summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-11-17Merge tag 'v5.4.77' into toradex_5.4.yIgor Opaniuk
This is the 5.4.77 stable release
2020-11-13Merge tag 'v5.4.74' into toradex_5.4.yIgor Opaniuk
This is the 5.4.74 stable release
2020-11-10PM: runtime: Drop pm_runtime_clean_up_links()Rafael J. Wysocki
commit d6e36668598154820177bfd78c1621d8e6c580a2 upstream. After commit d12544fb2aa9 ("PM: runtime: Remove link state checks in rpm_get/put_supplier()") nothing prevents the consumer device's runtime PM from acquiring additional references to the supplier device after pm_runtime_clean_up_links() has run (or even while it is running), so calling this function from __device_release_driver() may be pointless (or even harmful). Moreover, it ignores stateless device links, so the runtime PM handling of managed and stateless device links is inconsistent because of it, so better get rid of it entirely. Fixes: d12544fb2aa9 ("PM: runtime: Remove link state checks in rpm_get/put_supplier()") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10PM: runtime: Drop runtime PM references to supplier on link removalRafael J. Wysocki
commit e0e398e204634db8fb71bd89cf2f6e3e5bd09b51 upstream. While removing a device link, drop the supplier device's runtime PM usage counter as many times as needed to drop all of the runtime PM references to it from the consumer in addition to dropping the consumer's link count. Fixes: baa8809f6097 ("PM / runtime: Optimize the use of device links") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10mm: always have io_remap_pfn_range() set pgprot_decrypted()Jason Gunthorpe
commit f8f6ae5d077a9bdaf5cbf2ac960a5d1a04b47482 upstream. The purpose of io_remap_pfn_range() is to map IO memory, such as a memory mapped IO exposed through a PCI BAR. IO devices do not understand encryption, so this memory must always be decrypted. Automatically call pgprot_decrypted() as part of the generic implementation. This fixes a bug where enabling AMD SME causes subsystems, such as RDMA, using io_remap_pfn_range() to expose BAR pages to user space to fail. The CPU will encrypt access to those BAR pages instead of passing unencrypted IO directly to the device. Places not mapping IO should use remap_pfn_range(). Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Dave Young" <dyoung@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/0-v1-025d64bdf6c4+e-amd_sme_fix_jgg@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10linkage: Introduce new macros for assembler symbolsJiri Slaby
commit ffedeeb780dc554eff3d3b16e6a462a26a41d7ec upstream. Introduce new C macros for annotations of functions and data in assembly. There is a long-standing mess in macros like ENTRY, END, ENDPROC and similar. They are used in different manners and sometimes incorrectly. So introduce macros with clear use to annotate assembly as follows: a) Support macros for the ones below SYM_T_FUNC -- type used by assembler to mark functions SYM_T_OBJECT -- type used by assembler to mark data SYM_T_NONE -- type used by assembler to mark entries of unknown type They are defined as STT_FUNC, STT_OBJECT, and STT_NOTYPE respectively. According to the gas manual, this is the most portable way. I am not sure about other assemblers, so this can be switched back to %function and %object if this turns into a problem. Architectures can also override them by something like ", @function" if they need. SYM_A_ALIGN, SYM_A_NONE -- align the symbol? SYM_L_GLOBAL, SYM_L_WEAK, SYM_L_LOCAL -- linkage of symbols b) Mostly internal annotations, used by the ones below SYM_ENTRY -- use only if you have to (for non-paired symbols) SYM_START -- use only if you have to (for paired symbols) SYM_END -- use only if you have to (for paired symbols) c) Annotations for code SYM_INNER_LABEL_ALIGN -- only for labels in the middle of code SYM_INNER_LABEL -- only for labels in the middle of code SYM_FUNC_START_LOCAL_ALIAS -- use where there are two local names for one function SYM_FUNC_START_ALIAS -- use where there are two global names for one function SYM_FUNC_END_ALIAS -- the end of LOCAL_ALIASed or ALIASed function SYM_FUNC_START -- use for global functions SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment SYM_FUNC_START_LOCAL -- use for local functions SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o alignment SYM_FUNC_START_WEAK -- use for weak functions SYM_FUNC_START_WEAK_NOALIGN -- use for weak functions, w/o alignment SYM_FUNC_END -- the end of SYM_FUNC_START_LOCAL, SYM_FUNC_START, SYM_FUNC_START_WEAK, ... For functions with special (non-C) calling conventions: SYM_CODE_START -- use for non-C (special) functions SYM_CODE_START_NOALIGN -- use for non-C (special) functions, w/o alignment SYM_CODE_START_LOCAL -- use for local non-C (special) functions SYM_CODE_START_LOCAL_NOALIGN -- use for local non-C (special) functions, w/o alignment SYM_CODE_END -- the end of SYM_CODE_START_LOCAL or SYM_CODE_START d) For data SYM_DATA_START -- global data symbol SYM_DATA_START_LOCAL -- local data symbol SYM_DATA_END -- the end of the SYM_DATA_START symbol SYM_DATA_END_LABEL -- the labeled end of SYM_DATA_START symbol SYM_DATA -- start+end wrapper around simple global data SYM_DATA_LOCAL -- start+end wrapper around simple local data ========== The macros allow to pair starts and ends of functions and mark functions correctly in the output ELF objects. All users of the old macros in x86 are converted to use these in further patches. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20191011115108.12392-2-jslaby@suse.cz Cc: Jian Cai <jiancai@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05hil/parisc: Disable HIL driver when it gets stuckHelge Deller
commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream. When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flagOlga Kornievskaia
