summaryrefslogtreecommitdiff
path: root/kernel/timer.c
AgeCommit message (Collapse)Author
2014-04-30timer: Prevent overflow in apply_slackJiri Bohac
On architectures with sizeof(int) < sizeof (long), the computation of mask inside apply_slack() can be undefined if the computed bit is > 32. E.g. with: expires = 0xffffe6f5 and slack = 25, we get: expires_limit = 0x20000000e bit = 33 mask = (1 << 33) - 1 /* undefined */ On x86, mask becomes 1 and and the slack is not applied properly. On s390, mask is -1, expires is set to 0 and the timer fires immediately. Use 1UL << bit to solve that issue. Suggested-by: Deborah Townsend <dstownse@us.ibm.com> Signed-off-by: Jiri Bohac <jbohac@suse.cz> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20140418152310.GA13654@midget.suse.cz Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Thomas Gleixner: "This assorted collection provides: - A new timer based timer broadcast feature for systems which do not provide a global accessible timer device. That allows those systems to put CPUs into deep idle states where the per cpu timer device stops. - A few NOHZ_FULL related improvements to the timer wheel - The usual updates to timer devices found in ARM SoCs - Small improvements and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) tick: Remove code duplication in tick_handle_periodic() tick: Fix spelling mistake in tick_handle_periodic() x86: hpet: Use proper destructor for delayed work workqueue: Provide destroy_delayed_work_on_stack() clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS timer: Remove code redundancy while calling get_nohz_timer_target() hrtimer: Rearrange comments in the order struct members are declared timer: Use variable head instead of &work_list in __run_timers() clocksource: exynos_mct: silence a static checker warning arm: zynq: Add support for cpufreq arm: zynq: Don't use arm_global_timer with cpufreq clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI sh: Remove Kconfig entries for TMU, CMT and MTU2 ARM: shmobile: Remove CMT, TMU and STI Kconfig entries clocksource: armada-370-xp: Use atomic access for shared registers clocksource: orion: Use atomic access for shared registers clocksource: timer-keystone: Delete unnecessary variable clocksource: timer-keystone: introduce clocksource driver for Keystone ...
2014-03-20timer: Remove code redundancy while calling get_nohz_timer_target()Viresh Kumar
There are only two users of get_nohz_timer_target(): timer and hrtimer. Both call it under same circumstances, i.e. #ifdef CONFIG_NO_HZ_COMMON if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) return get_nohz_timer_target(); #endif So, it makes more sense to get all this as part of get_nohz_timer_target() instead of duplicating code at two places. For this another parameter is required to be passed to this routine, pinned. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: fweisbec@gmail.com Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/1e1b53537217d58d48c2d7a222a9c3ac47d5b64c.1395140107.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-20timer: Use variable head instead of &work_list in __run_timers()Viresh Kumar
We already have a variable 'head' that points to '&work_list', and so we should use that instead wherever possible. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/0d8645a6efc8360c4196c9797d59343abbfdcc5e.1395129136.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04timer: Make sure TIMER_FLAG_MASK bits are free in allocated baseViresh Kumar
Currently we are using two lowest bit of base for internal purpose and so they both should be zero in the allocated address. The code was doing the right thing before this patch came in: commit c5f66e99b (timer: Implement TIMER_IRQSAFE) Tejun probably forgot to update this piece of code which checks if the lowest 'n' bits are zero or not and so wasn't updated according to the new flag. Lets use TIMER_FLAG_MASK in the calculations here. [ tglx: Massaged changelog ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: fweisbec@gmail.com Cc: tj@kernel.org Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/9144e10d7e854a0aa8a673332adec356d81a923c.1393576981.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04timer: Check failure of timer_cpu_notify() before calling init_timer_stats()Viresh Kumar
timer_cpu_notify() should return NOTIFY_OK and nothing else. Anything else would trigger a BUG_ON(). Return value of this routine is already checked correctly but is done after issuing a call to init_timer_stats(). The right order would be to check the error case first and then call init_timer_stats(). Lets do it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: fweisbec@gmail.com Cc: tj@kernel.org Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/c439f5b6bbc2047e1662f4d523350531425bcf9d.1393576981.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-28Merge branch 'timers.2014.02.25a' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-25timers: Make internal_add_timer() update ->next_timer if ->active_timers == 0Oleg Nesterov
