summaryrefslogtreecommitdiff
path: root/init
AgeCommit message (Collapse)Author
2015-08-07fs, file table: reinit files_stat.max_files after deferred memory initialisationMel Gorman
Dave Hansen reported the following; My laptop has been behaving strangely with 4.2-rc2. Once I log in to my X session, I start getting all kinds of strange errors from applications and see this in my dmesg: VFS: file-max limit 8192 reached The problem is that the file-max is calculated before memory is fully initialised and miscalculates how much memory the kernel is using. This patch recalculates file-max after deferred memory initialisation. Note that using memory hotplug infrastructure would not have avoided this problem as the value is not recalculated after memory hot-add. 4.1: files_stat.max_files = 6582781 4.2-rc2: files_stat.max_files = 8192 4.2-rc2 patched: files_stat.max_files = 6562467 Small differences with the patch applied and 4.1 but not enough to matter. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Dave Hansen <dave.hansen@intel.com> Cc: Nicolai Stange <nicstange@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Alex Ng <alexng@microsoft.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-04Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Debug info and other statistics fixes and related enhancements" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/numa: Fix numa balancing stats in /proc/pid/sched sched/numa: Show numa_group ID in /proc/sched_debug task listings sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.h sched/stat: Expose /proc/pid/schedstat if CONFIG_SCHED_INFO=y sched/stat: Simplify the sched_info accounting dependency
2015-07-04Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull max log buf size increase from Ingo Molnar: "Ran into this limit recently, so increase it by an order of magnitude" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: printk: Increase maximum CONFIG_LOG_BUF_SHIFT from 21 to 25
2015-07-04sched/stat: Simplify the sched_info accounting dependencyNaveen N. Rao
Both CONFIG_SCHEDSTATS=y and CONFIG_TASK_DELAY_ACCT=y track task sched_info, which results in ugly #if clauses. Simplify the code by introducing a synthethic CONFIG_SCHED_INFO switch, selected by both. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Cc: ricklind@us.ibm.com Link: http://lkml.kernel.org/r/8d19eef800811a94b0f91bcbeb27430a884d7433.1435255405.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-01Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge third patchbomb from Andrew Morton: - the rest of MM - scripts/gdb updates - ipc/ updates - lib/ updates - MAINTAINERS updates - various other misc things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits) genalloc: rename of_get_named_gen_pool() to of_gen_pool_get() genalloc: rename dev_get_gen_pool() to gen_pool_get() x86: opt into HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit MAINTAINERS: add zpool MAINTAINERS: BCACHE: Kent Overstreet has changed email address MAINTAINERS: move Jens Osterkamp to CREDITS MAINTAINERS: remove unused nbd.h pattern MAINTAINERS: update brcm gpio filename pattern MAINTAINERS: update brcm dts pattern MAINTAINERS: update sound soc intel patterns MAINTAINERS: remove website for paride MAINTAINERS: update Emulex ocrdma email addresses bcache: use kvfree() in various places libcxgbi: use kvfree() in cxgbi_free_big_mem() target: use kvfree() in session alloc and free IB/ehca: use kvfree() in ipz_queue_{cd}tor() drm/nouveau/gem: use kvfree() in u_free() drm: use kvfree() in drm_free_large() cxgb4: use kvfree() in t4_free_mem() cxgb3: use kvfree() in cxgb_free_mem() ...
2015-07-01Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...
2015-07-01printk: Increase maximum CONFIG_LOG_BUF_SHIFT from 21 to 25Ingo Molnar
So I tried to some kernel debugging that produced a ton of kernel messages on a big box, and wanted to save them all: but CONFIG_LOG_BUF_SHIFT maxes out at 21 (2 MB). Increase it to 25 (32 MB). This does not affect any existing config or defaults. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-30mm: meminit: finish initialisation of struct pages before basic setupMel Gorman
Waiman Long reported that 24TB machines hit OOM during basic setup when struct page initialisation was deferred. One approach is to initialise memory on demand but it interferes with page allocator paths. This patch creates dedicated threads to initialise memory before basic setup. It then blocks on a rw_semaphore until completion as a wait_queue and counter is overkill. This may be slower to boot but it's simplier overall and also gets rid of a section mangling which existed so kswapd could do the initialisation. [akpm@linux-foundation.org: include rwsem.h, use DECLARE_RWSEM, fix comment, remove unneeded cast] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Waiman Long <waiman.long@hp.com Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Scott Norton <scott.norton@hp.com> Tested-by: Daniel J Blueman <daniel@numascale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-26Merge branch 'for-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - threadgroup_lock got reorganized so that its users can pick the actual locking mechanism to use. Its only user - cgroups - is updated to use a percpu_rwsem instead of per-process rwsem. This makes things a bit lighter on hot paths and allows cgroups to perform and fail multi-task (a process) migrations atomically. Multi-task migrations are used in several places including the unified hierarchy. - Delegation rule and documentation added to unified hierarchy. This will likely be the last interface update from the cgroup core side for unified hierarchy before lifting the devel mask. - Some groundwork for the pids controller which is scheduled to be merged in the coming devel cycle. * 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: add delegation section to unified hierarchy documentation cgroup: require write perm on common ancestor when moving processes on the default hierarchy cgroup: separate out cgroup_procs_write_permission() from __cgroup_procs_write() kernfs: make kernfs_get_inode() public MAINTAINERS: add a cgroup core co-maintainer cgroup: fix uninitialised iterator in for_each_subsys_which cgroup: replace explicit ss_mask checking with for_each_subsys_which cgroup: use bitmask to filter for_each_subsys cgroup: add seq_file forward declaration for struct cftype cgroup: simplify threadgroup locking sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem sched, cgroup: reorganize threadgroup locking cgroup: switch to unsigned long for bitmasks cgroup: reorganize include/linux/cgroup.h cgroup: separate out include/linux/cgroup-defs.h cgroup: fix some comment typos
2015-06-26Merge tag 'driver-core-4.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the driver core / firmware changes for 4.2-rc1. A number of small changes all over the place in the driver core, and in the firmware subsystem. Nothing really major, full details in the shortlog. Some of it is a bit of churn, given that the platform driver probing changes was found to not work well, so they were reverted. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits) Revert "base/platform: Only insert MEM and IO resources" Revert "base/platform: Continue on insert_resource() error" Revert "of/platform: Use platform_device interface" Revert "base/platform: Remove code duplication" firmware: add missing kfree for work on async call fs: sysfs: don't pass count == 0 to bin file readers base:dd - Fix for typo in comment to function driver_deferred_probe_trigger(). base/platform: Remove code duplication of/platform: Use platform_device interface base/platform: Continue on insert_resource() error base/platform: Only insert MEM and IO resources firmware: use const for remaining firmware names firmware: fix possible use after free on name on asynchronous request firmware: check for file truncation on direct firmware loading firmware: fix __getname() missing failure check drivers: of/base: move of_init to driver_init drivers/base: cacheinfo: fix annoying typo when DT nodes are absent sysfs: disambiguate between "error code" and "failure" in comments driver-core: fix build for !CONFIG_MODULES driver-core: make __device_attach() static ...
