summaryrefslogtreecommitdiff
path: root/net/8021q
AgeCommit message (Collapse)Author
2014-04-14vlan: Set hard_header_len according to available accelerationVlad Yasevich
[ Upstream commit fc0d48b8fb449ca007b2057328abf736cb516168 ] Currently, if the card supports CTAG acceleration we do not account for the vlan header even if we are configuring an 8021AD vlan. This may not be best since we'll do software tagging for 8021AD which will cause data copy on skb head expansion Configure the length based on available hw offload capabilities and vlan protocol. CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14vlan: Set correct source MAC address with TX VLAN offload enabledPeter Boström
[ Upstream commit dd38743b4cc2f86be250eaf156cf113ba3dd531a ] With TX VLAN offload enabled the source MAC address for frames sent using the VLAN interface is currently set to the address of the real interface. This is wrong since the VLAN interface may be configured with a different address. The bug was introduced in commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ("vlan: Fix header ops passthru when doing TX VLAN offload."). This patch sets the source address before calling the create function of the real interface. Signed-off-by: Peter Boström <peter.bostrom@netrounds.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15vlan: Fix header ops passthru when doing TX VLAN offload.David S. Miller
[ Upstream commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ] When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04net: vlan: fix nlmsg size calculation in vlan_get_size()Marc Kleine-Budde
[ Upstream commit c33a39c575068c2ea9bffb22fd6de2df19c74b89 ] This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28vlan: fix a race in egress prio managementEric Dumazet
[ Upstream commit 3e3aac497513c669e1c62c71e1d552ea85c1d974 ] egress_priority_map[] hash table updates are protected by rtnl, and we never remove elements until device is dismantled. We have to make sure that before inserting an new element in hash table, all its fields are committed to memory or else another cpu could find corrupt values and crash. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28vlan: mask vlan prio bitsEric Dumazet
[ Upstream commit d4b812dea4a236f729526facf97df1a9d18e191c ] In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ("vlan: don't deliver frames for unknown vlans to protocols") Florian made sure we set pkt_type to PACKET_OTHERHOST if the vlan id is set and we could find a vlan device for this particular id. But we also have a problem if prio bits are set. Steinar reported an issue on a router receiving IPv6 frames with a vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device, because skb->vlan_tci is set. Forwarded frame is completely corrupted : We can see (8100:4000) being inserted in the middle of IPv6 source address : 16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 > 9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64 0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651 0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213 0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 It seems we are not really ready to properly cope with this right now. We can probably do better in future kernels : vlan_get_ingress_priority() should be a netdev property instead of a per vlan_dev one. For stable kernels, lets clear vlan_tci to fix the bugs. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-02net: vlan,ethtool: netdev_features_t is more than 32 bitBjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01proc: Supply a function to remove a proc entry by PDEDavid Howells
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@linaro.or> cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-21net: vlan: fix up vlan_proto_idx() for CONFIG_BUG=nPatrick McHardy
Add missing return statement for CONFIG_BUG=n. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-21net: vlan: fix memory leak in vlan_info_rcu_free()Patrick McHardy
The following leak is reported by kmemleak: [ 86.812073] kmemleak: Found object by alias at 0xffff88006ecc76f0 [ 86.816019] Pid: 739, comm: kworker/u:1 Not tainted 3.9.0-rc5+ #842 [ 86.816019] Call Trace: [ 86.816019] <IRQ> [<ffffffff81151c58>] find_and_get_object+0x8c/0xdf [ 86.816019] [<ffffffff8190e90d>] ? vlan_info_rcu_free+0x33/0x49 [ 86.816019] [<ffffffff81151cbe>] delete_object_full+0x13/0x2f [ 86.816019] [<ffffffff8194bbb6>] kmemleak_free+0x26/0x45 [ 86.816019] [<ffffffff8113e8c7>] slab_free_hook+0x1e/0x7b [ 86.816019] [<ffffffff81141c05>] kfree+0xce/0x14b [ 86.816019] [<ffffffff8190e90d>] vlan_info_rcu_free+0x33/0x49 [ 86.816019] [<ffffffff810d0b0b>] rcu_do_batch+0x261/0x4e7 The reason is that in vlan_info_rcu_free() we don't take the VLAN protocol into account when iterating over the vlan_devices_array. Reported-by: Cong Wang <amwang@redhat.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add 802.1ad supportPatrick McHardy