commit 8c39076c276be0b31982e44654e2c2357473258a upstream. RFC 7862 introduced a new flag that either client or server is allowed to set: EXCHGID4_FLAG_SUPP_FENCE_OPS. Client needs to update its bitmask to allow for this flag value. v2: changed minor version argument to unsigned int Signed-off-by: Olga Kornievskaia <kolga@netapp.com> CC: <stable@vger.kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05btrfs: tree-checker: fix false alert caused by legacy btrfs root itemQu Wenruo
commit 1465af12e254a68706e110846f59cf0f09683184 upstream. Commit 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check") introduced btrfs root item size check, however btrfs root item has two versions, the legacy one which just ends before generation_v2 member, is smaller than current btrfs root item size. This caused btrfs kernel to reject valid but old tree root leaves. Fix this problem by also allowing legacy root item, since kernel can already handle them pretty well and upgrade to newer root item format when needed. Reported-by: Martin Steigerwald <martin@lichtvoll.de> Fixes: 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check") CC: stable@vger.kernel.org # 5.4+ Tested-By: Martin Steigerwald <martin@lichtvoll.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05usb: typec: tcpm: During PR_SWAP, source caps should be sent only after ↵Badhri Jagan Sridharan
tSwapSourceStart [ Upstream commit 6bbe2a90a0bb4af8dd99c3565e907fe9b5e7fd88 ] The patch addresses the compliance test failures while running TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 of the "Deterministic PD Compliance MOI" test plan published in https://www.usb.org/usbc. For a product to be Type-C compliant, it's expected that these tests are run on usb.org certified Type-C compliance tester as mentioned in https://www.usb.org/usbc. The purpose of the tests TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 is to verify the PR_SWAP response of the device. While doing so, the test asserts that Source Capabilities message is NOT received from the test device within tSwapSourceStart min (20 ms) from the time the last bit of GoodCRC corresponding to the RS_RDY message sent by the UUT was sent. If it does then the test fails. This is in line with the requirements from the USB Power Delivery Specification Revision 3.0, Version 1.2: "6.6.8.1 SwapSourceStartTimer The SwapSourceStartTimer Shall be used by the new Source, after a Power Role Swap or Fast Role Swap, to ensure that it does not send Source_Capabilities Message before the new Sink is ready to receive the Source_Capabilities Message. The new Source Shall Not send the Source_Capabilities Message earlier than tSwapSourceStart after the last bit of the EOP of GoodCRC Message sent in response to the PS_RDY Message sent by the new Source indicating that its power supply is ready." The patch makes sure that TCPM does not send the Source_Capabilities Message within tSwapSourceStart(20ms) by transitioning into SRC_STARTUP only after tSwapSourceStart(20ms). Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200817183828.1895015-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05media: videodev2.h: RGB BT2020 and HSV are always full rangeHans Verkuil
[ Upstream commit b305dfe2e93434b12d438434461b709641f62af4 ] The default RGB quantization range for BT.2020 is full range (just as for all the other RGB pixel encodings), not limited range. Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation accordingly. Also mention that HSV is always full range and cannot be limited range. When RGB BT2020 was introduced in V4L2 it was not clear whether it should be limited or full range, but full range is the right (and consistent) choice. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05xen/events: add a new "late EOI" evtchn frameworkJuergen Gross
commit 54c9de89895e0a36047fcc4ae754ea5b8655fb9d upstream. In order to avoid tight event channel related IRQ loops add a new framework of "late EOI" handling: the IRQ the event channel is bound to will be masked until the event has been handled and the related driver is capable to handle another event. The driver is responsible for unmasking the event channel via the new function xen_irq_lateeoi(). This is similar to binding an event channel to a threaded IRQ, but without having to structure the driver accordingly. In order to support a future special handling in case a rogue guest is sending lots of unsolicited events, add a flag to xen_irq_lateeoi() which can be set by the caller to indicate the event was a spurious one. This is part of XSA-332. Cc: stable@vger.kernel.org Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01PM: runtime: Fix timer_expires data type on 32-bit archesGrygorii Strashko
commit 6b61d49a55796dbbc479eeb4465e59fd656c719c upstream. Commit 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers") switched PM runtime autosuspend to use hrtimers and all related time accounting in ns, but missed to update the timer_expires data type in struct dev_pm_info to u64. This causes the timer_expires value to be truncated on 32-bit architectures when assignment is done from u64 values: rpm_suspend() |- dev->power.timer_expires = expires; Fix it by changing the timer_expires type to u64. Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: 5.0+ <stable@vger.kernel.org> # 5.0+ [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01serial: qcom_geni_serial: To correct QUP Version detection logicParas Sharma
