summaryrefslogtreecommitdiff
path: root/net/wireless/nl80211.c
AgeCommit message (Collapse)Author
2012-09-04nl80211: fix possible memory leak nl80211_connect()Wei Yongjun
connkeys is malloced in nl80211_parse_connkeys() and should be freed in the error handling case, otherwise it will cause memory leak. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-20Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-17cfg80211: add cellular base station regulatory hint supportLuis R. Rodriguez
Cellular base stations can provide hints to cfg80211 about where they think we are. This can be done for example on a cell phone. To enable these hints we simply allow them through as user regulatory hints but we allow userspace to clasify the hint as either coming directly from the user or coming from a cellular base station. This option is only available when you enable CONFIG_CFG80211_CERTIFICATION_ONUS. The base station hints themselves will not be processed by the core unless at least one device on the system supports this feature. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17cfg80211: support TX error rate CQMThomas Pedersen
Let the user configure serveral TX error conection quality monitoring parameters: % error rate, survey interval, and # of attempted packets. On exceeding the TX failure rate over the given interval, the driver will send a CQM notify event with the actual TX failure rate and packets attempted. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17nl80211: add wdev ID as u64 as it shouldJohannes Berg
In one of my previous patches I erroneously used nla_put_u32 for the wdev_id, fix that to use nla_put_u64. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13cfg80211/mac80211: re-add get_channel operationJohannes Berg
This essentially reverts commit 2e165b818456 but introduces the get_channel operation with a new wireless_dev argument so that you can retrieve the channel per interface. This is necessary as even though we can track all interface channels (except monitor) we can't track the channel type used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12nl80211: allow enabling WoWLAN without triggersJohannes Berg
It may be desirable to use WoWLAN without triggers to keep the connection alive to the AP while suspended. Allow this use by enabling WoWLAN without triggers if no triggers were requested. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-12nl80211: move scan API to wdevJohannes Berg
The new P2P Device will have to be able to scan for P2P search, so move scanning to use struct wireless_dev instead of struct net_device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12nl80211: send interface after creationJohannes Berg
After a new virtual interface is created, reply to userspace with a message detailing it so it knows the new wdev identifier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12cfg80211: use wireless_dev for interface managementJohannes Berg
In order to be able to create P2P Device wdevs, move the virtual interface management over to wireless_dev structures. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09cfg80211: use wdev in mgmt-tx/ROC APIsJohannes Berg
The management frame and remain-on-channel APIs will be needed in the P2P device abstraction, so move them over to the new wdev-based APIs. Userspace can still use both the interface index and wdev identifier for them so it's backward compatible, but for the P2P Device wdev it will be able to use the wdev identifier only. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09nl80211: retrieve interface data by wdevJohannes Berg
Since soon there will be virtual interfaces that don't have a netdev, use the wdev identifier for the API to retrieve interface data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09nl80211: add NL80211_FLAG_NEED_WDEVJohannes Berg
Some nl80211 callbacks will soon need the wdev instead of the netdev, so add NL80211_FLAG_NEED_WDEV to allow them to request that. Add NL80211_FLAG_NEED_WDEV_UP as well which checks the netdev is UP if one exists. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09nl80211: prepare for non-netdev wireless devsJohannes Berg
In order to support a P2P device abstraction and Bluetooth high-speed AMPs, we need to have a way to identify virtual interfaces that don't have a netdev associated. Do this by adding a NL80211_ATTR_WDEV attribute to identify a wdev which may or may not also be a netdev. To simplify things, use a 64-bit value with the high 32 bits being the wiphy index for this new wdev identifier in the nl80211 API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-05{nl,cfg}80211: support high bitratesVladimir Kondratiev
Until now, a u16 value was used to represent bitrate value. With VHT bitrates this becomes too small. Introduce a new 32-bit bitrate attribute. nl80211 will report both the new and the old attribute, unless the bitrate doesn't fit into the old u16 attribute in which case only the new one will be reported. User space tools encouraged to prefer the 32-bit attribute, if available (since it won't be available on older kernels.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [reword commit message and comments a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
2012-06-29cfg80211: respect iface combinations when starting operationMichal Kazior
devlist_mtx locking is changed to accomodate changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211/mac80211: remove .get_channelMichal Kazior
We do not need it anymore since cfg80211 tracks monitor channel and monitor channel type. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: add channel tracking for AP and meshMichal Kazior
We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: introduce cfg80211_stop_apMichal Kazior
This functionality will be reused when interface is going down. Avoids code duplication. Also adds missing wdev locking. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28net: Use NLMSG_DEFAULT_SIZE in combination with nlmsg_new()Thomas Graf
Using NLMSG_GOODSIZE results in multiple pages being used as nlmsg_new() will automatically add the size of the netlink header to the payload thus exceeding the page limit. NLMSG_DEFAULT_SIZE takes this into account. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28cfg80211: allow advertising VHT capabilitiesMahesh Palivela
Allow drivers to advertise their VHT capabilities and export them to userspace via nl80211. Signed-off-by: Mahesh Palivela <maheshp@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27cfg80211: don't allow WoWLAN support without CONFIG_PMJohannes Berg
When CONFIG_PM is disabled, no device can possibly support WoWLAN since it can't go to sleep to start with. Due to this, mac80211 had even rejected the hardware registration. By making all the code and data for WoWLAN depend on CONFIG_PM we can promote this runtime error to a compile-time error. Add #ifdef around all WoWLAN code to remove it in systems that don't need it as they never suspend. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-26nl80211: specify RSSI threshold in scheduled scanThomas Pedersen