The internal_add_timer() function updates base->next_timer only if timer->expires < base->next_timer. This is correct, but it also makes sense to do the same if we add the first non-deferrable timer. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Mike Galbraith <bitbucket@online.de>
2014-02-25timers: Reduce future __run_timers() latency for first add to empty listPaul E. McKenney
The __run_timers() function currently steps through the list one jiffy at a time in order to update the timer wheel. However, if the timer wheel is empty, no adjustment is needed other than updating ->timer_jiffies. Therefore, just before we add a timer to an empty timer wheel, we should mark the timer wheel as being up to date. This marking will reduce (and perhaps eliminate) the jiffy-stepping that a future __run_timers() call will need to do in response to some future timer posting or migration. This commit therefore updates ->timer_jiffies for this case. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Mike Galbraith <bitbucket@online.de>
2014-02-25timers: Reduce future __run_timers() latency for newly emptied listPaul E. McKenney
The __run_timers() function currently steps through the list one jiffy at a time in order to update the timer wheel. However, if the timer wheel is empty, no adjustment is needed other than updating ->timer_jiffies. Therefore, if we just emptied the timer wheel, for example, by deleting the last timer, we should mark the timer wheel as being up to date. This marking will reduce (and perhaps eliminate) the jiffy-stepping that a future __run_timers() call will need to do in response to some future timer posting or migration. This commit therefore catches ->timer_jiffies for this case. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Mike Galbraith <bitbucket@online.de>
2014-02-25timers: Reduce __run_timers() latency for empty listPaul E. McKenney
The __run_timers() function currently steps through the list one jiffy at a time in order to update the timer wheel. However, if the timer wheel is empty, no adjustment is needed other than updating ->timer_jiffies. In this case, which is likely to be common for NO_HZ_FULL kernels, the kernel currently incurs a large latency for no good reason. This commit therefore short-circuits this case. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Mike Galbraith <bitbucket@online.de>
2014-02-25timers: Track total number of timers in listPaul E. McKenney
Currently, the tvec_base structure's ->active_timers field tracks only the non-deferrable timers, which means that even if ->active_timers is zero, there might well be deferrable timers in the list. This commit therefore adds an ->all_timers field to track all the timers, whether deferrable or not. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Mike Galbraith <bitbucket@online.de>
2014-02-14timer: Spare IPI when deferrable timer is queued on idle remote targetsViresh Kumar
When a timer is enqueued or modified on a remote target, the latter is expected to see and handle this timer on its next tick. However if the target is idle and CONFIG_NO_HZ_IDLE=y, the CPU may be sleeping tickless and the timer may be ignored. wake_up_nohz_cpu() takes care of that by setting TIF_NEED_RESCHED and sending an IPI to idle targets so that the tick is reevaluated on the idle loop through the tick_nohz_idle_*() APIs. Now this is all performed regardless of the power properties of the timer. If the timer is deferrable, idle targets don't need to be woken up. Only the next buzy tick needs to care about it, and no IPI kick is needed for that to happen. So lets spare the IPI on idle targets when the timer is deferrable. Meanwhile we keep the current behaviour on full dynticks targets. We can spare IPIs on idle full dynticks targets as well but some tricky races against idle_cpu() must be dealt all along to make sure that the timer is well handled after idle exit. We can deal with that later since NO_HZ_FULL already has more important powersaving issues. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CAKohpomMZ0TAN2e6N76_g4ZRzxd5vZ1XfuZfxrP7GMxfTNiLVw@mail.gmail.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-02-13asmlinkage: Make jiffies visibleAndi Kleen
Jiffies is referenced by the linker script, so it has to be visible. Handled both the generic and the x86 version. Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1391845930-28580-3-git-send-email-ak@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-11-19timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)Joe Perches
Use the helper function instead of __GFP_ZERO. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-09-25sched: Introduce preempt_count accessor functionsPeter Zijlstra
Replace the single preempt_count() 'function' that's an lvalue with two proper functions: preempt_count() - returns the preempt_count value as rvalue preempt_count_set() - Allows setting the preempt-count value Also provide preempt_count_ptr() as a convenience wrapper to implement all modifying operations. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-orxrbycjozopqfhb4dxdkdvb@git.kernel.org [ Fixed build failure. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-14kernel: delete __cpuinit usage from all core kernel filesPaul Gortmaker