Add support for 802.1ad VLAN devices. This mainly consists of checking for ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check offloading capabilities based on the used protocol. Configuration is done using "ip link": # ip link add link eth0 eth0.1000 \ type vlan proto 802.1ad id 1000 # ip link add link eth0.1000 eth0.1000.1000 \ type vlan proto 802.1q id 1000 52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64 92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84) 20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad supportPatrick McHardy
Make the encapsulation protocol value a property of VLAN devices and change the device lookup functions to take the protocol value into account. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-248021q: fix a potential use-after-freeCong Wang
vlan_vid_del() could possibly free ->vlan_info after a RCU grace period, however, we may still refer to the freed memory area by 'grp' pointer. Found by code inspection. This patch moves vlan_vid_del() as behind as possible. Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18net: proc: change proc_net_remove to remove_proc_entryGao feng
proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13bridge: Implement vlan ingress/egress policy with PVID.Vlad Yasevich
At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lockNeil Horman
__netpoll_rcu_free is used to free netpoll structures when the rtnl_lock is already held. The mechanism is used to asynchronously call __netpoll_cleanup outside of the holding of the rtnl_lock, so as to avoid deadlock. Unfortunately, __netpoll_cleanup modifies pointers (dev->np), which means the rtnl_lock must be held while calling it. Further, it cannot be held, because rcu callbacks may be issued in softirq contexts, which cannot sleep. Fix this by converting the rcu callback to a work queue that is guaranteed to get scheduled in process context, so that we can hold the rtnl properly while calling __netpoll_cleanup Tested successfully by myself. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Cong Wang <amwang@redhat.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-10net/8021q: Implement Multiple VLAN Registration Protocol (MVRP)David Ward
Initial implementation of the Multiple VLAN Registration Protocol (MVRP) from IEEE 802.1Q-2011, based on the existing implementation of the GARP VLAN Registration Protocol (GVRP). Signed-off-by: David Ward <david.ward@ll.mit.edu> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29net: disallow drivers with buggy VLAN accel to register_netdevice()Michał Mirosław
Instead of jumping aroung bugs that are easily fixed just don't let them in: affected drivers should be either fixed or have NETIF_F_HW_VLAN_FILTER removed from advertised features. Quick grep in drivers/net shows two drivers that have NETIF_F_HW_VLAN_FILTER but not ndo_vlan_rx_add/kill_vid(), but those are false-positives (features are commented out). OTOH two drivers have ndo_vlan_rx_add/kill_vid() implemented but don't advertise NETIF_F_HW_VLAN_FILTER. Those are: +ethernet/cisco/enic/enic_main.c +ethernet/qlogic/qlcnic/qlcnic_main.c Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04vlan: remove usage of dev->master in __vlan_find_dev_deep()Jiri Pirko
Also, since all users call __vlan_find_dev_deep() with rcu_read_lock, make no possibility to call this with rtnl mutex held only. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04vlan: add link to upper deviceJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-308021q: fix vlan device to inherit the unicast filtering capability flagYi Zou
This bug is observed on running FCoE over a VLAN device associated w/ a real device that has IFF_UNICAST_FLT set since FCoE would add unicast address such as FLOGI MAC to the VLAN interface that FCoE is on. Since currently, VLAN device is not inheriting the IFF_UNICAST_FLT flag from the parent real device even though the real device is capable of doing unicast filtering. This forces the VLAN device and its real device go to promiscuous mode unnecessarily even the added address is actually being added to the available unicast filter table in real device. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: devel@open-fcoe.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18net: Allow the userns root to control vlans.Eric W. Biederman
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Allow the vlan ioctls: SET_VLAN_INGRESS_PRIORITY_CMD SET_VLAN_EGRESS_PRIORITY_CMD SET_VLAN_FLAG_CMD SET_VLAN_NAME_TYPE_CMD ADD_VLAN_CMD DEL_VLAN_CMD Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08vlan: set sysfs device_type to 'vlan'Doug Goldstein
Sets the sysfs device_type to 'vlan' for udev. This makes it easier for applications that query network information via udev to identify vlans instead of using strrchr(). Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01vlan: use IS_ENABLED()Amerigo Wang
#if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18vlan: allow to change type when no vlan device is hooked on netdevJiri Pirko