Support configuring an RSSI threshold in dBm (s32) when requesting scheduled scan, below which a BSS won't be reported by the cfg80211 driver. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20cfg80211: fix regression in multi-vif AP startFelix Fietkau
Commit "cfg80211: provide channel to start_ap function" assumes that the channel is always passed to the NL80211_CMD_START_AP command, however in case of multi-BSSID, hostapd only passes the channel for the first vif. This makes starting beaconing on secondary vifs fail with -EINVAL. Fix this by storing the channel provided to .start_ap in wdev->preset_chan and picking the first AP vif's channel for secondary vifs if not provided. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20nl80211: use __cfg80211_rdev_from_attrs for testmodeJohannes Berg
To fix the testmode cross-namespace access problem, use __cfg80211_rdev_from_attrs() to get the device instead of open-coding similar functionality. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20nl80211: change __cfg80211_rdev_from_infoJohannes Berg
Change the function to __cfg80211_rdev_from_attrs to take attributes instead of the info struct to make it usable from dump callbacks for testmode. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20nl80211: fix netns separationJohannes Berg
There are currently a few ways to "escape" the network namespace and access a wiphy that belongs to another namespace. Add a netns argument to the relevant functions to fix this. One remaining issue with testmode will be fixed in a follow-up patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20nl80211: refactor __cfg80211_rdev_from_infoJohannes Berg
Refactor the function to make it easier to extend. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20cfg80211: make some functions staticJohannes Berg
Some of the functions to retrieve a device can be static as they're used only in nl80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18{nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationIntervalChun-Yeow Yeoh
As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14{nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and ↵Chun-Yeow Yeoh
dot11MeshHWMPactivePathToRootTimeout Add the mesh configuration parameters dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout to be used by proactive PREQ mechanism. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-13nl80211: fix sched scan match attribute nameJohannes Berg
It should be NL80211_SCHED_SCAN_MATCH_ATTR_SSID as documented, not NL80211_ATTR_SCHED_SCAN_MATCH_SSID. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-11{nl,cfg,mac}80211: fix the coding style related to mesh parametersChun-Yeow Yeoh
fix the coding style related to mesh parameters, especially the indentation, as pointed out by Johannes Berg. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06cfg80211: validate remain-on-channel time betterJohannes Berg
The remain-on-channel time validation shouldn't depend on the value of HZ, as it does now with the check against jiffies, since then you might use a value that works on one system but not on another. Fix it by checking against a minimum that's fixed. Also add validation of the wait duration for a management frame TX since this also translates into remain-on-channel internally. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06cfg80211: clarify set_channel APIsJohannes Berg
Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to join_mesh functionJohannes Berg
Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: disallow setting channel on WDS interfacesJohannes Berg
If it worked (Felix says it doesn't right now), the typical use-case for WDS interfaces would be to be slaved to AP mode interfaces. Therefore, it isn't necessary to set the channel on WDS interfaces. As they don't support powersave or anything like that, they also couldn't use a different channel anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to start_ap functionJohannes Berg
Instead of setting the channel first and then starting the AP, let cfg80211 store the channel and provide it as one of the AP settings. This means that now you have to set the channel before you can start an AP interface, but since hostapd/wpa_supplicant always do that we're OK with this change. Alternatively, it's now possible to give the channel as an attribute to the start-ap nl80211 command, overriding any preset channel. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16nl80211: refactor valid channel type checkJohannes Berg
There are four instances in nl80211 of getting the channel type from the attribute and validating it, refactor those. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16nl80211: prevent additions to old station flags APIJohannes Berg
We don't really want/need to maintain the old station flags API any more, so refuse changes to new (not yet defined) flags from the old flags API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08{nl,cfg,mac}80211: Allow user to see/configure HT protection modeAshok Nagarajan
This patch introduces a new mesh configuration parameter "ht_opmode" and will allow user to check the current HT protection mode selected. Users could configure the protection mode by the command "iw mesh_iface set mesh_param mesh_ht_protection_mode=2". The default protection mode of mesh is set to non-HT mixed mode. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c
2012-04-23cfg80211: Validate legacy rateset.Bala Shanmugam
Legacy rates are not validated while configuring tx rateset using iw. So below cmd is accepted by nl80211. sudo iw wlan2 set bitrates legacy-2.4 1 2 3 Validate legacy rates and return error if any rate in the rateset is not valid. Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c include/net/nfc/nfc.h net/nfc/netlink.c net/wireless/nl80211.c
2012-04-13cfg80211: Add channel information to NL80211_CMD_GET_INTERFACEPontus Fuchs
If the current channel is known, add frequency and channel type to NL80211_CMD_GET_INTERFACE. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12Merge branch 'master' into for-davemJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c net/wireless/nl80211.c
2012-04-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-04-11cfg80211: add channel switch notify eventThomas Pedersen
The firmware may decide to switch channels while already beaconing, e.g. in response to a cfg80211 connect request on a different vif. Add this event to notify userspace when an AP or GO interface has successfully migrated to a new channel, so it can update its configuration accordingly. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-29 14:02:20 +0000