summaryrefslogtreecommitdiff
path: root/net/irda/ircomm
AgeCommit message (Collapse)Author
2015-03-08Merge tag 'tty-4.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for 4.0-rc3. Along with the atime fix that you know about, here are some other serial driver bugfixes as well. Most notable is a wait_until_sent bugfix that was traced back to being around since before 2.6.12 that Johan has fixed up. All have been in linux-next successfully" * tag 'tty-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: TTY: fix tty_wait_until_sent maximum timeout TTY: fix tty_wait_until_sent on 64-bit machines USB: serial: fix infinite wait_until_sent timeout TTY: bfin_jtag_comm: remove incorrect wait_until_sent operation net: irda: fix wait_until_sent poll timeout serial: uapi: Declare all userspace-visible io types serial: core: Fix iotype userspace breakage serial: sprd: Fix missing spin_unlock in sprd_handle_irq() console: Fix console name size mismatch tty: fix up atime/mtime mess, take four serial: 8250_dw: Fix get_mctrl behaviour serial:8250:8250_pci: delete unneeded quirk entries serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S Change email address for 8250_pci serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" Revert "tty/serial: of_serial: add DT alias ID handling"
2015-03-07net: irda: fix wait_until_sent poll timeoutJohan Hovold
In case an infinite timeout (0) is requested, the irda wait_until_sent implementation would use a zero poll timeout rather than the default 200ms. Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # v2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-23irda: replace current->state by set_current_state()Fabian Frederick
Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. current->state = TASK_RUNNING can be replaced by __set_current_state() Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10irda: Convert function pointer arrays and uses to constJoe Perches
Making things const is a good thing. (x86-64 defconfig with all irda) $ size net/irda/built-in.o* text data bss dec hex filename 109276 1868 244 111388 1b31c net/irda/built-in.o.new 108828 2316 244 111388 1b31c net/irda/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12irda: Fix build failures after IRDA_DEBUG->pr_debugJoe Perches
Fix the build failures that result from the use of pr_debug without the referenced char * arrays being defined. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12irda: Convert IRDA_DEBUG to pr_debugJoe Perches
Use the normal kernel debugging mechanism which also enables dynamic_debug at the same time. Other miscellanea: o Remove sysctl for irda_debug o Remove function tracing like uses (use ftrace instead) o Coalesce formats o Realign arguments o Remove unnecessary OOM messages Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11irda: Remove IRDA_<TYPE> logging macrosJoe Perches
And use the more common mechanisms directly. Other miscellanea: o Coalesce formats o Add missing newlines o Realign arguments o Remove unnecessary OOM message logging as there's a generic stack dump already on OOM. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10tty: Remove tty_hung_up_p() tests from tty drivers' open()Peter Hurley
Since at least before 2.6.30, it has not been possible to observe a hung up file pointer in a tty driver's open() method unless/until the driver open() releases the tty_lock() (eg., before blocking). This is because tty_open() adds the file pointer while holding the tty_lock() _and_ doesn't release the lock until after calling the tty driver's open() method. [ Before tty_lock(), this was lock_kernel(). ] Since __tty_hangup() first waits on the tty_lock() before enumerating and hanging up the open file pointers, either __tty_hangup() will wait for the tty_lock() or tty_open() will not yet have added the file pointer. For example, CPU 0 | CPU 1 | tty_open | __tty_hangup .. | .. tty_lock | .. tty_reopen | tty_lock / blocks .. | tty_add_file(tty, filp) | .. | tty->ops->open(tty, filp) | tty_port_open | tty_port_block_til_ready | .. | while (1) | .. | tty_unlock | / unblocks schedule | for each filp on tty->tty_files | f_ops = tty_hung_up_fops; | .. | tty_unlock tty_lock | .. | tty_unlock | Note that since tty_port_block_til_ready() and similar drop the tty_lock while blocking, when woken, the file pointer must then be tested for having been hung up. Also, fix bit-rotted drivers that used extra_count to track the port->count bump. CC: Mikael Starvik <starvik@axis.com> CC: Samuel Ortiz <samuel@sortiz.org> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-06net/irda: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-04-12TTY: ircomm: fix DTR being raised on hang upJohan Hovold
Make sure to check ASYNC_INITIALISED before raising DTR when waking up from blocked open in ircomm_tty_block_til_ready. Currently DTR could get raised at hang up as a blocked process would raise DTR unconditionally before checking for hang up and returning. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08TTY: ircomm, use GFP_KERNEL in ircomm_open()Mathias Krause
Hi Greg, I'm unsure if you or Dave should take that one as it's for one a TTY patch but also living under net/. So I'm uncertain and let you decide! Thanks, Mathias -- >8 -- Subject: [PATCH] TTY: ircomm, use GFP_KERNEL in ircomm_open() We're clearly running in non-atomic context as our only call site is able to call wait_event_interruptible(). So we're safe to use GFP_KERNEL here instead of GFP_ATOMIC. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21Merge 3.9-rc3 into tty-nextGreg Kroah-Hartman
2013-03-18TTY: add tty_port_tty_hangup helperJiri Slaby
It allows for cleaning up on a considerable amount of places. They did port_get, hangup, kref_put. Now the only thing needed is to call tty_port_tty_hangup which does exactly that. And they can also decide whether to consider CLOCAL or completely ignore that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-06net/irda: Raise dtr in non-blocking openPeter Hurley
DTR/RTS need to be raised, regardless of the open() mode, but not if the port has already shutdown. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net/irda: Use barrier to set task statePeter Hurley
Without a memory and compiler barrier, the task state change can migrate relative to the condition testing in a blocking loop. However, the task state change must be visible across all cpus prior to testing those conditions. Failing to do this can result in the familiar 'lost wakeup' and this task will hang until killed. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net/irda: Hold port lock while bumping blocked_openPeter Hurley
Although tty_lock() already protects concurrent update to blocked_open, that fails to meet the separation-of-concerns between tty_port and tty. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net/irda: Fix port open countsPeter Hurley