2015-06-26Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patchbomb from Andrew Morton: - most of the rest of MM - lots of misc things - procfs updates - printk feature work - updates to get_maintainer, MAINTAINERS, checkpatch - lib/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits) exit,stats: /* obey this comment */ coredump: add __printf attribute to cn_*printf functions coredump: use from_kuid/kgid when formatting corename fs/reiserfs: remove unneeded cast NILFS2: support NFSv2 export fs/befs/btree.c: remove unneeded initializations fs/minix: remove unneeded cast init/do_mounts.c: add create_dev() failure log kasan: remove duplicate definition of the macro KASAN_FREE_PAGE fs/efs: femove unneeded cast checkpatch: emit "NOTE: <types>" message only once after multiple files checkpatch: emit an error when there's a diff in a changelog checkpatch: validate MODULE_LICENSE content checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr() checkpatch: fix processing of MEMSET issues checkpatch: suggest using ether_addr_equal*() checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files checkpatch: remove local from codespell path checkpatch: add --showfile to allow input via pipe to show filenames ...
2015-06-25init/do_mounts.c: add create_dev() failure logVishnu Pratap Singh
If create_dev() function fails to create the root mount device (/dev/root), then it goes to panic as root device not found but there is no printk in this case. So I have added the log in case it fails to create the root device. It will help in debugging. [akpm@linux-foundation.org: simplify printk(), use pr_emerg(), display errno] Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Dan Ehrenberg <dehrenberg@chromium.org> Cc: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25fs, proc: introduce CONFIG_PROC_CHILDRENIago López Galeiras
Commit 818411616baf ("fs, proc: introduce /proc/<pid>/task/<tid>/children entry") introduced the children entry for checkpoint restore and the file is only available on kernels configured with CONFIG_EXPERT and CONFIG_CHECKPOINT_RESTORE. This is available in most distributions (Fedora, Debian, Ubuntu, CoreOS) because they usually enable CONFIG_EXPERT and CONFIG_CHECKPOINT_RESTORE. But Arch does not enable CONFIG_EXPERT or CONFIG_CHECKPOINT_RESTORE. However, the children proc file is useful outside of checkpoint restore. I would like to use it in rkt. The rkt process exec() another program it does not control, and that other program will fork()+exec() a child process. I would like to find the pid of the child process from an external tool without iterating in /proc over all processes to find which one has a parent pid equal to rkt. This commit introduces CONFIG_PROC_CHILDREN and makes CONFIG_CHECKPOINT_RESTORE select it. This allows enabling /proc/<pid>/task/<tid>/children without needing to enable CONFIG_CHECKPOINT_RESTORE and CONFIG_EXPERT. Alban tested that /proc/<pid>/task/<tid>/children is present when the kernel is configured with CONFIG_PROC_CHILDREN=y but without CONFIG_CHECKPOINT_RESTORE Signed-off-by: Iago López Galeiras <iago@endocode.com> Tested-by: Alban Crequy <alban@endocode.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Djalal Harouni <djalal@endocode.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull cgroup writeback support from Jens Axboe: "This is the big pull request for adding cgroup writeback support. This code has been in development for a long time, and it has been simmering in for-next for a good chunk of this cycle too. This is one of those problems that has been talked about for at least half a decade, finally there's a solution and code to go with it. Also see last weeks writeup on LWN: http://lwn.net/Articles/648292/" * 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits) writeback, blkio: add documentation for cgroup writeback support vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB writeback: do foreign inode detection iff cgroup writeback is enabled v9fs: fix error handling in v9fs_session_init() bdi: fix wrong error return value in cgwb_create() buffer: remove unusued 'ret' variable writeback: disassociate inodes from dying bdi_writebacks writeback: implement foreign cgroup inode bdi_writeback switching writeback: add lockdep annotation to inode_to_wb() writeback: use unlocked_inode_to_wb transaction in inode_congested() writeback: implement unlocked_inode_to_wb transaction and use it for stat updates writeback: implement [locked_]inode_to_wb_and_lock_list() writeback: implement foreign cgroup inode detection writeback: make writeback_control track the inode being written back writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb() mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use writeback: implement memcg writeback domain based throttling writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes writeback: implement memcg wb_domain writeback: update wb_over_bg_thresh() to use wb_domain aware operations ...
