summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2009-10-07wireless: implement basic ethtool support for cfg80211 devicesJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07wext: refactorJohannes Berg
Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07nl80211: report age of scan resultsHolger Schurig
Linux keeps scan results up to 15 seconds. This can be a problem for fast moving clients: they get back stale data. But if the kernel reports the age of the BSS items, then user-space can simply weed out old entries by itself. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-05cfg80211: assign device type in netdev notifier callbackMarcel Holtmann
Instead of having to modify every non-mac80211 for device type assignment, do this inside the netdev notifier callback of cfg80211. So all drivers that integrate with cfg80211 will export a proper device type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28wext: add back wireless/ dir in sysfs for cfg80211 interfacesJohannes Berg
The move away from having drivers assign wireless handlers, in favour of making cfg80211 assign them, broke the sysfs registration (the wireless/ dir went missing) because the handlers are now assigned only after registration, which is too late. Fix this by special-casing cfg80211-based devices, all of which are required to have an ieee80211_ptr, in the sysfs code, and also using get_wireless_stats() to have the same values reported as in procfs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Tested-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28wext: Add bound checks for copy_from_userArjan van de Ven
The wireless extensions have a copy_from_user to a local stack array "essid", but both me and gcc have failed to find where the bounds for this copy are located in the code. This patch adds some basic sanity checks for the copy length to make sure that we don't overflow the stack buffer. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: always get BSSJohannes Berg
Multiple problems were reported due to interaction between wpa_supplicant and the wext compat code in cfg80211, which appear to be due to it not getting any bss pointer here when wpa_supplicant sets all parameters -- do that now. We should still get the bss after doing an extra scan, but that appears to increase the time we need for connecting enough to sometimes cause timeouts. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Hin-Tak Leung <hintak.leung@gmail.com>, Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: don't set privacy w/o keyJohannes Berg
When wpa_supplicant is used to connect to open networks, it causes the wdev->wext.keys to point to key memory, but that key memory is all empty. Only use privacy when there is a default key to be used. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: wext: don't display BSSID unless associatedJohannes Berg
Currently, cfg80211's SIOCGIWAP implementation returns the BSSID that the user set, even if the connection has since been dropped due to other changes. It only should return the current BSSID when actually connected. Also do a small code cleanup. Reported-by: Thomas H. Guenther <thomas.h.guenther@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Thomas H. Guenther <thomas.h.guenther@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h
2009-09-23cfg80211: don't overwrite privacy settingJohannes Berg
When cfg80211 is instructed to connect, it always uses the default WEP key for the privacy setting, which clearly is wrong when using wpa_supplicant. Don't overwrite the setting, and rely on it being false when wpa_supplicant is not running, instead set it to true when we have keys. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23cfg80211: fix SME connectJohannes Berg
There's a check saying /* we're good if we have both BSSID and channel */ if (wdev->conn->params.bssid && wdev->conn->params.channel) { but that isn't true -- we need the BSS struct. This leads to errors such as Trying to associate with 00:1b:53:11:dc:40 (SSID='TEST' freq=2412 MHz) ioctl[SIOCSIWFREQ]: No such file or directory ioctl[SIOCSIWESSID]: No such file or directory Association request to the driver failed Associated with 00:1b:53:11:dc:40 in wpa_supplicant, as reported by Holger. Instead, we really need to have the BSS struct, and if we don't, then we need to initiate a scan for it. But we may already have the BSS struct here, so hang on to it if we do and scan if we don't. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23cfg80211: minimal error handling for wext-compat freq scanningHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23cfg80211: use cfg80211_wext_freq() for freq conversionHolger Schurig