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the uses of the __cpuinit macros from C files in the core kernel directories (kernel, init, lib, mm, and include) that don't really have a specific maintainer. [1] https://lkml.org/lkml/2013/5/20/589 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-28timer: Fix jiffies wrap behavior of round_jiffies_common()Bart Van Assche
Direct compare of jiffies related values does not work in the wrap around case. Replace it with time_is_after_jiffies(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/519BC066.5080600@acm.org Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-15Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: - Cure for not using zalloc in the first place, which leads to random crashes with CPUMASK_OFF_STACK. - Revert a user space visible change which broke udev - Add a missing cpu_online early return introduced by the new full dyntick conversions - Plug a long standing race in the timer wheel cpu hotplug code. Sigh... - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu up. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline tick: Cleanup NOHZ per cpu data on cpu down tick: Use zalloc_cpumask_var for allocating offstack cpumasks
2013-05-14timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARETirupathi Reddy
An inactive timer's base can refer to a offline cpu's base. In the current code, cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is trying to modify an inactive timer on that CPU with holding its timer base lock, then the lock will be reinitialized under its feet. This leads to following SPIN_BUG(). <0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466 <0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1 <4> [<c0013dc4>] (unwind_backtrace+0x0/0x11c) from [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) <4> [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) from [<c076c160>] (_raw_spin_unlock+0x8/0x30) <4> [<c076c160>] (_raw_spin_unlock+0x8/0x30) from [<c009b858>] (mod_timer+0x294/0x310) <4> [<c009b858>] (mod_timer+0x294/0x310) from [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) <4> [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) from [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) <4> [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) from [<c04d8780>] (sdhci_disable+0x40/0x48) <4> [<c04d8780>] (sdhci_disable+0x40/0x48) from [<c04bf300>] (mmc_release_host+0x4c/0xb0) <4> [<c04bf300>] (mmc_release_host+0x4c/0xb0) from [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) <4> [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) from [<c04c2504>] (mmc_rescan+0x7c/0x2c4) <4> [<c04c2504>] (mmc_rescan+0x7c/0x2c4) from [<c00a6a7c>] (process_one_work+0x27c/0x484) <4> [<c00a6a7c>] (process_one_work+0x27c/0x484) from [<c00a6e94>] (worker_thread+0x210/0x3b0) <4> [<c00a6e94>] (worker_thread+0x210/0x3b0) from [<c00aad9c>] (kthread+0x80/0x8c) <4> [<c00aad9c>] (kthread+0x80/0x8c) from [<c000ea80>] (kernel_thread_exit+0x0/0x8) As an example, this particular crash occurred when CPU #3 is executing mod_timer() on an inactive timer whose base is refered to offlined CPU #2. The code locked the timer_base corresponding to CPU #2. Before it could proceed, CPU #2 came online and reinitialized the spinlock corresponding to its base. Thus now CPU #3 held a lock which was reinitialized. When CPU #3 finally ended up unlocking the old cpu_base corresponding to CPU #2, we hit the above SPIN_BUG(). CPU #0 CPU #3 CPU #2 ------ ------- ------- ..... ...... <Offline> mod_timer() lock_timer_base spin_lock_irqsave(&base->lock) cpu_up(2) ..... ...... init_timers_cpu() .... ..... spin_lock_init(&base->lock) ..... spin_unlock_irqrestore(&base->lock) ...... <spin_bug> Allocation of per_cpu timer vector bases is done only once under "tvec_base_done[]" check. In the current code, spinlock_initialization of base->lock isn't under this check. When a CPU is up each time the base lock is reinitialized. Move base spinlock initialization under the check. Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-05Merge branch 'timers-nohz-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull 'full dynticks' support from Ingo Molnar: "This tree from Frederic Weisbecker adds a new, (exciting! :-) core kernel feature to the timer and scheduler subsystems: 'full dynticks', or CONFIG_NO_HZ_FULL=y. This feature extends the nohz variable-size timer tick feature from idle to busy CPUs (running at most one task) as well, potentially reducing the number of timer interrupts significantly. This feature got motivated by real-time folks and the -rt tree, but the general utility and motivation of full-dynticks runs wider than that: - HPC workloads get faster: CPUs running a single task should be able to utilize a maximum amount of CPU power. A periodic timer tick at HZ=1000 can cause a constant overhead of up to 1.0%. This feature removes that overhead - and speeds up the system by 0.5%-1.0% on typical distro configs even on modern systems. - Real-time workload latency reduction: CPUs running critical tasks should experience as little jitter as possible. The last remaining source of kernel-related jitter was the periodic timer tick. - A single task executing on a CPU is a pretty common situation, especially with an increasing number of cores/CPUs, so this feature helps desktop and mobile workloads as well. The cost of the feature is mainly related to increased timer reprogramming overhead when a CPU switches its tick period, and thus slightly longer to-idle and from-idle latency. Configuration-wise a third mode of operation is added to the existing two NOHZ kconfig modes: - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named as a config option. This is the traditional Linux periodic tick design: there's a HZ tick going on all the time, regardless of whether a CPU is idle or not. - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the periodic tick when a CPU enters idle mode. - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the tick when a CPU is idle, also slows the tick down to 1 Hz (one timer interrupt per second) when only a single task is running on a CPU. The .config behavior is compatible: existing !CONFIG_NO_HZ and CONFIG_NO_HZ=y settings get translated to the new values, without the user having to configure anything. CONFIG_NO_HZ_FULL is turned off by default. This feature is based on a lot of infrastructure work that has been steadily going upstream in the last 2-3 cycles: related RCU support and non-periodic cputime support in particular is upstream already. This tree adds the final pieces and activates the feature. The pull request is marked RFC because: - it's marked 64-bit only at the moment - the 32-bit support patch is small but did not get ready in time. - it has a number of fresh commits that came in after the merge window. The overwhelming majority of commits are from before the merge window, but still some aspects of the tree are fresh and so I marked it RFC. - it's a pretty wide-reaching feature with lots of effects - and while the components have been in testing for some time, the full combination is still not very widely used. That it's default-off should reduce its regression abilities and obviously there are no known regressions with CONFIG_NO_HZ_FULL=y enabled either. - the feature is not completely idempotent: there is no 100% equivalent replacement for a periodic scheduler/timer tick. In particular there's ongoing work to map out and reduce its effects on scheduler load-balancing and statistics. This should not impact correctness though, there are no known regressions related to this feature at this point. - it's a pretty ambitious feature that with time will likely be enabled by most Linux distros, and we'd like you to make input on its design/implementation, if you dislike some aspect we missed. Without flaming us to crisp! :-) Future plans: - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off the periodic tick altogether when there's a single busy task on a CPU. We'd first like 1 Hz to be exposed more widely before we go for the 0 Hz target though. - once we reach 0 Hz we can remove the periodic tick assumption from nr_running>=2 as well, by essentially interrupting busy tasks only as frequently as the sched_latency constraints require us to do - once every 4-40 msecs, depending on nr_running. I am personally leaning towards biting the bullet and doing this in v3.10, like the -rt tree this effort has been going on for too long - but the final word is up to you as usual. More technical details can be found in Documentation/timers/NO_HZ.txt" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) sched: Keep at least 1 tick per second for active dynticks tasks rcu: Fix full dynticks' dependency on wide RCU nocb mode nohz: Protect smp_processor_id() in tick_nohz_task_switch() nohz_full: Add documentation. cputime_nsecs: use math64.h for nsec resolution conversion helpers nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config nohz: Reduce overhead under high-freq idling patterns nohz: Remove full dynticks' superfluous dependency on RCU tree nohz: Fix unavailable tick_stop tracepoint in dynticks idle nohz: Add basic tracing nohz: Select wide RCU nocb for full dynticks nohz: Disable the tick when irq resume in full dynticks CPU nohz: Re-evaluate the tick for the new task after a context switch nohz: Prepare to stop the tick on irq exit nohz: Implement full dynticks kick nohz: Re-evaluate the tick from the scheduler IPI sched: New helper to prevent from stopping the tick in full dynticks sched: Kick full dynticks CPU that have more than one task enqueued. perf: New helper to prevent full dynticks CPUs from stopping tick perf: Kick full dynticks CPU if events rotation is needed ...