2015-06-23Merge tag 'pm+acpi-4.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "The rework of backlight interface selection API from Hans de Goede stands out from the number of commits and the number of affected places perspective. The cpufreq core fixes from Viresh Kumar are quite significant too as far as the number of commits goes and because they should reduce CPU online/offline overhead quite a bit in the majority of cases. From the new featues point of view, the ACPICA update (to upstream revision 20150515) adding support for new ACPI 6 material to ACPICA is the one that matters the most as some new significant features will be based on it going forward. Also included is an update of the ACPI device power management core to follow ACPI 6 (which in turn reflects the Windows' device PM implementation), a PM core extension to support wakeup interrupts in a more generic way and support for the ACPI _CCA device configuration object. The rest is mostly fixes and cleanups all over and some documentation updates, including new DT bindings for Operating Performance Points. There is one fix for a regression introduced in the 4.1 cycle, but it adds quite a number of lines of code, it wasn't really ready before Thursday and you were on vacation, so I refrained from pushing it on the last minute for 4.1. Specifics: - ACPICA update to upstream revision 20150515 including basic support for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM, FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore, Lv Zheng). - ACPI device power management core code update to follow ACPI 6 which reflects the ACPI device power management implementation in Windows (Rafael J Wysocki). - rework of the backlight interface selection logic to reduce the number of kernel command line options and improve the handling of DMI quirks that may be involved in that and to make the code generally more straightforward (Hans de Goede). - fixes for the ACPI Embedded Controller (EC) driver related to the handling of EC transactions (Lv Zheng). - fix for a regression related to the ACPI resources management and resulting from a recent change of ACPI initialization code ordering (Rafael J Wysocki). - fix for a system initialization regression related to ACPI introduced during the 3.14 cycle and caused by running the code that switches the platform over to the ACPI mode too early in the initialization sequence (Rafael J Wysocki). - support for the ACPI _CCA device configuration object related to DMA cache coherence (Suravee Suthikulpanit). - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov). - ACPI battery driver cleanups (Luis Henriques, Mathias Krause). - ACPI processor driver cleanups (Hanjun Guo). - cleanups and documentation update related to the ACPI device properties interface based on _DSD (Rafael J Wysocki). - ACPI device power management fixes (Rafael J Wysocki). - assorted cleanups related to ACPI (Dominik Brodowski, Fabian Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki). - fix for a long-standing issue causing General Protection Faults to be generated occasionally on return to user space after resume from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar). - fix to make the suspend core code return -EBUSY consistently in all cases when system suspend is aborted due to wakeup detection (Ruchi Kandoi). - support for automated device wakeup IRQ handling allowing drivers to make their PM support more starightforward (Tony Lindgren). - new tracepoints for suspend-to-idle tracing and rework of the prepare/complete callbacks tracing in the PM core (Todd E Brandt, Rafael J Wysocki). - wakeup sources framework enhancements (Jin Qian). - new macro for noirq system PM callbacks (Grygorii Strashko). - assorted cleanups related to system suspend (Rafael J Wysocki). - cpuidle core cleanups to make the code more efficient (Rafael J Wysocki). - powernv/pseries cpuidle driver update (Shilpasri G Bhat). - cpufreq core fixes related to CPU online/offline that should reduce the overhead of these operations quite a bit, unless the CPU in question is physically going away (Viresh Kumar, Saravana Kannan). - serialization of cpufreq governor callbacks to avoid race conditions in some cases (Viresh Kumar). - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit Bhargava, Joe Konno). - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep Holla, Felipe Balbi, Tang Yuantian). - assorted cleanups in cpufreq drivers and core (Shailendra Verma, Fabian Frederick, Wang Long). - new Device Tree bindings for representing Operating Performance Points (Viresh Kumar). - updates for the common clock operations support code in the PM core (Rajendra Nayak, Geert Uytterhoeven). - PM domains core code update (Geert Uytterhoeven). - Intel Knights Landing support for the RAPL (Running Average Power Limit) power capping driver (Dasaratharaman Chandramouli). - fixes related to the floor frequency setting on Atom SoCs in the RAPL power capping driver (Ajay Thomas). - runtime PM framework documentation update (Ben Dooks). - cpupower tool fix (Herton R Krzesinski)" * tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits) cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state x86: Load __USER_DS into DS/ES after resume PM / OPP: Add binding for 'opp-suspend' PM / OPP: Allow multiple OPP tables to be passed via DT PM / OPP: Add new bindings to address shortcomings of existing bindings ACPI: Constify ACPI device IDs in documentation ACPI / enumeration: Document the rules regarding the PRP0001 device ID ACPI / video: Make acpi_video_unregister_backlight() private acpi-video-detect: Remove old API toshiba-acpi: Port to new backlight interface selection API thinkpad-acpi: Port to new backlight interface selection API sony-laptop: Port to new backlight interface selection API samsung-laptop: Port to new backlight interface selection API msi-wmi: Port to new backlight interface selection API msi-laptop: Port to new backlight interface selection API intel-oaktrail: Port to new backlight interface selection API ideapad-laptop: Port to new backlight interface selection API fujitsu-laptop: Port to new backlight interface selection API eeepc-laptop: Port to new backlight interface selection API dell-wmi: Port to new backlight interface selection API ...