WEXT's "struct iw_freq" can also be used to handle a channel. This patch now uses cfg80211_wext_freq() instead of hand-converting the frequency. That allows user-space to specify channels as well, like with SIOCSIWFREQ. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-16cfg80211: fix SME connectJohannes Berg
There's a check saying /* we're good if we have both BSSID and channel */ if (wdev->conn->params.bssid && wdev->conn->params.channel) { but that isn't true -- we need the BSS struct. This leads to errors such as Trying to associate with 00:1b:53:11:dc:40 (SSID='TEST' freq=2412 MHz) ioctl[SIOCSIWFREQ]: No such file or directory ioctl[SIOCSIWESSID]: No such file or directory Association request to the driver failed Associated with 00:1b:53:11:dc:40 in wpa_supplicant, as reported by Holger. Instead, we really need to have the BSS struct, and if we don't, then we need to initiate a scan for it. But we may already have the BSS struct here, so hang on to it if we do and scan if we don't. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14cfg80211: minimal error handling for wext-compat freq scanningHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14cfg80211: use cfg80211_wext_freq() for freq conversionHolger Schurig
WEXT's "struct iw_freq" can also be used to handle a channel. This patch now uses cfg80211_wext_freq() instead of hand-converting the frequency. That allows user-space to specify channels as well, like with SIOCSIWFREQ. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09cfg80211: allow scanning on specified frequencies when using wext-compatibilityHolger Schurig
Handles the case when SIOCSIWSCAN specified iw_scan_req.num_channels and iw_scan_req.channels[]. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08wireless: update cfg80211 kconfig entryLuis R. Rodriguez
cfg80211 is now *the* wireless configuration API. Lets also give a little explanation as to what it is and refer people to the wireless wiki for more information. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-02cfg80211: fix looping soft lockup in find_ie()Bob Copeland
The find_ie() function uses a size_t for the len parameter, and directly uses len as a loop variable. If any received packets are malformed, it is possible for the decrease of len to overflow, and since the result is unsigned, the loop will not terminate. Change it to a signed int so the loop conditional works for negative values. This fixes the following soft lockup: [38573.102007] BUG: soft lockup - CPU#0 stuck for 61s! [phy0:2230] [38573.102007] Modules linked in: aes_i586 aes_generic fuse af_packet ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state iptable_filter ip_tables x_tables acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod kvm_intel kvm uinput i915 arc4 ecb drm snd_hda_codec_idt ath5k snd_hda_intel hid_apple mac80211 usbhid appletouch snd_hda_codec snd_pcm ath cfg80211 snd_timer i2c_algo_bit ohci1394 video snd processor ieee1394 rfkill ehci_hcd sg sky2 backlight snd_page_alloc uhci_hcd joydev output ac thermal button battery sr_mod applesmc cdrom input_polldev evdev unix [last unloaded: scsi_wait_scan] [38573.102007] irq event stamp: 2547724535 [38573.102007] hardirqs last enabled at (2547724534): [<c1002ffc>] restore_all_notrace+0x0/0x18 [38573.102007] hardirqs last disabled at (2547724535): [<c10038f4>] apic_timer_interrupt+0x28/0x34 [38573.102007] softirqs last enabled at (92950144): [<c103ab48>] __do_softirq+0x108/0x210 [38573.102007] softirqs last disabled at (92950274): [<c1348e74>] _spin_lock_bh+0x14/0x80 [38573.102007] [38573.102007] Pid: 2230, comm: phy0 Tainted: G W (2.6.31-rc7-wl #8) MacBook1,1 [38573.102007] EIP: 0060:[<f8ea2d50>] EFLAGS: 00010292 CPU: 0 [38573.102007] EIP is at cmp_ies+0x30/0x180 [cfg80211] [38573.102007] EAX: 00000082 EBX: 00000000 ECX: ffffffc1 EDX: d8efd014 [38573.102007] ESI: ffffff7c EDI: 0000004d EBP: eee2dc50 ESP: eee2dc3c [38573.102007] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [38573.102007] CR0: 8005003b CR2: d8efd014 CR3: 01694000 CR4: 000026d0 [38573.102007] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [38573.102007] DR6: ffff0ff0 DR7: 00000400 [38573.102007] Call Trace: [38573.102007] [<f8ea2f8d>] cmp_bss+0xed/0x100 [cfg80211] [38573.102007] [<f8ea33e4>] cfg80211_bss_update+0x84/0x410 [cfg80211] [38573.102007] [<f8ea3884>] cfg80211_inform_bss_frame+0x114/0x180 [cfg80211] [38573.102007] [<f97255ff>] ieee80211_bss_info_update+0x4f/0x180 [mac80211] [38573.102007] [<f972b118>] ieee80211_rx_bss_info+0x88/0xf0 [mac80211] [38573.102007] [<f9739297>] ? ieee802_11_parse_elems+0x27/0x30 [mac80211] [38573.102007] [<f972b224>] ieee80211_rx_mgmt_probe_resp+0xa4/0x1c0 [mac80211] [38573.102007] [<f972bc59>] ieee80211_sta_rx_queued_mgmt+0x919/0xc50 [mac80211] [38573.102007] [<c1009707>] ? sched_clock+0x27/0xa0 [38573.102007] [<c1009707>] ? sched_clock+0x27/0xa0 [38573.102007] [<c105ffd0>] ? mark_held_locks+0x60/0x80 [38573.102007] [<c1348be5>] ? _spin_unlock_irqrestore+0x55/0x70 [38573.102007] [<c134baa5>] ? sub_preempt_count+0x85/0xc0 [38573.102007] [<c1348bce>] ? _spin_unlock_irqrestore+0x3e/0x70 [38573.102007] [<c12c1c0f>] ? skb_dequeue+0x4f/0x70 [38573.102007] [<f972c021>] ieee80211_sta_work+0x91/0xb80 [mac80211] [38573.102007] [<c1009707>] ? sched_clock+0x27/0xa0 [38573.102007] [<c134baa5>] ? sub_preempt_count+0x85/0xc0 [38573.102007] [<c10479af>] worker_thread+0x18f/0x320 [38573.102007] [<c104794e>] ? worker_thread+0x12e/0x320 [38573.102007] [<c1348be5>] ? _spin_unlock_irqrestore+0x55/0x70 [38573.102007] [<f972bf90>] ? ieee80211_sta_work+0x0/0xb80 [mac80211] [38573.102007] [<c104cbb0>] ? autoremove_wake_function+0x0/0x50 [38573.102007] [<c1047820>] ? worker_thread+0x0/0x320 [38573.102007] [<c104c854>] kthread+0x84/0x90 [38573.102007] [<c104c7d0>] ? kthread+0x0/0x90 [38573.102007] [<c1003ab7>] kernel_thread_helper+0x7/0x10 Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-02wireless: update reg debug kconfig entryLuis R. Rodriguez
Refer to the wireless wiki for more information. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28nl80211: jump to out_err upon unsupported iftypeRoel Kluin
Jump to out_err when the iftype is not supported. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28cfg80211: clean up properly on interface type changeJohannes Berg
When the interface type changes while connected, and the driver does not require the interface to be down for a type change, it is currently possible to get very strange results unless the driver takes special care, which it shouldn't have to. To fix this, take care to disconnect/leave IBSS when changing the interface type -- even if the driver may fail the call. Also process all events that may be pending to avoid running into a situation where an event is reported but only processed after the type has already changed, which would lead to missing events and warnings. A side effect of this is that you will have disconnected or left the IBSS even if the mode change ultimately fails, but since the intention was to change it and thus leave or disconnect, this is not a problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28cfg80211: make spurious warnings less likely, configurableJohannes Berg
Bob reported that he got warnings in IBSS mode about the ssid_len being zero on a joined event, but only when kmemcheck was enabled. This appears to be due to a race condition between drivers and userspace, when the driver reports joined but the user in the meantime decided to leave the IBSS again, the warning would trigger. This was made more likely by kmemcheck delaying the code that does the check and sends the event. So first, make the warning trigger closer to the driver, which means it's not locked, but since only the warning depends on it that's ok. And secondly, users will not want to have spurious warnings at all, so make those that are known to be racy in such a way configurable. Reported-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28cfg80211: check lost scans later, fix bugJohannes Berg
When we lose a scan, cfg80211 tries to clean up after the driver. However, it currently does this too early, it does this in GOING_DOWN already instead of DOWN, so it may happen with mac80211. Besides fixing this, also make it more robust by leaking the scan request so if the driver later actually finishes the scan, it won't crash. Also check in ___cfg80211_scan_done whether a scan request is still pending and exit if not. Reported-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: allow cfg80211_connect_result with bssid == NULLZhu Yi
In case of connection failure, the bssid info is not a must have. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: fix leaks of wdev->conn->ieDavid Kilroy
This only occurs in the following error situations: - driver calls connect_result with failure - error scheduling authentication on connect - error initiating scan (to get BSSID and channel) on connect - userspace calls disconnect while in the SCANNING or SCAN_AGAIN states Signed-off-by: David Kilroy <kilroyd@googlemail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: fix dangling scan request checkingJohannes Berg