2013-04-30kernel/timer.c: move some non timer related syscalls to kernel/sys.cStephen Rothwell
Andrew Morton noted: akpm3:/usr/src/25> grep SYSCALL kernel/timer.c SYSCALL_DEFINE1(alarm, unsigned int, seconds) SYSCALL_DEFINE0(getpid) SYSCALL_DEFINE0(getppid) SYSCALL_DEFINE0(getuid) SYSCALL_DEFINE0(geteuid) SYSCALL_DEFINE0(getgid) SYSCALL_DEFINE0(getegid) SYSCALL_DEFINE0(gettid) SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info) COMPAT_SYSCALL_DEFINE1(sysinfo, struct compat_sysinfo __user *, info) Only one of those should be in kernel/timer.c. Who wrote this thing? [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30kernel/timer.c: convert compat_sys_sysinfo to COMPAT_SYSCALL_DEFINEStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30kernel/compat.c: make do_sysinfo() staticStephen Rothwell
The only use outside of kernel/timer.c was in kernel/compat.c, so move compat_sys_sysinfo() next to sys_sysinfo() in kernel/timer.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-03nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMONFrederic Weisbecker
We are planning to convert the dynticks Kconfig options layout into a choice menu. The user must be able to easily pick any of the following implementations: constant periodic tick, idle dynticks, full dynticks. As this implies a mutual exclusion, the two dynticks implementions need to converge on the selection of a common Kconfig option in order to ease the sharing of a common infrastructure. It would thus seem pretty natural to reuse CONFIG_NO_HZ to that end. It already implements all the idle dynticks code and the full dynticks depends on all that code for now. So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ. On the other hand we want to stay backward compatible: if CONFIG_NO_HZ is set in an older config file, we want to enable CONFIG_NO_HZ_IDLE by default. But we can't afford both at the same time or we run into a circular dependency: 1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select CONFIG_NO_HZ 2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE We might be able to support that from Kconfig/Kbuild but it may not be wise to introduce such a confusing behaviour. So to solve this, create a new CONFIG_NO_HZ_COMMON option which gathers the common code between idle and full dynticks (that common code for now is simply the idle dynticks code) and select it from their referring Kconfig. Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ to it for backward compatibility. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-03-21nohz: Wake up full dynticks CPUs when a timer gets enqueuedFrederic Weisbecker
Wake up a CPU when a timer list timer is enqueued there and the target is part of the full dynticks range. Sending an IPI to it makes it reconsidering the next timer to program on top of recent updates. This may later be improved by checking if the tick is really stopped on the target. This would need some careful synchronization though. So deal with such optimization later and start simple. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-02-19Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Main changes: - scheduler side full-dynticks (user-space execution is undisturbed and receives no timer IRQs) preparation changes that convert the cputime accounting code to be full-dynticks ready, from Frederic Weisbecker. - Initial sched.h split-up changes, by Clark Williams - select_idle_sibling() performance improvement by Mike Galbraith: " 1 tbench pair (worst case) in a 10 core + SMT package: pre 15.22 MB/sec 1 procs post 252.01 MB/sec 1 procs " - sched_rr_get_interval() ABI fix/change. We think this detail is not used by apps (so it's not an ABI in practice), but lets keep it under observation. - misc RT scheduling cleanups, optimizations" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h> cputime: Remove irqsave from seqlock readers sched, powerpc: Fix sched.h split-up build failure cputime: Restore CPU_ACCOUNTING config defaults for PPC64 sched/rt: Move rt specific bits into new header file sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice sched: Move sched.h sysctl bits into separate header sched: Fix signedness bug in yield_to() sched: Fix select_idle_sibling() bouncing cow syndrome sched/rt: Further simplify pick_rt_task() sched/rt: Do not account zero delta_exec in update_curr_rt() cputime: Safely read cputime of full dynticks CPUs kvm: Prepare to add generic guest entry/exit callbacks cputime: Use accessors to read task cputime stats cputime: Allow dynamic switch between tick/virtual based cputime accounting cputime: Generic on-demand virtual cputime accounting cputime: Move default nsecs_to_cputime() to jiffies based cputime file cputime: Librarize per nsecs resolution cputime definitions cputime: Avoid multiplication overflow on utime scaling context_tracking: Export context state for generic vtime ... Fix up conflict in kernel/context_tracking.c due to comment additions.
2013-02-07sched: Move sched.h sysctl bits into separate headerClark Williams
Move the sysctl-related bits from include/linux/sched.h into a new file: include/linux/sched/sysctl.h. Then update source files requiring access to those bits by including the new header file. Signed-off-by: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20130207094659.06dced96@riff.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-11-18printk: Wake up klogd using irq_workFrederic Weisbecker
klogd is woken up asynchronously from the tick in order to do it safely. However if printk is called when the tick is stopped, the reader won't be woken up until the next interrupt, which might not fire for a while. As a result, the user may miss some message. To fix this, lets implement the printk tick using a lazy irq work. This subsystem takes care of the timer tick state and can fix up accordingly. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-10-09timers: Fix endless looping between cascade() and internal_add_timer()Hildner, Christian