commit c9ca43d42ed8d5fd635d327a664ed1d8579eb2af upstream. For QUP IP versions 2.5 and above the oversampling rate is halved from 32 to 16. Commit ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate") is pushed to handle this scenario. But the existing logic is failing to classify QUP Version 3.0 into the correct group ( 2.5 and above). As result Serial Engine clocks are not configured properly for baud rate and garbage data is sampled to FIFOs from the line. So, fix the logic to detect QUP with versions 2.5 and above. Fixes: ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate") Cc: stable <stable@vger.kernel.org> Signed-off-by: Paras Sharma <parashar@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/1601445926-23673-1-git-send-email-parashar@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01mtd: lpddr: Fix bad logic in print_drs_errorGustavo A. R. Silva
commit 1c9c02bb22684f6949d2e7ddc0a3ff364fd5a6fc upstream. Update logic for broken test. Use a more common logging style. It appears the logic in this function is broken for the consecutive tests of if (prog_status & 0x3) ... else if (prog_status & 0x2) ... else (prog_status & 0x1) ... Likely the first test should be if ((prog_status & 0x3) == 0x3) Found by inspection of include files using printk. Fixes: eb3db27507f7 ("[MTD] LPDDR PFOW definition") Cc: stable@vger.kernel.org Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/3fb0e29f5b601db8be2938a01d974b00c8788501.1588016644.git.gustavo@embeddedor.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bpf: Fix comment for helper bpf_current_task_under_cgroup()Song Liu
commit 1aef5b4391f0c75c0a1523706a7b0311846ee12f upstream. This should be "current" not "skb". Fixes: c6b5fb8690fa ("bpf: add documentation for eBPF helpers (42-50)") Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/bpf/20200910203314.70018-1-songliubraving@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01netfilter: nftables_offload: KASAN slab-out-of-bounds Read in ↵Saeed Mirzamohammadi
nft_flow_rule_create commit 31cc578ae2de19c748af06d859019dced68e325d upstream. This patch fixes the issue due to: BUG: KASAN: slab-out-of-bounds in nft_flow_rule_create+0x622/0x6a2 net/netfilter/nf_tables_offload.c:40 Read of size 8 at addr ffff888103910b58 by task syz-executor227/16244 The error happens when expr->ops is accessed early on before performing the boundary check and after nft_expr_next() moves the expr to go out-of-bounds. This patch checks the boundary condition before expr->ops that fixes the slab-out-of-bounds Read issue. Add nft_expr_more() and use it to fix this problem. Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29dmaengine: dw: Add DMA-channels mask cell supportSerge Semin
[ Upstream commit e8ee6c8cb61b676f1a2d6b942329e98224bd8ee9 ] DW DMA IP-core provides a way to synthesize the DMA controller with channels having different parameters like maximum burst-length, multi-block support, maximum data width, etc. Those parameters both explicitly and implicitly affect the channels performance. Since DMA slave devices might be very demanding to the DMA performance, let's provide a functionality for the slaves to be assigned with DW DMA channels, which performance according to the platform engineer fulfill their requirements. After this patch is applied it can be done by passing the mask of suitable DMA-channels either directly in the dw_dma_slave structure instance or as a fifth cell of the DMA DT-property. If mask is zero or not provided, then there is no limitation on the channels allocation. For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first two channels are synthesized with max burst length of 16, while the rest of the channels have been created with max-burst-len=4. It would seem that the first two channels must be faster than the others and should be more preferable for the time-critical DMA slave devices. In practice it turned out that the situation is quite the opposite. The channels with max-burst-len=4 demonstrated a better performance than the channels with max-burst-len=16 even when they both had been initialized with the same settings. The performance drop of the first two DMA-channels made them unsuitable for the DW APB SSI slave device. No matter what settings they are configured with, full-duplex SPI transfers occasionally experience the Rx FIFO overflow. It means that the DMA-engine doesn't keep up with incoming data pace even though the SPI-bus is enabled with speed of 25MHz while the DW DMA controller is clocked with 50MHz signal. There is no such problem has been noticed for the channels synthesized with max-burst-len=4. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200731200826.9292-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29bpf: Limit caller's stack depth 256 for subprogs with tailcallsMaciej Fijalkowski
[ Upstream commit 7f6e4312e15a5c370e84eaa685879b6bdcc717e4 ] Protect against potential stack overflow that might happen when bpf2bpf calls get combined with tailcalls. Limit the caller's stack depth for such case down to 256 so that the worst case scenario would result in 8k stack size (32 which is tailcall limit * 256 = 8k). Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: target: core: Add CONTROL field for trace eventsRoman Bolshakov
[ Upstream commit 7010645ba7256992818b518163f46bd4cdf8002a ] trace-cmd report doesn't show events from target subsystem because scsi_command_size() leaks through event format string: [target:target_sequencer_start] function scsi_command_size not defined [target:target_cmd_complete] function scsi_command_size not defined Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't help because an expression is used inside TP_printk(). trace-cmd event parser doesn't understand minus sign inside [ ]: Error: expected ']' but read '-' Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated field for CONTROL byte. Link: https://lore.kernel.org/r/20200929125957.83069-1-r.bolshakov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29perf: correct SNOOPX field offsetAl Grant