2015-06-23modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.Rusty Russell
Andreas turned this option on, only to find out Debian (and Ubuntu!) don't enable support in their kmod builds. Shorten the text, and suggest N at the bottom (at least for now). Reported-by: Andreas Mohr <andim2@users.sf.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-22Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes mostly consist of work on x86 PMU drivers: - x86 Intel PT (hardware CPU tracer) improvements (Alexander Shishkin) - x86 Intel CQM (cache quality monitoring) improvements (Thomas Gleixner) - x86 Intel PEBSv3 support (Peter Zijlstra) - x86 Intel PEBS interrupt batching support for lower overhead sampling (Zheng Yan, Kan Liang) - x86 PMU scheduler fixes and improvements (Peter Zijlstra) There's too many tooling improvements to list them all - here are a few select highlights: 'perf bench': - Introduce new 'perf bench futex' benchmark: 'wake-parallel', to measure parallel waker threads generating contention for kernel locks (hb->lock). (Davidlohr Bueso) 'perf top', 'perf report': - Allow disabling/enabling events dynamicaly in 'perf top': a 'perf top' session can instantly become a 'perf report' one, i.e. going from dynamic analysis to a static one, returning to a dynamic one is possible, to toogle the modes, just press 'f' to 'freeze/unfreeze' the sampling. (Arnaldo Carvalho de Melo) - Make Ctrl-C stop processing on TUI, allowing interrupting the load of big perf.data files (Namhyung Kim) 'perf probe': (Masami Hiramatsu) - Support glob wildcards for function name - Support $params special probe argument: Collect all function arguments - Make --line checks validate C-style function name. - Add --no-inlines option to avoid searching inline functions - Greatly speed up 'perf probe --list' by caching debuginfo. - Improve --filter support for 'perf probe', allowing using its arguments on other commands, as --add, --del, etc. 'perf sched': - Add option in 'perf sched' to merge like comms to lat output (Josef Bacik) Plus tons of infrastructure work - in particular preparation for upcoming threaded perf report support, but also lots of other work - and fixes and other improvements. See (much) more details in the shortlog and in the git log" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (305 commits) perf tools: Configurable per thread proc map processing time out perf tools: Add time out to force stop proc map processing perf report: Fix sort__sym_cmp to also compare end of symbol perf hists browser: React to unassigned hotkey pressing perf top: Tell the user how to unfreeze events after pressing 'f' perf hists browser: Honour the help line provided by builtin-{top,report}.c perf hists browser: Do not exit when 'f' is pressed in 'report' mode perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events perf annotate: Rename source_line_percent to source_line_samples perf annotate: Display total number of samples with --show-total-period perf tools: Ensure thread-stack is flushed perf top: Allow disabling/enabling events dynamicly perf evlist: Add toggle_enable() method perf trace: Fix race condition at the end of started workloads perf probe: Speed up perf probe --list by caching debuginfo perf probe: Show usage even if the last event is skipped perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable perf tools: Fix a problem when opening old perf.data with different byte order perf tools: Ignore .config-detected in .gitignore perf probe: Fix to return error if no probe is added ...
2015-06-10ACPI / init: Switch over platform to the ACPI mode laterRafael J. Wysocki
Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-06-02writeback: add {CONFIG|BDI_CAP|FS}_CGROUP_WRITEBACKTejun Heo
cgroup writeback requires support from both bdi and filesystem sides. Add BDI_CAP_CGROUP_WRITEBACK and FS_CGROUP_WRITEBACK to indicate support and enable BDI_CAP_CGROUP_WRITEBACK on block based bdi's by default. Also, define CONFIG_CGROUP_WRITEBACK which is enabled if both MEMCG and BLK_CGROUP are enabled. inode_cgwb_enabled() which determines whether a given inode's both bdi and fs support cgroup writeback is added. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-28module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACINGPeter Zijlstra
Andrew worried about the overhead on small systems; only use the fancy code when either perf or tracing is enabled. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Requested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-27rcu: Remove prompt for RCU implementationPranith Kumar
The RCU implementation is chosen based on PREEMPT and SMP config options and is not really a user-selectable choice. This commit removes the menu entry, given that there is not much point in calling something a choice when there is in fact no choice.. The TINY_RCU, TREE_RCU, and PREEMPT_RCU Kconfig options continue to be selected based solely on the values of the PREEMPT and SMP options. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-05-27rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIOPaul E. McKenney
This commit updates the initialization of the kthread_prio boot parameter so that RCU will build even when CONFIG_RCU_KTHREAD_PRIO is undefined. The kthread_prio boot parameter is set to CONFIG_RCU_KTHREAD_PRIO if that is defined, otherwise to 1 if CONFIG_RCU_BOOST is defined and to zero otherwise. This commit then makes CONFIG_RCU_KTHREAD_PRIO depend on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about CONFIG_RCU_KTHREAD_PRIO unless they want to be. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2015-05-27rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAFPaul E. McKenney
This commit introduces an RCU_FANOUT_LEAF C-preprocessor macro so that RCU will build even when CONFIG_RCU_FANOUT_LEAF is undefined. The RCU_FANOUT_LEAF macro is set to the value of CONFIG_RCU_FANOUT_LEAF when defined, otherwise it is set to 32 for 32-bit systems and 64 for 64-bit systems. This commit then makes CONFIG_RCU_FANOUT_LEAF depend on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about CONFIG_RCU_FANOUT_LEAF unless they want to be. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2015-05-27rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUTPaul E. McKenney
This commit introduces an RCU_FANOUT C-preprocessor macro so that RCU will build even when CONFIG_RCU_FANOUT is undefined. The RCU_FANOUT macro is set to the value of CONFIG_RCU_FANOUT when defined, otherwise it is set to 32 for 32-bit systems and 64 for 64-bit systems. This commit then makes CONFIG_RCU_FANOUT depend on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about CONFIG_RCU_FANOUT unless they want to be. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2015-05-27rcu: Break dependency of RCU_FANOUT_LEAF on RCU_FANOUTPaul E. McKenney
RCU_FANOUT_LEAF's range and default values depend on the value of RCU_FANOUT, which at the time seemed like a cute way to save two lines of Kconfig code. However, adding a dependency from both of these Kconfig parameters on RCU_EXPERT requires that RCU_FANOUT_LEAF operate correctly even if RCU_FANOUT is undefined. This commit therefore allows RCU_FANOUT_LEAF to take on the full range of permitted values, even in cases where RCU_FANOUT is undefined. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Eliminate redundant "default" as suggested by Pranith Kumar. ] Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2015-05-27rcu: Create RCU_EXPERT Kconfig and hide booleans behind itPaul E. McKenney