vlan_info might be present but still no vlan devices might be there. That is in case of vlan0 automatically added. So in that case, allow to change netdev type. Reported-by: Jon Stanley <jstanley@rmrf.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16vlan: fix bond/team enslave of vlan challenged slave/portJiri Pirko
In vlan_uses_dev() check for number of vlan devs rather than existence of vlan_info. The reason is that vlan id 0 is there without appropriate vlan dev on it by default which prevented from enslaving vlan challenged dev. Reported-by: Jon Stanley <jstanley@rmrf.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08vlan: don't deliver frames for unknown vlans to protocolsFlorian Zumbiehl
6a32e4f9dd9219261f8856f817e6655114cfec2f made the vlan code skip marking vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if there was an rx_handler, as the rx_handler could cause the frame to be received on a different (virtual) vlan-capable interface where that vlan might be configured. As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause frames for unknown vlans to be delivered to the protocol stack as if they had been received untagged. For example, if an ipv6 router advertisement that's tagged for a locally not configured vlan is received on an interface with macvlan interfaces attached, macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the macvlan interfaces, which caused it to be passed to the protocol stack, leading to ipv6 addresses for the announced prefix being configured even though those are completely unusable on the underlying interface. The fix moves marking as PACKET_OTHERHOST after the rx_handler so the rx_handler, if there is one, sees the frame unchanged, but afterwards, before the frame is delivered to the protocol stack, it gets marked whether there is an rx_handler or not. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-028021q: fix mac_len recomputation in vlan_untag()Antonio Quartulli
skb_reset_mac_len() relies on the value of the skb->network_header pointer, therefore we must wait for such pointer to be recalculated before computing the new mac_len value. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-01treewide: fix comment/printk/variable typosAnatol Pomozov
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-08-24vlan: add helper which can be called to see if device is used by vlanJiri Pirko
also, remove unused vlan_info definition from header CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14vlan: clean up vlan_dev_hard_start_xmit()Amerigo Wang
Clean up vlan_dev_hard_start_xmit() function. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14vlan: clean up some variable namesAmerigo Wang
To be consistent, s/info/vlan/. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: make __netpoll_cleanup non-blockAmerigo Wang
Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup() may be called with read_lock() held too, so we should make them non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()Amerigo Wang
slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17netpoll: move np->dev and np->dev_name init into __netpoll_setup()Jiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix memory leak - vlan_info structAmir Hanania
In driver reload test there is a memory leak. The structure vlan_info was not freed when the driver was removed. It was not released since the nr_vids var is one after last vlan was removed. The nr_vids is one, since vlan zero is added to the interface when the interface is being set, but the vlan zero is not deleted at unregister. Fix - delete vlan zero when we unregister the device. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-05-10Revert "net: maintain namespace isolation between vlan and real device"David S. Miller
This reverts commit 8a83a00b0735190384a348156837918271034144. It causes regressions for S390 devices, because it does an unconditional DST drop on SKBs for vlans and the QETH device needs the neighbour entry hung off the DST for certain things on transmit. Arnd can't remember exactly why he even needed this change. Conflicts: drivers/net/macvlan.c net/8021q/vlan_dev.c net/core/dev.c Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-098021q: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02vlan: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14vlan: static functionsEric Dumazet
commit 6d4cdf47d2 (vlan: add 802.1q netpoll support) forgot to declare as static some private functions. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14vlan: add rtnl_dereference() annotationsDan Carpenter
The original code generates a Sparse warning: net/8021q/vlan_core.c:336:9: error: incompatible types in comparison expression (different address spaces) It's ok to dereference __rcu pointers here because we are holding the RTNL lock. I've added some calls to rtnl_dereference() to silence the warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-24 03:35:08 +0000