[ Upstream commit f3d301c1f2f5676465cdf3259737ea19cc82731f ] perf_event.h has macros that define the field offsets in the data_src bitmask in perf records. The SNOOPX and REMOTE offsets were both 37. These are distinct fields, and the bitfield layout in perf_mem_data_src confirms that SNOOPX should be at offset 38. Fixes: 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings") Signed-off-by: Al Grant <al.grant@foss.arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lkml.kernel.org/r/4ac9f5cc-4388-b34a-9999-418a4099415d@foss.arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29PCI/IOV: Mark VFs as not implementing PCI_COMMAND_MEMORYMatthew Rosato
[ Upstream commit 12856e7acde4702b7c3238c15fcba86ff6aa507f ] For VFs, the Memory Space Enable bit in the Command Register is hard-wired to 0. Add a new bit to signify devices where the Command Register Memory Space Enable bit does not control the device's response to MMIO accesses. Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29mm/page_owner: change split_page_owner to take a countMatthew Wilcox (Oracle)
[ Upstream commit 8fb156c9ee2db94f7127c930c89917634a1a9f56 ] The implementation of split_page_owner() prefers a count rather than the old order of the page. When we support a variable size THP, we won't have the order at this point, but we will have the number of pages. So change the interface to what the caller and callee would prefer. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: SeongJae Park <sjpark@amazon.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Link: https://lkml.kernel.org/r/20200908195539.25896-4-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29overflow: Include header file with SIZE_MAX declarationLeon Romanovsky
[ Upstream commit a4947e84f23474803b62a2759b5808147e4e15f9 ] The various array_size functions use SIZE_MAX define, but missed limits.h causes to failure to compile code that needs overflow.h. In file included from drivers/infiniband/core/uverbs_std_types_device.c:6: ./include/linux/overflow.h: In function 'array_size': ./include/linux/overflow.h:258:10: error: 'SIZE_MAX' undeclared (first use in this function) 258 | return SIZE_MAX; | ^~~~~~~~ Fixes: 610b15c50e86 ("overflow.h: Add allocation size calculation helpers") Link: https://lore.kernel.org/r/20200913102928.134985-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29RDMA/umem: Fix signature of stub ib_umem_find_best_pgsz()Jason Gunthorpe
[ Upstream commit 61690d01db32eb1f94adc9ac2b8bb741d34e4671 ] The original function returns unsigned long and 0 on failure. Fixes: 4a35339958f1 ("RDMA/umem: Add API to find best driver supported page size in an MR") Link: https://lore.kernel.org/r/0-v1-982a13cc5c6d+501ae-fix_best_pgsz_stub_jgg@nvidia.com Reviewed-by: Gal Pressman <galpress@amazon.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessarySuren Baghdasaryan
[ Upstream commit 67197a4f28d28d0b073ab0427b03cb2ee5382578 ] Currently __set_oom_adj loops through all processes in the system to keep oom_score_adj and oom_score_adj_min in sync between processes sharing their mm. This is done for any task with more that one mm_users, which includes processes with multiple threads (sharing mm and signals). However for such processes the loop is unnecessary because their signal structure is shared as well. Android updates oom_score_adj whenever a tasks changes its role (background/foreground/...) or binds to/unbinds from a service, making it more/less important. Such operation can happen frequently. We noticed that updates to oom_score_adj became more expensive and after further investigation found out that the patch mentioned in "Fixes" introduced a regression. Using Pixel 4 with a typical Android workload, write time to oom_score_adj increased from ~3.57us to ~362us. Moreover this regression linearly depends on the number of multi-threaded processes running on the system. Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj update should be synchronized between multiple processes. To prevent races between clone() and __set_oom_adj(), when oom_score_adj of the process being cloned might be modified from userspace, we use oom_adj_mutex. Its scope is changed to global. The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for the case of vfork(). To prevent performance regressions of vfork(), we skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is specified. Clearing the MMF_MULTIPROCESS flag (when the last process sharing the mm exits) is left out of this patch to keep it simple and because it is believed that this threading model is rare. Should there ever be a need for optimizing that case as well, it can be done by hooking into the exit path, likely following the mm_update_next_owner pattern. With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being quite rare, the regression is gone after the change is applied. [surenb@google.com: v3] Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") Reported-by: Tim Murray <timmurray@google.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Christian Kellner <christian@kellner.me> Cc: Adrian Reber <areber@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: John Johansen <john.johansen@canonical.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com Debugged-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29netfilter: nf_log: missing vlan offload tag and protoPablo Neira Ayuso
[ Upstream commit 0d9826bc18ce356e8909919ad681ad65d0a6061e ] Dump vlan tag and proto for the usual vlan offload case if the NF_LOG_MACDECODE flag is set on. Without this information the logging is misleading as there is no reference to the VLAN header. [12716.993704] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0800 SRC=192.168.10.2 DST=172.217.168.163 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2548 DF PROTO=TCP SPT=55848 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 [12721.157643] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0806 ARP HTYPE=1 PTYPE=0x0800 OPCODE=2 MACSRC=86:6c:92:ea:d6:73 IPSRC=192.168.10.2 MACDST=0e:3b:eb:86:73:76 IPDST=192.168.10.1 Fixes: 83e96d443b37 ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ALSA: hda: fix jack detection with Realtek codecs when in D3Kai Vehmanen