This commit creates an RCU_EXPERT Kconfig and hides the independent boolean RCU-related user-visible Kconfig parameters behind it, namely RCU_FAST_NO_HZ and RCU_BOOST. This prevents Kconfig from asking about these parameters unless the user really wants to be asked. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2015-05-27rcu: Convert CONFIG_RCU_FANOUT_EXACT to boot parameterPaul E. McKenney
The CONFIG_RCU_FANOUT_EXACT Kconfig parameter is used primarily (and perhaps only) by rcutorture to verify that RCU works correctly in specific rcu_node combining-tree configurations. It therefore does not make much sense have this as a question to people attempting to configure their kernels. So this commit creates an rcutree.rcu_fanout_exact= boot parameter that rcutorture can use, and eliminates the original CONFIG_RCU_FANOUT_EXACT Kconfig parameter. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2015-05-27rcu: Directly drive RCU_USER_QS from KconfigPaul E. McKenney
Currently, Kconfig will ask the user whether RCU_USER_QS should be set. This is silly because Kconfig already has all the information that it needs to set this parameter. This commit therefore directly drives the value of RCU_USER_QS via NO_HZ_FULL's "select" statement. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-05-27rcu: Directly drive TASKS_RCU from KconfigPaul E. McKenney
Currently, Kconfig will ask the user whether TASKS_RCU should be set. This is silly because Kconfig already has all the information that it needs to set this parameter. This commit therefore directly drives the value of TASKS_RCU via "select" statements. Which means that as subsystems require TASKS_RCU, those subsystems will need to add "select" statements of their own. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2015-05-27Merge branch 'perf/urgent' into perf/core, before applying dependent patchesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsemTejun Heo
The cgroup side of threadgroup locking uses signal_struct->group_rwsem to synchronize against threadgroup changes. This per-process rwsem adds small overhead to thread creation, exit and exec paths, forces cgroup code paths to do lock-verify-unlock-retry dance in a couple places and makes it impossible to atomically perform operations across multiple processes. This patch replaces signal_struct->group_rwsem with a global percpu_rwsem cgroup_threadgroup_rwsem which is cheaper on the reader side and contained in cgroups proper. This patch converts one-to-one. This does make writer side heavier and lower the granularity; however, cgroup process migration is a fairly cold path, we do want to optimize thread operations over it and cgroup migration operations don't take enough time for the lower granularity to matter. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org>
2015-05-20module: add extra argument for parse_params() callbackLuis R. Rodriguez
This adds an extra argument onto parse_params() to be used as a way to make the unused callback a bit more useful and generic by allowing the caller to pass on a data structure of its choice. An example use case is to allow us to easily make module parameters for every module which we will do next. @ parse @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ extern char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )); @ parse_mod @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )) { ... } @ parse_args_found @ expression R, E1, E2, E3, E4, E5, E6; identifier func; @@ ( R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); ) @ parse_args_unused depends on parse_args_found @ identifier parse_args_found.func; @@ int func(char *param, char *val, const char *unused + , void *arg ) { ... } @ mod_unused depends on parse_args_found @ identifier parse_args_found.func; expression A1, A2, A3; @@ - func(A1, A2, A3); + func(A1, A2, A3, NULL); Generated-by: Coccinelle SmPL Cc: cocci@systeme.lip6.fr Cc: Tejun Heo <tj@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jean Delvare <jdelvare@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: linux-kernel@vger.kernel.org Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-08perf_event: Don't allow vmalloc() backed perf on powerpcMichael Ellerman
On powerpc the perf event interrupt is not masked when interrupts are disabled, allowing it to function as an NMI. This causes problems if perf is using vmalloc. If we take a page fault on the vmalloc region the fault handler will fail the page fault because it detects we are coming in from an NMI (see do_hash_page()). We don't actually need or want vmalloc backed perf so just disable it on powerpc. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <linuxppc-dev@ozlabs.org> Cc: Andrew Morton <akpm@osdl.org> Cc: Anton Blanchard <anton@samba.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@ghostprotocols.net Cc: sukadev@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1430720799-18426-1-git-send-email-mpe@ellerman.id.au Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-05init: fix regression by supporting devices with major:minor:offset formatChen Yu
Commit 283e7ad02 ("init: stricter checking of major:minor root= values") was so strict that it exposed the fact that a previously unknown device format was being used. Distributions like Ubuntu uses klibc (rather than uswsusp) to resume system from hibernation. klibc expressed the swap partition/file in the form of major:minor:offset. For example, 8:3:0 represents a swap partition in klibc, and klibc's resume process in initrd will finally echo 8:3:0 to /sys/power/resume for manually resuming. However, due to commit 283e7ad02's stricter checking, 8:3:0 will be treated as an invalid device format, and manual resuming from hibernation will fail. Fix this by adding support for devices with major:minor:offset format when resuming from hibernation. Reported-by: Prigent, Christophe <christophe.prigent@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-18Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6Linus Torvalds
Pull documentation updates from Jonathan Corbet: "Numerous fixes, the overdue removal of the i2o docs, some new Chinese translations, and, hopefully, the README fix that will end the flow of identical patches to that file" * tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (34 commits) Documentation/memcg: update memcg/kmem status Documentation: blackfin: Makefile: Typo building issue Documentation/vm/pagemap.txt: correct location of page-types tool Documentation/memory-barriers.txt: typo fix doc: Add guest_nice column to example output of `cat /proc/stat' Documentation/kernel-parameters: Move "eagerfpu" to its right place Documentation: gpio: Update ACPI part of the document to mention _DSD docs/completion.txt: Various tweaks and corrections doc: completion: context, scope and language fixes Documentation:Update Documentation/zh_CN/arm64/memory.txt Documentation:Update Documentation/zh_CN/arm64/booting.txt Documentation: Chinese translation of arm64/legacy_instructions.txt DocBook media: fix broken EIA hyperlink Documentation: tweak the maintainers entry README: Change gzip/bzip2 to xz compression format README: Update version number reference doc:pci: Fix typo in Documentation/PCI Documentation: drm: Use '->' when describing access through pointers. Documentation: Remove mentioning of block barriers Documentation/email-clients.txt: Fix one grammar mistake, add extra info about TB ...