My patch "cfg80211: fix deadlock" broke the code it was supposed to fix, the scan request checking. But it's not trivial to put it back the way it was, since the original patch had a deadlock. Now do it in a completely new way: queue the check off to a work struct, where we can freely lock. But that has some more complications, like needing to wait for it to be done before the wiphy/rdev can be destroyed, so some code is required to handle that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: report userspace SME connected event properlyJohannes Berg
Instead of hacking the event reporting into the __cfg80211_connect_result() function which is also invoked by others, set up things correctly and then invoke that function, so that it can do more sanity checking. Also, it is currently not possible to get a ROAMED event from the userspace SME anyway since we send out a DISCONNECTED event when it disassociates and then a new CONNECTED event on the next association. Thanks to Zhu Yi for pointing out that the code is somewhat convoluted and doesn't warn when it should. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: fix deadlockJohannes Berg
When removing an interface with nl80211, cfg80211 will deadlock in the netdev notifier because we're already holding rdev->mtx and try to acquire it again to verify the scan has been done. This bug was introduced by my patch "cfg80211: check for and abort dangling scan requests". To fix this, move the dangling scan request check into wiphy_unregister(). This will not be able to catch all cases right away, but if the scan problem happens with a manual ifdown or so it will be possible to remedy it by removing the module/device. Additionally, add comments about the deadlock scenario. Reported-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Christian Lamparter <chunkeey@web.de> Tested-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: export cfg80211_wext_siwfreqJussi Kivilinna
cfg80211_wext_siwfreq() should be exported with EXPORT_SYMBOL_GPL. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: allow driver to override PS defaultJohannes Berg
Sometimes drivers might have a good reason to override the PS default, like iwlwifi right now where it affects RX performance significantly at this point. This will allow them to override the default, if desired, in a way that users can still change it according to their trade-off choices, not the driver's, like would happen if the driver just disabled PS completely then. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: check for and abort dangling scan requestsJohannes Berg
If you trigger a scan request on an interface and then take it down, or rmmod the module or unplug the device the driver might "forget" to cancel the scan request. That is a bug in the driver, but the current behaviour is that we just hang endlessly waiting for the netdev refcount to become 0 which it never will. To improve robustness, check for this situation in cfg80211, warn about it and clean up behind the driver. I don't just clean up silently because it's likely that the driver also has some internal state it has now leaked. Additionally, this fixes a locking bug, clearing the scan_req pointer should be done under the rdev lock. Finally, we also need to _wait_ for the scan work and not just abort it since it might be pending and wanting to do a cleanup. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14trivial: remove duplicate "different" from commentThadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: Use 3-address format for mesh broadcast frames.Javier Cardona
The 11s task group recently changed the frame mesh multicast/broadcast frame format to use 3-address. This was done to avoid interactions with widely deployed lazy-WDS access points. This patch changes the format of group addressed frames, both mesh-originated and proxied, to use the data format defined in draft D2.08 and forward. The address fields used for group addressed frames is: In 802.11 header ToDS:0 FromDS:1 addr1: DA (broadcast/multicast address) addr2: TA addr3: Mesh SA In address extension header: addr4: SA (only present if frame was proxied) Note that this change breaks backward compatibility with earlier mesh stack versions. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: add missing device list lockingJohannes Berg
When calling into the wext code from the NETDEV_UP notifier, we need to hold the devlist_mtx mutex as the wext code ends up calling into channel checks. Reported-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: remove max_bandwidthPat Erley
This removes the max_bandwidth attribute. It is only ever written to, and is duplicated by max_bandwidth_khz in the regulatory code. Signed-off-by: Pat Erley <pat-lkml@erley.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix locking for SIWFREQJohannes Berg