commit a6e7d0a4bdb02a7a3ffe0b44aaa8842b7efdd056 upstream. In case HDA controller becomes active, but codec is runtime suspended, jack detection is not successful and no interrupt is raised. This has been observed with multiple Realtek codecs and HDA controllers from different vendors. Bug does not occur if both codec and controller are active, or both are in suspend. Bug can be easily hit on desktop systems with no built-in speaker. The problem can be fixed by powering up the codec once after every controller runtime resume. Even if codec goes back to suspend later, the jack detection will continue to work. Add a flag to 'hda_codec' to describe codecs that require this flow from the controller driver. Modify __azx_runtime_resume() to use pm_request_resume() to make the intent clearer. Mark all Realtek codecs with the new forced_resume flag. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209379 Cc: Kailang Yang <kailang@realtek.com> Co-developed-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201012102704.794423-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29net/ipv4: always honour route mtu during forwardingMaciej Żenczykowski
[ Upstream commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0 ] Documentation/networking/ip-sysctl.txt:46 says: ip_forward_use_pmtu - BOOLEAN By default we don't trust protocol path MTUs while forwarding because they could be easily forged and can lead to unwanted fragmentation by the router. You only need to enable this if you have user-space software which tries to discover path mtus by itself and depends on the kernel honoring this information. This is normally not the case. Default: 0 (disabled) Possible values: 0 - disabled 1 - enabled Which makes it pretty clear that setting it to 1 is a potential security/safety/DoS issue, and yet it is entirely reasonable to want forwarded traffic to honour explicitly administrator configured route mtus (instead of defaulting to device mtu). Indeed, I can't think of a single reason why you wouldn't want to. Since you configured a route mtu you probably know better... It is pretty common to have a higher device mtu to allow receiving large (jumbo) frames, while having some routes via that interface (potentially including the default route to the internet) specify a lower mtu. Note that ipv6 forwarding uses device mtu unless the route is locked (in which case it will use the route mtu). This approach is not usable for IPv4 where an 'mtu lock' on a route also has the side effect of disabling TCP path mtu discovery via disabling the IPv4 DF (don't frag) bit on all outgoing frames. I'm not aware of a way to lock a route from an IPv6 RA, so that also potentially seems wrong. Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Sunmeet Gill (Sunny) <sgill@quicinc.com> Cc: Vinay Paradkar <vparadka@qti.qualcomm.com> Cc: Tyler Wear <twear@quicinc.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-17Bluetooth: Disconnect if E0 is used for Level 4Luiz Augusto von Dentz
commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream. E0 is not allowed with Level 4: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319: '128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened' SC enabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) Secure Connections (Host Support) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with AES-CCM (0x02) SC disabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with E0 (0x01) [May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 256 Reason: Authentication Failure (0x05) Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-17Bluetooth: Fix update of connection state in `hci_encrypt_cfm`Patrick Steinhardt
commit 339ddaa626995bc6218972ca241471f3717cc5f4 upstream. Starting with the upgrade to v5.8-rc3, I've noticed I wasn't able to connect to my Bluetooth headset properly anymore. While connecting to the device would eventually succeed, bluetoothd seemed to be confused about the current connection state where the state was flapping hence and forth. Bisecting this issue led to commit 3ca44c16b0dc (Bluetooth: Consolidate encryption handling in hci_encrypt_cfm, 2020-05-19), which refactored `hci_encrypt_cfm` to also handle updating the connection state. The commit in question changed the code to call `hci_connect_cfm` inside `hci_encrypt_cfm` and to change the connection state. But with the conversion, we now only update the connection state if a status was set already. In fact, the reverse should be true: the status should be updated if no status is yet set. So let's fix the isuse by reversing the condition. Fixes: 3ca44c16b0dc ("Bluetooth: Consolidate encryption handling in hci_encrypt_cfm") Signed-off-by: Patrick Steinhardt <ps@pks.im> Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-17Bluetooth: Consolidate encryption handling in hci_encrypt_cfmLuiz Augusto von Dentz
commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream. This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection state is BT_CONFIG so callers don't have to check the state. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-17Bluetooth: L2CAP: Fix calling sk_filter on non-socket based channelLuiz Augusto von Dentz
commit f19425641cb2572a33cb074d5e30283720bd4d22 upstream. Only sockets will have the chan->data set to an actual sk, channels like A2MP would have its own data which would likely cause a crash when calling sk_filter, in order to fix this a new callback has been introduced so channels can implement their own filtering if necessary. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14net_sched: defer tcf_idr_insert() in tcf_action_init_1()Cong Wang