Adding two (or more) timers with large values for "expires" (they have to reside within tv5 in the same list) leads to endless looping between cascade() and internal_add_timer() in case CONFIG_BASE_SMALL is one and jiffies are crossing the value 1 << 18. The bug was introduced between 2.6.11 and 2.6.12 (and survived for quite some time). This patch ensures that when cascade() is called timers within tv5 are not added endlessly to their own list again, instead they are added to the next lower tv level tv4 (as expected). Signed-off-by: Christian Hildner <christian.hildner@siemens.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Link: http://lkml.kernel.org/r/98673C87CB31274881CFFE0B65ECC87B0F5FC1963E@DEFTHW99EA4MSX.ww902.siemens.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2012-10-09Merge branch 'fortglx/3.7/time' of git://git.linaro.org/people/jstultz/linux ↵Thomas Gleixner
into timers/core
2012-08-21timer: Implement TIMER_IRQSAFETejun Heo
Timer internals are protected with irq-safe locks but timer execution isn't, so a timer being dequeued for execution and its execution aren't atomic against IRQs. This makes it impossible to wait for its completion from IRQ handlers and difficult to shoot down a timer from IRQ handlers. This issue caused some issues for delayed_work interface. Because there's no way to reliably shoot down delayed_work->timer from IRQ handlers, __cancel_delayed_work() can't share the logic to steal the target delayed_work with cancel_delayed_work_sync(), and can only steal delayed_works which are on queued on timer. Similarly, the pending mod_delayed_work() can't be used from IRQ handlers. This patch adds a new timer flag TIMER_IRQSAFE, which makes the timer to be executed without enabling IRQ after dequeueing such that its dequeueing and execution are atomic against IRQ handlers. This makes it safe to wait for the timer's completion from IRQ handlers, for example, using del_timer_sync(). It can never be executing on the local CPU and if executing on other CPUs it won't be interrupted until done. This will enable simplifying delayed_work cancel/mod interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: torvalds@linux-foundation.org Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/1344449428-24962-5-git-send-email-tj@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21timer: Clean up timer initializersTejun Heo
Over time, timer initializers became messy with unnecessarily duplicated code which are inconsistently spread across timer.h and timer.c. This patch cleans up timer initializers. * timer.c::__init_timer() is renamed to do_init_timer(). * __TIMER_INITIALIZER() added. It takes @flags and all initializers are wrappers around it. * init_timer[_on_stack]_key() now take @flags. * __init_timer[_on_stack]() added. They take @flags and all init macros are wrappers around them. * __setup_timer[_on_stack]() added. It uses __init_timer() and takes @flags. All setup macros are wrappers around the two. Note that this patch doesn't add missing init/setup combinations - e.g. init_timer_deferrable_on_stack(). Adding missing ones is trivial. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: torvalds@linux-foundation.org Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/1344449428-24962-4-git-send-email-tj@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21timer: Generalize timer->base flags handlingTejun Heo
To prepare for addition of another flag, generalize timer->base flags handling. * Rename from TBASE_*_FLAG to TIMER_* and make them LU constants. * Define and use TIMER_FLAG_MASK for flags masking so that multiple flags can be handled correctly. * Don't dereference timer->base directly even if !tbase_get_deferrable(). All two such places are already passed in @base, so use it instead. * Make sure tvec_base's alignment is large enough for timer->base flags using BUILD_BUG_ON(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: torvalds@linux-foundation.org Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/1344449428-24962-2-git-send-email-tj@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-19alpha: take a bunch of syscalls into osf_sys.cAl Viro
New helper: current_thread_info(). Allows to do a bunch of odd syscalls in C. While we are at it, there had never been a reason to do osf_getpriority() in assembler. We also get "namespace"-aware (read: consistent with getuid(2), etc.) behaviour from getx?id() syscalls now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Acked-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-06timers: Improve get_next_timer_interrupt()Thomas Gleixner
Gilad reported at http://lkml.kernel.org/r/1336056962-10465-2-git-send-email-gilad@benyossef.com "Current timer code fails to correctly return a value meaning that there is no future timer event, with the result that the timer keeps getting re-armed in HZ one shot mode even when we could turn it off, generating unneeded interrupts. What is happening is that when __next_timer_interrupt() wishes to return a value that signifies "there is no future timer event", it returns (base->timer_jiffies + NEXT_TIMER_MAX_DELTA). However, the code in tick_nohz_stop_sched_tick(), which called __next_timer_interrupt() via get_next_timer_interrupt(), compares the return value to (last_jiffies + NEXT_TIMER_MAX_DELTA) to see if the timer needs to be re-armed. base->timer_jiffies != last_jiffies and so tick_nohz_stop_sched_tick() interperts the return value as indication that there is a distant future event 12 days from now and programs the timer to fire next after KTIME_MAX nsecs instead of avoiding to arm it. This ends up causing a needless interrupt once every KTIME_MAX nsecs." Fix this by using the new active timer accounting. This avoids scans when no active timer is enqueued completely, so we don't have to rely on base->timer_next and base->timer_jiffies anymore. Reported-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20120525214819.317535385@linutronix.de