2015-04-18Merge tag 'dm-4.1-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - the most extensive changes this cycle are the DM core improvements to add full blk-mq support to request-based DM. - disabled by default but user can opt-in with CONFIG_DM_MQ_DEFAULT - depends on some blk-mq changes from Jens' for-4.1/core branch so that explains why this pull is built on linux-block.git - update DM to use name_to_dev_t() rather than open-coding a less capable device parser. - includes a couple small improvements to name_to_dev_t() that offer stricter constraints that DM's code provided. - improvements to the dm-cache "mq" cache replacement policy. - a DM crypt crypt_ctr() error path fix and an async crypto deadlock fix - a small efficiency improvement for DM crypt decryption by leveraging immutable biovecs - add error handling modes for corrupted blocks to DM verity - a new "log-writes" DM target from Josef Bacik that is meant for file system developers to test file system integrity at particular points in the life of a file system - a few DM log userspace cleanups and fixes - a few Documentation fixes (for thin, cache, crypt and switch) * tag 'dm-4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (34 commits) dm crypt: fix missing error code return from crypt_ctr error path dm crypt: fix deadlock when async crypto algorithm returns -EBUSY dm crypt: leverage immutable biovecs when decrypting on read dm crypt: update URLs to new cryptsetup project page dm: add log writes target dm table: use bool function return values of true/false not 1/0 dm verity: add error handling modes for corrupted blocks dm thin: remove stale 'trim' message documentation dm delay: use msecs_to_jiffies for time conversion dm log userspace base: fix compile warning dm log userspace transfer: match wait_for_completion_timeout return type dm table: fall back to getting device using name_to_dev_t() init: stricter checking of major:minor root= values init: export name_to_dev_t and mark name argument as const dm: add 'use_blk_mq' module param and expose in per-device ro sysfs attr dm: optimize dm_mq_queue_rq to _not_ use kthread if using pure blk-mq dm: add full blk-mq support to request-based DM dm: impose configurable deadline for dm_request_fn's merge heuristic dm sysfs: introduce ability to add writable attributes dm: don't start current request if it would've merged with the previous ...
2015-04-17kernel/fork.c: new function for max_threadsHeinrich Schuchardt
PAGE_SIZE is not guaranteed to be equal to or less than 8 times the THREAD_SIZE. E.g. architecture hexagon may have page size 1M and thread size 4096. This would lead to a division by zero in the calculation of max_threads. With this patch the buggy code is moved to a separate function set_max_threads. The error is not fixed. After fixing the problem in a separate patch the new function can be reused to adjust max_threads after adding or removing memory. Argument mempages of function fork_init() is removed as totalram_pages is an exported symbol. The creation of separate patches for refactoring to a new function and for fixing the logic was suggested by Ingo Molnar. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15kernel: conditionally support non-root users, groups and capabilitiesIulia Manda
There are a lot of embedded systems that run most or all of their functionality in init, running as root:root. For these systems, supporting multiple users is not necessary. This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for non-root users, non-root groups, and capabilities optional. It is enabled under CONFIG_EXPERT menu. When this symbol is not defined, UID and GID are zero in any possible case and processes always have all capabilities. The following syscalls are compiled out: setuid, setregid, setgid, setreuid, setresuid, getresuid, setresgid, getresgid, setgroups, getgroups, setfsuid, setfsgid, capget, capset. Also, groups.c is compiled out completely. In kernel/capability.c, capable function was moved in order to avoid adding two ifdef blocks. This change saves about 25 KB on a defconfig build. The most minimal kernels have total text sizes in the high hundreds of kB rather than low MB. (The 25k goes down a bit with allnoconfig, but not that much. The kernel was booted in Qemu. All the common functionalities work. Adding users/groups is not possible, failing with -ENOSYS. Bloat-o-meter output: add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Iulia Manda <iulia.manda21@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15init: stricter checking of major:minor root= valuesDan Ehrenberg
In the kernel command-line, previously, root=1:2jakshflaksjdhfa would be accepted and interpreted just like root=1:2. This patch adds stricter checking so that additional characters after major:minor are rejected by root=. The goal of this change is to help in unifying DM's interpretation of its block device argument by using existing kernel code (name_to_dev_t). But DM rejects malformed major:minor pairs, it seems reasonable for root= to reject them as well. Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15init: export name_to_dev_t and mark name argument as constDan Ehrenberg
DM will switch its device lookup code to using name_to_dev_t() so it must be exported. Also, the @name argument should be marked const. Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge first patchbomb from Andrew Morton: - arch/sh updates - ocfs2 updates - kernel/watchdog feature - about half of mm/ * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (122 commits) Documentation: update arch list in the 'memtest' entry Kconfig: memtest: update number of test patterns up to 17 arm: add support for memtest arm64: add support for memtest memtest: use phys_addr_t for physical addresses mm: move memtest under mm mm, hugetlb: abort __get_user_pages if current has been oom killed mm, mempool: do not allow atomic resizing memcg: print cgroup information when system panics due to panic_on_oom mm: numa: remove migrate_ratelimited mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZE mm: split ET_DYN ASLR from mmap ASLR s390: redefine randomize_et_dyn for ELF_ET_DYN_BASE mm: expose arch_mmap_rnd when available s390: standardize mmap_rnd() usage powerpc: standardize mmap_rnd() usage mips: extract logic for mmap_rnd() arm64: standardize mmap_rnd() usage x86: standardize mmap_rnd() usage arm: factor out mmap ASLR into mmap_rnd ...