commit e49d8c22f1261c43a986a7fdbf677ac309682a07 upstream. All TC actions call tcf_idr_insert() for new action at the end of their ->init(), so we can actually move it to a central place in tcf_action_init_1(). And once the action is inserted into the global IDR, other parallel process could free it immediately as its refcnt is still 1, so we can not fail after this, we need to move it after the goto action validation to avoid handling the failure case after insertion. This is found during code review, is not directly triggered by syzbot. And this prepares for the next patch. Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14mm: khugepaged: recalculate min_free_kbytes after memory hotplug as expected ↵Vijay Balakrishna
by khugepaged commit 4aab2be0983031a05cb4a19696c9da5749523426 upstream. When memory is hotplug added or removed the min_free_kbytes should be recalculated based on what is expected by khugepaged. Currently after hotplug, min_free_kbytes will be set to a lower default and higher default set when THP enabled is lost. This change restores min_free_kbytes as expected for THP consumers. [vijayb@linux.microsoft.com: v5] Link: https://lkml.kernel.org/r/1601398153-5517-1-git-send-email-vijayb@linux.microsoft.com Fixes: f000565adb77 ("thp: set recommended min free kbytes") Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Allen Pais <apais@microsoft.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1600305709-2319-2-git-send-email-vijayb@linux.microsoft.com Link: https://lkml.kernel.org/r/1600204258-13683-1-git-send-email-vijayb@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14net/mlx5: Avoid possible free of command entry while timeout comp handlerEran Ben Elisha
[ Upstream commit 50b2412b7e7862c5af0cbf4b10d93bc5c712d021 ] Upon command completion timeout, driver simulates a forced command completion. In a rare case where real interrupt for that command arrives simultaneously, it might release the command entry while the forced handler might still access it. Fix that by adding an entry refcount, to track current amount of allowed handlers. Command entry to be released only when this refcount is decremented to zero. Command refcount is always initialized to one. For callback commands, command completion handler is the symmetric flow to decrement it. For non-callback commands, it is wait_func(). Before ringing the doorbell, increment the refcount for the real completion handler. Once the real completion handler is called, it will decrement it. For callback commands, once the delayed work is scheduled, increment the refcount. Upon callback command completion handler, we will try to cancel the timeout callback. In case of success, we need to decrement the callback refcount as it will never run. In addition, gather the entry index free and the entry free into a one flow for all command types release. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14xfrm: clone XFRMA_REPLAY_ESN_VAL in xfrm_do_migrateAntony Antony
[ Upstream commit 91a46c6d1b4fcbfa4773df9421b8ad3e58088101 ] XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new. Migrate this attribute during XFRMA_MSG_MIGRATE v1->v2: - move curleft cloning to a separate patch Fixes: af2f464e326e ("xfrm: Assign esn pointers when cloning a state") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14net: introduce helper sendpage_ok() in include/linux/net.hColy Li
commit c381b07941adc2274ce552daf86c94701c5e265a upstream. The original problem was from nvme-over-tcp code, who mistakenly uses kernel_sendpage() to send pages allocated by __get_free_pages() without __GFP_COMP flag. Such pages don't have refcount (page_count is 0) on tail pages, sending them by kernel_sendpage() may trigger a kernel panic from a corrupted kernel heap, because these pages are incorrectly freed in network stack as page_count 0 pages. This patch introduces a helper sendpage_ok(), it returns true if the checking page, - is not slab page: PageSlab(page) is false. - has page refcount: page_count(page) is not zero All drivers who want to send page to remote end by kernel_sendpage() may use this helper to check whether the page is OK. If the helper does not return true, the driver should try other non sendpage method (e.g. sock_no_sendpage()) to handle the page. Signed-off-by: Coly Li <colyli@suse.de> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Vlastimil Babka <vbabka@suse.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14bpf: Prevent .BTF section eliminationTony Ambardar
commit 65c204398928f9c79f1a29912b410439f7052635 upstream. Systems with memory or disk constraints often reduce the kernel footprint by configuring LD_DEAD_CODE_DATA_ELIMINATION. However, this can result in removal of any BTF information. Use the KEEP() macro to preserve the BTF data as done with other important sections, while still allowing for smaller kernels. Fixes: 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF") Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/a635b5d3e2da044e7b51ec1315e8910fbce0083f.1600417359.git.Tony.Ambardar@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14Fonts: Support FONT_EXTRA_WORDS macros for built-in fontsPeilin Ye
commit 6735b4632def0640dbdf4eb9f99816aca18c4f16 upstream. syzbot has reported an issue in the framebuffer layer, where a malicious user may overflow our built-in font data buffers. In order to perform a reliable range check, subsystems need to know `FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor, `struct console_font` does not contain `FONTDATAMAX`, and is part of the UAPI, making it infeasible to modify it. For user-provided fonts, the framebuffer layer resolves this issue by reserving four extra words at the beginning of data buffers. Later, whenever a function needs to access them, it simply uses the following macros: Recently we have gathered all the above macros to <linux/font.h>. Let us do the same thing for built-in fonts, prepend four extra words (including `FONTDATAMAX`) to their data buffers, so that subsystems can use these macros for all fonts, no matter built-in or user-provided. This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h". Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.hPeilin Ye