2012-06-06timers: Add accounting of non deferrable timersThomas Gleixner
The code in get_next_timer_interrupt() is suboptimal as it has to run through the cascade to find the next expiring timer. On a completely idle core we should only do that when there is an active timer enqueued and base->next_timer does not give us a fast answer. Add accounting of the active timers to the now consolidated attach/detach code. I deliberately avoided sanity checks because the code is fully symetric and any fiddling with timers w/o using the API functions will lead to cute explosions anyway. ulong is big enough even on 32bit and if we really run into the situation to have more than 1<<32 timers enqueued there, then we are definitely not in a state to go idle and run through that code. This allows us to fix another shortcoming of get_next_timer_interrupt(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20120525214819.236377028@linutronix.de
2012-06-06timers: Consolidate base->next_timer updateThomas Gleixner
Another bunch of mindlessly copied code. All callers of internal_add_timer() except the recascading code updates base->next_timer. Move this into internal_add_timer() and let the cascading code call __internal_add_timer(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20120525214819.189946224@linutronix.de
2012-06-06timers: Create detach_if_pending() and use itThomas Gleixner
Most callers of detach_timer() have the same pattern around them. Check whether the timer is pending and eventually updating base->next_timer. Create detach_if_pending() and replace the duplicated code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20120525214819.131246037@linutronix.de
2012-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace enhancements from Eric Biederman: "This is a course correction for the user namespace, so that we can reach an inexpensive, maintainable, and reasonably complete implementation. Highlights: - Config guards make it impossible to enable the user namespace and code that has not been converted to be user namespace safe. - Use of the new kuid_t type ensures the if you somehow get past the config guards the kernel will encounter type errors if you enable user namespaces and attempt to compile in code whose permission checks have not been updated to be user namespace safe. - All uids from child user namespaces are mapped into the initial user namespace before they are processed. Removing the need to add an additional check to see if the user namespace of the compared uids remains the same. - With the user namespaces compiled out the performance is as good or better than it is today. - For most operations absolutely nothing changes performance or operationally with the user namespace enabled. - The worst case performance I could come up with was timing 1 billion cache cold stat operations with the user namespace code enabled. This went from 156s to 164s on my laptop (or 156ns to 164ns per stat operation). - (uid_t)-1 and (gid_t)-1 are reserved as an internal error value. Most uid/gid setting system calls treat these value specially anyway so attempting to use -1 as a uid would likely cause entertaining failures in userspace. - If setuid is called with a uid that can not be mapped setuid fails. I have looked at sendmail, login, ssh and every other program I could think of that would call setuid and they all check for and handle the case where setuid fails. - If stat or a similar system call is called from a context in which we can not map a uid we lie and return overflowuid. The LFS experience suggests not lying and returning an error code might be better, but the historical precedent with uids is different and I can not think of anything that would break by lying about a uid we can't map. - Capabilities are localized to the current user namespace making it safe to give the initial user in a user namespace all capabilities. My git tree covers all of the modifications needed to convert the core kernel and enough changes to make a system bootable to runlevel 1." Fix up trivial conflicts due to nearby independent changes in fs/stat.c * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits) userns: Silence silly gcc warning. cred: use correct cred accessor with regards to rcu read lock userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq userns: Convert cgroup permission checks to use uid_eq userns: Convert tmpfs to use kuid and kgid where appropriate userns: Convert sysfs to use kgid/kuid where appropriate userns: Convert sysctl permission checks to use kuid and kgids. userns: Convert proc to use kuid/kgid where appropriate userns: Convert ext4 to user kuid/kgid where appropriate userns: Convert ext3 to use kuid/kgid where appropriate userns: Convert ext2 to use kuid/kgid where appropriate. userns: Convert devpts to use kuid/kgid where appropriate userns: Convert binary formats to use kuid/kgid where appropriate userns: Add negative depends on entries to avoid building code that is userns unsafe userns: signal remove unnecessary map_cred_ns userns: Teach inode_capable to understand inodes whose uids map to other namespaces. userns: Fail exec for suid and sgid binaries with ids outside our user namespace. userns: Convert stat to return values mapped from kuids and kgids userns: Convert user specfied uids and gids in chown into kuids and kgid userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs ...