"cfg80211: validate channel settings across interfaces" contained a locking bug -- in the managed-mode SIWFREQ call it would end up running into a lock recursion. This fixes it by not checking that particular interface for a channel that it needs to stay on, which is as it should be as that's the interface we're setting the channel for. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Reported-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Kalle Valo <kalle.valo@iki.fi> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix alignment problem in scan requestJohannes Berg
The memory layout for scan requests was rather wrong, we put the scan SSIDs before the channels which could lead to the channel pointers being unaligned in memory. It turns out that using a pointer to the channel array isn't necessary anyway since we can embed a zero-length array into the struct. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14nl80211: add generation number to all dumpsJohannes Berg
In order for userspace to be able to figure out whether it obtained a consistent snapshot of data or not when using netlink dumps, we need to have a generation number in each dump message that indicates whether the list has changed or not -- its value is arbitrary. This patch adds such a number to all dumps, this needs some mac80211 involvement to keep track of a generation number to start with when adding/removing mesh paths or stations. The wiphy and netdev lists can be fully handled within cfg80211, of course, but generation numbers need to be stored there as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: use reassociation when possibleJohannes Berg
With the move of everything related to the SME from mac80211 to cfg80211, we lost the ability to send reassociation frames. This adds them back, but only for wireless extensions. With the userspace SME, it shall control assoc vs. reassoc (it already can do so with the nl80211 interface). I haven't touched the connect() implementation, so it is not possible to reassociate with the nl80211 connect primitive. I think that should be done with the NL80211_CMD_ROAM command, but we'll have to see how that can be handled in the future, especially with fullmac chips. This patch addresses only the immediate regression we had in mac80211, which previously sent reassoc. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: validate channel settings across interfacesJohannes Berg
Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: Set WEP ciphersSamuel Ortiz
With iwconfig there is no way to properly set the ciphers when trying to connect to a WEP SSID. Although mac80211 based drivers dont need it, several fullmac drivers do. This patch basically sets the WEP ciphers whenever they're not set at all. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix SME association after disassociationJohannes Berg
When an AP disassociates us, we currently go into a weird state because the SME doesn't handle authenticated but not associated well unless it's within its own state machine, it can't recover from that. However, it shouldn't need to, since we don't do any decisions in it really -- so when we get disconnected, simply deauthenticate too. Reported-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix nl80211 disconnected eventsJohannes Berg
When reporting a disconnection to userspace, we try to report whether it was from the AP or by our own choice. However, we misreported a broadcast deauth or disassoc as being by own choice, which is wrong. Fix this by checking the sender address instead of the destination address. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix disassociation warning due to misuse of wdev->current_bssPavel Roskin
WARN_ON was triggered at mlme.c:213 when dissociating from an AP. wdev->current_bss->pub.bssid should be used in place of wdev->current_bss for BSSID comparison. Signed-off-by: Pavel Roskin <proski@gnu.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wireless: display wext SSID when connected by cfg80211Zhu Yi
cfg80211 displays correct link info when connected by wext. But if the connection is setup by cfg80211, wext cannot display the SSID. This patch fixed this issue. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-04cfg80211: clear SSID on disconnect/no connectionJohannes Berg
The SME state machine in cfg80211 uses the SSID stored in struct wireless_dev internally, but fails to clear it in multiple places (when giving up on a connection attempt and when disconnecting). This doesn't matter to the SME state machine, but does matter for IBSS. Thus, in those cases, clear the SSID to avoid messing up the IBSS state machine. Reported-by: Joerg Albert <jal2@gmx.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 23:02:15 +0000