commit bb0890b4cd7f8203e3aa99c6d0f062d6acdaad27 upstream. drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all definitions into <linux/font.h>. Since newport_con now uses four extra words, initialize the fourth word in newport_set_font() properly. Cc: stable@vger.kernel.org Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/7fb8bc9b0abc676ada6b7ac0e0bd443499357267.1600953813.git.yepeilin.cs@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07mm: don't rely on system state to detect hot-plug operationsLaurent Dufour
commit f85086f95fa36194eb0db5cd5c12e56801b98523 upstream. In register_mem_sect_under_node() the system_state's value is checked to detect whether the call is made during boot time or during an hot-plug operation. Unfortunately, that check against SYSTEM_BOOTING is wrong because regular memory is registered at SYSTEM_SCHEDULING state. In addition, memory hot-plug operation can be triggered at this system state by the ACPI [1]. So checking against the system state is not enough. The consequence is that on system with interleaved node's ranges like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] This can be seen on PowerPC LPAR after multiple memory hot-plug and hot-unplug operations are done. At the next reboot the node's memory ranges can be interleaved and since the call to link_mem_sections() is made in topology_init() while the system is in the SYSTEM_SCHEDULING state, the node's id is not checked, and the sections registered to multiple nodes: $ ls -l /sys/devices/system/memory/memory21/node* total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 In that case, the system is able to boot but if later one of theses memory blocks is hot-unplugged and then hot-plugged, the sysfs inconsistency is detected and this is triggering a BUG_ON(): kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This patch addresses the root cause by not relying on the system_state value to detect whether the call is due to a hot-plug operation. An extra parameter is added to link_mem_sections() detailing whether the operation is due to a hot-plug operation. [1] According to Oscar Salvador, using this qemu command line, ACPI memory hotplug operations are raised at SYSTEM_SCHEDULING state: $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \ -m size=$MEM,slots=255,maxmem=4294967296k \ -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \ -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \ -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \ -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \ -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \ -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \ -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \ -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \ Fixes: 4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07mm: replace memmap_context by meminit_contextLaurent Dufour
commit c1d0da83358a2316d9be7f229f26126dbaa07468 upstream. Patch series "mm: fix memory to node bad links in sysfs", v3. Sometimes, firmware may expose interleaved memory layout like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] In that case, we can see memory blocks assigned to multiple nodes in sysfs: $ ls -l /sys/devices/system/memory/memory21 total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 -rw-r--r-- 1 root root 65536 Aug 24 05:27 online -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index drwxr-xr-x 2 root root 0 Aug 24 05:27 power -r--r--r-- 1 root root 65536 Aug 24 05:27 removable -rw-r--r-- 1 root root 65536 Aug 24 05:27 state lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones The same applies in the node's directory with a memory21 link in both the node1 and node2's directory. This is wrong but doesn't prevent the system to run. However when later, one of these memory blocks is hot-unplugged and then hot-plugged, the system is detecting an inconsistency in the sysfs layout and a BUG_ON() is raised: kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This has been seen on PowerPC LPAR. The root cause of this issue is that when node's memory is registered, the range used can overlap another node's range, thus the memory block is registered to multiple nodes in sysfs. There are two issues here: (a) The sysfs memory and node's layouts are broken due to these multiple links (b) The link errors in link_mem_sections() should not lead to a system panic. To address (a) register_mem_sect_under_node should not rely on the system state to detect whether the link operation is triggered by a hot plug operation or not. This is addressed by the patches 1 and 2 of this series. Issue (b) will be addressed separately. This patch (of 2): The memmap_context enum is used to detect whether a memory operation is due to a hot-add operation or happening at boot time. Make it general to the hotplug operation and rename it as meminit_context. There is no functional change introduced by this patch Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07block/diskstats: more accurate approximation of io_ticks for slow disksKonstantin Khlebnikov
