardware field. While initialized on severl drivers, this field is never used inside V4L. However, drivers using it need to include the old V4L1 header. This seems to cause compilation troubles with some random configs. Better just to remove it from all drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-13v4l: copy_to_user() is not a good method nameAl Viro
Breaks on any target that has copy_to_user() defined as a non-trivial macro. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10V4L/DVB (6293): V4L: convert struct class_device to struct deviceKay Sievers
The currently used "struct class_device" will be removed from the kernel. Here is a patch that converts all users in drivers/media/video/ to struct device. Reviewed-by: Thierry Merle <thierry.merle@free.fr> Reviewed-by: Mike Isely <isely@pobox.com> Reviewed-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6292): videobuf_core init always require callback implementationMauro Carvalho Chehab
In the past, videobuf_queue_init were used to initialize PCI DMA videobuffers. This patch renames it, to avoid confusion with the previous kernel API, doing: s/videobuf_queue_init/void videobuf_queue_core_init/ Also, the operations is now part of the function parameter. The function will also add a test if this is defined, otherwise producing BUG. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6290): remove videobuf_set_pci_opsMauro Carvalho Chehab
Before the videobuf redesign, a procedure for re-using videobuf without PCI scatter/gather where provided by changing the pci-dependent operations by other operations. With the newer approach, those methods are obsolete and can safelly be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6266): videobuf cleanup: mmap check is common to all videobuf. Make ↵Mauro Carvalho Chehab
it at core Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with ↵Mauro Carvalho Chehab
the other patches Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6256): Remove the obsolete video-buf moduleMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09V4L/DVB (6254): Add videobuf-vmallocMauro Carvalho Chehab
Adds a newer videobuf-vmalloc module. This module uses the same videobuf controls, but implements memory allocation based on vmalloc methods. With this method, an USB driver can use video-buf, without needing to request memory from the DMA-safe area. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6252): Adapt drivers to use the newer videobuf modulesMauro Carvalho Chehab
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09V4L/DVB (6251): Replace video-buf to a more generic approachMauro Carvalho Chehab
video-buf currently does two different tasks: - Manages video buffers with a common code that allows implementing all the V4L2 different modes of buffering; - Controls memory allocations While the first task is generic, the second were written to support PCI DMA Scatter/Gather needs. The original approach can't even work for those video capture hardware that don't support scatter/gather. I did one approach to make it more generic. While the approach worked fine for vivi driver, it were not generic enough to handle USB needs. This patch creates two different modules, one containing the generic video buffer handling (videobuf-core) and another with PCI DMA S/G. After this patch, it would be simpler to write an USB video-buf and a non-SG DMA module. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09V4L/DVB (6219): V4L: Int if: Remove [gs]_ext_clkSakari Ailus
Remove support for g_ext_clk and s_ext_clk. The same functionality is now handled by g_ifparm. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6217): V4L: Int if: Add BT.656 interface supportSakari Ailus
This patch adds BT.656 interface settings for [gs]_ifparm. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6216): V4L: Int if: add vidioc_int_g_ifparm, other updatesSakari Ailus
vidioc_int_g_ifparm can be used to obtain hardware-specific information about the interface used by the slave. Rearrange v4l2-int-device.h as well. Also remove useless & characters. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6179): Clean up FusionHDTV ir codeMichael Krufky
- fixed missing buttons in keymap. - make function names & descriptions more generic, since this same ir receiver and remote is used in many FusionHDTV products. - miscellaneous cleanups. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6178): add IR remote support for FusionHDTV 5 RT GoldChaogui Zhang
This patch adds support for the built-in IR receiver of the DViCO Fusion HDTV5 RT GOLD PCI card, using FusionHDTV MCE remote controller. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6123): ivtv: move ivtv.h public header to include/linuxHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6119): ivtvfb: renamed ivtv-fb to ivtvfb, move header to include/linuxHans Verkuil
The convention for framebuffer devices is to call them xxxfb, not xxx-fb. Conform to this. Also move the ivtvfb.h header to include/linux: it is a public header. The FBIO_WAITFORVSYNC ioctl is now also defined in the ivtvfb.h header, no more need to include matroxfb.h for just this ioctl. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6118): ivtv-fb: add missing FBIO_WAITFORVSYNC ioctl defineHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6088): cx2341x: some controls can't be changed while the device is busyHans Verkuil
The driver should now pass the 'busy' state of the device to the cx2341x module whenever controls are set or tried. -EBUSY will be returned if the device is busy and the user attempts to modify certain 'dangerous' controls. It concerns controls that change the audio or video compression mode and bitrates. The cx88-blackbird and pvrusb2 drivers currently always pass '0' (not busy) to the cx2341x, effectively keeping the old behavior for now. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5978): tuner: Better tuner radio supportTrent Piepho