Saving the port count bump is unsafe. If the tty is hung up while this open was blocking, the port count is zeroed. Explicitly check if the tty was hung up while blocking, and correct the port count if not. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_flip_buffer_pushJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: move low_latency to tty_portJiri Slaby
One point is to have less places where we actually need tty pointer. The other is that low_latency is bound to buffer processing and buffers are now in tty_port. So it makes sense to move low_latency to tty_port too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_insert_flip_stringJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_string this time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: call tty_port_destroy in the rest of driversJiri Slaby
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. To be sure, the TTY buffers (and later some stuff) are gone along with the tty_port, we have to call tty_port_destroy at tear-down places. This is mostly where the structure containing a tty_port is freed. This patch does exactly that -- put tty_port_destroy at those places. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-05net, TTY: initialize tty->driver_data before usageSasha Levin
Commit 9c650ffc ("TTY: ircomm_tty, add tty install") split _open() to _install() and _open(). It also moved the initialization of driver_data out of open(), but never added it to install() - causing a NULL ptr deref whenever the driver was used. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05serial: add a new helper functionHuang Shijie
In most of the time, the driver needs to check if the cts flow control is enabled. But now, the driver checks the ASYNC_CTS_FLOW flag manually, which is not a grace way. So add a new wraper function to make the code tidy and clean. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: ircomm_tty, add tty installJiri Slaby
This has two outcomes: * we give the TTY layer a tty_port * we do not find the info structure every time open is called on that tty Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16tty: move the termios object into the ttyAlan Cox
This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, use tty_port_close_start helperJiri Slaby
Again, the code is identical, so leverage the helper code. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, use tty_port_close_end helperJiri Slaby
Again, the code is identical, so leverage the helper code. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, define carrier routinesJiri Slaby
These will be used by the tty_port wait_til_ready later. (Now they are used by our code.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, define local tty_portJiri Slaby
In some functions we use tty_port heavily. So let us have a local pointer to that variable instead of having self->port all over the code. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, use tty from tty_portJiri Slaby
This also includes a switch to tty refcounting. It makes sure, the code no longer can access a freed TTY struct. Sometimes the only thing needed is to pass tty down to the callies. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, revamp lockingJiri Slaby
Use self->spinlock only for ctrl_skb and tx_skb. TTY stuff is now protected by tty_port->lock. This is needed for further cleanup (and conversion to tty_port helpers). This also closes the race in the end of close. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, use flags from tty_portJiri Slaby
Switch to tty_port->flags. And while at it, remove redefined flags for them. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, use open counts from tty_portJiri Slaby
Switch to tty_port->count and blocked_open. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, use close times from tty_portJiri Slaby
Switch to tty_port->close_delay and closing_wait. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12TTY: ircomm, add tty_portJiri Slaby
And use close/open_wait from there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08TTY: remove unneeded tty->index checksJiri Slaby
Checking if tty->index is in bounds is not needed. The tty has the index set in the initial open. This is done in get_tty_driver. And it can be only in interval <0,driver->num). So remove the tests which check exactly this interval. Some are left untouched as they check against the current backing device count. (Leaving apart that the check is racy in most of the cases.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: remove re-assignments to tty_driver membersJiri Slaby
All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-08-25TTY: use tty_wait_until_sent_from_close in other driversJiri Slaby
Let's use the newly added helper to avoid stalls in drivers which are not yet ported to tty_port helpers. Those which are broken (call tty_wait_until_sent with irqs disabled) are left untouched. They are in a deeper trouble than we are trying to solve here. This includes amiserial, 68328serial, 68360serial and crisv10. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-16net: Remove casts of void *Joe Perches
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script: $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-05-19irda: Fix error propagation in ircomm_lmp_connect_response()David S. Miller
The variable 'ret' is set but unused, and this pointed out that errors from irlmp_connect_response() are not propagated to the caller. Note that this is currently academic since irlmp_connect_response() always returns 0. :-) Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19irda: Kill set but unused variable 'clen' in ircomm_connect_indication()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12net/irda/ircomm_tty.c: Use flip buffers to deliver dataAmit Virdi
use tty_insert_flip_string and tty_flip_buffer_push to deliver incoming data packets from the IrDA device instead of delivering the packets directly to the line discipline. Following later approach resulted in warning "Sleeping function called from invalid context". Signed-off-by: Amit Virdi <amit.virdi@st.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17tty: now phase out the ioctl file pointer for goodAlan Cox
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmset: kill the file pointer argumentAlan Cox
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmget: kill off the passing of the struct fileAlan Cox
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22Net: irda: ircomm: Makefile: Remove deprecated kbuild goal defintionsTracey Dent
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-23net: return operator cleanupEric Dumazet
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-12 11:21:00 +0000