2012-05-22Merge branch 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "Nothing exciting. Most are updates to debug stuff and related fixes. Two not-too-critical bugs are fixed - WARN_ON() triggering spurious during cpu offlining and unlikely lockdep related oops." * 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: lockdep: fix oops in processing workqueue workqueue: skip nr_running sanity check in worker_enter_idle() if trustee is active workqueue: Catch more locking problems with flush_work() workqueue: change BUG_ON() to WARN_ON() trace: Remove unused workqueue tracer
2012-05-15lockdep: fix oops in processing workqueuePeter Zijlstra
Under memory load, on x86_64, with lockdep enabled, the workqueue's process_one_work() has been seen to oops in __lock_acquire(), barfing on a 0xffffffff00000000 pointer in the lockdep_map's class_cache[]. Because it's permissible to free a work_struct from its callout function, the map used is an onstack copy of the map given in the work_struct: and that copy is made without any locking. Surprisingly, gcc (4.5.1 in Hugh's case) uses "rep movsl" rather than "rep movsq" for that structure copy: which might race with a workqueue user's wait_on_work() doing lock_map_acquire() on the source of the copy, putting a pointer into the class_cache[], but only in time for the top half of that pointer to be copied to the destination map. Boom when process_one_work() subsequently does lock_map_acquire() on its onstack copy of the lockdep_map. Fix this, and a similar instance in call_timer_fn(), with a lockdep_copy_map() function which additionally NULLs the class_cache[]. Note: this oops was actually seen on 3.4-next, where flush_work() newly does the racing lock_map_acquire(); but Tejun points out that 3.4 and earlier are already vulnerable to the same through wait_on_work(). * Patch orginally from Peter. Hugh modified it a bit and wrote the description. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Reported-by: Hugh Dickins <hughd@google.com> LKML-Reference: <alpine.LSU.2.00.1205070951170.1544@eggly.anvils> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-05-03userns: Convert setting and getting uid and gid system calls to use kuid and ↵Eric W. Biederman
kgid Convert setregid, setgid, setreuid, setuid, setresuid, getresuid, setresgid, getresgid, setfsuid, setfsgid, getuid, geteuid, getgid, getegid, waitpid, waitid, wait4. Convert userspace uids and gids into kuids and kgids before being placed on struct cred. Convert struct cred kuids and kgids into userspace uids and gids when returning them. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-26timer: Fix mod_timer_pinned() header commentPaul E. McKenney
The mod_timer_pinned() header comment states that it prevents timers from being migrated to a different CPU. This is not the case, instead, it ensures that the timer is posted to the current CPU, but does nothing to prevent CPU-hotplug operations from migrating the timer. This commit therefore brings the comment header into alignment with reality. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-06Merge branch 'core-debugobjects-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Use debugobjects to catch deletion of uninitialized timers timer: Setup uninitialized timer with a stub callback debugobjects: Extend to assert that an object is initialized debugobjects: Be smarter about static objects
2011-12-09sys_getppid: add missing rcu_dereferenceMandeep Singh Baines
In order to safely dereference current->real_parent inside an rcu_read_lock, we need an rcu_dereference. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-23timer: Use debugobjects to catch deletion of uninitialized timersChristine Chan
del_timer_sync() calls debug_object_assert_init() to assert that a timer has been initialized before calling lock_timer_base(). lock_timer_base() would spin forever on a NULL(uninit-ed) base. The check is added to del_timer() to prevent silent failure, even though it would not get stuck in an infinite loop. [ sboyd@codeaurora.org: Remove WARN, intialize timer function] Signed-off-by: Christine Chan <cschan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1320724108-20788-4-git-send-email-sboyd@codeaurora.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-23timer: Setup uninitialized timer with a stub callbackStephen Boyd
Remove the WARN_ON() in timer_fixup_activate() as we now get the debugobjects printout in the debugobjects activate check. We also assign a dummy timer callback so that if the timer is actually set to fire we don't oops. [ tglx@linutronix.de: Split out the debugobjects vs. the timer change ] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Christine Chan <cschan@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1320724108-20788-2-git-send-email-sboyd@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-31kernel: Map most files to use export.h instead of module.hPaul Gortmaker
The changed files were only including linux/module.h for the EXPORT_SYMBOL infrastructure, and nothing else. Revector them onto the isolated export header for faster compile times. Nothing to see here but a whole lot of instances of: -#include <linux/module.h> +#include <linux/export.h> This commit is only changing the kernel dir; next targets will probably be mm, fs, the arch dirs, etc. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-03timers: Consider slack value in mod_timer()Sebastian Andrzej Siewior
There is an optimization which does not update the timer if the timer was pending and the expiration time was unchanged. Since commit 3bbb9ec9 ("timers: Introduce the concept of timer slack for legacy timers") this optimization is no longer applied for timers where the expiration time got extended due to the slack value. So we need to check again after the expiration time might have been updated. [ tglx: Made it a single check by applying slack first and sorting out the slack = 0 value (all timeouts < 256 jiffies) early ] Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Link: http://lkml.kernel.org/r/20110521105828.GA29442@Chamillionaire.breakpoint.cc Signed-off-by: Thomas Gleixner <tglx@linutronix.de>