Add radio support for the Thomson DTT7612 tuner. This tuner uses a different 1st intermediate frequency than the other radio tuners supported (a lot of NTSC radio tuners probably need this change too). Add a new tuner-simple parameter, radio_if. It selects the 1st IF used for radio reception. The radio frequency setting code in tuner-simple now uses this field, instead of a special case select() block for each tuner with radio support. The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1 in tuner-types.c. The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and fm_gain_normal = 1. Add some defines for tda9887 bits that control IF setting in radio mode. Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz radio IF. Fix the way tda9887 radio options work. The driver was modifying the default radio mode config templates based on the TDA9887_XXXX flags. This means that _all_ tuners would get the same settings. If you had a one tuner than used TDA9887_GAIN_NORMAL and one that didn't, both would get the setting. Now the tda9987 driver just checks if tuner mode is radio and then applies the config settings directly to the data being sent, just like how all the TV mode settings already work. The PLL setting math is made a little more accurate. And a grammar error in a printk is fixed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5934): dvb-ttpci/saa7146: Replace saa7146_i2c_transfer by generic ↵Oliver Endriss
i2c_transfer Convert av7110_v4l.c to use i2c_transfer() instead of saa7146_i2c_transfer(). Make saa7146_i2c_transfer() static. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5929): Add vp27smpx driverHans Verkuil
This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5913): Clean up duplicate includes in include/media/Jesper Juhl
This patch cleans up duplicate includes in include/media/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5905): ivtv-fb: Use proper ioctl valueHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5902): Add ivtv-fb framebuffer driver.Hans Verkuil
Add the ivtv-fb framebuffer driver for cx23415 devices (currently only the Hauppauge PVR-350 cards). This makes it possible to use the On-Screen Display functionality of these cards, either for menus during MPEG playback, or as a console or X display. Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5883): V4L: Fix a compile warning on non-32-bit machines.Sakari Ailus
Fix a compile warning on non-32-bit machines in v4l2-int-device.h. Add internal ioctl interface fallback function for ioctls with one argument. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5862): V4L: Add internal ioctl-like interface.Sakari Ailus
This patch adds an internal ioctl-like interface which can be used in situations where a single Video4Linux device is implemented by multiple device drivers. One master device controls one or more slave devices. The slaves provide Video4Linux ioctl-like interface for the use of the master. Only a handful of ioctls are implemented at the moment. More can (and should) be added as more functionality is required. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-14V4L/DVB (6220a): fix build error for et61x251 driverLinus Torvalds
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5835): saa7146/dvb-ttpci: Fix signedness warnings (gcc 4.1.1, ↵Oliver Endriss
kernel 2.6.22) Fix signedness warnings (gcc 4.1.1, kernel 2.6.22). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5793): Tuner: remove hardware-specific info from public headerMichael Krufky
Move internal structures and debug macros to drivers/media/video/tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5753): Tuner: create struct tuner_operationsMichael Krufky
Move tuner callback function pointers out of struct tuner, into struct tuner_operations. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5741): Tuner: add release callbackMichael Krufky
Individual tuner drivers are now allocating memory themselves for their own private data structures. This changeset adds a release callback to the tuner operations, so that newer drivers that may require more complex data structures may release this private data themselves. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5719): Tuner: Move device-specific private data out of tuner structMichael Krufky
Create private data struct for device specific private data. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5563a): Add experimental support for tea5761 tunerMauro Carvalho Chehab
This driver were made based on tea5761 specs. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-09V4L/DVB (5592): DMA: Correctly free resources on error, sync PCI streamed dataJon Burgess
I added saa7146_vmalloc_destroy_pgtable() which frees the resources allocated by saa7146_vmalloc_build_pgtable() and updated the callers in budget-core.c and av7110.c. I have also been through the updated functions and updated the error paths to ensure they free all allocated resources on error. I also realised that there are other callers to saa7146_pgtable_free() which did not have any sg DMA mapped so it seems wrong to add the pci_unmap_sg() into that function. Instead I created saa7146_vmalloc_destroy_pgtable() to do this. Also included in this patch are the previous fixes for pci_unmap_sg() and syncing the PCI streamed data to work with a SWIOTLB and match the requirements documented in DMA-API.txt. Signed-off-by: Jon Burgess <jburgess777@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-09V4L/DVB (5591): Saa7146: proper prototype for saa7146_video_do_ioctl()Adrian Bunk
This patch adds a proper prototype for saa7146_video_do_ioctl() in include/media/saa7146_vv.h. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-01i2c: Cleanup the includes of <linux/i2c.h>Jean Delvare
Clean up the includes of <linux/i2c.h>. Only include this header file when we actually need it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-04-27V4L/DVB (5355): Add VIDIOC_G_CHIP_IDENT to various i2c modulesHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoderHans Verkuil
It took three core maintainers, over four years of work, eight new i2c modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac support from Axel Thimm, (hardware) support from Hauppauge, support and assistance from the v4l-dvb people and the many, many users of ivtv to finally make it possible to merge this driver into the kernel. Thank you all! Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5341): Add cx23415/6 chip idents.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-22 06:05:48 +0000