2015-04-14lib/ioremap.c: add huge I/O map capability interfacesToshi Kani
Add ioremap_pud_enabled() and ioremap_pmd_enabled(), which return 1 when I/O mappings with pud/pmd are enabled on the kernel. ioremap_huge_init() calls arch_ioremap_pud_supported() and arch_ioremap_pmd_supported() to initialize the capabilities at boot-time. A new kernel option "nohugeiomap" is also added, so that user can disable the huge I/O map capabilities when necessary. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "Core kernel changes: - One of the more interesting features in this cycle is the ability to attach eBPF programs (user-defined, sandboxed bytecode executed by the kernel) to kprobes. This allows user-defined instrumentation on a live kernel image that can never crash, hang or interfere with the kernel negatively. (Right now it's limited to root-only, but in the future we might allow unprivileged use as well.) (Alexei Starovoitov) - Another non-trivial feature is per event clockid support: this allows, amongst other things, the selection of different clock sources for event timestamps traced via perf. This feature is sought by people who'd like to merge perf generated events with external events that were measured with different clocks: - cluster wide profiling - for system wide tracing with user-space events, - JIT profiling events etc. Matching perf tooling support is added as well, available via the -k, --clockid <clockid> parameter to perf record et al. (Peter Zijlstra) Hardware enablement kernel changes: - x86 Intel Processor Trace (PT) support: which is a hardware tracer on steroids, available on Broadwell CPUs. The hardware trace stream is directly output into the user-space ring-buffer, using the 'AUX' data format extension that was added to the perf core to support hardware constraints such as the necessity to have the tracing buffer physically contiguous. This patch-set was developed for two years and this is the result. A simple way to make use of this is to use BTS tracing, the PT driver emulates BTS output - available via the 'intel_bts' PMU. More explicit PT specific tooling support is in the works as well - will probably be ready by 4.2. (Alexander Shishkin, Peter Zijlstra) - x86 Intel Cache QoS Monitoring (CQM) support: this is a hardware feature of Intel Xeon CPUs that allows the measurement and allocation/partitioning of caches to individual workloads. These kernel changes expose the measurement side as a new PMU driver, which exposes various QoS related PMU events. (The partitioning change is work in progress and is planned to be merged as a cgroup extension.) (Matt Fleming, Peter Zijlstra; CPU feature detection by Peter P Waskiewicz Jr) - x86 Intel Haswell LBR call stack support: this is a new Haswell feature that allows the hardware recording of call chains, plus tooling support. To activate this feature you have to enable it via the new 'lbr' call-graph recording option: perf record --call-graph lbr perf report or: perf top --call-graph lbr This hardware feature is a lot faster than stack walk or dwarf based unwinding, but has some limitations: - It reuses the current LBR facility, so LBR call stack and branch record can not be enabled at the same time. - It is only available for user-space callchains. (Yan, Zheng) - x86 Intel Broadwell CPU support and various event constraints and event table fixes for earlier models. (Andi Kleen) - x86 Intel HT CPUs event scheduling workarounds. This is a complex CPU bug affecting the SNB,IVB,HSW families that results in counter value corruption. The mitigation code is automatically enabled and is transparent. (Maria Dimakopoulou, Stephane Eranian) The perf tooling side had a ton of changes in this cycle as well, so I'm only able to list the user visible changes here, in addition to the tooling changes outlined above: User visible changes affecting all tools: - Improve support of compressed kernel modules (Jiri Olsa) - Save DSO loading errno to better report errors (Arnaldo Carvalho de Melo) - Bash completion for subcommands (Yunlong Song) - Add 'I' event modifier for perf_event_attr.exclude_idle bit (Jiri Olsa) - Support missing -f to override perf.data file ownership. (Yunlong Song) - Show the first event with an invalid filter (David Ahern, Arnaldo Carvalho de Melo) User visible changes in individual tools: 'perf data': New tool for converting perf.data to other formats, initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior) 'perf diff': Add --kallsyms option (David Ahern) 'perf list': Allow listing events with 'tracepoint' prefix (Yunlong Song) Sort the output of the command (Yunlong Song) 'perf kmem': Respect -i option (Jiri Olsa) Print big numbers using thousands' group (Namhyung Kim) Allow -v option (Namhyung Kim) Fix alignment of slab result table (Namhyung Kim) 'perf probe': Support multiple probes on different binaries on the same command line (Masami Hiramatsu) Support unnamed union/structure members data collection. (Masami Hiramatsu) Check kprobes blacklist when adding new events. (Masami Hiramatsu) 'perf record': Teach 'perf record' about perf_event_attr.clockid (Peter Zijlstra) Support recording running/enabled time (Andi Kleen) 'perf sched': Improve the performance of 'perf sched replay' on high CPU core count machines (Yunlong Song) 'perf report' and 'perf top': Allow annotating entries in callchains in the hists browser (Arnaldo Carvalho de Melo) Indicate which callchain entries are annotated in the TUI hists browser (Arnaldo Carvalho de Melo) Add pid/tid filtering to 'report' and 'script' commands (David Ahern) Consider PERF_RECORD_ events with cpumode == 0 in 'perf top', removing one cause of long term memory usage buildup, i.e. not processing PERF_RECORD_EXIT events (Arnaldo Carvalho de Melo) 'perf stat': Report unsupported events properly (Suzuki K. Poulose) Output running time and run/enabled ratio in CSV mode (Andi Kleen) 'perf trace': Handle legacy syscalls tracepoints (David Ahern, Arnaldo Carvalho de Melo) Only insert blank duration bracket when tracing syscalls (Arnaldo Carvalho de Melo) Filter out the trace pid when no threads are specified (Arnaldo Carvalho de Melo) Dump stack on segfaults (Arnaldo Carvalho de Melo) No need to explicitely enable evsels for workload started from perf, let it be enabled via perf_event_attr.enable_on_exec, removing some events that take place in the 'perf trace' before a workload is really started by it. (Arnaldo Carvalho de Melo) Allow mixing with tracepoints and suppressing plain syscalls. (Arnaldo Carvalho de Melo) There's also been a ton of infrastructure work done, such as the split-out of perf's build system into tools/build/ and other changes - see the shortlog and changelog for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (358 commits) perf/x86/intel/pt: Clean up the control flow in pt_pmu_hw_init() perf evlist: Fix type for references to data_head/tail perf probe: Check the orphaned -x option perf probe: Support multiple probes on different binaries perf buildid-list: Fix segfault when show DSOs with hits perf tools: Fix cross-endian analysis perf tools: Fix error path to do closedir() when synthesizing threads perf tools: Fix synthesizing fork_event.ppid for non-main thread perf tools: Add 'I' event modifier for exclude_idle bit perf report: Don't call map__kmap if map is NULL. perf tests: Fix attr tests perf probe: Fix ARM 32 building error perf tools: Merge all perf_event_attr print functions perf record: Add clockid parameter perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10 perf sched replay: Support using -f to override perf.data file ownership perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task perf sched replay: Fix the segmentation fault problem caused by pr_err in threads perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations ...