commit 2b8bd423614c595540eaadcfbc702afe8e155e50 upstream. Currently io_ticks is approximated by adding one at each start and end of requests if jiffies counter has changed. This works perfectly for requests shorter than a jiffy or if one of requests starts/ends at each jiffy. If disk executes just one request at a time and they are longer than two jiffies then only first and last jiffies will be accounted. Fix is simple: at the end of request add up into io_ticks jiffies passed since last update rather than just one jiffy. Example: common HDD executes random read 4k requests around 12ms. fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 & iostat -x 10 sdb Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch: Before: Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0,00 0,00 82,60 0,00 330,40 0,00 8,00 0,96 12,09 12,09 0,00 1,02 8,43 After: Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0,00 0,00 82,50 0,00 330,00 0,00 8,00 1,00 12,10 12,10 0,00 12,12 99,99 Now io_ticks does not loose time between start and end of requests, but for queue-depth > 1 some I/O time between adjacent starts might be lost. For load estimation "%util" is not as useful as average queue length, but it clearly shows how often disk queue is completely empty. Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> From: "Banerjee, Debabrata" <dbanerje@akamai.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07memstick: Skip allocating card when removing hostKai-Heng Feng
commit 62c59a8786e6bb75569cee91dab66e9da3ff4b68 upstream. After commit 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management"), removing module rtsx_usb_ms will be stuck. The deadlock is caused by powering on and powering off at the same time, the former one is when memstick_check() is flushed, and the later is called by memstick_remove_host(). Soe let's skip allocating card to prevent this issue. Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200925084952.13220-1-kai.heng.feng@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()Stefano Garzarella
[ Upstream commit 4c7246dc45e2706770d5233f7ce1597a07e069ba ] We are going to add 'struct vsock_sock *' parameter to virtio_transport_get_ops(). In some cases, like in the virtio_transport_reset_no_sock(), we don't have any socket assigned to the packet received, so we can't use the virtio_transport_get_ops(). In order to allow virtio_transport_reset_no_sock() to use the '.send_pkt' callback from the 'vhost_transport' or 'virtio_transport', we add the 'struct virtio_transport *' to it and to its caller: virtio_transport_recv_pkt(). We moved the 'vhost_transport' and 'virtio_transport' definition, to pass their address to the virtio_transport_recv_pkt(). Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ata: make qc_prep return ata_completion_errorsJiri Slaby
commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream. In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK. [v2] use enum ata_completion_errors and AC_ERR_OK. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01ata: define AC_ERR_OKJiri Slaby
commit 25937580a5065d6fbd92d9c8ebd47145ad80052e upstream. Since we will return enum ata_completion_errors from qc_prep in the next patch, let's define AC_ERR_OK to mark the OK status. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01mm/gup: fix gup_fast with dynamic page table foldingVasily Gorbik
commit d3f7b1bb204099f2f7306318896223e8599bb6a2 upstream. Currently to make sure that every page table entry is read just once gup_fast walks perform READ_ONCE and pass pXd value down to the next gup_pXd_range function by value e.g.: static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) ... pudp = pud_offset(&p4d, addr); This function passes a reference on that local value copy to pXd_offset, and might get the very same pointer in return. This happens when the level is folded (on most arches), and that pointer should not be iterated. On s390 due to the fact that each task might have different 5,4 or 3-level address translation and hence different levels folded the logic is more complex and non-iteratable pointer to a local copy leads to severe problems. Here is an example of what happens with gup_fast on s390, for a task with 3-level paging, crossing a 2 GB pud boundary: // addr = 0x1007ffff000, end = 0x10080001000 static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) { unsigned long next; pud_t *pudp; // pud_offset returns &p4d itself (a pointer to a value on stack) pudp = pud_offset(&p4d, addr); do { // on second iteratation reading "random" stack value pud_t pud = READ_ONCE(*pudp); // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390 next = pud_addr_end(addr, end); ... } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack return 1; } This happens since s390 moved to common gup code with commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code"). s390 tried to mimic static level folding by changing pXd_offset primitives to always calculate top level page table offset in pgd_offset and just return the value passed when pXd_offset has to act as folded. What is crucial for gup_fast and what has been overlooked is that PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly. And the latter is not possible with dynamic folding. To fix the issue in addition to pXd values pass original pXdp pointers down to gup_pXd_range functions. And introduce pXd_offset_lockless helpers, which take an additional pXd entry value parameter. This has already been discussed in https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1 Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.2+] Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01kprobes: tracing/kprobes: Fix to kill kprobes on initmem after bootMasami Hiramatsu
commit 82d083ab60c3693201c6f5c7a5f23a6ed422098d upstream. Since kprobe_event= cmdline option allows user to put kprobes on the functions in initmem, kprobe has to make such probes gone after boot. Currently the probes on the init functions in modules will be handled by module callback, but the kernel init text isn't handled. Without this, kprobes may access non-exist text area to disable or remove it. Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2 Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter") Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-13 12:26:17 +0000