2015-04-14Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes from Ingo Molnar: "The main changes in this cycle were: - changes permitting use of call_rcu() and friends very early in boot, for example, before rcu_init() is invoked. - add in-kernel API to enable and disable expediting of normal RCU grace periods. - improve RCU's handling of (hotplug-) outgoing CPUs. - NO_HZ_FULL_SYSIDLE fixes. - tiny-RCU updates to make it more tiny. - documentation updates. - miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) cpu: Provide smpboot_thread_init() on !CONFIG_SMP kernels as well cpu: Defer smpboot kthread unparking until CPU known to scheduler rcu: Associate quiescent-state reports with grace period rcu: Yet another fix for preemption and CPU hotplug rcu: Add diagnostics to grace-period cleanup rcutorture: Default to grace-period-initialization delays rcu: Handle outgoing CPUs on exit from idle loop cpu: Make CPU-offline idle-loop transition point more precise rcu: Eliminate ->onoff_mutex from rcu_node structure rcu: Process offlining and onlining only at grace-period start rcu: Move rcu_report_unblock_qs_rnp() to common code rcu: Rework preemptible expedited bitmask handling rcu: Remove event tracing from rcu_cpu_notify(), used by offline CPUs rcutorture: Enable slow grace-period initializations rcu: Provide diagnostic option to slow down grace-period initialization rcu: Detect stalls caused by failure to propagate up rcu_node tree rcu: Eliminate empty HOTPLUG_CPU ifdef rcu: Simplify sync_rcu_preempt_exp_init() rcu: Put all orphan-callback-related code under same comment rcu: Consolidate offline-CPU callback initialization ...
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-13cpu: Defer smpboot kthread unparking until CPU known to schedulerPaul E. McKenney
Currently, smpboot_unpark_threads() is invoked before the incoming CPU has been added to the scheduler's runqueue structures. This might potentially cause the unparked kthread to run on the wrong CPU, since the correct CPU isn't fully set up yet. That causes a sporadic, hard to debug boot crash triggering on some systems, reported by Borislav Petkov, and bisected down to: 2a442c9c6453 ("x86: Use common outgoing-CPU-notification code") This patch places smpboot_unpark_threads() in a CPU hotplug notifier with priority set so that these kthreads are unparked just after the CPU has been added to the runqueues. Reported-and-tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-11Documentation/memcg: update memcg/kmem statusVladimir Davydov
Memcg/kmem reclaim support has been finally merged. Reflect this in the documentation. Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-04-02bpf: Fix the build on BPF_SYSCALL=y && !CONFIG_TRACING kernels, make it more ↵Ingo Molnar
configurable So bpf_tracing.o depends on CONFIG_BPF_SYSCALL - but that's not its only dependency, it also depends on the tracing infrastructure and on kprobes, without which it will fail to build with: In file included from kernel/trace/bpf_trace.c:14:0: kernel/trace/trace.h: In function ‘trace_test_and_set_recursion’: kernel/trace/trace.h:491:28: error: ‘struct task_struct’ has no member named ‘trace_recursion’ unsigned int val = current->trace_recursion; [...] It took quite some time to trigger this build failure, because right now BPF_SYSCALL is very obscure, depends on CONFIG_EXPERT. So also make BPF_SYSCALL more configurable, not just under CONFIG_EXPERT. If BPF_SYSCALL, tracing and kprobes are enabled then enable the bpf_tracing gateway as well. We might want to make this an interactive option later on, although I'd not complicate it unnecessarily: enabling BPF_SYSCALL is enough of an indicator that the user wants BPF support. Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-06init/main: fix reset_device commentFrans Klaver
Fix incorrect spelling of situation. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-05cpuset: initialize cpuset a bit earlyZefan Li
Now we call ss->bind() in cgroup_init(), so cgroup_init() will call cpuset_bind() and then the latter will access top_cpuset's cpumask, which is NULL, because cpuset_init() is called after cgroup_init() The simplest fix is to swap cgroup_init() and cpuset_init(). Cc: Vladimir Davydov <vdavydov@parallels.com> Fixes: 295458e67284 ("cgroup: call cgroup_subsys->bind on cgroup subsys initialization") Reported by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vladimir Davydov <vdavydov@parallels.com>